Dryer Repair - Replacing the Motor Pulley (Whirlpool Part
Вставка
- Опубліковано 28 чер 2017
- Click here for more information on this part, installation instructions and more. www.partselect.com/PS11744884-...
This particular Motor Pulley is specific to Whirlpool, Kenmore, KitchenAid, Roper, Maytag, Estate, Crosley, Inglis, Amana, Admiral amd Magic Chef. To find a Motor Pulley specific to your model, visit www.PartSelect.com.
If your Dryer is having any of these symptoms, then replacing the Motor Pulley could solve your appliance problem.
1) Will not tumble
2) Noisy
Internal Part Number: PS11744884
OEM Part Number: WP8066184
Tools used for this repair/replacement:
1) #2 Philips Screw Driver
2) Small flat blade screw driver
3) 5/16ths nut driver
4) 7/16ths wrench
5) Adjustable wrench
Get model-specific repair help from PartSelect.com. Learn how to troubleshoot, diagnose and repair your appliance with user-generated installation instructions and hundreds of step-by-step repair videos. - Навчання та стиль
Thanks for this video, I really appreciate the part where you show how the belt and idler pulley should go without the drum in. Great video!
I love these videos, the music makes it feel like I am on a cheery adventure. Thank you!
Showing how to align the drum with the belt/tensioner attached was the key, thank you so much!
Very good video Sears closed it's doors in my town back in 2018 this video saved me a headache and money!.
I replaced broken belt & pully yesterday. Saved over $220! Thank you!!!
Thank you much for the video!!! You sir, saved me $250 dollars in repairs. I only spent $7 dollars for the motor pulley. Thank you!!! 🙏
Was your dryer screeching really loud?
Thank you so much for making these videos. I repaired my dryer with ease.
PERFECT EXPLANATION. Life saver
This video helped me fix my dryer. Thank you!! 👍🏻
thank you my crosley threw the belt could not figure out how tensioner went back in this helped out alot
Great video only problem with mine is the reason I'm replacing mine is the pulley snapped in half so nowhere to put the adjustable wrench.
Mine did too. I used a vise grip to remove the snapped part
@@mlea3612 how though? There's literally no room to get the wrench behind the broken part or even get enough grip to get it to break loose
@@shaenak3014 I was able to get a vise grip into the space and with little room was able to slowly back it out
You are the man!!!
You just saved me a heap of $$$
God bless you!
Thank you. Your video saved me at work.
Great video, this solved my noisy problem. thank you.
Thank you! This video answered some important questions for me.
Nice work Elder
Thank you for the video really helpful!
Excellent video very well detailed explanation on step by step repair.thank you!
Thanks so much you're the best!
Thank you, this was a helpful video.
Thanks so much for this video helped alot.....now waiting to see if it works
Thank you for this video it came in handy
Thanks helped a lot.
You should have video when the pully is snapped off. And it's not so easy to take off. Lol
Great Video...Thanks a bunch!
Glad you liked it!
Very helpful video but what if the motor pulley is broken and there is no place for a wrench or socket because that piece broke off? The remaining bell shaped part is still screwed on and will not budge. HELP!
I really appreciate the way you explained everything in ENGLISH 😁 and slowly so even a College educated veteran could understand. I love my dryer. It's survived 3 growing children and then I saw a broken belt, I thought it was a easy repair. After removing the drum, I noticed that the Pulley was broken. Then your video, $35 and an hour later I have a new dryer. THANKS
Hello, Someone know how to remove de the motor pulley if is broken?
Thanks so much!!
Thankyou gracias
Just ordered my pulley, question any oil/lubrication for replacement?
THANKS-A-LOT!
Arizona Jones
I replaced the motor pulley but now the two holes for the lint screen opening aren’t aligned
Really good video. This dryer is very similar to my GE GEQ9800LW1 dryer. What symptoms would lead you to need to replace the motor pulley? My dryer is squealing as if the belt is slipping, even with light loads. It's been getting worse over time and appeared to have started when I took the dryer apart to replace the thermal fuse. I'm at my wits end as I've replaced the belt, rollers, and just now the idler pulley spring. Thanks in advance...Jonathan
I know this is a year old but you need to replace the rollers to fix this, I had the same issue. It’s only slightly more involved than the fix in this video, you can do it!
Mine won't budge and I am afraid it will start to strip that flat part that you put the 7/16 on. I don't know who put the last one on but Hulk comes to mind. Next gonna try heating for a quick 15 sec with a torch or 3 min with a hair dryer.
Thanks
I love you got it
My dryer drum doesn't pop off like that. Do I need to remove the screws at the back (inside the drum)?
"Just a little bump to get it started" ... judo chop! "Bam!!!"
What would continually cause the motor pulley to keep breaking? I’ve replace mine 3 times and the hex end keeps breaking off causing the belt to fly. I’m certain it’s not because I’m over tightening. Anything would help, thanks!
It's just made of cheap metal aluminum I think and it just give out in time, but three times is a lot, had mine for 10 years before I replaced it. whirlpool
Maybe over loading the dryer. I try not to put to much weight but then your drying more.
My bolt is sheared how can I get it off?
What’s the reason you would need to change it ? My dryer is making a really loud noise like a bearing might be going out.
Hello, could you please supply your model number and I will be happy to research this for you.
PartSelect Sorry it took so long to get back to you anyways it is a Maytag dryer model MGD5630TQ0 I watched your video and I think it might be the drum glides my dryer is making the exact same noise as the one on your video
Hi, when researching your model for symptom, loud noises, the top part that have been purchased by customers to help with the noise are the drum glides (bearing) or the drum roller shafts. There is a left and right side shaft. If you would like to place an order please call us at 1-888-738-4871 and we will be happy to help you.
Lasurge1982, I have a two stroke maytag multi-motor that was built in 1928, it was used to power a maytag washing machine.
I had to replace the on on my parent's dryer. The front part of the motor pulley that has the head for the wrench completely sheared off.
Got her running ole son thanks
I tried this and couldn't budge them. Just the fan blade came off the other side
What if the pulley head can off?
Máy của tôi đang chạy tự nhiên không chạy nữa có ai biết chỉ giúp tôi với tôi xin trân thành cảm ơn
This video is generally helpful, but 1:39 and following lack crucial guidance as to what you're supposed to move where.
You skipped the front pannel
Can the motor pulley be installed in the opposite direction? I need to replace mine but it will not thread on with the cone facing the motor.
It should be installed as it came off your motor. It has a taper inside that matches the motor shaft so it stays on tight. If it wont thread on the normal way but it does when reversed it is likely there is an issue with the treads insde the pulley. I would recommend replacing the pulley.
Every one of these repair videos are good and helpful, but you can do without the cheesy music which adds nothing useful and is just irritating.
Nice constructive criticism lol
Dude skipping steps and everything
sorry, this did not help me, half of the video was always coverd due to writing on screen