I purchased one of these for travelling. I love it. My partner and I travel by motoribike where you are limited by how much baggage you can carry. Also for work if it’s a short trip I only want to take carry on so I can fit everything in the one bag. The size is perfect. It does pack much smaller than my resmed 10. The humidex connection is noisier than I would like but not prohibitive. I never touch the on/off button because the auto ON/OFF works reliably every time. Because it’s only used for travelling I’m not worried about the data downloads because it’s used maybe 15% of the time. My main gripe is the retention method of the head strap. It isn’t adjustable. When it gets loose you drop it in hot water which retentions it. But the retention isn’t that tight. I live in west Australia which is usually very dry so some level of humidification is important. With the GO if you are adding humidifiers you are about the same size as a normal cpap.
I use my Air Mini every night. It is my one and only APAP machine. I sleep both sides and back and don’t have any problems that you have. I use the same mask only the smaller size. I am sleeping better now than before I had the machine. My low setting is 8 and high is 20. Love it as I don’t have to keep filling a water tank everyday. I am disabled and 68 yrs old.
Got my airmini yesterday and I'm glad I didn't listen to you. A+ experience. So sick of filling and cleaning humidifiers. This is easier to maintain. And so little I set it right next to my pillow and have zero problems on my side or back. We will see how this holds up as my new everyday device
Thank you, thank you, thank you!! I've had this for a year. Gone on a few thrips with it. It keeps me up for hours because of the constant blowing!! Too much air pressure. I leave for another trip in a few days. So excited to try it now that you have shown me how to adjust the pressure. You are my current hero, my friend!!
I have had my AirMini for nearly a year now and love it. I travel over 40 weeks in the year and makes no sense to have 2 CPAPs. I have been able to get back to normal sleep. At first the nose pillows caused some irritation to the tip of my nose. I use to wake up 4 or 5 times in the middle of the night and have to go to the bathroom. With this I sleep through the night. And I use it at home as well. No complaints. My sleep scores were a bit higher, but now I have less than 5.0 events per night. Not sure why they don't want you to use this at home.
Precisely. It's pissed me off when I asked the they just said oh .. the small travel one doesn't have the moisture option. Well , I don't even use the dam moisture option so.... what the heck. ! Wasted money on the full size big one... and have to haul it around for travel because I am not going to be able to afford this smaller one. Exactly my point too .. like why do i even need to have 2!! I'm just watching these videos to see how it's working for everyone else. BLah. Every time I go through gate they need me to yank it out. SOOooo annoying. So I tried to slide without taking it out. noPE! Got stopped and made me take it out ! *SIGH*
I've have my R.A.S.10 for four years and it started making a loud noise w/ea breadth. After a cpl wks found out that the two rubber cups that the water chamber connects to were leaking. Now have to "tug" on them before inserting water chamber.
I just purchased the air mini after the ResMed recall. I’ll hold onto my Dream Station just in case Phillips honors their claim to fix the issue …. But in the meantime- except for the annoying headgear (the nasal pillows are like the ones I’m used to) I will use this one every night. I don’t like using the humidity on my other machine. No matter what setting- I feel like I’m breathing underwater. Taking my first trip with this in a week. It will be nice not to have to lug a clunky machine.
I have the Resmed AirMini and I really like it. The main reason I chose this machine over other travel CPAP machines is there is no need for water for the humidifier. It can be difficult to travel with distilled water and sometimes difficult to purchase water when you reach your destination. The HumidX provides the humidity I need to keep from drying out without the need for water. I understand wanting a better picture of your night than you can get with the AirMini, but I've been using CPAP so long, I no longer find a need to look at the detailed info. I found this video when looking for a way to change the pressure setting. Thank you for the info!
I got a bit icked out my the idea of recycling my breath for humidification. Is it weird or gross? Also I was advised distilled water isn't necessary, you just need to descale it when required. Alternatively you can use water that's been boiled a couple of times.
I love the AirMini which I use with an F20 full face headgear and the memory foam mask. With the auto start/stop feature I never touch the on/off button; I just put it on and breathe. Have had it about 14 months. I do travel a lot and this is great.
I’ve owned and used an Air Mini for a few years now. I love it. I use it with the F30 now. I use a Goal Zero AC100 battery when on overnight flights. It works great.
@@Jacobra60 Yes. They all appear to have different rules about approving “medical devices”. Personally, I think they are way too restrictive with regard to CPAP machines. They act as if they are life sustaining devices like an oxygen concentrator. Guys. If it fails…I’ll snore…big deal! There is no reason I should have to use a battery that has twice as many runtime hours as the flight. Also, my iPad charger draws the same amount of power as my AirMini power adapter and a typical laptop power adapter uses two to three times the power as the AirMini, yet the airlines won’t let us power our AirMinis off the aircraft power, while they have problem allowing the other power adapters. Those issues aside, I have had no problem getting approval, but I do need to call to get it. It is a bit of a pain, but not horrible. Also, mask mandates (or personal preferences) during COVID-19 conflict with the ability to use a CPAP machine. I chose to not use my machine when traveling recently, so I could wear the N95 mask for the entire trip and avoid the conflict between CPAP therapy and Covid protection.
I still haven’t received my new machine. It’s February 2022. 7 months later. It could take 12 months. Phillips blames it on state regulation. So that’s why it’s delayed. Other people have already received theirs.
I just bought one of these now it’s compatible with the F30 and F20 masks. I bought it with the connector kit for those masks. They even have a new HumidX F20 to go with those masks, but it’s not compatible with the F30 for some reason. I was fascinated by you showing the clinicians menu in the app. I must try that out. That isn’t in the manuals I got. Also it says that you can send data to your clinician, but I’m not seeing that yet. Time will tell. I hope so. Thanks for all your helpful videos.
As someone who is just getting started with CPAP, I did not want a gigantic machine sitting next to my bed full of water and making me look like I am in a hospital. Call it denial, but I was looking to have a discrete solution. What I love about the air mini, is that it does not have a display screen! Why do I want a big cheesy display screen when the one item that is always within reach is my cell phone. The air mini requires absolutely no interaction with the base unit at all. Which means, it can basically be out of sight! Mine is tucked away in an open section of my bed frame with just the tube and mask coming up, which I just keep under my pillow. When I lay down at night, you simply put the mask on, start breathing, and it kicks on itself. When I wake up, I remove the mask, and it shuts down itself. It is litterally a tube and mask coming up from the top of my bed. As for the humidifier, come on! I hated these when I was a kid and my mom made me have one in my room when my throat was soar. Who really needs a humidifier? All they do is add to the moisture, which leads to mold, etc. So, if you are a little embarrased about being on a CPAP machine and don't want to advertise to the world that you have a sleep disorder by having your night stand riddled with big machines, tanks of water, cords, and all the other BS you have to have. Consider this machine. You can litterally stick it anywhere. It works great, its is quite, and really in the age of phone apps, a large color display on your unit is kind of stupid!
Do you live in a humid environment? In dry areas you definitely notice the difference without the humidifier. My mouth and eyes are both extremely dry in the morning when I use my cpap.
Great review and especially about getting into the technician part of the app - invaluable! Thanks! I was able to recalibrate to the settings I need. Sleeping well again after the ResMed recall!
You asked us to tell you why we like the Airmini. For me it boils down to EPR. I have had many CPAPs and APAPs over the last 20 years, including the Respironics Remstar M series, Resmed S9 and S10, Fisher Paykel, etc. The Respironics M series was the first machine that I was able to be compliant with and not rip it off an hour after going to bed. But in my experience the A-flex and C-flex functions are no where near as good as the EPR on the Resmed machines. I fell in love with that feature on the S9, and when it came time for a new machine I found the algorithm to be even nicer on the S10. I do a lot of travel for work and the S10 just is not convenient to carry for work. So two years ago I tried the HDM Z2 auto. I found it to be a lot like the Respironics M series. I hated the pressure relief feature but could sot of live with it, kind of. Then I tried the Airmini. Breathing while using the Airmini feels just like I am using my beloved S10. On the plus side, can throw the Airmini in my backpack with a clean shirt and underwear and be ready for an overnight trip without having to pack luggage or a CPAP bag. Does the Airmini have shortcomings? Yep, but I will deal with those to get the same feel and comfort that I already get from my S10.
I just started CPAP therapy two days ago and I like it so far. It has returned me back to the land of normal sleep and normalized blood pressure. The only bad thing is that my F20 mask does not accomodate a HumidX filter so humidification is not an option for me unless I change mask types.
I love my resmed air mini. I have traveled all over with it, from Europe to backpacking to camping and boondocking. I dont think it smells bad with the humidix, though it is important to change it every 30 days. And I find the mask much more comfortable than my standard resmed 10. The down side to me is the battery that has to be purchased separately, and and the cost of said lithium battery ($200). I need the convenience of it as I am not always sleeping somewhere that is on the grid. You did make me laugh when you said you were a calm reasonable guy.........Have a good day.
I absolutely love my Airmini. The retailer tried to talk me out of it but I'm so glad l persisted. I was after a machine to sleep in my vehicle/plane/camping but it is so good l use it all the time. It runs off 240v mains (Australian), my vehicle 12v deep cell battery (mains and solar charged), I get 2 nights off my Airmini battery before it has to be recharged and l can solar charge it when off grid. So versatile. Also it doesn't need water. The humidifier in it works well. Hoorah! The machine is worth it just for this alone. The mask also stays in place better than with other masks and is the best I've used for comfort. I have no trouble sleeping on my back or side, as l just move the humidifier to a comfortable spot. I agree it is heavy and would be better without it but it's okay. It could also be quieter but again that's a small inconvenience for it's very light, compact size and no worries about water spillage. It is pricey but l didn't look at this. I wanted something that met my needs. Batteries etc come as an extra. I rave about how good this tiny machine is.
I’ve had the AirMini for almost two years. It travels great and has accompanied me to China, Russia and Norway. It is so quiet and comfortable, I use it every night. I’ve heard some complaints about the Bluetooth connectivity. If it ever becomes disconnected, just unplug and plug back in and it will reconnect immediately.
I am surprised and yet puzzled that many here love the Air Mini. I bought it about 3 years ago and used it once or twice. The main issue is the loud noise while using it. I am using the Resmed Airfit N20 mask. Each time I breathe through the mask, I can hear a loud noise. Did I miss something or do something wrongly that caused this? I have found many other comments online that also gave the same feedback. Some pointers for me on how to improve would be great.
The best use of that on button via the phone is in a travel situation, I want one of these for my pop up camper because I really just need something ready to go and I need to do my family and bears a favor and not scare them away at night. I would expect that I would have the hose run to my bed but the unit would be bundled up somewhere inconvenient to push it because there are no bedside tables in my camper just overhead nets and such
I use the P10 Airmini mask with HumidX Plus on my Air Sense 10 and magnetic adapter in dry Minnesota winter. No dry sinuses. Need to clean nasal piece only. I do clean the HumidX cartridge with soap every 2 or 3 days and helps with the smell and nasal issues. Quiet and provides nice white noise to sleep with. Bought Airmini and will try soon.
I have this same AirMini and the HumidX leaks air and is also TERRIBLY noisy with air leaks. Not to happy with it as I end up not using it because of air noise.
Hi. You said you don't know why you might start the machine from phone rather than button...if in a plane and backpack under seat in front of your feet would be WAAAY easier to hit start on cell phone...
Why would you have a AirMini in a backpack under the seat? It's going to having a tough time sucking in air in a backpack. Also....where are you plugging it in??
Why would you use any* button to start or stop when you can set the machine to autostart and autostop then just put the mask on and start breathing or just take the mask off....
Great video. One thing: You were making fun of the fact you can start the machine from the app when there is a start button on the unit itself. It's actually a good feature. Frequently people will be using this on a boat or RV and the unit itself may be sitting on a shelf that is uncomfortable to reach if you're falling asleep. A lot of people check their phones before sleeping so not a bad option to just tap the phone and nod off instead of having to reach a table or shelf.
I really like my airmini. While I'm ticked too that the connection has the stupid change, I did spend a small amount to get the adapter that works fine. Also, not only is that the difference but I cannot use the same power cord from my Airsense 11 to the airmini because that is also different... Well, to be more accurate, I can use the Airsense 11 on my mini but not the reverse. So, this means I need a different DC adapter for 12 volt also. What I do love is that bulky piece inline you hate. I love the humidity and camp at high elevation... Above 8,000 often and appreciate that humidity. I also sleep with the hose over my head always with both machines vs across my neck like most do. It works great to keep the hose over my head. Speaking of that, I also like the phone app because one of the camping setups I need to keep the machine overhead and can't see it. Anyway, love your video but kindly disagree. Love my airmini
Hi Jason! I want to buy the AirMini and I saw on the Internet that an adapter is available so I could use my AirFit N30i mask but that way, it's impossible to use the HumidX system. Any solution to suggest so I can use both my favorite mask and the HumidX? Thanks
I like my air mini. I use it for both home and travel. My original resmed had a water reservoir that I could never adjust for what I needed, so I found I was not wearing my mask. With air mini the Humidx has really been helpful for me. I don't smell anything. The air mini cost me $1000 so I am glad I can use it for home and travel. For travel really great as it doesn't add to my luggage weight. I don't have the fitting issues you did. Maybe the mask/tubing is made for female profiles? I really appreciate your video as I had no idea my travel air mini had an app. Even if it is useless, good to know
I just purchased this machine as I am one of the many affected by the Dream Station Go recall. I now realize that I cannot download compliance data that the FAA (jerks) requires. Since this is an old review, do you know of any program or method for extracting this data? Thanks
I had the dreamstation Go - then of course it was recalled. Tried travelling with my F & P and hated it - so I have bought this one. Maybe it's coincidence - but I had the best night's sleep I've had in a long time last night! I do wish I could wear my Amara view mask with it.
I own this machine and bought it for traveling Europe which it worked fantastic. Pro's is it super small very easy to set up and it did fit my mask already so I had no issues there. Con's my main was the noise due to the humidex connection. I did get used to it but if that was not there it would be perfect for me. But as you stated if you want the data which I don't care about you should not buy this machine. if anyone knows how to get rid of the humidex connection let me know. Good review honest and straight forward.
I had the same problem with the Humidex connection being super noisy. It bothered me to the point where it was almost unusable. My solution was to wrap a small piece of nylon washcloth around the connection - it's thin enough for air to easily pass through and not interrupt airflow, but it diffused and dampened the sound tremendously. It adds a little weight, but nothing I couldn't handle. I wish I could download the data from this machine, but it's not a dealbreaker - I find traveling so much easier with this machine than what I had before.
I resisted getting any cpap for s while. Got resmed mini. Your vid helped w app pressure settings, thanks. I dont care about data and the phillips ovehead nasal pillow mask i got fits the resmed hose but i hate all this stuff because it’s all wayyyy too much info. I dont have help or a sleep doctor and calling people sucks cuz everyone is busy
I have the AirMini, and I use it for travel and camping. I really like how small it is. I hate that I can’t get the data into Oscar/sleepyhead, which means I can’t really see that all is working well. My main problem is the noise that the HumidX makes. I’m using ear plugs, but it is still too loud. Why didn’t I get the GO? Two main problems: it didn’t have a humidifier at the time, and it is really dry here, and it can only be charged on AC, not DC, so no charging on 12V! I think a big oversight for a travel CPAP. I’d like to try to explain ResMed’s decisions as I see them. I could be totally wrong.I think it all comes from the HumidX. I think that for it to function well, the air you breathe out has to go through the HumidX. It can’t exit like in the P10 or other masks right by the mask. That is why the distance from the mask to the HumidX is so short - small volume in which to collect CO2. So, you should have been able to use any mask without humidifier, but to use the HumidX you’d need a special mask. One that doesn’t expel air before the air gets back to the HumidX and one that only allows a small volume of air between the mask and the HumidX. But why not allow regular hoses to connect, and have the HumidX+special P10 with regular hose? Unclear...maybe they didn't want to allow the HumidX to be used on the GO?
I was thinking of getting this machine because at the CPAP shop online I am pretty sure it says you can use it at home, too. I have the regular Air ResMed machine and I hate that you have no choice but to use that water part; no option to make it smaller for travel by just pulling that off and using it without the humidifier. Oh, and having to take a big gallon container of the distilled water with you on a trip or HOPE you can find distilled water in any stores now is really fun!!! I hate that clunky machine that makes me feel like a hospital patient or disabled or something. It is embarrassing. When will making smaller machines be the standard!?! I got the DreamStation Go before their recall last year, so I had to return that. I am still waiting for them to send me my new one. I fear they won't and then I fear I will have lost my money for it. I bought it myself with my HSA card because I already have the ResMed home station and figured insurance wouldn't cover it. I am super pissed! Have you (or anyone else watching this video) tried the Z1 or Z2 CPAP? Wondering what your thoughts are on that? Thanks!
Great review. I travel a lot and like to travel light too. Bought a Z1 machine from a sponsor site and used the lefty15 coupon and picked up this sweet little guy for under 500. Used it for 8 nights in Europe. No complaints. did the job, a few acceptable drawbacks. It worked for me though.. check it out.
Thanks for the review. That proprietary tubing really sucks that not compatible with other machine. And also lack of detailed wave report which I think even their APP should support viewing it without SD CARD. Hope Resmed will keep improving user experience.
Hey there I hope you see this and answer! I recently was diagnosed with severe sleep apnea(mostly hypopneas on my sleep study). I've started using the apap. Ive been using Sleepyhead to look at my data and get an idea of my ideal pressure. I like to use the ERP because I hate that feeling of not being able to breath out. I've heard you say that using ERP can cause problems(central apnea, heart problems, RERAs) but I've also heard you say that ERP can help prevent those same problems so I'm confused. If my ideal pressure is a 11 and my ERP is going down to an 8, how could that cause problems, if its just helping me expel carbon dioxide?
Great vid. I agree that the data sharing SUCKS. This is MY data. I should have access to it. HOWEVER, the mini is really the only option for those of us who want to do deep back country back packing and bring CPAP without weighing you pack down. At 66 every pound counts! WIth the Medistrom Battery, head gear and tubing you are at 34 Oz which is about as low as you can go. I will have to give up some aspects of my DreamStation 2 data and quiet to allow for true cordless portability. I bought the ZephAir Hose adapter ($19 for a 20 cent piece of plastic made by slaves in China) which will allow me to connect my regular hose and head gear to the Mini BUT, and this is a big BUT, I will be using this in the mountains where the air is dry so humidification is not optional. To humidification, you have you use their hose and head gear set up to use the HumidX Plus to improve humidity. Without that, I think you would desiccate your airway at altitude.
The Resmed Airmini machine itself is great and is quiet and of course is very small. But - the air noise coming thru the tube is horrendous. It's impossible for me to relax and fall asleep with that high volume noise from the tube. I've also experimented getting a universal connector which allows you to now use any CPAP mask and their bigger diameter tubing with the AirMini. But that loud tube air noise just won't go away. My pressure settings are very low at 4.6 so high air pressure can't be blamed. Unfortunately I'm now going to return my Airmini to get a refund and I'll stick to the good old Resmed 10 machine which is so quiet (machine and tube).
Having major buyer's remorse after shelling out $900 for this device. I'd heard complaints in reviews about "noise" - but thought it was more like consistent white noise, which I thought I could deal with. Nope - it comes from the area of the HumidX chamber. I took a free decibel app to my setup, and the AirMini hits close to 60 db with every single inhale. I understand giving up functionality for the small size, but this seems like a HUGE problem with a super easy fix, should ResMed care to redesign the venting.
Thanks for this review! WTF is it with that non-standard tube fitting? Wow... I won't buy it just for that reason. As for the other negatives you mentioned, I could have put up with those but not the proprietary tube fitting.
Should I use bi-flex on my dreamstation auto bi-pap? And if so 1,2 or 3? I remember you said you don’t like the relief on the cpap so I was seeing if you feel the same way about bi-flex, thank you very much for making all of your videos they’ve helped me so much.
I'd still go with the Dreamstation Go for travel. Same size and you can use it at home as well without sacrificing any features...plus not have to buy proprietary masks. Considering the Resmed has an external power supply, they're the same size.
I am using the Airmini 100% of the time now due to the recall, the air filter door is damaged and according to Resmed this is not a replaceable part? The device is not useable without the airfilter door cover. I may try to have the airfilter door cover 3d printed but this seems unreasonable on my part. Resmed customer service thus far has been no help.
I wish I watched your video before buying the machine that costs $910.00 without the accessories. As soon I found out that I have to buy all hoses, special connectors, and different masks, I wanted to return the machine. The company said that since I opened it and they would not take it and I had to talk to the manager to get a return approval and still will pay a 15% restocking fee. The manager ended up ordering the hose and the mask free for me. I just feel that it may not be that good since using different masks is really worrying me. I wish I did not buy it. Is there a market to sell it? I never use it. It is brand new.
Does anyone have trouble with loud air noise in the tubing and elbow? (Ive checked and its not leaking) I own two cpap machines. A system one philips with simplus f&p mask and a resmed mini with airfit f20 mask. The philips system is almost completely silent at the mask end. The resmed mini sounds like a jet engine rush. (without the whine) near your ear. I have to share rooms with workmates and the rushing noise from the narrow tubing and outlet on the mini is going to be an issue. Is there anything I can do? Or is the resmed mini a naturally noisy tubing and elbow/connector/exhaust system? (The machine itself is very quiet by the way)
Thank you so much for the tips on how to change the pressure! My regular APAP caused aerophagia which was very painful. I had it reset to CPAP and had to change the pressure on my mini to prevent it from happening with this one. I also couldn’t handle the noise from the hose so got the adapter from Amazon and use my regular N20 mask. Can’t use the moisture packs with it but found they didn’t do much anyway. Still better than dragging my large one (Airsense 10 for Her) around when travelling for work.
Hi I've just bought an Air-Mini and I know that the tube will anoy me Can you send me a link for the adapter of which you speak please? ie. from the air-moni to a standard tubing and mask Thanx
Are you trying to type "proprietary"? This isn't even in the same category in terms of a comparison. It's SO proprietary that ResMeds own masks don't work on it.
this is an excellent review of this machine - i started with this and wasted a lot of money on it - its not very good - i switched to the resmed air sense 10 - way better and comfortable - this mini is designed to make money for resmed - just dont buy it .the resmed air sense 10 is portable enough for travel - GREAT REVIEW
@@davidinmd712 I've been told distilled is not required. They just recommend that because most people don't clean their tanks. If you use twice boiled water it should be fine.
If anyone else has trouble entering clinical mode: if the AirMini is already paired with your phone, but the app asks you to pair again via bluetooth when in clinical mode, try unplugging the AirMini, waiting a bit, and then plugging it back in. When my AirMini powered up, it skipped the pairing step and the app went straight into settings.
Hi I've just bought an Air-Mini and I know that the tube will anoy me Can you send me a link for the adapter of which you speak please? ie. from the air-moni to a standard tubing and mask Thanx
Your sleep data is stored on the app so there's no need for an SD card. You also don't need distilled water to use it due to the filter on the mask and also why you can only use their hose
Hello I am a new to the CPAP world And i would like to know information as how i can help out my partner we are waiting on a home base staion kit for her, BUT i travel and camp or backpack a lot and i feel like being hooked up to a machine will improve her quality of sleep but at the price of NOT being able to do what i love doing being outdoors! Please people help me out and let me know if i should buy this mini cpap and what battery combo do i need? Also i have a 200w 10ah solar panel to charge my batteries if needed and what adapter converter would i need for DC -DC ? Any helpful information will be greatly appreciated 🙂 Thank you for taking the time to read my post.
I just purchased the Mini for a train trip we just got back from and so far I liked the unit. I like the App and I hate the mask. I know there are only two masks that are certified for this unit I prefer the other one, of course. I used it for a few nights at home prior to leaving and it worked great, except for the mask.
I just got this machine. I've used it for one week when traveling overseas. I like it. However.....(there's always a but...) I have now found out that I can't download any data to print out or even send to my dr. as I'm required in order to keep my pilot license and my job. This machine is great but that sucks. If anyone has any idea how to get that data let me know ASAP. Otherwise I'm going to send it back while im in the 30 day trial period.
Love my AirMini and was surprised by this guys negative review. He is not a calm miserable guy as he stated in the review but just the opposite. I use my AirMini for home and travel and prefer the unit to my full size unit provided thru Kaiser. Consider this a worthless and suspiciously negative review by a negative individual.
When my Dream Station got recalled, I purchased the AirMini. Of course, I got ripped off as the price was high after the recall. Wish I'd known about your website. What you say is true...the mask situation is abysmal. Just when I found a mask for the Dream Station that worked for me after 5 years of trial and error, the machine gets recalled! What I don't like about the mini which you didn't mention is that the air sound is loud compared to the Dream Station.
Thanks for this review. I was thinking about buying one of these and putting in the settings from my Aircurve 10s. However, the inability to pull the data is a dealbreaker. I MUST have the ability to pull my own data as a CDL driver. I use the OSCAR program on Windows 10 for pulling and printing out my data right before my DOT physical every year. Some doctors that do the physicals can/will do it themselves if I bring them the SD card. Other ones can't be bothered if doing that isn't part of their normal routine (they're different depending on what company I drive for)
I have a colonoscopy/upper gi I requested to use my CPAP during and after the procedure. I have read how safe it is even with apnea, still would like the machine, I am wondering how the doc will react, I was expecting a return email but it is president's day. So probably tomorrow. I am hoping it is a non issue, I am planning to use my pillow mask, an endoscop mask would be ideal but some of what I read makes it more of a chore for the doc, not my goal I also saw some remarks on the cost. I am thinking of a basic full face cpap mask with a port for the scope.
I have a brand new one, and the mask makes so much noise I really can’t use it. I don’t have a humidifier, the mask doesn’t leak, and the filter isn’t clogged. The noise isn’t from the machine, is air flowing through the mask, so the noise is right next to my face. I’ve bought the adaptor and used the mask from my home machine - I sound like Darth Vader with a head cold. It’s really horrible.
Watching this makes wonder how this stuff can be so poorly designed. I modified the frame of my Fisher & Paykel Simplus I installed a shield (made from a plastic soap bottle and duct tape) that keeps the discharge air from blowing into my eyes. Modified the mask is quite comfortable. I've have a nasal pillow, but don't care for it much, but there's nothing really wrong with it. I have been looking for another mask, because I'd rather not have to make the modification to the frame, but of the two others I've tried, I found one to be uncomfortable and the other to be ridiculous in terms of almost every aspect. It's hard to believe anyone might like it. The little machine you reviewed has some very obvious shortcomings. Why they would design a contraption with a bobber that bangs on your chin is beyond me. Can't the designers see something as obvious as that?
Hi Jason! I appreciate your informative videos. I was interested in becoming a registered polysomnographic tech and wanted your opinion about the prospective job field. I've searched online but nothing too current was available. I would appreciate your insight. Thanks
I think it’s really difficult to break into now. Labs are consolidating and reimbursements are dropping....about as low as they can be without folding. Go into it cautiously optimistic. ASTEP programs are your first step.
![Lp. Сердце Вселенной #1 НАЧАЛО ПУТЕШЕСТВИЯ [Новый сезон] • Майнкрафт](http://i.ytimg.com/vi/380Q7gLWGvk/mqdefault.jpg)
I purchased one of these for travelling. I love it. My partner and I travel by motoribike where you are limited by how much baggage you can carry. Also for work if it’s a short trip I only want to take carry on so I can fit everything in the one bag. The size is perfect. It does pack much smaller than my resmed 10. The humidex connection is noisier than I would like but not prohibitive. I never touch the on/off button because the auto ON/OFF works reliably every time. Because it’s only used for travelling I’m not worried about the data downloads because it’s used maybe 15% of the time. My main gripe is the retention method of the head strap. It isn’t adjustable. When it gets loose you drop it in hot water which retentions it. But the retention isn’t that tight. I live in west Australia which is usually very dry so some level of humidification is important. With the GO if you are adding humidifiers you are about the same size as a normal cpap.
I use my Air Mini every night. It is my one and only APAP machine. I sleep both sides and back and don’t have any problems that you have. I use the same mask only the smaller size. I am sleeping better now than before I had the machine. My low setting is 8 and high is 20. Love it as I don’t have to keep filling a water tank everyday. I am disabled and 68 yrs old.
Airmini works great for me too. I think this guy is just used to how his old style machine works.
Got my airmini yesterday and I'm glad I didn't listen to you. A+ experience. So sick of filling and cleaning humidifiers. This is easier to maintain. And so little I set it right next to my pillow and have zero problems on my side or back. We will see how this holds up as my new everyday device
How's it going with the airmini after several weeks. I'm new to CPAP and wants to see if the airmini will be a good alternative to the large machines
Thank you, thank you, thank you!! I've had this for a year. Gone on a few thrips with it. It keeps me up for hours because of the constant blowing!! Too much air pressure. I leave for another trip in a few days. So excited to try it now that you have shown me how to adjust the pressure. You are my current hero, my friend!!
I have had my AirMini for nearly a year now and love it. I travel over 40 weeks in the year and makes no sense to have 2 CPAPs. I have been able to get back to normal sleep. At first the nose pillows caused some irritation to the tip of my nose. I use to wake up 4 or 5 times in the middle of the night and have to go to the bathroom. With this I sleep through the night. And I use it at home as well. No complaints. My sleep scores were a bit higher, but now I have less than 5.0 events per night. Not sure why they don't want you to use this at home.
Precisely. It's pissed me off when I asked the they just said oh .. the small travel one doesn't have the moisture option. Well , I don't even use the dam moisture option so.... what the heck. ! Wasted money on the full size big one... and have to haul it around for travel because I am not going to be able to afford this smaller one. Exactly my point too .. like why do i even need to have 2!! I'm just watching these videos to see how it's working for everyone else. BLah. Every time I go through gate they need me to yank it out. SOOooo annoying. So I tried to slide without taking it out. noPE! Got stopped and made me take it out ! *SIGH*
I've have my R.A.S.10 for four years and it started making a loud noise w/ea breadth. After a cpl wks found out that the two rubber cups that the water chamber connects to were leaking. Now have to "tug" on them before inserting water chamber.
I just purchased the air mini after the ResMed recall. I’ll hold onto my Dream Station just in case Phillips honors their claim to fix the issue …. But in the meantime- except for the annoying headgear (the nasal pillows are like the ones I’m used to) I will use this one every night. I don’t like using the humidity on my other machine. No matter what setting- I feel like I’m breathing underwater. Taking my first trip with this in a week. It will be nice not to have to lug a clunky machine.
I have the Resmed AirMini and I really like it. The main reason I chose this machine over other travel CPAP machines is there is no need for water for the humidifier. It can be difficult to travel with distilled water and sometimes difficult to purchase water when you reach your destination. The HumidX provides the humidity I need to keep from drying out without the need for water. I understand wanting a better picture of your night than you can get with the AirMini, but I've been using CPAP so long, I no longer find a need to look at the detailed info. I found this video when looking for a way to change the pressure setting. Thank you for the info!
I got a bit icked out my the idea of recycling my breath for humidification. Is it weird or gross? Also I was advised distilled water isn't necessary, you just need to descale it when required. Alternatively you can use water that's been boiled a couple of times.
@@missbeaussie wow..didn't know that about boiling water ...thanks!!!
I love the AirMini which I use with an F20 full face headgear and the memory foam mask. With the auto start/stop feature I never touch the on/off button; I just put it on and breathe. Have had it about 14 months. I do travel a lot and this is great.
Obviously you don't find it "to noisy" ??
I literally received mine today! First machine. The auto start stop sounds great
111
I’ve owned and used an Air Mini for a few years now. I love it. I use it with the F30 now. I use a Goal Zero AC100 battery when on overnight flights. It works great.
Did you have to get permission before your flight to use the AirMini in the air?
@@Jacobra60 Yes. They all appear to have different rules about approving “medical devices”. Personally, I think they are way too restrictive with regard to CPAP machines. They act as if they are life sustaining devices like an oxygen concentrator. Guys. If it fails…I’ll snore…big deal! There is no reason I should have to use a battery that has twice as many runtime hours as the flight. Also, my iPad charger draws the same amount of power as my AirMini power adapter and a typical laptop power adapter uses two to three times the power as the AirMini, yet the airlines won’t let us power our AirMinis off the aircraft power, while they have problem allowing the other power adapters.
Those issues aside, I have had no problem getting approval, but I do need to call to get it. It is a bit of a pain, but not horrible. Also, mask mandates (or personal preferences) during COVID-19 conflict with the ability to use a CPAP machine. I chose to not use my machine when traveling recently, so I could wear the N95 mask for the entire trip and avoid the conflict between CPAP therapy and Covid protection.
Dream Station Go has a recall now in June 2021, so Im shopping for a new one.
So ridiculous. Cancerous gas! Don't think I can trust philips again.
What?
I am new at this what should i know?
Bump. Details?
I still haven’t received my new machine. It’s February 2022. 7 months later. It could take 12 months. Phillips blames it on state regulation. So that’s why it’s delayed. Other people have already received theirs.
I use the resmed mini and it's awesome.....portable and works extremely well.. Dreamstation go is awful..
I just bought one of these now it’s compatible with the F30 and F20 masks. I bought it with the connector kit for those masks. They even have a new HumidX F20 to go with those masks, but it’s not compatible with the F30 for some reason. I was fascinated by you showing the clinicians menu in the app. I must try that out. That isn’t in the manuals I got. Also it says that you can send data to your clinician, but I’m not seeing that yet. Time will tell. I hope so. Thanks for all your helpful videos.
As someone who is just getting started with CPAP, I did not want a gigantic machine sitting next to my bed full of water and making me look like I am in a hospital. Call it denial, but I was looking to have a discrete solution. What I love about the air mini, is that it does not have a display screen! Why do I want a big cheesy display screen when the one item that is always within reach is my cell phone. The air mini requires absolutely no interaction with the base unit at all. Which means, it can basically be out of sight! Mine is tucked away in an open section of my bed frame with just the tube and mask coming up, which I just keep under my pillow. When I lay down at night, you simply put the mask on, start breathing, and it kicks on itself. When I wake up, I remove the mask, and it shuts down itself. It is litterally a tube and mask coming up from the top of my bed. As for the humidifier, come on! I hated these when I was a kid and my mom made me have one in my room when my throat was soar. Who really needs a humidifier? All they do is add to the moisture, which leads to mold, etc. So, if you are a little embarrased about being on a CPAP machine and don't want to advertise to the world that you have a sleep disorder by having your night stand riddled with big machines, tanks of water, cords, and all the other BS you have to have. Consider this machine. You can litterally stick it anywhere. It works great, its is quite, and really in the age of phone apps, a large color display on your unit is kind of stupid!
Do you live in a humid environment? In dry areas you definitely notice the difference without the humidifier. My mouth and eyes are both extremely dry in the morning when I use my cpap.
Who really needs a humidifier? People who live in a high elevation desert like Colorado or Utah unless you want bloody scabs in your nose.
Great review and especially about getting into the technician part of the app - invaluable! Thanks! I was able to recalibrate to the settings I need. Sleeping well again after the ResMed recall!
+1 thanks for access to Clinician menu! It helps a lot.
You asked us to tell you why we like the Airmini. For me it boils down to EPR. I have had many CPAPs and APAPs over the last 20 years, including the Respironics Remstar M series, Resmed S9 and S10, Fisher Paykel, etc. The Respironics M series was the first machine that I was able to be compliant with and not rip it off an hour after going to bed. But in my experience the A-flex and C-flex functions are no where near as good as the EPR on the Resmed machines. I fell in love with that feature on the S9, and when it came time for a new machine I found the algorithm to be even nicer on the S10. I do a lot of travel for work and the S10 just is not convenient to carry for work. So two years ago I tried the HDM Z2 auto. I found it to be a lot like the Respironics M series. I hated the pressure relief feature but could sot of live with it, kind of. Then I tried the Airmini. Breathing while using the Airmini feels just like I am using my beloved S10. On the plus side, can throw the Airmini in my backpack with a clean shirt and underwear and be ready for an overnight trip without having to pack luggage or a CPAP bag. Does the Airmini have shortcomings? Yep, but I will deal with those to get the same feel and comfort that I already get from my S10.
I just started CPAP therapy two days ago and I like it so far. It has returned me back to the land of normal sleep and normalized blood pressure.
The only bad thing is that my F20 mask does not accomodate a HumidX filter so humidification is not an option for me unless I change mask types.
I love my resmed air mini. I have traveled all over with it, from Europe to backpacking to camping and boondocking. I dont think it smells bad with the humidix, though it is important to change it every 30 days. And I find the mask much more comfortable than my standard resmed 10. The down side to me is the battery that has to be purchased separately, and and the cost of said lithium battery ($200). I need the convenience of it as I am not always sleeping somewhere that is on the grid. You did make me laugh when you said you were a calm reasonable guy.........Have a good day.
I absolutely love my Airmini. The retailer tried to talk me out of it but I'm so glad l persisted. I was after a machine to sleep in my vehicle/plane/camping but it is so good l use it all the time.
It runs off 240v mains (Australian), my vehicle 12v deep cell battery (mains and solar charged), I get 2 nights off my Airmini battery before it has to be recharged and l can solar charge it when off grid. So versatile.
Also it doesn't need water. The humidifier in it works well. Hoorah! The machine is worth it just for this alone.
The mask also stays in place better than with other masks and is the best I've used for comfort. I have no trouble sleeping on my back or side, as l just move the humidifier to a comfortable spot. I agree it is heavy and would be better without it but it's okay.
It could also be quieter but again that's a small inconvenience for it's very light, compact size and no worries about water spillage.
It is pricey but l didn't look at this. I wanted something that met my needs. Batteries etc come as an extra.
I rave about how good this tiny machine is.
I’ve had the AirMini for almost two years. It travels great and has accompanied me to China, Russia and Norway. It is so quiet and comfortable, I use it every night. I’ve heard some complaints about the Bluetooth connectivity. If it ever becomes disconnected, just unplug and plug back in and it will reconnect immediately.
Or on the iPhone, go to Settings-->Bluetooth-->Connect to . Works when the automatic connection won't.
I am surprised and yet puzzled that many here love the Air Mini. I bought it about 3 years ago and used it once or twice. The main issue is the loud noise while using it. I am using the Resmed Airfit N20 mask. Each time I breathe through the mask, I can hear a loud noise. Did I miss something or do something wrongly that caused this? I have found many other comments online that also gave the same feedback. Some pointers for me on how to improve would be great.
Thanks for your, so-rare, honest review!
Hi. I live in Brazil and I'm looking for a travel CPAP system. I'm very gratefull for your video.
The best use of that on button via the phone is in a travel situation, I want one of these for my pop up camper because I really just need something ready to go and I need to do my family and bears a favor and not scare them away at night. I would expect that I would have the hose run to my bed but the unit would be bundled up somewhere inconvenient to push it because there are no bedside tables in my camper just overhead nets and such
9999999999⁹99999999999999999999⁹9999999999999999999999999999999999⁹999999999999999999999999999⁹99999999999999999999⁹9⁹9⁹99999999999999999999999⁹99999999999999999⁹9⁹99⁹⁹999999999999999999999⁹999999999999999999999999999999999⁹⁹99⁹99⁹99999⁹9999999⁹9990
Just go an Airmini. A little noisy at the humid x connection but I got used to it. Great machine with humidity for travel.
I use the P10 Airmini mask with HumidX Plus on my Air Sense 10 and magnetic adapter in dry Minnesota winter. No dry sinuses. Need to clean nasal piece only. I do clean the HumidX cartridge with soap every 2 or 3 days and helps with the smell and nasal issues.
Quiet and provides nice white noise to sleep with.
Bought Airmini and will try soon.
I have this same AirMini and the HumidX leaks air and is also TERRIBLY noisy with air leaks. Not to happy with it as I end up not using it because of air noise.
Lol, we are only 3 minutes into the video and complained about everything so far 😂😂😂👍 funny 😊
Hi. You said you don't know why you might start the machine from phone rather than button...if in a plane and backpack under seat in front of your feet would be WAAAY easier to hit start on cell phone...
Why would you have a AirMini in a backpack under the seat? It's going to having a tough time sucking in air in a backpack. Also....where are you plugging it in??
Why would you use any* button to start or stop when you can set the machine to autostart and autostop then just put the mask on and start breathing or just take the mask off....
Great video. One thing: You were making fun of the fact you can start the machine from the app when there is a start button on the unit itself. It's actually a good feature. Frequently people will be using this on a boat or RV and the unit itself may be sitting on a shelf that is uncomfortable to reach if you're falling asleep. A lot of people check their phones before sleeping so not a bad option to just tap the phone and nod off instead of having to reach a table or shelf.
For me the reason the airsense mini works is camping and backpacking.
I really like my airmini. While I'm ticked too that the connection has the stupid change, I did spend a small amount to get the adapter that works fine. Also, not only is that the difference but I cannot use the same power cord from my Airsense 11 to the airmini because that is also different... Well, to be more accurate, I can use the Airsense 11 on my mini but not the reverse. So, this means I need a different DC adapter for 12 volt also. What I do love is that bulky piece inline you hate. I love the humidity and camp at high elevation... Above 8,000 often and appreciate that humidity. I also sleep with the hose over my head always with both machines vs across my neck like most do. It works great to keep the hose over my head. Speaking of that, I also like the phone app because one of the camping setups I need to keep the machine overhead and can't see it. Anyway, love your video but kindly disagree. Love my airmini
Hi Jason! I want to buy the AirMini and I saw on the Internet that an adapter is available so I could use my AirFit N30i mask but that way, it's impossible to use the HumidX system. Any solution to suggest so I can use both my favorite mask and the HumidX? Thanks
Mr. McGee don’t make me angry you wouldn’t like when, I’m angry 😂😂😂
I like my air mini. I use it for both home and travel. My original resmed had a water reservoir that I could never adjust for what I needed, so I found I was not wearing my mask. With air mini the Humidx has really been helpful for me. I don't smell anything. The air mini cost me $1000 so I am glad I can use it for home and travel. For travel really great as it doesn't add to my luggage weight. I don't have the fitting issues you did. Maybe the mask/tubing is made for female profiles?
I really appreciate your video as I had no idea my travel air mini had an app. Even if it is useless, good to know
Using my air mini for the first time is it meant to make a loud swooshing sound through the nasal mask?
I just purchased this machine as I am one of the many affected by the Dream Station Go recall. I now realize that I cannot download compliance data that the FAA (jerks) requires. Since this is an old review, do you know of any program or method for extracting this data? Thanks
I had the dreamstation Go - then of course it was recalled. Tried travelling with my F & P and hated it - so I have bought this one. Maybe it's coincidence - but I had the best night's sleep I've had in a long time last night! I do wish I could wear my Amara view mask with it.
thank you, I could not use mine since it started at 4. I got it at 7.5 and that is the magic number
I own this machine and bought it for traveling Europe which it worked fantastic. Pro's is it super small very easy to set up and it did fit my mask already so I had no issues there. Con's my main was the noise due to the humidex connection. I did get used to it but if that was not there it would be perfect for me. But as you stated if you want the data which I don't care about you should not buy this machine. if anyone knows how to get rid of the humidex connection let me know. Good review honest and straight forward.
I had the same problem with the Humidex connection being super noisy. It bothered me to the point where it was almost unusable. My solution was to wrap a small piece of nylon washcloth around the connection - it's thin enough for air to easily pass through and not interrupt airflow, but it diffused and dampened the sound tremendously. It adds a little weight, but nothing I couldn't handle. I wish I could download the data from this machine, but it's not a dealbreaker - I find traveling so much easier with this machine than what I had before.
Just twist the connection hose. it comes right out.
I resisted getting any cpap for s while. Got resmed mini. Your vid helped w app pressure settings, thanks. I dont care about data and the phillips ovehead nasal pillow mask i got fits the resmed hose but i hate all this stuff because it’s all wayyyy too much info. I dont have help or a sleep doctor and calling people sucks cuz everyone is busy
I have the AirMini, and I use it for travel and camping. I really like how small it is. I hate that I can’t get the data into Oscar/sleepyhead, which means I can’t really see that all is working well. My main problem is the noise that the HumidX makes. I’m using ear plugs, but it is still too loud. Why didn’t I get the GO? Two main problems: it didn’t have a humidifier at the time, and it is really dry here, and it can only be charged on AC, not DC, so no charging on 12V! I think a big oversight for a travel CPAP. I’d like to try to explain ResMed’s decisions as I see them. I could be totally wrong.I think it all comes from the HumidX. I think that for it to function well, the air you breathe out has to go through the HumidX. It can’t exit like in the P10 or other masks right by the mask. That is why the distance from the mask to the HumidX is so short - small volume in which to collect CO2. So, you should have been able to use any mask without humidifier, but to use the HumidX you’d need a special mask. One that doesn’t expel air before the air gets back to the HumidX and one that only allows a small volume of air between the mask and the HumidX. But why not allow regular hoses to connect, and have the HumidX+special P10 with regular hose? Unclear...maybe they didn't want to allow the HumidX to be used on the GO?
I was thinking of getting this machine because at the CPAP shop online I am pretty sure it says you can use it at home, too. I have the regular Air ResMed machine and I hate that you have no choice but to use that water part; no option to make it smaller for travel by just pulling that off and using it without the humidifier. Oh, and having to take a big gallon container of the distilled water with you on a trip or HOPE you can find distilled water in any stores now is really fun!!! I hate that clunky machine that makes me feel like a hospital patient or disabled or something. It is embarrassing. When will making smaller machines be the standard!?!
I got the DreamStation Go before their recall last year, so I had to return that. I am still waiting for them to send me my new one. I fear they won't and then I fear I will have lost my money for it. I bought it myself with my HSA card because I already have the ResMed home station and figured insurance wouldn't cover it. I am super pissed!
Have you (or anyone else watching this video) tried the Z1 or Z2 CPAP? Wondering what your thoughts are on that? Thanks!
Great review. I travel a lot and like to travel light too. Bought a Z1 machine from a sponsor site and used the lefty15 coupon and picked up this sweet little guy for under 500. Used it for 8 nights in Europe. No complaints. did the job, a few acceptable drawbacks. It worked for me though.. check it out.
Thanks for the review. That proprietary tubing really sucks that not compatible with other machine. And also lack of detailed wave report which I think even their APP should support viewing it without SD CARD. Hope Resmed will keep improving user experience.
Hey there I hope you see this and answer! I recently was diagnosed with severe sleep apnea(mostly hypopneas on my sleep study). I've started using the apap. Ive been using Sleepyhead to look at my data and get an idea of my ideal pressure. I like to use the ERP because I hate that feeling of not being able to breath out. I've heard you say that using ERP can cause problems(central apnea, heart problems, RERAs) but I've also heard you say that ERP can help prevent those same problems so I'm confused. If my ideal pressure is a 11 and my ERP is going down to an 8, how could that cause problems, if its just helping me expel carbon dioxide?
Bump
Great vid. I agree that the data sharing SUCKS. This is MY data. I should have access to it. HOWEVER, the mini is really the only option for those of us who want to do deep back country back packing and bring CPAP without weighing you pack down. At 66 every pound counts! WIth the Medistrom Battery, head gear and tubing you are at 34 Oz which is about as low as you can go. I will have to give up some aspects of my DreamStation 2 data and quiet to allow for true cordless portability. I bought the ZephAir Hose adapter ($19 for a 20 cent piece of plastic made by slaves in China) which will allow me to connect my regular hose and head gear to the Mini BUT, and this is a big BUT, I will be using this in the mountains where the air is dry so humidification is not optional. To humidification, you have you use their hose and head gear set up to use the HumidX Plus to improve humidity. Without that, I think you would desiccate your airway at altitude.
Great review, J-man! Thank you!
Hey, can you do one of these for the Transcend Micro? I would love to adjust the pressure on mine myself if that's possible.
The Resmed Airmini machine itself is great and is quiet and of course is very small. But - the air noise coming thru the tube is horrendous. It's impossible for me to relax and fall asleep with that high volume noise from the tube.
I've also experimented getting a universal connector which allows you to now use any CPAP mask and their bigger diameter tubing with the AirMini. But that loud tube air noise just won't go away. My pressure settings are very low at 4.6 so high air pressure can't be blamed. Unfortunately I'm now going to return my Airmini to get a refund and I'll stick to the good old Resmed 10 machine which is so quiet (machine and tube).
Having major buyer's remorse after shelling out $900 for this device. I'd heard complaints in reviews about "noise" - but thought it was more like consistent white noise, which I thought I could deal with. Nope - it comes from the area of the HumidX chamber. I took a free decibel app to my setup, and the AirMini hits close to 60 db with every single inhale. I understand giving up functionality for the small size, but this seems like a HUGE problem with a super easy fix, should ResMed care to redesign the venting.
Thanks for this review! WTF is it with that non-standard tube fitting? Wow... I won't buy it just for that reason. As for the other negatives you mentioned, I could have put up with those but not the proprietary tube fitting.
Can you use this air mini machine when you travel if your normal machine is a Bipap ?
Should I use bi-flex on my dreamstation auto bi-pap? And if so 1,2 or 3? I remember you said you don’t like the relief on the cpap so I was seeing if you feel the same way about bi-flex, thank you very much for making all of your videos they’ve helped me so much.
Do you recommend the air mini or the Z2 Auto! Thank you!
I use the Resmed Mini for travelling. My sleep people supplied an adaptor for the F20 or F10 full face mask at no extra cost.
That "A&J" initials display is cool. Did you have it made?
Thanks, still using the video.
I get you totally. And I am on your side. but it is so small perfect for camping.
I'd still go with the Dreamstation Go for travel. Same size and you can use it at home as well without sacrificing any features...plus not have to buy proprietary masks. Considering the Resmed has an external power supply, they're the same size.
I am using the Airmini 100% of the time now due to the recall, the air filter door is damaged and according to Resmed this is not a replaceable part? The device is not useable without the airfilter door cover. I may try to have the airfilter door cover 3d printed but this seems unreasonable on my part. Resmed customer service thus far has been no help.
My understanding is that the convertors for other masks works fine. Is that correct? thx,
I don't see the Dreamstation Go in stock. Are they still being produced?
I wish I watched your video before buying the machine that costs $910.00 without the accessories. As soon I found out that I have to buy all hoses, special connectors, and different masks, I wanted to return the machine. The company said that since I opened it and they would not take it and I had to talk to the manager to get a return approval and still will pay a 15% restocking fee. The manager ended up ordering the hose and the mask free for me. I just feel that it may not be that good since using different masks is really worrying me. I wish I did not buy it. Is there a market to sell it? I never use it. It is brand new.
Does anyone have trouble with loud air noise in the tubing and elbow? (Ive checked and its not leaking) I own two cpap machines. A system one philips with simplus f&p mask and a resmed mini with airfit f20 mask. The philips system is almost completely silent at the mask end. The resmed mini sounds like a jet engine rush. (without the whine) near your ear. I have to share rooms with workmates and the rushing noise from the narrow tubing and outlet on the mini is going to be an issue. Is there anything I can do? Or is the resmed mini a naturally noisy tubing and elbow/connector/exhaust system? (The machine itself is very quiet by the way)
Thank you so much for the tips on how to change the pressure! My regular APAP caused aerophagia which was very painful. I had it reset to CPAP and had to change the pressure on my mini to prevent it from happening with this one.
I also couldn’t handle the noise from the hose so got the adapter from Amazon and use my regular N20 mask. Can’t use the moisture packs with it but found they didn’t do much anyway. Still better than dragging my large one (Airsense 10 for Her) around when travelling for work.
Hi
I've just bought an Air-Mini and I know that the tube will anoy me
Can you send me a link for the adapter of which you speak please?
ie. from the air-moni to a standard tubing and mask
Thanx
I find it ironic that one of his biggest complaints is about the priority masks when he has an iPhone who Apple is all about that priority.
Are you trying to type "proprietary"? This isn't even in the same category in terms of a comparison. It's SO proprietary that ResMeds own masks don't work on it.
Thank you for the info I was thinking of getting one
This thing is not for you dude, just get a bulk old one and be happy, I am happy with it, loving it!
this is an excellent review of this machine - i started with this and wasted a lot of money on it - its not very good - i switched to the resmed air sense 10 - way better and comfortable - this mini is designed to make money for resmed - just dont buy it .the resmed air sense 10 is portable enough for travel - GREAT REVIEW
Rob Hemsley that’s fine if your not flying. My Dream-station is to bulky to carry in airports and on the plane.
The problem I see is that with the R.A.S. 10, you need a distilled water supply. Not EZ when you travel.
@@davidinmd712 I've been told distilled is not required. They just recommend that because most people don't clean their tanks. If you use twice boiled water it should be fine.
If anyone else has trouble entering clinical mode: if the AirMini is already paired with your phone, but the app asks you to pair again via bluetooth when in clinical mode, try unplugging the AirMini, waiting a bit, and then plugging it back in. When my AirMini powered up, it skipped the pairing step and the app went straight into settings.
Hi
I've just bought an Air-Mini and I know that the tube will anoy me
Can you send me a link for the adapter of which you speak please?
ie. from the air-moni to a standard tubing and mask
Thanx
Super helpful! Thank you!
Your sleep data is stored on the app so there's no need for an SD card. You also don't need distilled water to use it due to the filter on the mask and also why you can only use their hose
Hello I am a new to the CPAP world
And i would like to know information as how i can help out my partner we are waiting on a home base staion kit for her, BUT i travel and camp or backpack a lot and i feel like being hooked up to a machine will improve her quality of sleep but at the price of NOT being able to do what i love doing being outdoors!
Please people help me out and let me know if i should buy this mini cpap and what battery combo do i need?
Also i have a 200w 10ah solar panel to charge my batteries if needed and what adapter converter would i need for
DC -DC ?
Any helpful information will be greatly appreciated 🙂
Thank you for taking the time to read my post.
Thanks!
I just purchased the Mini for a train trip we just got back from and so far I liked the unit. I like the App and I hate the mask. I know there are only two masks that are certified for this unit I prefer the other one, of course. I used it for a few nights at home prior to leaving and it worked great, except for the mask.
What do you recommend for a travel cpap as an auxiliary unit to a full size?
I just got this machine. I've used it for one week when traveling overseas. I like it. However.....(there's always a but...) I have now found out that I can't download any data to print out or even send to my dr. as I'm required in order to keep my pilot license and my job. This machine is great but that sucks. If anyone has any idea how to get that data let me know ASAP. Otherwise I'm going to send it back while im in the 30 day trial period.
Love my AirMini and was surprised by this guys negative review. He is not a calm miserable guy as he stated in the review but just the opposite.
I use my AirMini for home and travel and prefer the unit to my full size unit provided thru Kaiser. Consider this a worthless and suspiciously negative review by a negative individual.
This guy is hillarious and honest - great reviiew. I am now also completely unexcited about the Airmini
where can I but this air mini? its not on Amazon, thanks
Please...review the Z1 Auto...
Transcend 365 Auto miniCPAP Machine with Heated Humidifier, how to change the pressure?
When my Dream Station got recalled, I purchased the AirMini. Of course, I got ripped off as the price was high after the recall. Wish I'd known about your website. What you say is true...the mask situation is abysmal. Just when I found a mask for the Dream Station that worked for me after 5 years of trial and error, the machine gets recalled! What I don't like about the mini which you didn't mention is that the air sound is loud compared to the Dream Station.
Wish I could afford any of these machines
I wish I could help you out with that. 😔
Thanks for this review. I was thinking about buying one of these and putting in the settings from my Aircurve 10s. However, the inability to pull the data is a dealbreaker. I MUST have the ability to pull my own data as a CDL driver.
I use the OSCAR program on Windows 10 for pulling and printing out my data right before my DOT physical every year. Some doctors that do the physicals can/will do it themselves if I bring them the SD card. Other ones can't be bothered if doing that isn't part of their normal routine (they're different depending on what company I drive for)
I hope this Adapter wrks? 🤔
Looks like it would be good for backpacking. Nobody’s talking about that.
You can take it backpacking......now two people are talking about it. ;^)
Battery works well....but HEAVY.
I have a colonoscopy/upper gi I requested to use my CPAP during and after the procedure.
I have read how safe it is even with apnea, still would like the machine, I am wondering how the doc will react, I was expecting a return email but it is president's day.
So probably tomorrow.
I am hoping it is a non issue, I am planning to use my pillow mask, an endoscop mask would be ideal but some of what I read makes it more of a chore for the doc, not my goal I also saw some remarks on the cost.
I am thinking of a basic full face cpap mask with a port for the scope.
Thank you!!
I have a brand new one, and the mask makes so much noise I really can’t use it. I don’t have a humidifier, the mask doesn’t leak, and the filter isn’t clogged. The noise isn’t from the machine, is air flowing through the mask, so the noise is right next to my face. I’ve bought the adaptor and used the mask from my home machine - I sound like Darth Vader with a head cold. It’s really horrible.
What app replaced Sleepyhead?
If there is no way to track data, I guess insurance won't cover it?
I think my insurance needs to see compliance as well as my doctor.
I want to buy the p10 mask for airmini but I couldn’t find it
Resmed AirFit N30i please. I appreciate your videos and my DreamWear slides off my head so wanna try this new one. Thanks.
Working on it now.
😃 thank you!
What's a good pressure. Mine DeVilbiss increases and I turn off the machine and start it over. Too much pressure is uncomfortable.
There is no good pressure, just a pressure that is optimal for you.
do they have a bipap travel size
You have to specialty order a chip tube,the standard one won't work
Watching this makes wonder how this stuff can be so poorly designed. I modified the frame of my Fisher & Paykel Simplus I installed a shield (made from a plastic soap bottle and duct tape) that keeps the discharge air from blowing into my eyes. Modified the mask is quite comfortable. I've have a nasal pillow, but don't care for it much, but there's nothing really wrong with it. I have been looking for another mask, because I'd rather not have to make the modification to the frame, but of the two others I've tried, I found one to be uncomfortable and the other to be ridiculous in terms of almost every aspect. It's hard to believe anyone might like it. The little machine you reviewed has some very obvious shortcomings. Why they would design a contraption with a bobber that bangs on your chin is beyond me. Can't the designers see something as obvious as that?
Yeah.....seems like a flaw to me.
have you tried tying spring loaded string from ceiling to breathing tube to lift it slightly giving nice even weight.
Hi Jason! I appreciate your informative videos. I was interested in becoming a registered polysomnographic tech and wanted your opinion about the prospective job field. I've searched online but nothing too current was available. I would appreciate your insight. Thanks
I think it’s really difficult to break into now. Labs are consolidating and reimbursements are dropping....about as low as they can be without folding. Go into it cautiously optimistic. ASTEP programs are your first step.
Get the teamed 10 with humidifier.
Prices?