When the ost of infinite azure plays in the background, I think that this guys is a tekken player....then plays the emotionless passion on howard estate with geese. This guys know his shit, really love your mod video. I'm planning on buying this stick because I don't want to carry my Hori Rap N at when I'm going to a friends house and to modify it.
i should mention in case anyone sees this in ages looking for "did anyone actually do this" i did! but i went with a seimitsu ls62. was a really easy install, just make sure to look up the wiring as it's different from sanwa as i recall. works like a dream. it was actually extremely easy, even if you're not terribly experienced at soldering u should be able to do it.
Hey man awesome video. In order to add 6lb tension spring on the 8bitdo would I need to buy more actuators or just replace the spring the comes in the sanwa stick? Thanks
Hello again, so I've recently bought this stick, did you use some sort of grease when you changed the lever to a sanwa? Or did you just installed it as is?
@@24bison I have the 8bitdo Xbox arcade stick and one thing I noticed in fighting game training modes when it shows my inputs it's difficult to just input a diagonal without also registering one of the four main directions, this doesn't always matter for the game though because it seems like it has some kind of logic to determine what the intended inputs actually are maybe based on how long it's pressed or something. I'm not sure if it would be different with a different lever
There's something I want to know. Is it possible to replace the P1 and P2 buttons with 30mm sanwa snap in buttons with them being level with the other buttons or are the holes too small? I've those programmed to act as I clicked the left and right sticks on a traditional controller like the Switch Pro Controller for emulation purposes, which is why I asked.
@@Ness_and_Sonic Oh no, they're too small. They are 24mm buttons, and yes you can configure them, I used them as L3 and R3 but currently use them as select and start.
Really nice look, do the foam silencers affect the responsiveness of the buttons? I saw some people saying that sometimes the button presses do not register.
Yes, they feel a bit less responsive, almost like tapping a flat surface, but I got used to them pretty easily. About the buttons not registering, I haven't had that issue but I think it depends on the way you press. :)
Salutations!! What is that bat top called? Jamba??Were to did you purchase it? I would really appreciate for the info Thank you Your video was very informative.
@@24bison sorry to bother you with so many questions... But I would to know were did you buy the qanba bat top at?? Please let me know. Thank you and sorry to keep bugging you
It's alright! I bought it at Shopee because I'm from the Philippines, the shop is called 3dsoj. However I don't know where else to buy it in other regions though. :)
@@tetsuuya1451 Yes I still use this stick! Unfortunately the stick business is pretty expensive but I've had the Hori Mini (can't recommend too small) and the PXN-0082 which is cheap as hell but also cheap to use🤣 I really recommend this 8bitdo tbh.
@@24bison thanks! Is the 8bitdo comfortable when placing it on your lap? And does it hurt your wrist when playing for hours seeing that it has little wrist space, can you do kbd and wave dashing consistently? Sorry for asking too many questions 😅
hi bro, when you were testing it in the video with kazuya, did u connect it wired or wirelessly?. i would really like to know how was the wireless experience with that stick, thanks 🙏
The entire gameplay segment was wireless. I always use this thing wireless and I swear I don't feel any differences. This absolutely works beautifully even wireless so you don't gotta worry about that.
When the ost of infinite azure plays in the background, I think that this guys is a tekken player....then plays the emotionless passion on howard estate with geese. This guys know his shit, really love your mod video. I'm planning on buying this stick because I don't want to carry my Hori Rap N at when I'm going to a friends house and to modify it.
Thanks! This stick is actually really good considering the price, goodluck with your modding! :)
@@24bison can you send the link to the howard estate mod ?
him: so i got a circle gate, a tension spring, and a bat top...
me: i bet this guys a tekken player
him: *plays tekken*
good day sir... I had the same problem as you (only registering up+right)... glad I found your video :)
many thanks!
It's great to know I helped someone, you're welcome!
Tekken 8 hype!
Still using the same controller too!!
thanks for this vid, looking at doing this same thing myself
i should mention in case anyone sees this in ages looking for "did anyone actually do this" i did! but i went with a seimitsu ls62. was a really easy install, just make sure to look up the wiring as it's different from sanwa as i recall. works like a dream. it was actually extremely easy, even if you're not terribly experienced at soldering u should be able to do it.
Amazing too good
Nice vids sir, pwede ko ba mahingi ung link sanwa stick? Planning to upgrade din, hirap kasi controllin nung stock. Salamat. more vids.
Up! need the links of where to buy this upgrades.
New sub here I’ll be doing this mod soon thanks for the great video
Thanks, and I'm glad you enjoyed it!
i know this is 2 years later but do you think you could link the parts you bought?
ph.shp.ee/3qwhJPw
Here's a link to the Shopee store, you'll see the parts there
@@24bison thank you
Can a crown 309mj fit in that stick? I'm Planning to buy one so that I can give my friend my old, DIY stick
Unfortunately no, I wanted a crown lever too but it doesn't fit because the casing is too short
hi where did you buy sanwa parts?
Hey man awesome video. In order to add 6lb tension spring on the 8bitdo would I need to buy more actuators or just replace the spring the comes in the sanwa stick? Thanks
I believe you just have to replace it :)
Hello again, so I've recently bought this stick, did you use some sort of grease when you changed the lever to a sanwa? Or did you just installed it as is?
@@tetsuuya1451 Hey, I'm pretty sure it already has some grease in it, just install it as it is
@@24bison alright, thanks again for replying even if the video is old, you deserve a sub man 👌
@@tetsuuya1451 No prob, thanks for subbing! Will upload soon when college gives me a break🤣
@@24bison Goodluck for the both of us as we're both in college, I hope that you graduate with no problem at all 🙏
What spring tension did you use? 3lbs? Also, where did you bought the 5 pin connector? Shopee din?
Currently just use stock, and yes all from shopee
What's the biggest difference you notice in the levers?
Responsiveness and feel. I didn't really do any tests on it so I'm not the best at saying this but it does feel better.
@@24bison I have the 8bitdo Xbox arcade stick and one thing I noticed in fighting game training modes when it shows my inputs it's difficult to just input a diagonal without also registering one of the four main directions, this doesn't always matter for the game though because it seems like it has some kind of logic to determine what the intended inputs actually are maybe based on how long it's pressed or something. I'm not sure if it would be different with a different lever
Great vid. I would legit but this modded stick for £200
Got a deal for $65 user with sanwa stick and 4 buttons upgraded to sanwa is it worth?
@@smokegames1179 defo worth it. I'd snap that up
@@jdizzle1779 fckk broke til next week then haha
Ever tried out the hayabusa parts?
Not yet still😂
@@24bison I've tried out the hayabusa parts and they suck. They are very oversensitive.
There's something I want to know. Is it possible to replace the P1 and P2 buttons with 30mm sanwa snap in buttons with them being level with the other buttons or are the holes too small? I've those programmed to act as I clicked the left and right sticks on a traditional controller like the Switch Pro Controller for emulation purposes, which is why I asked.
@@Ness_and_Sonic Oh no, they're too small. They are 24mm buttons, and yes you can configure them, I used them as L3 and R3 but currently use them as select and start.
@@24bison I was hoping I could have them raised, but I guess that's not an option. Thanks for the heads up before I buy any buttons.
Really nice look, do the foam silencers affect the responsiveness of the buttons? I saw some people saying that sometimes the button presses do not register.
Yes, they feel a bit less responsive, almost like tapping a flat surface, but I got used to them pretty easily. About the buttons not registering, I haven't had that issue but I think it depends on the way you press. :)
is there a big difference between the original lever and sanwa ? wave dashing or electrics does it make a difference
Yes it makes a good difference
Hello. Is it possible to assign the "select", "start" buttons to P1 and P2? Or any other?
Yes, that's actually what I do. I use P1 and P2 for select and start. Just feels better
@@24bison thank bro❤
can you change all wire?
@@solxyt8115 Uhhh maybe? I'm not sure. Technically if you REALLY know what you're doing, but don't take my word for it.
Salutations!!
What is that bat top called? Jamba??Were to did you purchase it?
I would really appreciate for the info
Thank you
Your video was very informative.
Hello! Glad you enjoyed the video, that is a Qanba Bat Top. :)
@@24bison thanks !
Will they connect with any sanwas jlf joystick? Were did you purchase the bat top .i want one in red and blue.
Thank you so much!!
Yep, they will connect to a Sanwa JLF. :)
@@24bison sorry to bother you with so many questions...
But I would to know were did you buy the qanba bat top at??
Please let me know.
Thank you and sorry to keep bugging you
It's alright! I bought it at Shopee because I'm from the Philippines, the shop is called 3dsoj. However I don't know where else to buy it in other regions though. :)
You still use this? Do you recommend an entry level stick that doesnt hurt the wallet?
@@tetsuuya1451 Yes I still use this stick! Unfortunately the stick business is pretty expensive but I've had the Hori Mini (can't recommend too small) and the PXN-0082 which is cheap as hell but also cheap to use🤣 I really recommend this 8bitdo tbh.
@@24bison thanks! Is the 8bitdo comfortable when placing it on your lap? And does it hurt your wrist when playing for hours seeing that it has little wrist space, can you do kbd and wave dashing consistently? Sorry for asking too many questions 😅
hi bro, when you were testing it in the video with kazuya, did u connect it wired or wirelessly?.
i would really like to know how was the wireless experience with that stick, thanks 🙏
The entire gameplay segment was wireless. I always use this thing wireless and I swear I don't feel any differences. This absolutely works beautifully even wireless so you don't gotta worry about that.
The newer version does not require soldering anymore?
I'm not sure what you mean by versions but yes, this specific one does not require soldering.
hey mate what was the batttop options you mentioned ?
The Qanba bat top, and just some random local one
Audio is aweful ...
I'd rather have the aircon on than get microwaved in my room
bro baka may links ka kung saan ka bumili