Looks good.. but what happens when your off road and turn the truck on bumpy terrain?. Does the tire rub then? I would think that the distance inside the wheel well must be affected.
Thanks Dan! I want to do a set of FUEL 22x12 wheels with 35 x12.5R22's. The wheel has a -44 offset so it will stick out giving more clearance but my 2015 RAM already sits kinda higher. I was thinking a 2" front leveling kit for reassurance and my buddy breaks my balls about the rake. I actually like the hotrod look with the front sitting a little lower than the rear.
Hey, how does the truck drive with the 10 wides and tires? i had 20x12's on my 3rd gen cummins and hated the way it made the truck drive. it made it always wander and bump steer. either way im looking into a similar set up for my 2012 1500
I have 20 inch Rhino rims on my 2003 ram 1500 4x4 what’s the biggest tire I can put on my wheels without lifting my truck or rubbing? Please help me...
Hey boss how you doing I’m sorry for bothering you I wanted to know I’m getting a 2018 ram hemi nothing special I’m just wondering with my 35x12.50x17 Toyo tires fit with out a leveling kit
Hey bud quick question, so I have the 2017 ram sport night edition, I've found the wheels I like they are the ballistic rage but the smallest offset the have is like -19, for the tires I want to run 34sx11.5-12 depending on what fits, but I dont really want my tires like sticking way the hell out of the wheel well you mention you had a -24 on your you think with what I want to run it will stick out alot ?
I have a 2020 Ram Warlock. Will be installing a leveling kit. Which in total should give it more then enough clearance from what I have read on forums. Leveling kit is coming soon. And 35x12.5r20 will be going on stockers for now.
Why so set on 35s ? I'm running a 275/65/20 tire( Toyo Open Country ATII Extreme) and it fills the wheel wells nicely and gives a bit of lift over stock as well. No rubbing issues.
@@danielbusby6294 thats what we wanna know!!! Right there. I am building up a warlock for overland use. And I just needed the goods on whether I can offroad those tires. (2020 Ram Warlock)
Hello nice truck... Do you have a full view picture of the truck from the side? Would like to see the wheel gap on the truck and see how good the truck looks from afar....
@@--emt so my hemi was anything but sluggish it was 8speed 3.21 gears that thing turned 37s no complaints I ended up actually lifted 6 inches on super lift with no issues besides manifold cracks that where covered under warranty.........I ended up about 3 months ago getting 25k trade in on 21 Titan pro4x
@@jshapiro34 thanks for the Insight bud ...I have a 2017 big horn 5.7 Hemi with 3.92 gears 25000 miles on it I didn't want to overwork all my components , brakes suspension etc and make it really work hard to get going and stopping . for example my stock SRAs are 40 lb each I ended up going with the same size stock tires 275 60 20 but mud terrains at 58 lb each.( +18 per side ) I main concern was how much unsprung weight am I going to be moving and how much my truck is going to need to work obviously affecting ride quality I don't care about miles-per-gallon hit What do you think about my setup what are you recommend I have stock suspension didn't put any level on it just wanted a nice aggressive stock look
@@--emt I did have powerstop brakes and loved them but I also over tow I towed regular 7500-8200 lbs which was over weight for the ram I was originally on stock parts running nitto terra grapplers g2s 35x11.5x20 on 20x10 vision arcs and it still saw 16 mpg all day.
@@jshapiro34 I haven't put my tires on yet do you think I should be fine with the 3.92 and the 5.7 should be more than enough to move that around right? I don't tow.
A leveling kit is NOT stock! It’s a suspension modification. It’s still a lift! Put is in a sharp dicline off road rough terrain while in full turn... in other words, use the full travel.. not just a bump. They will rub. .. even if less than full travel clears body & frame? It won’t take much to rub front plastic wheel wells. If you want 33x12.5 - 13.5, or more? You’d do well to get a quality suspension lift.
He said the levelling kit will be in, in a week. Currently stock ride height. I've done 35's on a stock Ram myself. Sure it will probably hit on heavy off-road but daily driven its no problem.
Anybody know what a good clean setup would be For a 2015 ram 1500 2wd? With negative offset ,no rub?(with stock suspension) Ive been doing my research but man,its tough finding a good answer.
@@danielbusby6294 mine fell off with radial tires on while off roading few months ago. Bought 33 inch mud claw extreme tires and took them to mechanic he threw em on my truck while doing so he said you know the drive's side front fender liner is missing I said to him yeah I know it fell out didn't tell him why 😆
pingpang won I’m running 35/12.5r20 -44 on my 2015 Ram 1500 with a 3” leveling kit I can provide more information if you’re interested I’m gonna post a video in the next days
I'm doing the same, does anyone know with the negative 24 offset, if you need spacers? And with a 2-3" leveling kit, will that put maximum pressure on the ball joints, causing them to break?
Daniel Busby good to know. I switched my 33" toyo R20 tires onto a fuel rim with a negative 20 offset and added a leveling kit to the front. I'm satisfied with the look and won't bother with the 35" tires.
Hey man nice truck. Good luck with the spacer kit. I installed a 3" in front and a 2" in rear spacer kit and it vibrated my truck so bad. With the 35" tires. I had the tires balanced over and over till I said fuck it. Got a 6" lift kit and new wheels lol. Hope you don't have my luck. Like to see it after your done and hear your thoughts.
WOW .. THANK YOU for posting this! 35 x ? 12.5? were your trucks 2x4 or 4x4. I've heard it makes a difference.... No level right? No Cutting? Never rubs? hard brakes? speed bumps? reversing? Do you think the more negative offset -24 is the reason why? I was here to confirm 33x12.5 on the same rim but 2x4 2012 would not rub .. Offsets told me I would likely need to cut or mold my well liners.
oh wait... you removed the fender well skirt liners? you put them back on? anybody know implication of leaving them off? Anybody running without them? I'm thinking of this setup but 33x12.5 and use a heatgun and softball to re-mold and pull the fender well shirt liners where it rubs.
My ram has that same ticking noise. Do you know what causes that? Mines a 2012 I’ve had it since January 2017 and it made the noise ever since I bought it
It ticks due to a broken stud on the passenger exhaust manifold they say all hemis do it mine does it if you feel the studs on the passenger side exhaust manifold i garantee one is broken
I have a 2015 ecodiesel and want to keep the stock rims but go to 35s. Do you think it would work fine? I was planning on putting in a slight spacer. By the way I have the black forest green and love it. Looks amazing when it’s clean and waxed. Never stop getting compliments on it.
Anyone know if the emissions and safety inspection will fail you for the tires sticking out like that? In my state of MA they are getting so bad they are now making the techs wear body cams to video your inspection along with 3-5 video cams on the inspection bay. I’m not kidding. They are going after bad inspection places but also getting on people for tinted windows, exhaust, tire and wheel mods, lowered, raised....I feel if I fart I will fail my poor cars during the inspection. Wtf is happening these days?
Please.....This thing would rub hitting a crack in the road on a turn. Absolutely useless even on a dirt road, just spend the money on a decent lift brother!
No rubbing on level ground if the wheels are turned and you hit just the right bump I bet they rub too close for me might be ok if your truck is a pavement queen
I've done it too. No tire rub on normal daily use. Speed bumps, incline parking lots (at 25-35 mph), ditches, driveways...no problems.
Nice! Thanks for posting it.
Wish you would have backed up a bit tho, and got a full shot of the truck from a few angles.
Looks good.. but what happens when your off road and turn the truck on bumpy terrain?. Does the tire rub then? I would think that the distance inside the wheel well must be affected.
Thanks Dan! I want to do a set of FUEL 22x12 wheels with 35 x12.5R22's. The wheel has a -44 offset so it will stick out giving more clearance but my 2015 RAM already sits kinda higher. I was thinking a 2" front leveling kit for reassurance and my buddy breaks my balls about the rake. I actually like the hotrod look with the front sitting a little lower than the rear.
With that negative 24 offset how much do your tires stick out past the wheel well for your fender
Do you think you would have enough clearance for the tire if you had a -12 offset?
Hey, how does the truck drive with the 10 wides and tires? i had 20x12's on my 3rd gen cummins and hated the way it made the truck drive. it made it always wander and bump steer. either way im looking into a similar set up for my 2012 1500
What kinda rims do you have on. As in size
I am wanting to put 35s on mine (same year model) but i really want to leave the skirting on.
Do you know if this is the only wheel offset that would work? I was gonna get 18x9+1 but not sure it'd fit
So is there a leveling kit on there or is this stock
Did you put the skirts back on?
how’s it driving in the rain with no wheel wells? i run 35s on no lift and i took mine off to stop the rubbing
what psi do you use for regular non ofroad driving
I have 20 inch Rhino rims on my 2003 ram 1500 4x4 what’s the biggest tire I can put on my wheels without lifting my truck or rubbing? Please help me...
I got an 07 ram on 20 inch rims -24 offset with 1.5 inch spacers and 2 inch leveling kit and rubs with 33s with or without the spacers
I probably wouldn't recommend off road activities without having a lift. That's just my opinion. 👍
Hey boss how you doing I’m sorry for bothering you I wanted to know I’m getting a 2018 ram hemi nothing special I’m just wondering with my 35x12.50x17 Toyo tires fit with out a leveling kit
Was there a level on the truck in this video?
Please tell me the actual size?
Was it hitting that fender well at :40? Is that why you removed it?
Thanks for posting! I am curious, did you adjust your torsion bars to help "level" or lift the front end, if equipped?
Got 35s and mine does rub just on drivers side got 20x12 and got the skirt
Hey bud quick question, so I have the 2017 ram sport night edition, I've found the wheels I like they are the ballistic rage but the smallest offset the have is like -19, for the tires I want to run 34sx11.5-12 depending on what fits, but I dont really want my tires like sticking way the hell out of the wheel well you mention you had a -24 on your you think with what I want to run it will stick out alot ?
@@danielbusby6294 ok ty man
How bad did mud tires hurt your mpg?
Doesn't rub till you hit a damn bump.
Daniel Busby All good bro. Just looked kind of close. Looks awesome.
Couldn't you have the wheel wells shaved down a bit too if needed?
Tire and rim size please?
Automobiles have wheels bicycles have rims
adrian Gallardo 35s on 20x10 with a -24 offset
Hey bud did you have to recalibrate your speedometer with the bigger tire setup?
You have to if you want it to show the correct speed. Dealer can do it, or if you have a tuner like Diablosport you can do it yourself.
I have a 2017 ram 1500 want to do leveling kit. This will allow me to put bigger rim and tires correct?
I will answer your question yes put a 3 inch leveling kit and rear blocks 2 inch could fit 37s maybe lol
As soon as you drive and hit a bump it's going to rub give me speed bump going 10 miles an hour it's going to be like hitting the brakes LOL
First speed bump that u didn't see , probably take fenders off, 😆
What year is tour truck? I have some 35x12.50x17 nitto mud grapplers for my 2004 5.7L quad can I just put them on without a leveling kit?
Nvm I watched it again I heard you say 2017, but still I wonder if my 2004 is kinda the same
Thoughts on 35s rubbing on a ram warlock with the stock 1” lift?
I have a 2020 Ram Warlock. Will be installing a leveling kit. Which in total should give it more then enough clearance from what I have read on forums. Leveling kit is coming soon. And 35x12.5r20 will be going on stockers for now.
Why so set on 35s ? I'm running a 275/65/20 tire( Toyo Open Country ATII Extreme) and it fills the wheel wells nicely and gives a bit of lift over stock as well. No rubbing issues.
What about when you hit a bump or pothole? It would for sure rub then wouldn’t it?
@@danielbusby6294 thats what we wanna know!!! Right there. I am building up a warlock for overland use. And I just needed the goods on whether I can offroad those tires. (2020 Ram Warlock)
Cool cool 👍👍
Hello nice truck...
Do you have a full view picture of the truck from the side?
Would like to see the wheel gap on the truck and see how good the truck looks from afar....
Daniel Busby thanks for the reply. Here is my email when you get a chance to send those pics. I will private message you.thanks
I'm running rough county leveled 16 ram with 35x11.5x20s -25offset and only rub at full lock still able to tow ECT
Do you have the 5.7 Hemi ? how does your truck feel is it sluggish do you have a huge loss of power and breaking?
@@--emt so my hemi was anything but sluggish it was 8speed 3.21 gears that thing turned 37s no complaints I ended up actually lifted 6 inches on super lift with no issues besides manifold cracks that where covered under warranty.........I ended up about 3 months ago getting 25k trade in on 21 Titan pro4x
@@jshapiro34 thanks for the Insight bud ...I have a 2017 big horn 5.7 Hemi with 3.92 gears 25000 miles on it I didn't want to overwork all my components , brakes suspension etc and make it really work hard to get going and stopping .
for example my stock SRAs are 40 lb each I ended up going with the same size stock tires 275 60 20 but mud terrains at 58 lb each.( +18 per side )
I main concern was how much unsprung weight am I going to be moving and how much my truck is going to need to work obviously affecting ride quality I don't care about miles-per-gallon hit
What do you think about my setup what are you recommend I have stock suspension didn't put any level on it just wanted a nice aggressive stock look
@@--emt I did have powerstop brakes and loved them but I also over tow I towed regular 7500-8200 lbs which was over weight for the ram
I was originally on stock parts running nitto terra grapplers g2s 35x11.5x20 on 20x10 vision arcs and it still saw 16 mpg all day.
@@jshapiro34 I haven't put my tires on yet do you think I should be fine with the 3.92 and the 5.7 should be more than enough to move that around right? I don't tow.
A leveling kit is NOT stock! It’s a suspension modification. It’s still a lift! Put is in a sharp dicline off road rough terrain while in full turn... in other words, use the full travel.. not just a bump. They will rub. .. even if less than full travel clears body & frame? It won’t take much to rub front plastic wheel wells. If you want 33x12.5 - 13.5, or more? You’d do well to get a quality suspension lift.
He said the levelling kit will be in, in a week. Currently stock ride height. I've done 35's on a stock Ram myself. Sure it will probably hit on heavy off-road but daily driven its no problem.
Is that a 20 inch wheel
Anybody know what a good clean setup would be For a 2015 ram 1500 2wd? With negative offset ,no rub?(with stock suspension) Ive been doing my research but man,its tough finding a good answer.
3 inch supreme suspension level kit and 35 inch tires with 20 inch wheels
Is taking off that fender well skirt a must?
@@danielbusby6294 mine fell off with radial tires on while off roading few months ago. Bought 33 inch mud claw extreme tires and took them to mechanic he threw em on my truck while doing so he said you know the drive's side front fender liner is missing I said to him yeah I know it fell out didn't tell him why 😆
I'm about to put 37s on a 4 inch lift, hoping I don't get to much rubbing. I'm sure ill have to do some customizing..
thanks for the help..
Gonna try putting 37x13.5’s on my 2014 with the 2.5 inch daystar lift
You think a 35x12.5R20 with a -44mm offset will fit in stock?
pingpang won I’m running 35/12.5r20 -44 on my 2015 Ram 1500 with a 3” leveling kit I can provide more information if you’re interested
I’m gonna post a video in the next days
I'm doing the same, does anyone know with the negative 24 offset, if you need spacers? And with a 2-3" leveling kit, will that put maximum pressure on the ball joints, causing them to break?
Daniel Busby good to know. I switched my 33" toyo R20 tires onto a fuel rim with a negative 20 offset and added a leveling kit to the front. I'm satisfied with the look and won't bother with the 35" tires.
@@bradflemming6472 you 2x4? was that rubbing before you leveled? where?
What rims and tires do you have on there?
Where did you buy the package deal?
Hey man nice truck. Good luck with the spacer kit. I installed a 3" in front and a 2" in rear spacer kit and it vibrated my truck so bad. With the 35" tires. I had the tires balanced over and over till I said fuck it. Got a 6" lift kit and new wheels lol. Hope you don't have my luck. Like to see it after your done and hear your thoughts.
Daniel Busby that’s great man. Looks good.
Maybe your spacers aren't hub centric...
Geometry is off
WOW .. THANK YOU for posting this! 35 x ? 12.5? were your trucks 2x4 or 4x4. I've heard it makes a difference.... No level right? No Cutting? Never rubs? hard brakes? speed bumps? reversing? Do you think the more negative offset -24 is the reason why? I was here to confirm 33x12.5 on the same rim but 2x4 2012 would not rub .. Offsets told me I would likely need to cut or mold my well liners.
oh wait... you removed the fender well skirt liners? you put them back on? anybody know implication of leaving them off? Anybody running without them? I'm thinking of this setup but 33x12.5 and use a heatgun and softball to re-mold and pull the fender well shirt liners where it rubs.
Wow does not rub.
Truck sittin still
Try and roll through a pasture and your fender liners will be torn apart when your truck is flexing. Trust me I seen it happen.
Pavment princes
LOL.. Better put those liners in cause there is a lot of exposed electrical connectors hidden by the liner. Asking for probs..
Can you give us the sane tire you have??
Kept it safe on mine and went with 33".
Does it rub at all with 33s?
I was thinking about using my Mickey Thompson 33's I had on my Grand Cherokee that someone crashed me the other day totaled my Jeep.
what are these tires called ?
Daniel Vasquez it could be Atturo's mud tire
Offset makes the difference
It’s gonna fuck up your fenders when you hit something on the road happened too my buddy with no level. Good luck
My ram has that same ticking noise. Do you know what causes that? Mines a 2012 I’ve had it since January 2017 and it made the noise ever since I bought it
Ya just running regular 87
Just the good old hemi tick
It ticks due to a broken stud on the passenger exhaust manifold they say all hemis do it mine does it if you feel the studs on the passenger side exhaust manifold i garantee one is broken
I put 35x12.50 20 tires on my stock 2014 dodge ram ram 1500 4x4 and no rubbing at all
Daniel Busby ya I guess it depends on the year I know chevys have smaller fender space
Then you hit a bump and tore off your front fenders
jeremy greiner nope I'm in dirt roads everyday with that oilfield lige and no issues what so ever
Jeff E do you have a leveling kit?
Alex Bajo no sir it's stock level
The only problem is that it doesn't look lifted get a 5 1inch suspension lift and now we are talking
Is that blackforest green paint
Daniel Busby okay it looks like black forest green which I like but it's really nice looks good
I have a 2015 ecodiesel and want to keep the stock rims but go to 35s. Do you think it would work fine? I was planning on putting in a slight spacer. By the way I have the black forest green and love it. Looks amazing when it’s clean and waxed. Never stop getting compliments on it.
If you hit a speed bump at 25 mph.. Your going to hit the fenders bro....
Do you have air supension on this truck?
Damn GM and their small wheel wells😔
@@danielbusby6294 No shit lol...I was just saying this because I own a GM truck.
Upper control arm?
Does it run the upc? Mine does and they are 35x12.5
Quiest hemi Ive ever heard.
too close for me bro, ima put a lift on it
Whats the over all size of the tire n rim
What kind of tires are they?
What about a 18/12 -44 on a 2005 Dodge ram 1500 with out a lift
Anyone know if the emissions and safety inspection will fail you for the tires sticking out like that? In my state of MA they are getting so bad they are now making the techs wear body cams to video your inspection along with 3-5 video cams on the inspection bay. I’m not kidding. They are going after bad inspection places but also getting on people for tinted windows, exhaust, tire and wheel mods, lowered, raised....I feel if I fart I will fail my poor cars during the inspection. Wtf is happening these days?
Liberals
What do you think of 37s on a lv
Yea I wanna do 37s on mine i got a lv
Daniel Busby yea I wanna do it to mine I got lv
No way your fitting 37s on just a leveling kit.
I put a 3" leveling kit on my 2012 ram 1500 crew cab installed it myself and mine drives perfect.
that has to be awful on speedbumps
It's a 4×4 It's already stock lifted .... a 4×2 you would have to lift it
Get some mud or snow in there and your fender is wrecked
Please.....This thing would rub hitting a crack in the road on a turn. Absolutely useless even on a dirt road, just spend the money on a decent lift brother!
Can't hear you talk
More tire, less rim dude
No rubbing on level ground if the wheels are turned and you hit just the right bump I bet they rub too close for me might be ok if your truck is a pavement queen
35inch tires no lift.....
Hhhmmmm loooozer
Absolutely pointless
So is your comment lol