Kyosho MP9 TKI4 RTR/Ready-Set - BREAK IN!!!
Вставка
- Опубліковано 26 сер 2024
- Hello to all my subscribers and welcome all who are new to my channel!
In this video I will be breaking in the awesome Kyosho Inferno MP9 TKI4 RTR 1/8th scale nitro cross buggy. In my opinion, this is one of the best (if not the best) 1/8th scale buggy of it's kind. After owning the kit spec and racing myself I can most certainly agree with that statement - it actually improved my driving skill!!! The ready set buggy looks to be of a very high quality - looking forward to get some more running vids soon!!
Hope you enjoy the video - a like and subscribe is always appreciated for my work.
Until next time...
INNGOT🚀
HRP finally....finally has the Savage X 4.6 back in stock after years of not putting one out. At least here in the States.
Chris from HRP is a man of his work and after email after email after email he let me know they will be back in stock as soon as Friday. And Bam! the Legend is back!
I bought it immediately and can wait to break it in and get after it
Sorry, just wanted to share
That’s awesome to know - my favourite truck!! 🤜🤛
A less crude way (if the pipe is cool) to prime the engine is to just put your finger over the exhaust exit and pull a few times and it will prime it fine. Adding heat to the engine is only necessary when it's very cold, let it warm naturally from combustion. Other than those two points your vehicle looks good.
Fantastica...bel video ...ottimo rodaggio !!!... ciao dall'Italia
Great video buddy. Just subbed. But if there's one tip I would give its not to blow down the fuel line. Nitro fuel is carcinogenic so I'd try and avoid any contract like that. I used to use a 10ml syringe to push the fuel through. Worked a treat. Keep the great videos coming. 👌👍
Thanks buddy! Been doing it for years that way, the fuel never actually comes in contact with your mouth so should be fine. Appreciate your concern though 🤝💥🔥⛽️🚀
@@inngotrcexperience6716 I prime the same way 👍🏻
Just got mine waiting for the fuel to arrive great vid !
if you pinch the tube you pulled off to prime and then lift and plop the fuel door it will do the same as blowing in the line. just a little fyi ..great video i am considering this car for my next purchase...
mine arrived today . waiting for my break in fuel from Bones then its ON!!!!!!
😎👌
Kyosho really puts together a great quality product. Would like to add this as my Buggy for sure....
You're doing some great vids....... and your place is just gorgeous.....
yopacific Thank you 🙏 yes, they’re a great company- their competition range and RTR selection are fantastic quality
A moi mi metti i stranieri cazzo . A moo ai perso van culo
doin' well...kyosho are good RC / very durable..
Waiting for mine it’s on it way in the mail Asome content thanks !!!! 💪💪👌👌
Michael Brignoni Thanks bro!! That’s awesome to hear, great buggy!!! 🤝🚀⛽️🔥💥
Where you order yours?
oh yes sweet, very very sweet and tender car...
Good after run is 5050 marvel mystery oil and auto trans fuid.....at least that's we use in the nitro to airplanes for yrs with no issues
Love these vids keep it up
Ivan Delgadillo Thanks bro!! 🤝🔥⛽️💥🚀
Great vid like always buddy. Can’t wait to get my MP10.
Jimmy James Cheers buddy! Aw hell yes bro - I looooove mine! MP10 in my opinion is the greatest ever made by Kyosho - a work of art in terms of design and handling 🔥⛽️💥🚀
Nice video bro,i have kyosho mp777 convert to electrik and it's still awesome,hoping got kyosho buggy engine for now
Ndar Niki 🤜🤛🔥💥⛽️🚀
Awesome
Plus there’s a $30 coupon code at the top of their page and they don’t charge tax because I guess they ship it from Utah.
All in a brand new Savage X 4.6 cost only $469.99
I bought a brand new Tmaxx 3.3 two weeks ago from Hobbytown and with tax it cost like $523. That a big difference
Makes me want to add a nitro to the 1/5 baja collection! Id have to go with the savage if i did but i love designing first ever 1/5 builds that no one has done especially with the baja max platform i just dont think i could let myself spend 6 $700 on a nitro when i could start a new build with that $ ya know? 😆 Where are you from bro? Your Most definitely not in the us! Haha👍
fifth scale or bust Haha, do it bro - you’d love nitro 2 stroke - like a little angry bee 🐝 😂 I see what you mean bro - financial restrictions are a pain.... from South Wales UK bro 🤜🤛🔥🚀💥⛽️
I really enjoy your videos and the vehicles you’ve chosen I just wish you would take out the explosions at the beginning. They’re very unpleasant to listen to. Good luck with this new MP9. Thinking of getting one for myself.
GrotrianSeiler Thanks for the comment and your feedback- I appreciate that - I will turn down the volume so that it’s not so loud on the introduction 🤝
Yeaa!!!
Engine cool, readyset the worst decision I made when purchasing first kyosho, save yourself the time and money and buy a kit roller
Cody Cray I already have both MP9 TKI4 10th anniversary edition and MP10 race kits - done some racing myself - I bought this to see what the Ready-set package has to offer and was definitely not unimpressed- I think for those who cannot afford the full expense of a race kit (in excess of a £1000 with everything....) then this is a very good option in my opinion
Can you do a vid on setting end points for kyosho mp9
Did you use the break in carb restrictor that comes with the car ?
what glow plug do u use for winter weather and summer..?? any recommendations im clueless..
Sweeeeeeeet 👌
oliver wilkins 🤜🤛🔥⛽️💥🚀
Hi, I like your video. Can you explain what oil you put in the engine before you start this break in? 😊
Thanks! 3 in 1 oil, you can buy from most hardware stores
Hello, I'm from Germany, I think about buying this Car, I never had a Nitro Car before but I've drivven a lot with an Electric Car...
Is this Car good ?!
I mean fast, ..... Buy or not?
Sorry for writing fails 😬
Yes, it’s a very good car however if it’s your first nitro purchase then I suggest going for something less expensive as your first model.
Hello, does this model have a two speed transmission or is it just one speed. Thanks
Single speed
Im gonna save up for a new buggy, instead of fixing my old Inferno MP7.5.
Which should i buy, a Neo 3.0 RTR kit, or this ? :D
Probably too late, but the Neo 3.0 is literally a modern MP7.5, chassis parts between the two are interchangeable
What temperature is the engine supposed to run at great videos want to get back into inferno buggy’s after leaving them since having an mp6 I’m selling all my electric RCs to get this tki4 👍
adewashere No more than 240 degrees Fahrenheit in theory however - my engines often go over this point and they run perfect. As long as they sound healthy, good performance and blue smoke 🤜🤛🔥💥🚀⛽️
INNGOT RC EXPERIENCE thanks for the reply going back to nitro and this is the buggy I’m going for is that 3 in 1 oil good for the engines I’ve always used oil from Modelshops for my nitro trucks
adewashere Best RTR buggy platform in my opinion- it’s a fantastic platform! 3 in 1 is great stuff - been using for years and it’s done nothing but good things to my engines
INNGOT RC EXPERIENCE is it ok to break the engine in on these buggy’s using the 25% nitro fuel or do I have to start on 16% then go upto 25% later cheers
adewashere I use the fuel I will eventually be running the car on so 25%
Hi, great video! Just got mine yesterday. Will you make a video of the engine tune?
Thanks
luis sa Thanks!! Yes, I intend on doing one at some point 🤝
@@inngotrcexperience6716 after your break in did you mess with the low speed and idle screw? or just with the hight speed? Because the motor seems to came from the factory just rich on the high speed. just lean it a little bit.
luis sa Yes, leaned out low speed and lowered idle
@@inngotrcexperience6716 Last question XD How many turns we lean the low speed and how many turns you lowered the idle? Thank you very much for the help!
luis sa no problem, happy to help 🤝 unfortunately, I cannot give an exact answer - every engine is different- it’s something you have to judge for yourself
Hey can you give me a detailed breakdown on what your break in process is I got a couple shelf queens right now it’s winter I have a hpi savage x 4.6/the keyosho in this video and a keyosho mad crusher all waiting on summer time to break in and use I’m just curious at the end of the day I usually idle 4 tanks and then 5-6 I drive but not WOT
Check out my other videos for detailed break in - the Savage X video I did is super detailed
I’ll check it out thanks 🤟🏻🤟🏻🤟🏻
How much would this sell for in used condition?
how are you liking the MP9? Im between that and the losi eight-T rtr, but i'm thinking kyosho is the way to go. Looks like slightly better quality out of the box.
Well unfortunately, Losi has discontinued all there nitro RTR range it seems…. So I couldn’t tell you the comparison. From what I have seen the losi truggy seems more durable than the MP9 RTR. The MP9 RTR has metals on it that are to soft, bend incredibly easily
i wonder if thin alu foil also works as protection for body melting?
It does but how are you going to stick it….
Did you make between the tanks 1-3 some pause for cooling down the engine? Or did you even pull without stopping the engine nitro inside?
Break between tanks for cooling
Im very very new to Nitro im thinking of switching for lipo to nitro but i have no clue.why use the heat gun ? is it ness.how many tanks do you run through it before you take it out?thank you
heat up the engine for easier start, in the video hes wearing long sleeve shirt so im assuming it wasnt in summer
I just got mine two days ago and when it is at idle the wheels accelerate like crazy and goes to full throttle when I have it on the block but doesn’t move forwards while on the ground when I turn the idle screw down at all it revs really low and stalls out and shuts off. Am I supposed to use the throttle trim on the controller to make these tiny adjustments and I have trouble starting my engine does heating it up before start help a lot? It takes me many many pulls to start it but it’s 60 degrees Fahrenheit outside. I’m new to nitro so anything helps 😂 thanks
Furious Hawk check out my previous engine break in videos on my channel - I go in to more depth in those videos.... 🤝🔥⛽️🚀💥
I tough the ready set had already break in by the kyosho engineers, my inferno neo 3 comes with a certificate that it has already being broken in and the control been set up is my first nitro only had run brushless so i need some advice i have not run it yet i wanted the mp9 but i tough the neo was good to start with as i do not know much about nitro any advice welcome thanks
This particular one was not broken in from factory. I would advise you look at videos on UA-cam on how to tune and maintain the vehicle
Do you put some oil on the air filter? If yes what oil do you use? Thx
Tiago Martins yes, I used Dynamite air filter oil in this case 👍
How did you tune the engine after brake in? I have a neo 3.0 with ke21sp engine
Plenty of tuning vids on UA-cam
hi friend i have a question im not sure if i buy the kyosho u have or the hobao hyper Vs , which u prefer in that 2?
I'd go mp9
Just bought the VS and not too impressed with the build quality selling now and buying an mp9. Spend a bit more to get that much better quality
@@JamesO1229 thanks friend i will buy that one mp9
do i need to buy anything with it apart from batteries?
sam_ scoot AA Batteries for TX & RX
While playing the engine, do not exceed a few degrees Celsius
Did you use the break in ring that it came with when you broke it in?
No
@@inngotrcexperience6716 Why not? I just got mine and have never even heard of a break in ring before. Manual says to use it, so just figured I ask if there was a reason you didnt? Thanks! :)
@@dieseldoesthings527 I have never used one and have never had any issues. Just do the 6 tank break in procedure and you’re good to go in my opinion
hi friend can be used in circuit offroad?
Yes it’s designed for off-road use
@@inngotrcexperience6716 oh nice, which u prefer kyosho or Hobao hyper Vs?
@@inngotrcexperience6716 is it turbo plug?
@@carloscolmenares2594 go mp9!
top speed?
Approximately 35-40mph stock
Any help please
I’m currently breaking my sons inferno 3.0 geo in and I’ve had to stop the engine on its first tank only got down to half a tank I know the engine is supposed to run idle on first few tanks on just idle the temp has reached 244f so I decided to cut the engine out as I know temp is only supposed to be around 180 to 220f what do I do to stop the temp from going too high or is the normal it’s brand new
Thanks guys
adewashere Turn low speed needle counter clockwise 5-10 minutes 🤝
Me: asks for peanut butter and bread.
You: sure but why?
Me: because Im Jelly now.
Hi
daily riden horses 🤝
Il rodaggio a 100 gradi ma.... Il sottovaso come piano d appoggio