1979 Puch Magnum Project Part 7 - Seat Cover Replacement/Pan Repaint

Repainting seat pan and replacing the original seat cover with one from "Miss Tammiecat~" on MopedArmy -
www.mopedarmy.com/forums/read....
I sped up the painting, grinding parts etc, but the seat cover part is normal speed so its easier to see what I'm doing. First time and I could have got it a bit tighter, but the results are still excellent and I highly recommend Miss Tammiecat - Took about 4 day to receive the cover after I sent a message.
Angle Grinder to get the majority of the rust off the seat pan followed by a dremel wire brush to get in the hard to reach areas.
Phosphor Prep and Etch from Home Depot to clean up any remaining rust and etch the metal surface for painting.
Wipe down and let dry.
Primer coat of Rustoleum Clean Metal Primer (x2).
www.amazon.com/gp/product/B000...
Top coat (x2) of what I happened to have laying around (The two paints are compatible, but generally just stick to the same brand as the primer).
Krylon High Strength Spray Adhesive (model 9090) to attach foam to the pan and then the cover to the foam. It seems to hold very well.
www.amazon.com/gp/product/B007...
The Edging is 6 feet of Item 8451A35, Self-Gripping Plastic Edge Trim with Metal Core from McMaster-Carr, but I believe they may have sent me the textured version instead which is Item 8451A63
www.mcmaster.com/#catalog/119/...
The edging combined with the spray adhesive seems to make the metal tabs unnecessary so I pressed them flat and did not use them at all.

[@silkboxing4454]

Great job. Covering these seats take a lot of patience!!!

[@Sheep-Gate-Org]

Thanks Bro. You spoiled us by always showing what your using. Thanks for the Great Videos.

[@n1bpd]

Yeah sorry about that, thanks for the heads up - I added an annotation.
Nice to hear from someone who enjoys my videos !

[@n1bpd]

It's "Phosporic Prep and Etch", made by "Klean-Strip", Model GKPA30220. It removes any remaining rust and etches the metal so the primer will adhere better. Home Depot etc sell it.

[@TheV1S]

hey i like your vids, you work very precise. just one point, you should always spray upwards when using cans. or u might end up getting huge splashes of paint on certain spots.. peace

[@reneholzl1263]

I like it

[@miam7124]

What do you call the trim that you are using to connect the fabric to the metal seat form and where can I get that?

[@Sheep-Gate-Org]

what are you applying at the 4:38 time mark of this video?

[@klaasomega1]

GEWELDIG VAKMAN.....Leuke film...Kijk op You Tube..kauwe klauwe dag 28 januari 2018 gefilmd door joop visser