What gears does your truck have I have a 2016 4x4 big Horn and it has 321 gears they told me my transmission would be hunting for gears 7-8 gear when doing over 70 on the highway
Would you say ur trucks overall height increased a lot with the level kit? I know the front end goes up but does the overall height (the back of the roof) go up a lot?
The ride is awesome I would get the matching bilsteins for the rear because the factory shocks feel saggy and don’t match the great ride and response of the Bils up front
Lol oh man I just did the install yesterday. She’s rubs a bit with -44 honestly. Thinking of trimming the plastic on the wheel well or maybe heating the plastic up and reshaping it
@@tinolopez3136when you say wheels you mean rims right? So 22 x 12 with - 19 rims will not rub and no trim correct? Thanks man for this knowledge I would just like a confirmation
Any poly spacers made for the 97-06 Jeep Wrangler TJ fits under the rear shocks of these trucks That’s what I did. Way more options and way cheaper ! They stopped making the .75 spacers for this truck
If you're going to go with a mat or Lighter color why not make it something vibrant or simply out of the b&w color pallet? Not everything needs to looks like an AR 15. It's boring.
Great looking truck. The rims and tires make it look like they should. New sub in the building
Great truck 👍👍
Sick set up!
Nice look
What are ur new wheel well height from center ground to center wheel well bottom.. 38..39..40??
sorry for my ignorane whats the offset just looks? its what goes outside the wheel right
What gears does your truck have I have a 2016 4x4 big Horn and it has 321 gears they told me my transmission would be hunting for gears 7-8 gear when doing over 70 on the highway
321 no problems
where did you purchase the leveling kit at
A question how much air does it take 35 or more
Would you say ur trucks overall height increased a lot with the level kit? I know the front end goes up but does the overall height (the back of the roof) go up a lot?
Yeah it all goes up
Where you get that leveling kit do you have the link
Hi bro were there any rubbing on full lock?
You think it’ll fit a 2.5 inch level??
How is the ride quality ?
How do you like them tires? Any vibration at highway speed and how loud are they?
Love the tires they get louder as they wear out some vibration when slowing down
@@tinolopez3136 your tires are not mounted correctly . Yellow Dot goes on the valve steam .
Do you have a link to the bilstein used. I have a 2021 Ram 1500 Classic and would like the same look.
Look up your year and bilstein 5100s
How much was that setup?
I went with 33x12.5 but I have 17s instead of 20s, 35s look too stuffed under there to me.
I agree. If it was like a 4-6” lift I’d go 35s
Awesome looking...On the Bilstein what did you set yours on?
2.8
Did you have to get new UCAs for the front?
No
Did u level the stock control arms on it at the 2.8 height?
Stock control arms are on. The aftermarket ones are junk
Where do u get the 3/4 inch spacer for the rear
Any tj jeep (97-06 wrangler) rear coil spacer will work on the 09-23 rams
How it’s riding? I’m putting 22x12 -44 offset on mine with bilstein 5100
-19 or -24 doesn’t rub at all but 35s with -44 will run bad
The ride is awesome I would get the matching bilsteins for the rear because the factory shocks feel saggy and don’t match the great ride and response of the Bils up front
Lol oh man I just did the install yesterday. She’s rubs a bit with -44 honestly. Thinking of trimming the plastic on the wheel well or maybe heating the plastic up and reshaping it
I’ll send you some pics on the truck if you like man
@@jdmtealeg do the 20x12 -44 with 35’s rub bad?
No rubbing at all? Not even at full lock and no trimming?
no rub no trimming AT ALL!
How much higher is the nose?
It’s about a inch higher up front at the 2.8 setting without the rear spacers installed
No rubbing at all ? You have spaces on correct ?
No rubbing no spacers, -19 mm offset wheels clear
@@tinolopez3136when you say wheels you mean rims right? So 22 x 12 with - 19 rims will not rub and no trim correct? Thanks man for this knowledge I would just like a confirmation
Where you getting your 3/4 spacers for the rear?
Any poly spacers made for the 97-06 Jeep Wrangler TJ fits under the rear shocks of these trucks
That’s what I did. Way more options and way cheaper ! They stopped making the .75 spacers for this truck
If you want to raise the rear 3/4”, check out Carli Suspension rear springs. CJC Off-road sells these, and the ride is amazing
What’s your MPG ?
14
It looks like your liner was cut on the driver side.. 0:40
It's tied back with a zip tie
Any rubbing ?
Absolutely zero rubbing
If you're going to go with a mat or Lighter color why not make it something vibrant or simply out of the b&w color pallet? Not everything needs to looks like an AR 15. It's boring.