Kyosho Inferno NEO ST 3.0 - Episode 4 - Engine Break in and first run
Вставка
- Опубліковано 13 вер 2019
- Join us in Episode 4 of our Kyosho Inferno NEO ST 3.0 video series where we fuel and fire up the stadium truck for the very first time, before we slowly break in the engine and see it in action straight out of the box.
What as we also use a break in plug for the first time from kyosho, and show you the final bag that came with the kit, containing all the tools you need.
Please subscribe, rate and comment
Watch out for Episode 5 where we really stat having some fun with the Kyosho Inferno NEO ST 3.0
Part number: 33016B
Engine: KE25SP
2.4GHz transmitter (KT-231-P)
Optifuel Race Mix
25% nitro
Enjoy 😊 - Авто та транспорт
I bought an inferno back in 1997 still Have it, never knew about break in back then just built it and drove it flat out. Bridgestone tyres wrecked in a day, but engine never gave any trouble except for the pull start.
Could you post some pictures?
This thing looks sick.
Nice dude i like thee vids
Thanks, great to hear, glad you're enjoying them :) 👍
great vid . maybe start with an engine heater or a heatgun/hair dryer . helps it get to operating temp faster and is much easier on the engine for break ins.. will increase the longevity by 2 or 3 fold...keep the vids coming.. also always check your slide gap before running . its should just fully open when throttle is pinned and still leave a small .50 mm gap on full brake..
I remember the first NEO back in 2011 that truggy actually was Raceable has looked like it was designed to race, this one looks like it’s more for sport and fun!
All brands are putting out base models that are less than, but it makes nitro more available for everyone.
Awesome video ! What kind of tires and wheels are those ? They look so wide!
I missed it. What point did u take the carb intake limiter disc out?
Can you give me any more advice on this ? Mine is coming to Scotland 🏴 next few days I will upload some videos when it comes 😁
oo man this thing is mean looking
👍👍👍👍👍
Nice... It's nitro time and I love it!
100% 😀😁
You recommend 16% oil for break in. I have 12% oil content available, what’s your opinion. I might be able to get some 14% but nothing higher than that.
Why did you let it idle for 3 tanks lol
Great video guys, the chap in the background with the Kyosho Inferno Neo 3.0 Readyset with the
. 21cc engine, what are his needles like as im having trouble setting mine up. Thank
Thanks buddy. I'll find out for you and let you know 👍. Hopefully we'll be able to make a video of it soon too!
@@RCEmpire_HQ thanks mate. Hopefully you do as it would help loads of people who are new to the game with tuning up there engines, thanks again.
How long did this take you?
Hello, congrats for your videos, are great! I have the same car than you. I have a doubt, which fuel do you use? 16% or 25% nitro? After the break-in of the engine, did you have to adjust the carburetor regulations??
(The author is unworthy to answer)
25% nitro is just fine, and ofcourse you have to adjust the settings, otherwise you cant take the full potential of any nitro engine.
Where can you get one of those break in plugs?
I was following the direcrions in this video but in my 2nd attempt to turn it on some fuel dripped from tye exhaust. My glow plug was drained so I could not turn it on again. Was that normal?
Hi there. Did you get it started? Yep that sounds normal. Sounds like it's super rich which is normal to begin with, with lots of unburnt fuel and oil. I would hold the throttle down for a split seconds as you try to start it, just to let more air into the carb. I did actually open the idle screw a tiny tiny bit too.
Always Pre heat engine first before pulling the pull start.. U can damage the engine and break the pull start and it will make it easier for you on your hands.. No blisters 😕
How ? What do you mean ?
@@ausreefguy5362 with a heat gun. You can just use it to heat up the engine a little bit before attempting to start it. So it would have some heat in engine already to make it easier to start generally 👍
Same with Kyosho Inferno Neo ST RaceSpec ReadySet
It is?
HI there. Yep, it will be exactly the same process.
Where can I buy that RC fuel at
Excelent. Have you test the Kyosho FO-XX Nitro ReadySet 1/8 4WD Monster Truck?
No unfortunately not. We'd really love to though. We'll keep an eye out for one.
@@RCEmpire_HQ Yes, me too. I´ll enjoy the comparison with the buggy Kyosho Inferno Neo 3.0. I want to buy one of them.
Do a other video with this please
Hi , please can you help me tune my engine in kyosho inferno Neo st 3.0.
Ah, that nitro smel! Ireplaceable.
Cant beat it 😅👌
Should you break it in on the same day? Or can you do it over a couple?
Hi there. Absolutely you can. Eg, I'd run the 3 or 4 tanks of fuel though it with the wheels off the ground on one day, and then when I get the chance, go out and finish it off by doing the slow runs etc.
The carburetor of that car only has 2 needles right? High speed needle and idle needle
Hi there. It will be 3 if you include the Idle screw :), so Low speed needle, High speed needle, and the idle screw.
Those the carb have low speed need? Or just high speed needle and idle?
Yep, this one's got a low speed, high speed and an idle. Although to be honest, I haven't touched the low speed one yet.
Where is the idle needle? I can only see high speed and low speed. Any help will be great I just got one and now the revs are too high and tries to take off upon starting the engine
How van fast he can go
Hi I have the model down from yours and it is over revving when it's standing still and moving forwards I'm not sure if you can adjust the screws on the engine to turn down the revs if you have any advice please thank you
Hi there! Hmmm, Yeah I think that's where I'd start, with the idle screw. If you take off the air filter and check the gap in the carburettor, it should be around 1mm. If this is too big, it will allow too much air in at idle, and over rev. If it's too small, the car will cut out or possibly not even start.
Also make sure your trims are set correctly on the transmitter. I try to keep them neutral (in the middle) when tuning or turning any screws.
Try that and then we'll see :)
To ill try that
Thanks m8
it's interesting seeing the break in difference between a company like this and traxxas...i feel traxxas makes more sense then idle for 3 tanks.....you need load on things to set in right
What is the purpose of the zip ties on the engine heatsink?
Just to protect the top from getting scratched if we flip it. Not perfect but they do help. We've ordered some proper caps to protect it through .
I have a Kyosho inferno NEO ST
I mess with the high and low, idle, i mess it up. When start the car it really high acceleration. Can you please help me to reset the factory reset.
Happened to me with my losi, there's in the manual how to revert it to stock
Anyone have the default carb settings for this engine?
Read the manual, but in general, the needles must be in flush position.
Can i install a Reds Engine in my inferno neo 3.0?
Yes
Do I have to use a heat gun when I first started. It won’t start when the engine is cold huh?
Hi there. Hmmm, to be honest, I've never used a heat gun for any car, even in the cold haha. It should be okay. Possibly check your glow plug and glow ignitor are good, and you're getting a nice bright glow from the plug. I find the R8 glow plugs give plenty of heat for starting in the cold. But the one in there should be okay.
Hi guys, is it compulsory too have the break in plug, thanks
No it isnt compulsory its only to help you break it in if you do not know how to/ is your first time
Tip, never put your transmitter on the exhaust tip side of the car.
Never break in your engine at that low of temps. 205 is what you should preheat to before ever starting it up. Then keep it there the entire time. Let it cool without letting it run dry and repeat the process about 5 times.
It's in Celsius
Film from Redditch?
The key to those fuel bottles is don't use the cheap crap ones, buy a good one lol.
Ahhh okay 😆, I knew It couldn't have just been me haha. Never got on with them 😅
RC Empire The good ones are much better quality, the cheap ones like you have there work okey but they’re so thin man!
Do they offer one with a 2 speed ?
Hi there, no, not this model.
Is that your dad helping you
i have a courius question,what are the ty ribs on your engine??
How long does it take to run one tank ? :P
Un réservoir tien 8 à 15 minutes
What %tage fuel is that?
This one is 25%
That's weird that you have to Break in Nitro engines differently. Like the videos I have seen on Traxxas and so on I've never seen the idle part before?
Really! They just start running them straight out the box? I wonder if they're pre broken in. Kyosho do that with some of their models now.
❤😂🎉😢😮ไฟไฟพำสาล
what's the top speed of this stadium truck?
The most asked question haha. We'll definitely do a speed run this month 👍
Fast enough ha ha.
10 tanks in and still can't full trottle
Yea I’m on 7. Same here. What do you do
no dices las bueltak das en bajas ni altas ,solo das cortes para tocar las altas y bajas ,asi no enseñas bien a tus seguidores