FJ Cruiser mods-installing console switches DIY

Поділитися
Вставка
  • Опубліковано 11 тра 2020
  • In this video I add another mod to my Toyota FJ Cruiser.
    The FJ Cruiser only has one USB port but there is space in the lower console to add more buttons and switches. I decided to add one USB port and then another switch for a LED light bar and rear lights.
    I'll show you how to dismantle the console step by step as well as how to wire up the switches.
    Please like and subscribe if you enjoy the vid and feel free to leave a comment.
    For more content please follow my other pages below:
    Facebook: Black Overland
    Instagram: black_overland
    Ciao
    Music: www.bensound.com
  • Авто та транспорт

КОМЕНТАРІ • 34

  • @treycranson
    @treycranson 7 місяців тому +3

    I find it interesting what they reversed for the right-hand drive vs left-hand drive. Switch panel and shifters reversed, but climate controls unchanged. Thanks for the video!

  • @mitchconnor1708
    @mitchconnor1708 3 роки тому +2

    Bonus for the Joy Division shirt :)

  • @sibco96
    @sibco96 3 роки тому +4

    Good video. I have some light buttons to install and this told me what I needed to know.
    Also, I'm in the US and it's so interesting to see how everything is reversed on the RHD models, even the shift gate and the button layout.

  • @zeekrees
    @zeekrees 4 роки тому +1

    Nice vid. cable through near-enough to a roof rack mount bolt that it can stay inside sealed area/under shroud and out of sight (would deffo sika-flex the hell out of it) then run it through roof rack (like internal bike cable routing) to exit near where you need it. Run 7 core trailer wire so you have multiple options later. Light bars can draw big amps so might need to combine a few of the 7 for the primary light.

  • @happygramper
    @happygramper 2 роки тому +1

    "Hand cream and tissue" comment was hilarious 😂

  • @MrJimmyReload
    @MrJimmyReload 3 роки тому +6

    The blank with wires. The factory Sub woofer.

  • @van_mod1
    @van_mod1 11 місяців тому

    Very helpful vid in understanding how to get to the dash switch wiring. Use a Scanstrut cable gland for roof penetrations. I'm replacing the OEM rack with a Sherpa Fuji and there is a perfect space next to the forward tower and behind the fairing for the gland. Will be practically invisible from view and waterproof.

    • @BlackOverland
      @BlackOverland  11 місяців тому +1

      Great thanks for the feedback, I’ve since sold the FJ and now have an 80 series but good advice for any other FJ owners. Thanks 🙏🏼

  • @johnlyssikatos3747
    @johnlyssikatos3747 2 роки тому +1

    A clean way to get roof rack lighting in the KC Lites wire channel, it is a rubber channel that adheres to your windshield along the A Pillar, bends in nicely.

    • @BlackOverland
      @BlackOverland  2 роки тому

      Nice idea that. I’m going to look into that. Thanks

  • @BryanRushing
    @BryanRushing 23 дні тому

    Great Video! What wire size are you using? Going to order my parts now so I have and ready to install when the garage isn't 120 degrees. Any cocnerns if you are plugged into the all sources at once drawing too much power?

  • @patrickganpath8945
    @patrickganpath8945 3 роки тому +2

    You found what's called a "loop" the previous owner was probably a printing press operator. They are used to examine what is called "register," basically a way to look closely to see if your printing press is aligning correctly and producing an acceptable product.

    • @BlackOverland
      @BlackOverland  3 роки тому

      Very interesting. Thank you for solving the mystery

  • @madeleine856
    @madeleine856 2 роки тому +1

    I had auto electrician do lights switches never had to pull car apart just removed blanks was ezy

  • @brianflint8036
    @brianflint8036 3 роки тому +1

    Joy Division Tee Shirt. Thumbs up.

  • @designtime3469
    @designtime3469 Рік тому +1

    It’s called a lube! And it’s for looking at negatives or 35mm slides.

    • @vin6930
      @vin6930 10 місяців тому

      Stuff evidence

  • @WobbleWobble1
    @WobbleWobble1 3 роки тому +3

    You didn’t have to remove all of that you could’ve gone in through the radio

  • @VaibFormers
    @VaibFormers 4 роки тому

    Where do you find there’s USB ports at?

    • @BlackOverland
      @BlackOverland  4 роки тому +2

      VaibFormers you can get them from 4x4 Direct

  • @vulisipunzi2658
    @vulisipunzi2658 3 роки тому +1

    You're South African👍🏾❤️😭😭

  • @jamesray3920
    @jamesray3920 3 роки тому +1

    Sorry to say removing your center console to get to your console switches was not necessary all you had to do was remove your 2 sides by music raido and unsnap panel around raido now you can see behind switch panel and reach in to access your wires you will need to unplug the plugs on panel to get hand in i find this much easier and faster to access the wiring for switch panel

    • @richiethesee
      @richiethesee 3 роки тому

      The magnifying glass is a thread counter, what the scales marks are for... to count threads per inch in textiles. . It’s in perfect focus when unfolded into a C shape, in contact on the bottom “widow” . It is also used by graphic artists to look at dot patterns etc. in offset lithography, and other art uses.... I have several, and one in my briefcase at all times.

    • @BlackOverland
      @BlackOverland  3 роки тому

      Awesome thanks Rich-mystery solved!

  • @jorgzamb
    @jorgzamb 4 роки тому

    did you find out what are those cables in the blank of the top row of switches? ua-cam.com/video/ulpqf1BRRW0/v-deo.html

    • @BlackOverland
      @BlackOverland  4 роки тому

      Jorge Zambrano no I never, any ideas?

    • @jorgzamb
      @jorgzamb 4 роки тому

      @@BlackOverland not yet :(

    • @edfromanchorage6514
      @edfromanchorage6514 3 роки тому +1

      Sub woofer

    • @dykepepsi
      @dykepepsi 2 роки тому +1

      @@edfromanchorage6514 i have a factory sub woofer switch in my 07 fj that says subwoofer and i can push it in for on out for off but i also have a blank with wires in it that is fixed in place and i have no idea what it does either. if that were the subwoofer hed be able to switch it on and off

    • @wesleyhoover6402
      @wesleyhoover6402 4 місяці тому

      Same.