Відео

Awesome, glad it helped you out!

Have you seen my other video where I use 125lb monofilament fishing leader? I use the monofilament as I believe it would hold up better than braided and the thickness of the 125lb test is close to the same as the lift cord. It’s been about 6 months now and the blinds are still all working great with no more broken cords. ua-cam.com/video/JtuiHNOF0cE/v-deo.htmlsi=iPMzhQ0XQOQ6_Nh1

Sorry, I’m not sure what shade you are referring to.

The sensors actually use ultrasound to measure the distance to the top of the liquid propane from where they are placed on the bottom of the tank. They do not measure the weight of the tank.

Yes, they do compensate and adjust accordingly for temperature.

🤣💦

Thanks Christina! 😉 Pretty simple actually. No glue or staples, just put the material in place and the furniture holds it to the subfloor as all furniture is secured down with screws.

You’re very welcome! You’ll want to check out this one as well before you buy your blind cord. RV BLIND (Day/Night Shade) PERMANENT REPAIR - No More ReStringing!! ua-cam.com/video/JtuiHNOF0cE/v-deo.html

Unfortunately, this ladder is only rated for up to 250 lbs. However, there are a few other telescoping ladder brands out there that are rated for up to 400lbs, although I did not see any that were “A frame” like ours, only straight extension.

Hey Lars, yes, I did. They work ok, but, not as well as the fresh water tank sensor. The fresh water tank bottom is flat and the grey tank bottoms are sloped, so, it’s very difficult to find a level spot for the sensor. And, you’ll also need to place it near the lowest part of the tank which is close to the drain. Once again, our heater pads made that a challenge. They do give us insight on where we are with our levels, however, the readings are sometimes a little inconsistent. That being said, they are still working far better than the original tank sensors.

You are most welcome Duncan! Were you able to get your issue resolved?

@@EddieAtLarge Hi Eddie, Unfortunately it wasn’t the answer but well worth the time checking. Thanks again as it may well have solved the problem. I don’t actually think the gas is getting through even to the pilot light. Ha ha ha the joys of motor homing 🤣 All the very best Duncan.

Ahhh, sorry to hear that it hasn’t worked out yet. Keep at it and I’m sure you’ll solve the issue with more persistence. And yes, we never get bored while maintaining our rigs! Safe travels. ✌🏻

@@EddieAtLarge 🙋‍♂️👍🏻

Hey Mark, We ordered ours through our RV dealer in Palm Desert, CA for $300 (including shipping &tax). Because the the newer model of our camper has this same material, we were able to get ours cut to the exact size & have the edge bound at the factory. You can however get this same material from Trekwood RV Parts & Supply online. When you order from Trekwood, you would order the size you need and then you would need to take it to an upholstery shop to bind the edge unless you know how to do that. I know Hobby Lobby sells binding material and other people have used industrial hot glue to adhere it to the edge, however, I've never tried that and I think I would prefer to have it sewn on. Here'a a link to the same material that we installed that's on Trekwood's website. www.trekwood.com/products/1472514/S-O-Carpet-48-x-186-JubilationSoulfulGrey-Yukon They do have other size (and maybe other color) options available. You may want to call them as their website isn't very easy to search and navigate. I used the keyword "jubilation" to search their site as that is the color that we have. Type that keyword in and click through the pages to find other size options. Feel free to let me know if you have any other questions.

Affordable RVing in Milwaukie, Oregon

Awesome! Glad it all worked out. Safe travels!!

Have you tried Trekwood.com? It appears it is still available on their website. www.trekwood.com/products/1472514/S-O-Carpet-48-x-186-JubilationSoulfulGrey-Yukon

Hi Ron, glad this was helpful! I do have an updated video where I have installed high strength fishing leader in lieu of the lift cord. The new lift cord kept breaking on me. I’ve now installed the fishing leader on all my blinds and it’s been great! RV BLIND (Day/Night Shade) PERMANENT REPAIR - No More ReStringing!! ua-cam.com/video/JtuiHNOF0cE/v-deo.html

OK. If it is only compatible with Lippert and not actually the Lippert brand, I would recommend ordering the one that is the Lippert brand.

I just measured the bump outs on my leg outside outside and it measures exactly 15 1/2 inches. I then measured the welded brackets and they measure 15 3/8 inches outside outside. I knew there was some wiggle room there for when I installed the leg, which ends up being 1/8 inch. I would say that you will need to return the leg as you should have that extra 1/8 inch of room to play with. I’m thinking it would not be a good idea to try to file it down and force it to fit. Did you order this from Amazon? Is it the Lippert brand leg?

There are supports on both sides of the leg

You should be able to install it in any type of RV. We ordered ours through our RV dealer in Palm Desert, CA for $300 (including shipping &tax). Because the the newer model of our camper has this same material, we were able to get ours cut to the exact size & have the edge bound at the factory. You can however get this same material from Trekwood RV Parts & Supply online. When you order from Trekwood, you would order the size you need and then you would need to take it to an upholstery shop to bind the edge unless you know how to do that. I know Hobby Lobby sells binding material and other people have used industrial hot glue to adhere it to the edge, however, I've never tried that and I think I would prefer to have it sewn on. Here'a a link to the same material that we installed that's on Trekwood's website. www.trekwood.com/products/1472514/S-O-Carpet-48-x-186-JubilationSoulfulGrey-Yukon They do have other size (and maybe other color) options available. You may want to call them as their website isn't very easy to search and navigate. I used the keyword "jubilation" to search their site as that is the color that we have. Type that keyword in and click through the pages to find other size options. Feel free to let me know if you have any other questions.

It’s a Surron.

It’s magic! 🪄 😆

You’re very welcome! I did however find a better solution for the string replacement. Please see this updated video.

You’re very welcome! I did however find a better solution for the string replacement. Please see this updated video. RV BLIND (Day/Night Shade) PERMANENT REPAIR - No More ReStringing!! ua-cam.com/video/JtuiHNOF0cE/v-deo.html

I noticed on the product you used it has a nice edge on it

We ordered ours through our RV dealer in Palm Desert, CA for $300 (including shipping &tax). Because the the newer model of our camper has this same material, we were able to get ours cut to the exact size & have the edge bound at the factory. You can however get this same material from Trekwood RV Parts & Supply online. When you order from Trekwood, you would order the size you need and then you would need to take it to an upholstery shop to bind the edge unless you know how to do that. I know Hobby Lobby sells binding material and other people have used industrial hot glue to adhere it to the edge, however, I've never tried that and I think I would prefer to have it sewn on. Here'a a link to the same material that we installed that's on Trekwood's website. www.trekwood.com/products/1472514/S-O-Carpet-48-x-186-JubilationSoulfulGrey-Yukon They do have other size (and maybe other color) options available. You may want to call them as their website isn't very easy to search and navigate. I used the keyword "jubilation" to search their site as that is the color that we have. Type that keyword in and click through the pages to find other size options. Feel free to let me know if you have any other questions.

Sorry, I’m not sure. You will need to speak to your local Ford dealers parts department to ensure you order the correct one for your truck’s year, make & model if it’s available.

I would always start with the jack. Had both left and right go bad on us in 4 years of full time travel. Thought the same that the motor may have been bad, so, bought an extra to carry with us in case it ever does. There’s also a gear box that attaches to the motor. Bought an extra one of those as well.

Can you just install a rebuild kit in the lead and follow leg?

Yes, you should be able to do that. They sell them on Amazon.

We ordered ours through our RV dealer in Palm Desert, CA for $300 (including shipping &tax). Because the the newer model of our camper has this same material, we were able to get ours cut to the exact size & have the edge bound at the factory. You can however get this same material from Trekwood RV Parts & Supply online. When you order from Trekwood, you would order the size you need and then you would need to take it to an upholstery shop to bind the edge unless you know how to do that. I know Hobby Lobby sells binding material and other people have used industrial hot glue to adhere it to the edge, however, I've never tried that and I think I would prefer to have it sewn on. Here'a a link to the same material that we installed that's on Trekwood's website. www.trekwood.com/products/1472514/S-O-Carpet-48-x-186-JubilationSoulfulGrey-Yukon They do have other size (and maybe other color) options available. You may want to call them as their website isn't very easy to search and navigate. I used the keyword "jubilation" to search their site as that is the color that we have. Type that keyword in and click through the pages to find other size options. Feel free to let me know if you have any other questions.

The area under the booth seating is held down by the furniture that is screwed into the floor. We only put one screw (with a washer) in the back left corner behind the seats just to hold that in place until the recliners were reinstalled. The recliners are then secured to the slide floor with screws from underneath and that holds the flooring in place for that section. If your setup is different, I would recommend using small staples along the side and rear perimeter or you may want to glue it down along the edges and leave the remaining “floating” We ordered ours through our RV dealer in Palm Desert, CA for $300 (including shipping &tax). Because the the newer model of our camper has this same material, we were able to get ours cut to the exact size & have the edge bound at the factory. You can however get this same material from Trekwood RV Parts & Supply online. When you order from Trekwood, you would order the size you need and then you would need to take it to an upholstery shop to bind the edge unless you know how to do that. I know Hobby Lobby sells binding material and other people have used industrial hot glue to adhere it to the edge, however, I've never tried that and I think I would prefer to have it sewn on. Here'a a link to the same material that we installed that's on Trekwood's website. www.trekwood.com/products/1472514/S-O-Carpet-48-x-186-JubilationSoulfulGrey-Yukon They do have other size (and maybe other color) options available. You may want to call them as their website isn't very easy to search and navigate. I used the keyword "jubilation" to search their site as that is the color that we have. Type that keyword in and click through the pages to find other size options. Feel free to let me know if you have any other questions.

Thank you for all the information. ​@@EddieAtLarge

Yes, it needs to be on the bottom of the tank for it to work.

We take it down before we move. I did a permanent cable run so it is now very quick to install or remove the dish. Here’s a link to that video. STARLINK RV ROOF MOUNT PERMANENT CABLE INSTALLATION ua-cam.com/video/CKsdDV-yQzQ/v-deo.html

Glad this was helpful! I wish there was an easy fix for your hard to open windows. Fortunately for us, we’ve never had that issue, however, our friends do have the issue and they have not found an easy solution. The windows would most likely need to be removed and reset. If you happen to find an easier fix, please come back to let me know so we can inform our friends. Thanks!

@@EddieAtLarge I sure will.

😂

We ordered ours through our RV dealer in Palm Desert, CA for $300 (including shipping &tax). Because the the newer model of our camper has this same material, we were able to get ours cut to the exact size & have the edge bound at the factory. You can however get this same material from Trekwood RV Parts & Supply online. When you order from Trekwood, you would order the size you need and then you would need to take it to an upholstery shop to bind the edge unless you know how to do that. I know Hobby Lobby sells binding material and other people have used industrial hot glue to adhere it to the edge, however, I've never tried that and I think I would prefer to have it sewn on. Here'a a link to the same material that we installed that's on Trekwood's website. www.trekwood.com/products/1472514/S-O-Carpet-48-x-186-JubilationSoulfulGrey-Yukon They do have other size (and maybe other color) options available. You may want to call them as their website isn't very easy to search and navigate. I used the keyword "jubilation" to search their site as that is the color that we have. Type that keyword in and click through the pages to find other size options. Feel free to let me know if you have any other questions.

We ordered ours through our RV dealer in Palm Desert, CA for $300 (including shipping &tax). Because the the newer model of our camper has this same material, we were able to get ours cut to the exact size & have the edge bound at the factory. You can however get this same material from Trekwood RV Parts & Supply online. When you order from Trekwood, you would order the size you need and then you would need to take it to an upholstery shop to bind the edge unless you know how to do that. I know Hobby Lobby sells binding material and other people have used industrial hot glue to adhere it to the edge, however, I've never tried that and I think I would prefer to have it sewn on. Here'a a link to the same material that we installed that's on Trekwood's website. www.trekwood.com/products/1472514/S-O-Carpet-48-x-186-JubilationSoulfulGrey-Yukon They do have other size (and maybe other color) options available. You may want to call them as their website isn't very easy to search and navigate. I used the keyword "jubilation" to search their site as that is the color that we have. Type that keyword in and click through the pages to find other size options. Feel free to let me know if you have any other questions.

🤣