Yeah those cheats! It was a mustang and they took his mustang dang it!!!! From now on i am wearing a license plate on a chevy from now on that says a big : FU-ELLANOR
Nice job. The door hinges are easy and cheap to rebuild. When you have access that stage 1 & 2 rust, should treat with a rust converter before re-assembly.
I don't agree with cutting out the new rust free rocker panels from the new 1/4 panels. Take the extra time for the fresh metal in such a rust prone area.
on one hand it’s original sheet metal, on the other hand the new metal is high quality… tough choice, maybe not for this car, but if your car had solid original rockers I would do what they did
So ya tore off most of the cars skins, and installed new ones to do a fastback conversion. This by itself, is an extremely cool idea, but, why didn't you at least sandblast and repaint the remaining metal while it was exposed???
Because this car will never see the road. The starter non fastback was a rust bucket from head to toe. You would be better off to start with a more expensive rust free mustang because you will spend the money trying to resurrect that rust one and still have a rusty one.
Hey it is Allan Shepley from MUSTANG CENTRAL! It's great seeing you on camera again. I've been following you for years. Great job fellas! Loved this episode.
This channel is so much better than all the others. These guys just explain everything without shouting and emphasizing every single word with that weird bravado. ie, like Gunpowder and Gasoline..
I love seeing the demolition of a ‘67 rusty six cylinder ugly coupe mustang knowing it’s about to become an amazingly beautiful fastback car. I’m sure the rest of the build is going to be epic too.
Very cool episode. Quality work and quality video work and narration. ALSO, I'm actually shocked and impressed that you guys are promoting some great tools at the end. In the past, some of the stuff wasn't exciting, but all of your items this time are pretty useful and something I might consider buying.
All new metal over rusted untreated old metal. Floor pans trunk floor and extension all need replaced or repaired . No clean up or weld through primer used!!! Total wrong way to approach the project. Hurry up hack job!!!
I am 78-year-old Vietnam veteran that loves restoring the old Mustangs. I had the front fenders Vin numbers i removed from a 65 Mustang convertible that was rusted away. I got the title for the car too. With the vin numbers I built a brand new 65 convertible with vin numbers and title. I have a true 65 fastback body at the present time that will be up for sale this spring or summer 2022. Last but not least. Changing a coupe to fastback is trick but the car remains a coupe with vin and title. Under the front cowl below the windshield that is an aera that is rusted bad right now, I guaranteed. Not to correct it would be like putting perfume on a pig.
Some designer at ford made a clay model of a Mustang in 1963 or 1964 everybody who saw it thought it was amazing. Some guys thought it looked better than the Pinin Farina concepts they saw on display at the Detroit Motor Show. However the accountants thought that people who were about to buy a Falcon or a Fairlane would buy this instead. At this time Chrysler and GM were selling something called a "compact" or a "mid sized car". Ford thought that they only needed 2 cars to compete with those, so they did not need a 3rd car in that price range. Lee Iacocca believed that anybody who saw a mustang and it's price sticker would want one. Ford sold every one they could make, before their competitors created 5 other "pony cars".
Might as well have made the wheel tubs wider for bigger wheels and tires while you were doing all of the cutting and welding. Most people will probably put wider wheels and tires in the back of this when they buy it.
Exactly my thoughts as well I would have mini tubbed it. Edit: with a 4 link and a not to crazy cage and weld in real frame ties that I would make (not those junk ones everyone can buy) so it would be a full frame car.
I just watched a guy who has a 1967 Shelby 428kr on the guy with the mustache who interviews people and their car. And the hood was raised. It had a bunch of cool badge's.
It did look very doable I would want to do this if I had the money. As far as being a purest I would rather be cruising down the road in fastback looking cool. Notch backs are cool but fastbacks are killer.
@Robert Rary Sadly very unlikely the Vin and the plate where it would have the information have rusted off the people who had it before me wanted to turn it into an electric dragster but had no idea how to do it properly they ended up cutting anything off of the car that would give me proper identification it is just a shell which is the perfect opportunity to convert it to fastback
Yes versus buying a project Fastback. I'm not a Ford guy by any means but I do like the 67 through 68 Fastback Mustang especially if it was cloned to look like a Eleanor.
@@eric63377 eleanors are trash, they only have decent rear ends, the front looks like it has bug eyes and a crimson chin bumper that takes away from the coke bottle shape, notice how stock bumpers of 67 fastbacks body lines line up with the bottom sweep of the rear quarter, side exist is honestly really nice and thats coming from someone that doesnt dig side exist.
I have a 66 coupe that I want to convert to fastback . But can't find any videos showing how to do it. Is it pretty much same steps like your 67 video ? Thanks William
well they welded to a lot of rust... seems like they just wanted to get it done.. if you are removing panels at spot welds the best tool is a small belt sander with 36grit .... also look into a tool called a vacuum sand blaster they are a sandblaster and shop vac in one.. the tip of the blaster is in the center of the shop vac nozzle so when you blast all the dust is collected.. it is good for cleaning up parts you're going to weld to .. then you can paint them so you aren't trapping rust inside voids you can't get to after you weld
While it's that far apart it really should be media blasted and powder coated which I realize is usually more effort than most people want to put in and that's understandable because not everyone has that kind of money to throw at their projects...
When welding if you have a good ground the weld will burn the rest as long as you get a good pool going and honestly goes for almost all types of welding
I imagine the reason more coupes were made and sold was that females bought most of them and convertibles. Women loved the earlier 64-66 coupes. Men liked the fastback because of Shelby fastback. They looked hot! I had a 67 fastback 2+2 myself. The only drawback was the back seat headroom.
see this done with a willys too ,thats a lot of work but a fantastic result great job guys !!!!!!! all you have to do is everything else ,easy right good luck with all you do !!!
Bad idea to cut too much at a time on a unibody. Cut the floor out out while roof is off there isn't much holding the car together. The braces they had to weld in also get in the way of floor
This conversion really doesn't look that hard after watching you guys do it. I might have to do one in the future on my channel. I know the sheet metal is pricey but all the other fastback parts are very expensive and hard to find which would be my concern.
When Ford designed the 1967 (2nd generation) Mustang. There must have been a team of engineers sitting around a conference table. Somebody thought the rear seat and trunk were obviously too small. Henry Ford II said most men want a car that looks sporty, but they also want the car to have enough room for their wife and kids and all their luggage. Then someone else said the 289 V8 was adequate, (for a Falcon GT) but some guys would pay a lot more for an optional 351 V8. They only had to make the engine compartment a little bit larger.
Having almost 0 auto body (ive done a little bit of bondo and primer) I think I'm just gonna rip apart a car and replace the back half and hope it goes this smoothly.
Probably because its a sponsored video paid for by Year One and wanted to demonstrate how easy it actually is to convert a Coupe to a Fastback as long as you know how to use the proper tools. The additional details needed to do a proper build is outside the scope of the project and thus, wasn't filmed. Remember, this is made for a TV format where each episode of the project has to be around 20minutes long. If you actually wanted to learn how to do projects like this, then you best enroll into a body shop or collision class near you. Or.... you could just buy a brand new Dynacorn chassis for about $15-20k and not worry about converting a coupe into a fastback, just buy a brand new fastback chassis - then you can build the car of your dreams without having to worry about cleaning up any rust or worry about the chassis being tweaked
I feel like this is a mixed bag. On one hand you need a decent donor car that is anywhere between 5-8k, then you need all the sheet metal to convert it to fastback which is probably 3-4k. Then the labor, free if you do it yourself. You spend 8-12k. On the low side it seems like a good deal, but on the high side that is only a couple thousand less than a dynacorn with all new metal. Seems cool, just can get expensive really fast.
This just makes me want to do a top on my 2002 BMW Z3 M roadster to a Z3 M coupe. Love my roadster but she leaks when it rains where to top folds and replaced it many times over the years. But dream of a coupe
That's all well & good but I don't see any rust removal, rust prevention, or primer going on before any welding. How long will it be before rust holes appear? Not guality work!
The young guy looks like the guy at Pep Boys who changes oil. Also wears a uniform shirt with a name tag that reads "Kyler". Hahahahaha Except in reality he's actually a custom car fabber with genuine skills and most likely a HEFTY paycheck. Never judge a hillbilly by his coveralls
I totally agree I work for Goodyear as a master technician and I have a 1986 Monte Carlo SS that's deep in 8 second area in the quarter mile that I built when I was 15 years old.
Iam just blown away by the good quality work and how to get New reproduction parts here in Australia All you do is Just piss in the wind and go no with more problems
If only I was willing to spend the $40K it would take to do this conversion. I'm wondering why the car wasn't dipped or media blasted before starting on the sheet metal.
I might do this as my next project, when I am done with my 1967 coop that I have had since 1987. I will have to look for a 1967 coop. My Kids would love to help me do this.
Sourcing a decent rear window is gonna be fun. Actually- a lot of fastback interior pieces are gonna suck to find. Unless they reproduce them now 🤷🏼♂️
Whatever you do, don't say Eleanor!!!!
You know we were all thinking it
Yeah those cheats! It was a mustang and they took his mustang dang it!!!! From now on i am wearing a license plate on a chevy from now on that says a big : FU-ELLANOR
Yeah that old bag will come chase you down.
i still cant believe that happened. so frustrating
@@parthl what happened
WOW........and it only took 30 minutes. Great job.
Lmfao and a Jiffy🤣🤣.
I used to do this with my uncle and cousin. We did a few of them and I'll never forget those awesome moments
Nice job. The door hinges are easy and cheap to rebuild. When you have access that stage 1 & 2 rust, should treat with a rust converter before re-assembly.
I believe they did. Tommy mentioned it.
I don't agree with cutting out the new rust free rocker panels from the new 1/4 panels. Take the extra time for the fresh metal in such a rust prone area.
I agree. I'd use the entire new piece and remove the old stuff to help reduce the amount of rust that has accumulated between the older panels.
Amen
on one hand it’s original sheet metal, on the other hand the new metal is high quality… tough choice, maybe not for this car, but if your car had solid original rockers I would do what they did
This certainly was great to watch, learned alot. Thanks everyone
Believe me. My neighbor owned a 1967 Mustang, and his son owned a 1966. I have compared these 2 cars hundreds of times.
RIP joe. 😢
Thank you for all the help, wisdom, and entertainment through the years
So ya tore off most of the cars skins, and installed new ones to do a fastback conversion. This by itself, is an extremely cool idea, but, why didn't you at least sandblast and repaint the remaining metal while it was exposed???
Because this car will never see the road. The starter non fastback was a rust bucket from head to toe. You would be better off to start with a more expensive rust free mustang because you will spend the money trying to resurrect that rust one and still have a rusty one.
Because this car will never see the road.... they will probably sell it to some one... a victim.
It's an easy project to do so we got a mustang expert in the shop to help us.
Hey it is Allan Shepley from MUSTANG CENTRAL! It's great seeing you on camera again. I've been following you for years. Great job fellas! Loved this episode.
The coupes are nice looking too!
I have two and I am considering converting one to a fastback. I had a big block fastback when I was in high school in the 70's.
I agree. A fastback in to a coupe is OK , but a coupe in to a fast back is just too good to waste.
The A team is at it again another classic in the making.
Bravo Bravo.
Keepemcoming
I’ve got to admit I got a little nervous seeing that fastback sitting beside that coupe because I thought y’all were about to chop the roof off of it
That would have been sacrilegious!!
👨👨👦👦👨👨👧👦
This channel is so much better than all the others. These guys just explain everything without shouting and emphasizing every single word with that weird bravado. ie, like Gunpowder and Gasoline..
Love how this channel is so focussed.
Would have liked to see this car further worked on and finished out .
I love seeing the demolition of a ‘67 rusty six cylinder ugly coupe mustang knowing it’s about to become an amazingly beautiful fastback car. I’m sure the rest of the build is going to be epic too.
I agree keeping as much of the original parts as possible, you save so much time and headache if things doesent line up or fit.
Very cool episode. Quality work and quality video work and narration. ALSO, I'm actually shocked and impressed that you guys are promoting some great tools at the end. In the past, some of the stuff wasn't exciting, but all of your items this time are pretty useful and something I might consider buying.
It’s a national broadcasted Tv show, not just some UA-camrs with go pros.
As a retired 40 year tool and die maker this video shows where craftsmanship passes over to art. WOW what skill..... that was made to look so easy.
Simple build, you just have to cut eyertything behind the a pillar off and build a new car, its funny how easy it looks in this video^^
Haha no shit
I know where 3 fastbacks are setting right now
I wouldn't hack a car up that could be saved
@@underworld7148 i would love to fined a bear bones one,,,,,,,
@@bustersmith5569 there's a place in North Carolina off highway701 that has a. 3
There are a lot of tweakers around where I live too.
I love the subtle humor they have on their shows
@@alejandroherrera5271 it caught me off guard.
Blue collar tweakers?
I caught that too, if they were really tweakers there would be tons of bicycle parts lying around and trash everywhere.
please upload the whole series of this mustang build
I’m actually about to start a conversion, myself-and you’re right. But I don’t care, I’m building it for me to drive and enjoy, not to sell…
I like the coupes better. Just thought I'd put that out there. Remember a lot of the race only cars were coupes because they are lighter.
Hopefully this is not another case of them adding new metal without properly treating the rust after cutting all the old sheetmetal off
Right. Hopefully also an angle finder was used for level instead of a bubble level. And more than one reference point.
This car really looks like it should’ve gone to media blasting before they started
All new metal over rusted untreated old metal. Floor pans trunk floor and extension all need replaced or repaired . No clean up or weld through primer used!!! Total wrong way to approach the project. Hurry up hack job!!!
Spot who didn't watch the whole vid. They did actually mention what they did about treating the rust in the windscreen area.
I am 78-year-old Vietnam veteran that loves restoring the old Mustangs. I had the front fenders Vin numbers i removed from a 65 Mustang convertible that was rusted away. I got the title for the car too. With the vin numbers I built a brand new 65 convertible with vin numbers and title. I have a true 65 fastback body at the present time that will be up for sale this spring or summer 2022. Last but not least. Changing a coupe to fastback is trick but the car remains a coupe with vin and title. Under the front cowl below the windshield that is an aera that is rusted bad right now, I guaranteed. Not to correct it would be like putting perfume on a pig.
I know this guy isn't "Mater"....but he comes close with his voice!!
Some designer at ford made a clay model of a Mustang in 1963 or 1964 everybody who saw it thought it was amazing. Some guys thought it looked better than the Pinin Farina concepts they saw on display at the Detroit Motor Show. However the accountants thought that people who were about to buy a Falcon or a Fairlane would buy this instead. At this time Chrysler and GM were selling something called a "compact" or a "mid sized car". Ford thought that they only needed 2 cars to compete with those, so they did not need a 3rd car in that price range. Lee Iacocca believed that anybody who saw a mustang and it's price sticker would want one. Ford sold every one they could make, before their competitors created 5 other "pony cars".
I think y’all should check out dustless blasting
They could have taken advantage of the need to brace as an excuse to install subframe connectors to stiffen up the unibody.
They made that look ridiculously easy - cool video to see how that could be done tho!
I love watching professional metal sculptors at work.
A Shelby taillight panel would look really good. I always thought the t-bird lights looked cool.
I prefer the stock Mustang tail lights and trunk lid. Lol That’s why everything can be customized for each person’s particular taste. All is good... 👍
T Bird Sequential 👍🏻
Actually , a repro steel "California Special" tail-light panel would be the way to go (gives the 'Shelby' look in steel instead of fiberglass).
60's early 70's Cougar were pretty trick on those year of Mustang. With the synchronized turning signals
Yeah the ducktail deck lids look super odd against the three bar tail lights. I mean there’s a REASON Shelby changed the taillights 😂😂
Yep, the Pebble Beach Concours d'Elegance awaits.
7:46 at this point I seriously started to think that the car is closer to the trashyard then a real car. Awsome work creating from that a car again.
Might as well have made the wheel tubs wider for bigger wheels and tires while you were doing all of the cutting and welding. Most people will probably put wider wheels and tires in the back of this when they buy it.
Exactly my thoughts as well I would have mini tubbed it.
Edit: with a 4 link and a not to crazy cage and weld in real frame ties that I would make (not those junk ones everyone can buy) so it would be a full frame car.
on this episode of *UNLIMITED* *BUDGET* .... we throw money away like it *causes* *cancer* !
Throwing money in a rust hole when you don't take care of all the rest to start with
they make it look so easy :p
I just watched a guy who has a 1967 Shelby 428kr on the guy with the mustache who interviews people and their car. And the hood was raised. It had a bunch of cool badge's.
Oh you're talking about the guy with the glasses and the handlebar mustache from my classic car. Right LOL?
@@eric63377 Dennis Gage
Dennis always sounds Hammered 😂
Hmmm.... if this can be done with Mustangs, would be cool to do it with other marks, like A body Barracudas!
Great fitment on the aftermarket panels
You preserving maness in the country.
Happy Birthday Mustang 57 yrs
It did look very doable I would want to do this if I had the money. As far as being a purest I would rather be cruising down the road in fastback looking cool. Notch backs are cool but fastbacks are killer.
67 and 68 Mustang fastbacks are the best Mustangs Ford ever built
69
Nice to know I have a factory fb sitting in my barn. 🍻🤙
I am so glad to see you guys cover this this is exactly what I’m doing to my 67 converting it to fast back and it is so much fun
@Robert Rary Sadly very unlikely the Vin and the plate where it would have the information have rusted off the people who had it before me wanted to turn it into an electric dragster but had no idea how to do it properly they ended up cutting anything off of the car that would give me proper identification it is just a shell which is the perfect opportunity to convert it to fastback
I prefer the fastback over the value
Nice work, build list and retail pricing on parts used would really be interesting.
Yes versus buying a project Fastback. I'm not a Ford guy by any means but I do like the 67 through 68 Fastback Mustang especially if it was cloned to look like a Eleanor.
@@eric63377 eleanors are trash, they only have decent rear ends, the front looks like it has bug eyes and a crimson chin bumper that takes away from the coke bottle shape, notice how stock bumpers of 67 fastbacks body lines line up with the bottom sweep of the rear quarter, side exist is honestly really nice and thats coming from someone that doesnt dig side exist.
@@eric63377 Don’t use the “E” word on a Mustang unless you want those pricks to steal it from you...
In the description it looks like they got all the sheet metal from Year One.
I have a 66 coupe that I want to convert to fastback . But can't find any videos showing how to do it. Is it pretty much same steps like your 67 video ? Thanks William
well they welded to a lot of rust... seems like they just wanted to get it done.. if you are removing panels at spot welds the best tool is a small belt sander with 36grit .... also look into a tool called a vacuum sand blaster they are a sandblaster and shop vac in one.. the tip of the blaster is in the center of the shop vac nozzle so when you blast all the dust is collected.. it is good for cleaning up parts you're going to weld to .. then you can paint them so you aren't trapping rust inside voids you can't get to after you weld
Why don"t you clean all the rust off the areas before welding on new panels?
I thought the same thing
While it's that far apart it really should be media blasted and powder coated which I realize is usually more effort than most people want to put in and that's understandable because not everyone has that kind of money to throw at their projects...
Still like coupes better
When welding if you have a good ground the weld will burn the rest as long as you get a good pool going and honestly goes for almost all types of welding
@@jamespowell116 I don’t think being able to weld it is the issue so much as taking the rust off will prolong the life of your work
The American man has always built his car. Planes to.
I imagine the reason more coupes were made and sold was that females bought most of them and convertibles. Women loved the earlier 64-66 coupes. Men liked the fastback because of Shelby fastback. They looked hot! I had a 67 fastback 2+2 myself. The only drawback was the back seat headroom.
🤣🤣 lmfao your right lolz
that’s still a problem with mustangs
see this done with a willys too ,thats a lot of work but a fantastic result great job guys !!!!!!! all you have to do is everything else ,easy right good luck with all you do !!!
Great job today, lads. Though, I have to wonder why you didn't replace those rotten floors while you had the body off.
Bad idea to cut too much at a time on a unibody. Cut the floor out out while roof is off there isn't much holding the car together. The braces they had to weld in also get in the way of floor
Pryor to roof removal would have been a good time to drop in floor panels, perhaps they weren't as bad as they appeared. Sure looks good eh.
I like Coupe the best ,but also Fastback is beautiful.
This conversion really doesn't look that hard after watching you guys do it. I might have to do one in the future on my channel. I know the sheet metal is pricey but all the other fastback parts are very expensive and hard to find which would be my concern.
????? All your left with is tail lights and glass. I think you will be fine when you leave your safe space.
When Ford designed the 1967 (2nd generation) Mustang. There must have been a team of engineers sitting around a conference table. Somebody thought the rear seat and trunk were obviously too small. Henry Ford II said most men want a car that looks sporty, but they also want the car to have enough room for their wife and kids and all their luggage. Then someone else said the 289 V8 was adequate, (for a Falcon GT) but some guys would pay a lot more for an optional 351 V8. They only had to make the engine compartment a little bit larger.
love the plasma cutter
the tools make the job
1:32 You gave yourselves the perfect alibi. 👍
I’m a Chevy guy too but I do like the Mustang fastback
enjoyed watching this even though I will probably never do this!
Never knew a car with that much rust can be rebuilt. 🇮🇳 Fan..
Oh, absolutely. Better yet, if you want all-new metal, look up Dynacorn.
that is not a lot of rust. You need to see what the Mopar guys are dealing with.
You have to see some restorations from the U.K. . Even new cars have rust here
Come out to the rust belt, we're lucky if we get a good firewall to start from.
Amazing work guys ! South Australia 🇦🇺
Having almost 0 auto body (ive done a little bit of bondo and primer) I think I'm just gonna rip apart a car and replace the back half and hope it goes this smoothly.
This is my dream to buy a wrecked mustang coupe/ convertible 67 from auction and modified it to fastback
I now have hope of making me a fastback 347 turbo stroker Shelby Clone restomod.
While you're cutting everything up, mini-tubs would be the way to go!
Nice. I may have to consider doing a video series to show more details.
I think you should clean up the old parts of the sheet metal, so your car will last forever
Agree. Why it wasn't blasted or dipped to start with..
Probably because its a sponsored video paid for by Year One and wanted to demonstrate how easy it actually is to convert a Coupe to a Fastback as long as you know how to use the proper tools. The additional details needed to do a proper build is outside the scope of the project and thus, wasn't filmed. Remember, this is made for a TV format where each episode of the project has to be around 20minutes long.
If you actually wanted to learn how to do projects like this, then you best enroll into a body shop or collision class near you.
Or.... you could just buy a brand new Dynacorn chassis for about $15-20k and not worry about converting a coupe into a fastback, just buy a brand new fastback chassis - then you can build the car of your dreams without having to worry about cleaning up any rust or worry about the chassis being tweaked
@@rotor13 I agree with what you said, but you can still at least put some rust reformer product underneath, that is something than anyone can do.
I had a 70 coupe when I was younger and I always wished I could have converted it to a fast back.
Whats funny is in canada that coupe is mint. Called rustang up here for good reason.
I feel like this is a mixed bag. On one hand you need a decent donor car that is anywhere between 5-8k, then you need all the sheet metal to convert it to fastback which is probably 3-4k. Then the labor, free if you do it yourself. You spend 8-12k. On the low side it seems like a good deal, but on the high side that is only a couple thousand less than a dynacorn with all new metal. Seems cool, just can get expensive really fast.
Its crazy what you can buy for these nowadays. I had a 65 years ago that had a vinyl top that ruined the roof
I designed that tool 20 years ago. Turned the design into maco and snap on. They laughed said it would never work. No one would buy it.
" surgically removal " grabs hacksaw and plasma cutter 🤣
got to have some balls to attempt this, it's a big job
Welding the new parts onto the rusty base is the opposite of a good restoration. How long should the Mustang remain rust-free? For one rain?
My dad has a 67 fastback and coupe and we constantly have people stopping by to try to buy them lol
@Curi Osity the coupe has a 289 and the fastback has a 347 stroker with a cam
@Curi Osity oh nice! Mo power baby
ya just like everyone else who says "I had one just like it"
God it killed me to watch them cut up the coupe but end result looks amazing
This just makes me want to do a top on my 2002 BMW Z3 M roadster to a Z3 M coupe. Love my roadster but she leaks when it rains where to top folds and replaced it many times over the years. But dream of a coupe
Only $10,000+ in new metal, this is not cheap to do
... and then you need rubber, glas, trim, new interiour, paint, lights.... def not a cheap build
And then you still have a coupe VIN so no one will pay fastback money for it when you go to sell it.
On the next episode: turn any car into any other car, just cut it apart and build a new car!
I like the fact you took a Coupe that had a busted roof anyway. No regrets here
Loved this episode and ready to begin my project.
I'm a sucker for a 'stang restore!
That's all well & good but I don't see any rust removal, rust prevention, or primer going on before any welding. How long will it be before rust holes appear? Not guality work!
This is a demonstration. If you're to stupid to realize you need to do those things you shouldn't be building a car in the first place.
should have paid attention....didnt show it, but said it was done
The young guy looks like the guy at Pep Boys who changes oil. Also wears a uniform shirt with a name tag that reads "Kyler". Hahahahaha
Except in reality he's actually a custom car fabber with genuine skills and most likely a HEFTY paycheck. Never judge a hillbilly by his coveralls
I totally agree I work for Goodyear as a master technician and I have a 1986 Monte Carlo SS that's deep in 8 second area in the quarter mile that I built when I was 15 years old.
That was cool shit, man you guys do some bad ass work. You make it look too frickin easy
He said "weve got 2 of the top tweakers in the business" lol
Iam just blown away by the good quality work and how to get New reproduction parts here in Australia All you do is Just piss in the wind and go no with more problems
If only I was willing to spend the $40K it would take to do this conversion. I'm wondering why the car wasn't dipped or media blasted before starting on the sheet metal.
Guys calling an antique mustang a classic they don’t realize that a 2005 S197 is already a classic!
I like this build.. Simple if u get a smart welder
I might do this as my next project, when I am done with my 1967 coop that I have had since 1987. I will have to look for a 1967 coop. My Kids would love to help me do this.
They make it look easy
Great show guys !!!!!
Sourcing a decent rear window is gonna be fun. Actually- a lot of fastback interior pieces are gonna suck to find. Unless they reproduce them now 🤷🏼♂️
They reproduce E V E R Y T H I N G for these cars now