COMPLETE PAINT JOB with the SPRAYIT R500 LVLP spray gun and a small compressor
Вставка
- Опубліковано 8 лют 2025
- In today’s video I do a complete paint job using the SprayIT R500 low volume low pressure gravity feed spray gun and my small 21 gallon compressor on a 2012 Chevy Tahoe and show you that it is very possible to paint your vehicle using a LVLP spray gun and a small compressor at home in your garage.
SprayIT SP-33000 LVLP spray gun kit: amzn.to/3N0DofT
R500 lvlp spray gun: amzn.to/3MMNLnN
I dont care if this is 3 years old....this guy is one of my favorite guys. The average guy's champ for DIY
Appreciate you Joshua🙏🏽💯
@UndergroundPaintKing we appreciate YOU brother
The algorithm sent me this gem of a channel. No bullshit, straight to the point, not some sponsored infomercial shill
I’m definitely not sponsored I just do this for the people really trying to gain some skills…I really appreciate you checking out the channel and liking the content!
Dude had me with the intro; lol.
Thanks for showing me that I don't need to invest $800.00 in a compressor to spray a car. I now have the confidence to paint my Civic!
You’re welcome and I appreciate you for checking out the video!
shit old civic can paint brush and have better than new civic. no matter how paint have only big shit civic.
@@UndergroundPaintKing
Hey brother where did you get that color mixed up at and how much??
@@ibanezsrbass1759 I got it mixed at my local paint supplier but I don’t remember how much I paid for it
@@UndergroundPaintKing
Ok thank you bro!
I do spray wraps and people have been telling me for YEARS, you cant do a car with LVLP. Im up in NYC, we dont have room for large compressors. I am glad someone did a video showing it can be done. Shout out to the king
Appreciate you Kraiden and I’m glad the channel was helpful! You definitely can do your vehicles with a small compressor setup 💯
Have you done wraps with lvlp? I’m curious if it can be done. Specifically Raail spherical or auto flex?
As a 45 year car guy most of my life that has been around high end builds and daily builds, I can say without a shadow of doubt that this is very obtainable for the average blue collar person on a tight budget. If you can't afford a 5K and up paint job, but have the space, a compressor LVLP paint gun, and some sweat equity you can have a great paint job if you follow the basics.
@@deeevans324 I completely agree with you Dee and appreciate you checking out the video 🙏🏽💯
I gotta say, UPK is inspirational. I do small stuff, mostly guitars and bicycles and I’m trying to move on from rattle cans, but get scared away when I hear about needing to get 5 HP, 3 phase, 60 gallon compressor. Seeing UPK paint up a monster Chevy Tahoe with a 21 gallon compressor and a LVLP gun is mighty impressive.
I appreciate you Sean and you definitely can do it and not need all the big equipment to pull it off…I hope the channel is helpful to you!
You have no idea how much money and time you saved me. I was about to go out and buy a 60 gallon to paint my car but not anymore! Many thanks!
You’re welcome and I’m glad I could help in any way…I appreciate you checking out the video!
Maaan i cant tell you how much you blessed me just now with this info, im in college and been tryna figure out a way to get my car painted without emptying my pockets. i was getting real discouraged from the info from other youtubers and forums saying i gotta drop a grand on a giant ass compressor alone😂. U a life saver for sho
Glad I could help out Breezy, you definitely don’t have to break the bank to paint your car 💯💪🏾
Color looks insanely good on that truck. Thanks for making this video. Just picked up an Inokraft LVLP and a 20 gallon compressor, was second guessing myself but now see it’s easily possible.
@@jtfoog5220 glad the video was helpful to you Jtfoog and good luck to you 💯 I hope the channel continues to help out 💪🏾
That's what I'm talking about most of us that watch these videos don't have expensive equipment we do it for the love of it
And that my friend is why I make these videos for the people that love to do it and don’t have the shop setting that makes things easier…I want to show people that it still can be done and done nicely!…I appreciate you taking time to check out the video!
I’ve never seen this channel before and I’ve been watching UA-cam and auto body vids for more years than I can count.
This gentleman is humble, not a loudmouth and spitting facts.
I have different compressors, but for mid size jobs I use a 20 gallon husky from Home Depot. I spray clear in the mid 30’s for PSI with my 1.3 Iwata and I can hold the gun wide open nonstop and it and I never lose air pressure. It builds enough pressure that it’ll still shut off from building enough air.
Honestly
, you could use a ten gallon compressor to paint a hood, or a few panels at a time.
The only things I’d say is run the 1/2 inch air hose keep the hose as short as possible use the bigger fittings, make sure you get a compressor that takes oil, make sure you use a moisture trap before the gun…….. always make sure you open the bleed valve on the compressor when your done using it.
Most of the guys on UA-cam even the diy guys make a lot of this stuff sound wayyy more complicated and confusing than it really is. Spraying is the easy part. The bodywork and prep is the hard part.
You’re spitting all facts and I appreciate you leaving this comment 🙏🏽💯
Damn bruh, I'm glad I found your channel. I've learned more watching you and sprayway customs in the past month, than all the big shots channels in years. My hat's off to you brother, I wish you all the success in the world.
I love this video more
Thank you I appreciate that
Thanks bro I’m glad that I could be of any assistance in the work that you are doing and I appreciate you checking out the videos!
This is THE most accurate comment for real. I feel exactly the same
SprayWray is awesome and so is UPK. Pharraway is great too. Also check out True Gritt. Not really a 'how to' channel, but he does some crazy pearl combinations that are great inspiration.
Amazing job love this channel.
Thanks General, I appreciate you checking out the videos 🙏🏽💯
Great job UPK! I noticed from bondo billy, he has a separate 3' air hose with the regulator and the water filter setup, being 3 feet before the gun, that gets held by the non painting hand. I made myself one. Helps with the really low stuff, not having those 2 items directly attached to the gun, also prevents any water from possibly coming out at the connections before the water filter that is really close to the gun, no possible way of a drip on a hood or roof.
@@doug2993 appreciate that Doug and that’s a good idea, I’ll have to try it 💯
@ yeah brother, he didn’t make a video about it, but I noticed and thought that’s brilliant.
@ definitely makes sense!
Bruh!! You're my new hero. As soon as my buddy puts the exhaust on my racecar I'll be using the same setup. I will be telling everyone about your channel. Thanks again bruh.
Appreciate you bro and you’re welcome…I do this for my people!!!
Hands down the best videos I’ve seen in a hot minute
Thanks I appreciate that and appreciate you checking out the videos!
I love the ingenuity that went behind making this work with a small compressor. The results are outstanding!
Thank you and I appreciate you checking out the video and hope it helps if you intend on doing this for a project of yours!
UPK in the building........Damn son you put that myth to bed. Awesome job it came out really nice. Thanks for showing us it can be done.
Yessir! #MythBuster…I appreciate you checking out the video!
i remember the good old days hanging out in a garage working and painting cars with a couple old buds looks good, keep up the good work
Thanks Lisa I appreciate that and appreciate you checking out the video…it would be nice to have more good old days!!!
I've been doing paint work for the car dealerships for 30 years, I have a R500 , good gun . 😊
The R500 is a great gun in my opinion especially for the price 💯
Giving credit where it's do. The person makes a difference too. Like video don't let no one tell you you can't . lovin it
Yes sir !…I appreciate you checking out the video
I also love to hear one motivate others.
@@aaronellinger2662 this channel is definitely about motivating others 🙏🏽💯
WOW...Proof it can be done with no BS. Love your approach to this. I bought the gun and am practicing panels first. Now I know if it doesn't work, it's me. Thank you.
You’re welcome and it’ll definitely work for you !
I've tried this crap 2 years ago before with a cattle trailer, Chassis Saver, SprayIt 1.7mm siphon gun, and an old Champion 30 gal. air compressor. It only managed to spray half of the rear door before running out of air. I spent most of my time waiting on the compressor to refill.
Ended up using my Fuji turbine system that I use for woodworking since I had no other options at the time and it worked out better than the SprayIt LVLP kit.
I finally bought an Industrial Air 60gal with 13.4cfm @ 40psi that can run an HVLP gun and haven't touched the SprayIt LVLP spray guns for more than a year. On top of that, they spray like a glorified rattle can but that's just my two cents and your ACTUAL experience may vary since the compressor I used was built back in the 1940s.
Just a heads up, California Air Tools who sells the SprayIt LVLP kits has really poor customer service so if you run into a problem they typically don't respond and will leave you hanging just so you know 😉
I hate that you had that bad experience with the SprayIT and glad you found something that worked for you until you got the 60gal compressor setup…I also appreciate you for the heads-up on the company service I myself have never dealt with them but if I have to in the future I know what to expect…Thanks again Weaver Cattle Company!
I bought the Fortress 27gal 200PSI air compressor today from Harbor Freight. They even gave me a free air impact gun. $120 gun. SMH. They're stepping up. I think I'm set now. I think the A610 will run fine. Been watching your videos. Thanks for always hitting me up in the comments. You're bringing back the love I had for painting in my Air Force days. I'm gonna work on building myself a nice spray booth next. Thinking about flipping utility trailers to grab some extra cash. Work my way up. You do good work, bro.
I appreciate you SGT Rickards and you got a nice package deal 💯 let me know your thoughts on the A610 and I hope the channel continues to be helpful to you in anyway possible ❗️Welcome Back💪🏾
I love the spirit of entrepreneurship exhibited on your channel, straight-forward information with no chaser. I love detailing but appreciate the painting process as well. All the success in the universe is what I desire for your and your audience here on youtube!!!!
Thanks I greatly appreciate that and appreciate you…All the success to you as well my friend!!!
The folks that say it can't be done either don't know enough, or charge big dollars for a paint job. Excellent video.
I'll be doing my 93 Z24 soon with an 8gal compressor, some water/oil filters, and some single stage. Two tone is also a good option for a small compressor setup as you can split up the spray time.
There is plenty videos on people doing paint jobs with small compressors so we can put that myth to rest…what color are you doing your Z24?
Nice job 🤠
In México we use that gun, it works so good and its a very usefull tool.
Thank you and it’s great to hear others having success with it💪🏾💯👍🏾 I appreciate you checking out the video
So far your the only one who explains everything very well. And yr not in a hurry to explain. You have definitely encouraged me to start painting, I’m just a beginner, thanks for taking yr time to make these videos…God Bless you !
I’m glad to hear the videos were encouraging to you and I know you’ll do great Israel!
Peeps telling me I need a 60 gallon tank. You the man great info. I like alternatives. I am motivated now.
Glad the video helps Killa Bee, you can definitely get it done with a small setup!
And that is how you do that, excilent job UPK
Thanks Pharraway I appreciate you checking out the video bro!
Thank you for putting this out, i couldnt find anything anywhere that told me i didnt have to invest thousands into tools for what is likely a 1 time project. Great content man.
Thanks I appreciate you checking out the video and I hope the video is helpful!
That grey looks awesome on her! Beautiful job, and excellent job at showing that we don't need high end equipment for DIY projects!
Thanks I appreciate you checking out the video and you’re right that you can get those projects done and don’t have to have big shop equipment to do it
Enough talk, UPK you sold me with this great video! A lot of us appreciate your, info, hard work and dedication to this craft...
Thanks Ziggy that means a lot to me and I appreciate you checking out the videos!
Thank you. I have a craftsman 20 gal compressor plus an extra 10 gal storage tank. You have inspired me to use it to paint my 86 square body truck after I learn to weld and do bodywork. I have the welder and the welding table. All new to me but it is people like you who keep me inspired. I am up here in British Columbia Canada. Thank you.
Glad I could inspire Paul🙏🏽 it sounds like you have a fun project and good luck to you on it💯 I hope the channel will help along the way !
@@UndergroundPaintKing Your words are an inspiration I have subscribed.Thank you.
@@paulwest2575 I really appreciate that and appreciate you subscribing to the channel 🙏🏽💯
Looks great! Just shows what you can do with a little planning, the right equipment and a lot of talent! For a while Harbor Freight sold automatic air tank drains that would cycle every time the pump cycled on and off but cracking the valve on the bottom is a great tip and simple solution.
Thank you sir I appreciate you watching the video!
Looks great. A big part of it is how smooth and consistent you are with your spray speed. Great job
Thanks I appreciate that and appreciate you checking out the video!
Exactly my thoughts he gots a consistent stroke ... That's a big part of spraying
Nice job as usual UPK - have a good weekend.
Thanks Jerry I appreciate you as always and enjoy your weekend as well!
That little thing did the job now I know I won't have a problem with my el camino especially since imma be painting it in sections
Nice to hear that you had great results with it💪🏾💯
What results did you get? I’m trying to paint mine too
This a proven fact that you don’t have to have a expensive air compressor or a expensive paint gun to get the job done.shout out to you🙌🏾🙌🏾🙌🏾🙌🏾you help me and others to see this live🔥🔥🔥🔥🔥🔥
Oh yeah you definitely can get the job done without expensive equipment!…I appreciate you checking out the video and I do my best to help my people out with the content 💯🤛🏾
@@UndergroundPaintKing thank you for taking the time to teach me💪🏾💪🏾💪🏾💪🏾my uncle taught me that when you obtain the knowledge,you got it
@@antonioharbor you’re welcome bro and your uncle is a wise man💯
@@UndergroundPaintKing 🙏🙏🙏🙏rest in peace unc
Knock that boy on out, didn't you King 👑 👍🏾🔥🔥👍🏾
Yessir! I appreciate you checking out the video Sprayway!
Played it down with ease, I'm ready to gone use mine now lol got me hyped
And sprayway in tuned in. Yea lemme catch up on some of these vlogs.
@@412AutoCare i said the same shit
Tko
Man that looks so good. And yes I love my SprayItt 33000 on my 33gal Craftsman 💪🏽💯
Great to hear success stories on the SprayIT spray gun…I appreciate you and thanks for checking out the video!
That is an awesome and outstanding job that you did. I also enjoyed the instructorship. Salute my dawg 💪🏾💯
Thanks I appreciate you checking out the video 💯
I just received my sprayit 33000 can’t wait to try it out with the exact compressor, thanks UPK.
Good to hear Victor, let me know what you think about it!
I was wondering if I could paint my whole truck with my 21 gallon air compressor and was wondering what kind of gun do I need. But after watching this video I believe I can and I believe I figure out what gun to get. Thank for the video and the paint job looks absolutely beautiful. I just hope I can get my truck to turn out that good aswell.
You’re welcome and I’m glad the video was helpful Michael!
Love the drain tip, Tahoe looks great, thumbs up👍!
Thanks I appreciate you checking out the video and glad you liked the tip💯🤛🏾
@@UndergroundPaintKing is the drain partially open while spraying?
@@luisdiaz9142 yes it is,you just want it open enough to drain the water while spraying but not allowing to drain all your air from the tank
@@UndergroundPaintKingThanks for the reply!!
@@luisdiaz9142 you’re welcome!
Just getting into spraying and I have a small compressor. Thank you for the time sir
You’re welcome and I appreciate you checking out the video
Looks good I like the red emblems
Yeah the little touches with the emblems and letters helped bring the paint job together…I appreciate you checking out the video!
Nice job painting that beast with the LVLP and a HF compressor!
Thank you sir! I appreciate you checking out the video!
Thank you so much for this. I'm just a home guy and didn't want to commit to a overspending on a compressor to paint a car. You earned my sub. Can't wait to see more.
You’re welcome and I appreciate you for subscribing to the channel!…I’m doing my best to show people that you can accomplish nice work without the big shop setup and the expensive tools
I've been binge watching your videos. After watching another painters' channel. He's got a million dollar booth and arsenal of paint guns that cost more than my cars. You just get it done! I've been using the old Harbor freight pro gun for projects for 10 years. I normally shoot single stage urethane and it does a great job. But I'm on the fence now to get that Spectrum or Get the Astro. I see these other guys with booths and fancy climate controls and $800 guns they have orange peel, fisheyes, and dirt nibs everywhere. You spray in your little garage and it looks like glass. I did the roof of my 63 GMC panel truck in my driveway under a canopy. Great channel! You are the U.P. King!
Thanks I really appreciate you for this comment because I really try to show people that you can have quality work done by you yourself and not have to have all the fancy equipment that others say you have to have…again I appreciate you checking out the videos and I hope they help in any way possible!!!
So good, and thanks for taking on a real challenge for that setup with that big truck. I've got a similar size compressor with plans to paint a '91 Land Cruiser. Was looking at 4-stage HVLP turbines but with careful planning this is totally doable at about 1/10 the cost! Thank you!
You’re welcome and you can definitely do it without having to spend 1000s on equipment…I appreciate you checking out the video!
This was a very outstanding video , great results on the Tahoe , sub earned
Thanks FNG83 I appreciate you checking out the video and subscribing to the channel!
Thanks for making this video, I have been spending countless hours researching compressors form my HVLP and did not want to spend 1 k on a 220 v compressor. Now it makes sense instead to buy a LVLP/
I’m glad the video was helpful and I appreciate you checking it out EJD D!
Looking real nice I painted a 1964 Impala those low volume gravity-fed guns are good it does the work real nice just like your Tahoe it came out real good.
Glad to hear you had a great experience with a lvlp spray gun Manuel 💯
I have owned a Sprayit 3300. It was a great gun BUT after four paint jobs the inner teflon bushing for the needle started leaking and I was unable to get any parts for it. I would definitely recommend this gun to anyone. Just be aware of issue after a couple of uses.
Did you use it doing 4 complete jobs when it started leaking? I myself have used it 3 times now and definitely will keep this in mind and appreciate you letting me know about this
@@UndergroundPaintKing yes unfortunately it did. But it was definitely a good gun. Not sure if the 3300 has better parts. I do play to purchase another one for small jobs. I used a Tekna copper now GREAT GUN!!
Great demonstration and results! Thanks again for the review on the Spectrum Paint System. Picked up a "starter" set and both adapters and am pleased with both value and quality level. Keep up the great work!!!
I’m glad the videos are of some help and are pleased with the paint system and adapters…I appreciate you checking out the videos
For what you had to paint that it looks great nice job 👏
Thanks Charlie I appreciate you checking out the video 💯🤛🏾
Just stumbled upon youre chanel OG. Love that you straight to the point. i was just about to go buy a 60 gallon compressor this weekend to get my side hustle started until i saw this video.keep up the good work god bless
I’m glad you came across the channel J and I hope it’s helpful to you on your side hustle 💯💪🏾
Great stuff! I painted my MR2 (admittedly a tiny car) with a 20 year-old 33 gallon Craftsman compressor. Filtration is huge, since the compressor is going to run a lot and the heat will cause condensarion in the tank. There are lots of good videos on UA-cam about how to build copper cooling manifolds. Definitely worth the trouble.
Thanks GoalieLife I appreciate you checking out the video and I agree that having the right filtration system is worth it!
@@UndergroundPaintKing Thank you for the video!
@@grimson you’re welcome!
Looks good. But why on earth would you paint over the emblem glue? Just asking.
Painting over the emblem glue doesn’t effect anything an shows you where exactly the emblem placement is…I appreciate you checking out the video!
i watched ya last vid ordered this gun opened it on my channel couple days ago live after seeing this i wanna have me another one on deck lol and the money i would spend on a larger compressor i can buy some paint :-)
Definitely can go that route and save you some money and put it towards your paint
UPK back at it.! 🔥🔥🔥🔥Showing you a real painter compensates no matter the gun or set up to get that same good result! Props man. Those Tahoes are a lot bigger in person.
Bro them Tahoes really are big in real life…I appreciate you bro as always 💪🏾💯
I have done the same with my 3M Accuspray and twinning 2 5 gallon contractor compressors together. You did great on your video and paint job!
Thanks I appreciate you and it’s always good to hear about people having success with small setups!
I can't upgrade the electrical in my house enough to run a bigger compressor. I have the same compressor. It's good to see you don't have to stop every time the compressor kicks on. Great video.
Definitely keeps consistent air flow so you can definitely get the job done with a small set up!
I love my people's 👋👋👋👋👋👋👋👋👋. I can feel the humble spirit👍. Great job king.
Thank you I really appreciate that and appreciate you checking out the video!!!
You my friend got a new subscriber!.. 👏🏽👍🏽 looks good now I need help finding out the measurements on how much reducer and paint and clear coat to use I would I appreciate that’s where I need the help of you have video of that already please link it on my conversation thank you
I appreciate you subscribing to the channel and I do have a video that may help you
ua-cam.com/video/GU1XFq6SWDY/v-deo.html
How you mix your paint and clear depends on the brand that you go with and their mix ratio for their products so just check the label of the products or get tech sheets with the information on how to mix
No sé inglés pero es "awesome"
Gracias, te agradezco que hayas comprobado el vídeo!
Great video I bought a 3300 come with 3 different spray tips primer sealer base coat and clear coat doing a vw bug you took all the doubts away
Great color! YOU ROCK
Thanks I appreciate you checking out the video…I need to get that kit so I can have the other tips as well and I’m glad the video helped in any way possible!
Awsome video, I have a 21 gal compressor and was going to buy a new 30 gal to paint my '77 truck. great job, the Tahoe looked fantastic. Thanks for posting.
Thanks I appreciate you and glad to hear you plan on putting in the work yourself!!!
Thanks for doing a full car with this set up. It looks great!
You’re welcome and I appreciate you checking out the video!
Nice job, it's because people like you I'll be painting my truck soon... Thank you so much.
Thank you and you’re welcome…I’m glad to hear that you’re going to be doing your truck soon and I hope it turns out just how you want it bro!
And I’d like to add that the equipment is not what makes you good at this. It definitely helps but these results are 100% because this man has taken time he’s prepared the vehicle before the paint job i personally detrim vehicles but the point is take your time do the steps and prep yourself before you shoot amazing job my guy 🤘🤘🤘
You’re right and I like to break vehicles down also but you get some customers that don’t want to pay for everything…but if you take your time you can get great results and if you have even better equipment you can get better results so the point I’m trying to get across is no matter what level you are on you can still do this kind of work…I appreciate you checking out the video 💯🤛🏾
Just the kind of real world review I was looking for, that Tahoe looks amazing!
Thanks John I appreciate you checking out the video!
Was it you that had a motorguard filter in your home set-up?.
I had a 2 stage filter with desiccant beads, but added the motorguard filter near my paint room. Now i'm not seeing any water coming thru so pretty happy with it so far👍👍👍
Yeah Bear, I’m using it at my home setup, it works well!
Thanks for sharing this knowledge. I thought I needed a 60 gallon $compressor $ but 30 will do. I am going to spray a 2015 Dodge Challenger rear quarter panel with my 30 gallon compressor. No excuses gotta get my project done. I have hope now 🙏 thanks
You’re welcome Jeremy and your 30 gallon will be plenty for knocking out that quarter panel 💯
Paint looked good! Just ordered the R500 and ALL THE TIPS(4)
Thanks Hogman22 I appreciate you and you’re going to like the SprayIT 💯
Hey man I've been using the same compressor for years And it'sade me alot of money, but I did ad a water trap and oil separator to it, I've never got water in my lines in almost 10 years and over 100 paint and mechanic jobs. But man you did a great job!!
Thanks I appreciate you!…I don’t usually use the small compressor to paint so I definitely should have had things set up better but I definitely will have something set up for next time…again I appreciate you checking out out the video
@@UndergroundPaintKing no problem man, your work is awesomeakese feel not so alone painting under my car port with harbor freight tools😄
I bought that gun about 2 year's ago to spray hydro dip activator, With my 10gallon husky. I couldn't believe the spray pattern and the fit/feel for the $$. Long story short, I turned this bad boy to my clear gun for my hydro dipped part's. One thing I noticed out the box was the plastic ring behind the air cap, only cheap thing on the gun. But I didn't get scared, SHARPE FINEX 3000 which is little a hundred dollars has the same similar plastic O ring! My man great work, only been here couple months subbed, but hooked! Uu, sprayway, phharway, lakeside ,gritts outta bama, jr outta tex, couple other's!! Got thatt content!
Bro for the money you wouldn’t expect this gun to be this nice! I appreciate you not only checking my channel out but also checking out and supporting my other comrades…thanks bro!
Couple months ago you talked about the spectrum HVLP, Harbor Frieght had a sale for 100 dollars I took your advice and bought it, tried it out clearing a front bumper the other day and it did a excellent job. Also took your tip about using microfiber clouth to wipe down base coat before spraying clear. Thanks so much for helping out with your vidios.
Nice!…I’m glad I could help out 💪🏾
That was crazy man! It should be noted that you are obviously a talented painter. I’m shocked how well that came out without a dryer, but I guess credit the drain drip tip. Your technique looked great!
Thanks I appreciate that and appreciate you checking out the video…I’ve always liked letting my clear air dry rather than forced dry just seems to allow the clear to flow out better in my opinion
Thanks again man, just got the summit gun with this exact compressor, all under 200 bucks!
Nice!…I hope the videos are helpful!
Very nice! You proved your point! One thought: in a future video, you could have the camera located away from you, to show how your arm/body moves as you apply the paint. Thanks again for a great video demonstration.
Thanks Super Bear I appreciate you checking out the video and I’ll definitely put a video together!
Good timing for me to find your video. I need to paint my boat trailer and I was thinking about getting one of those expensive Fuji turbine setups, and then I remembered the SPRAYIT SP-33000 I bought 7 or 8 years ago for painting guitars, people get good results painting cars with these guns. If you can get results like this on a huge Tahoe, this gun and my 26 gallon compressor can handle a bass boat trailer! Thanks!
You’re welcome and you’re right it’ll handle your boat trailer no problem!
Awesome man! Answered all my answers! Will be investing in a LVLP spray gun, a 10 gallon husky compressor for smaller jobs. Really appreciate it with all the great tips. Watched alot of videos on thei but yours got me to the right conclusion, cheers🇨🇦🍻
Glad the video helped Miguel💯 appreciate you watching from Canada !
For sure man🤘 thanks for the reply and helping us that are starting out💯
@@miguelbTGOD I hope the channel continues to help and good luck on your journey 💪🏾💯
@@UndergroundPaintKing thank you man! I will make sure to subscibe and follow, always nice to learn and spread knowlege🙌💎
@@miguelbTGOD you’re welcome and I appreciate you subscribing to the channel 🙏🏽
The exact video I needed! Was going to paint my truck with rattle cans, think I'm going to buy a 20+ gallon compressor and gun instead! Appreciate the video! Subbed
I think the 20 gallon and paint gun will be a good way to go for you…I appreciate you checking out the video and subscribing to the channel!
Awesome paint job. If i lived near you i would have you paint my truck. Nice video! Thanks.
Thanks Adam, I appreciate you checking out the video!
Amaizing my brother. It looks from factory new.
Thanks Rafael, I appreciate you checking out the work 🙏🏽💯
Great job. I especially like your style of production. Coherent without rambling on like a lot of videos. Thank you, I have been hunting used compressors with at least 10 cfm. The cost is to high for me. I am going to mimic your equipment to paint my pickup. I think the bed in one section, the feont in another. Best wishes to you!
@@aaronellinger2662 I appreciate you checking out the video and good luck to you on your pickup 💯💪🏾
That's very impressive. Good job.
Thanks Alonso I appreciate you checking out the video!
@@UndergroundPaintKing your welcome, it's a good video with good content. Keep doing what you're doing. Thank you too.
@@alonsonavarro2126 thanks I appreciate that!
Thank you my G!!! I have an 04 Denali I want to paint and this video answers everything I wanted to know... Peace and Blessings 🙌🏾 🙏🏾
You’re welcome and I’m glad the video was helpful 💯💪🏾
Just sprayed my first 2 Panels with the Spray It gun ,worked REALLY well.
Yessir that’s what I like to hear!!!
Yeah Bro, when I say My FIRST. I mean LITERALLY my first time spraying a vehicle.
And I have learned that the BETTER your Surface Prep the better your chances of getting a good result!!
@@trickster6831 prep is everything! You have to have a good foundation to work with
All of the guys that I have learned from are commenting here!!! 😉😉😉✌🏻✌🏻✌🏻
And YES, that includes You!! 🙏
Dude this thing is the truth! My compressor was refilling as I sprayed with it (Kobalt Quiet Tech 26 gal). Took a little adjusting between base, intercoat and clear, but it's pretty good! My only complaint is the tiny cup, but for the price it's fair!
Painting the rest of the car when we get another warm day!
Glad to hear you got great results like so many other people did!
@@UndergroundPaintKing thanks for putting out videos to give us the confidence to do so!
@@acevedohiram you’re welcome!
Great job , so informative, your help with understanding how to paint is very appropriated , thank you.
You’re welcome and I’m glad the video was helpful!
Awesome thanks...I'm doing an air dryer .with a 20 gallon...ty again brother
You’re welcome Gary!
Looks great, and the compressor did the job. I've got to get a new compressor to replace my 35 year old Craftsman 30gallon/5hp(B.S.) compressor I bought new way back in the late 80's. I've got a 2 car garage and for almost everything a 30 gallon does a great job but I'd like to paint my Chevelle sometime in the next few years so nice to know a 30 gallon will do the job without stepping up to a 60 gallon which would be kind of a pain to install/move and I don't really need it for anything.
Yeah Tom, if you’re not planning on doing a ton of work and you just have a project that you want to finish, then a small compressor setup is definitely the way to go in my opinion and saves you money. I appreciate you checking out the video!
Very impressive job! You went right for the big vehicle to show how to do it. Good tip on the compressor.
The big vehicle was the best way to prove it could be done so I had to do it…I appreciate you checking out the video!
Nice job UPK!!!!
@@leonbuckner8157 thanks I appreciate you checking it out bro!
New that little gun would knock it out of the park before I even pressed play. Nice to see you gave it a little more PSI on the clear.
It definitely knocked it out the park!
Hell yeah!! Wanting to paint my old mustang but compressor size was a big hurdle with my budget! Im sold! So that gun and compressor is a good setup! On my list. Thanks for the video, good shit!
You’re welcome Jerry, and this setup will definitely work for you!
Hey King I thank you so much for the outstanding and Great videos!!! I just bought the Spectrum HTE and now I will order this paint gun as well to paint my 07 Chevy Tahoe!!! Please keep up the great work and GOD BLESS YOU brother!!!
Thanks I really appreciate you for this comment it really helps to keep going and creating more content and I hope that the videos are helpful…God Bless You!!!