Magazine Disassembly Tool for Glocks
Вставка
- Опубліковано 24 кві 2014
- Have you ever had a tough time taking apart your magazines? Sometimes they just get dirty and you want to clean them out, but getting the Mag Plate off can be really tough. Especially the first time!
Lenny Magill shows you a new tool to make the job easy and give you some tips on magazine maintenance.
This is our Item #T1144 - www.glockstore.com/magazine-di... - Навчання та стиль
I had to use a pair of pliers to get mine apart. Scratched up the mag which isn't a big deal. What is a big deal is using metal pliers can damage or break the magazine. Think I'll get one of these and one of the MDTs. Lenny you rock love the videos and tour a great teacher. Wish you had a store local to me in ohio I'd be in there a lot buying parts. Keep otnup
Lenny, you're one of the best instructors I've ever watched. I know the stuff of these videos isn't exactly rocket science but you keep it interesting and informative. Thank you sir.
whiskey papa he has a Radio voice
Lenny is a GOOD AMERICAN ! 🇺🇸
I think he talks for 5 minutes for every 30 seconds of useful information.
Use a C-clamp to push the base of the mags( mild pressure) in while you stick a punch in the base plate. Works like a charm
Just used it today. Very pleased. Excellent product!
Neat, useful tool explained with great patience.
Good video, nice instruction, I'm buying one. A helpful hint, you should always visually and physically inspect the chamber so there's no need for hammer/striker down procedure.
I placed Pearce grips on my G26, no problems until the 3rd mag! My 1st time......
I just installed a mag extension on a glock 43 and used a small pair of pliers opens wide.it fit perfect the only problem I had was the hole in the end didn't match on the bottom so I have to rely on the side clamps
* beats most Floor Plate removal tools...Forcefully pushing or pulling the floor plate from the magazine body eventually wears the tabs on the magazine body. Compressing the 'magazine body tabs' in order to disengage the floor plate for removal is a superior method of disassembly. Note: push the magazine's "insert" upward toward the top of the magazine *before compressing the magazine body at the tabs. ***SEE page 8 of the "Glock Preventive Maintenance" pamphlet downloadable from Glock.
Awesome investment, takes seconds now what use to take a lot longer. I bought for my glock 9mm & 45
Hah! He says, “Glock 17. Brand new. From our retail store downstairs....Point the gun in a safe direction.” [Points gun at floor] “Pull the trigger.”
I'm getting one!
Next time I'm in San Diego im going to visit your store
If you're having trouble, you gotta be careful, but grab a "c-clamp" and use it to slowly and just barely squeeze the sides of the mag inward to depress them out of the way of the cutouts/ears on the baseplate. Again, be careful.
Then grab your punch to press down on the floor plate stud and then slide the baseplate backwards. Presto
Thanks
Will there be one made for the Glock 43???
Some people cant change a flat tire! lol Cool tool
I could use this tool
Do the G31/32 magazines have extra thick walls? I can't take mine apart! The walls are so stiff that no matter how hard I squeeze, the damn floor plate absolutely refuses to budge even a tiny bit. This is really aggravating because I need to replace the spring. Why does Glock make it so difficult to take these apart?
I caught hell getting them off..a lil scratches to the mag but I dont mind that..
Glock guys the tool should be included w/ the extension for an added cost.
Just use a pair of channel locks and a small screwdriver and it will work perfect
Coming off was easy. Putting a new one on is what's tough. I even slightly oiled the sides and still haven't gotten it on. #irritated
Lenny ! you pointed the gun at floor while pulling the trigger after telling us you were up stairs ?
+Will M
First thing i noticed too LMAO I know he was 100%sure it was unloaded.
The store is downstairs so i will just point this in the safe direction LOL
Why cant they be easy like the magpul pmags m3
or you can save 20$ and wait time by using your vice to gently squeeze it and then pull the plate off..
is this the GTUL?
YES
thelastpatriot Holy Moly!!! 5 years!!! 😂
PRICE ???
Peccato che è tutto in inglese.
You sound a little like Mike rowe
I still think it's hilarious that Glocks need a tool to take the mags apart. Why do they need tabs when no other manufacturer needs them?
So you need a 'special' tool to hold you glock mag while you push the button in and it take you 11 minutes to explain that? LMAO, glocks. Funny as hell.
He just shot the poor guys down stairs 😧
All you really need is a C clamp
Video makes this look easy using the tool, but it's a false promise. I have the tool, and it's still darn near impossible.
What a nightmare. Just swapped the base plates off 3, 9 round 27mags. I used a tshirt to throw on top of the mag because it was to small to get a grip of. Shoved my disassembly tool into the floor plate, and pumped it like a water well. I tried to do that method in the vid but it wouldn't work. Bent the shit out of my disassembly tool so I straightened it and just kept yanking down and they popped right off. 2 solid yanks of the tool (lol) and you should be good to go. All the way in, yank down twice while applying pressure, should be golden. There also appears to be no damage done surprisingly. Aside from my intense monkey like rage episode trying to get the plate off and my crooked disassembly tool that is. Goodluck.
BS I'm six feet two hundred and fifteen lbs and the magazine plates are a pain in the ass. I ruined my plate trying to get it off. I've used vice grips and channel locks to squeeze it. I push the pin in and still the face plate won't slide. How the hell are people with hand problems or seniors like myself going to the plate off.
A waste of money. So easy to disassemble a Glock magazine with a pair of channel locks and a plunge.
Lenny you talk too much.
Nice tool. This video is ridiculous though. 5 minutes before you touched the tool. About two minutes of useful info. Everything else was useless babbling.
Just cut the stupid locking tabs once you have it dissembled. They serve no purpose.