SUPER SHARP DENT Repair | Paintless Dent Removal for a DEEP CREASE
Вставка
- Опубліковано 22 лют 2019
- Repairing a Super Sharp Deep Dent with Paintless Dent Removal on this New Chevy Malibu door bodyline.
*****
🔴 Subscribe To My Paintless Dent Removal Channel:
goo.gl/ZVlsrz
*****
------------------------------
✅ Check out my list of recommended PDR tools on Amazon goo.gl/vVrHxQ
-------------------------------
************
Some links may be affiliate links. You won't pay more for using them, but I may receive compensation for the referral.
If you found these videos and links helpful, then I appreciate it.
***********
▶ Using paintless dent removal to take out a super sharp and deep dent can be a very complex repair, even for an experienced professional PDR tech.
This door dent in the driver's door of this new 2016 Chevy Malibu was not only very deep but also was through the body line. Damage like this can severely stretch the metal causing the damage to extend out from the main sharp impact point.
When we use paintless dent repair to fix a dent like this we have to very slowly push out just a small amount of the center of the deepest part of the dent. Then we will use hammers and knockdowns to bring down the crowns and blend the metal back into the dented area.
This extreme dent repair can take several hours to achieve an excellent dent repair. Trying to remove this dent to quickly can cause more damage that will not be repairable with PDR because of overstretching the metal or by damaging the paint.
Steady continues heat from a heat gun is also used to make it easier to move the metal and to preserve the factory paint.
The final result for this sharp deep crease dent repair was completed with the highest excellent quality.
If you are in need of excellent door dent repair on your car, then contact me at the info below. ⤵
*****The Paintless Dent Repair videos on the Excel Dent Removal UA-cam channel are designed to share what high-quality paintless dent removal can produce when done by a qualified PDR technician.
These PDR videos are not for teaching or training purposes or for those looking for DIY methods of dent repair. If you want to attempt these repairs, then you do so at your own risk, whether personally or by additional damage to your car.*****
Excel Dent Removal
1550 91st Ave NE STE 303
Blaine, MN 55449
Phone: (763) 780-4000
Excel Dent Removal Website:
www.exceldentremoval.com
Google Map and Directions to Excel Dent Removal:
goo.gl/NVR6AZ
Excel Dent Removal's Google Business Site:
excel-dent-removal.business.s...
=================
Subscribe:
goo.gl/ZVlsrz
UA-cam Channel:
goo.gl/EimW1A
Google Page:
excel-dent-removal.business.s...
Facebook:
/ exceldentremoval
Twitter:
/ exceldentrepair
Excel Dent Removal Blog:
www.exceldentblog.com/
=============================
Watch this Super Sharp Dent Repair Video Here: • SUPER SHARP DENT Repai...
=============================
Super Sharp Dent Repair | Paintless Dent Removal for a Deep Crease - Авто та транспорт
Nice work Steve and nice video! Thanks for posting it.
+Dent Ding King Thanks!!
Yes great job always enjoy watching good videos from you guys you both are great Techs
Looks like an *EXCELLENT* repair for that sharp dent.
Thanks! Customer was happy with the repair.
It would be great if you could show the end result.
+Travis Bobhead Yes. I usually do. I did have much more video of this repair but I had problems with the audio and video files with this one.
In the beginning and end of the video, when I’m speaking, you can see the end result of the repair. Just doesn’t have a PDR light directly on it.
Easy job
You give me a sense of hope for my Car lol
Great video .
You did a great job .
There is a dent about that size on my Mercedes R129 driver side door and at the same location but there's no body edge line . I plan on fixing it when I have time .
Some other drivers don't have any respect for other people's property.
Thanks again for the great video.
Dents that are not in a body line can be easier to repair, but if it is still deep and stretched it can still be difficult to flatten out.
Great job Steve! 🏆
Thanks! This sharp dent proved to be difficult, but the results did come out great.
Excellent repair, very clean considering how deep it was!
Thanks! +John Intelisano Yes. It was a very deep crease. I had to take it slow to get it to look good.
Excellent video, I have a similar dent in my VW Tiguan it would be nice to know that it can be repaired without paint and filler. How do you get the tool on the inside of the skin of the door though?
For average door dings and dents we can gain access through the window opening with our PDR tools.
Other times it would require removing the inner panel.
Its possible to start hot glue close bodyline and after push? Or this is optimal?
Yes. Glue pulling can be used before, during, and after pushing the dent.
It will all depend on the metals movement and what method is best.
For a sharp dent like this one on the body line, using glue would not have worked and may have made pushing it out even harder. Since it would not have gotten the bottom of the dent out and would have just pulled up around it making it even deeper.
hi , i new to pdr i have a problem when im finising up my dents , your do not feel them but i can see small poke dents and Uneven area , im still practice on a front Hood , im not new to making damage cars but pdr is not big in denmark so hard to learn
+kouer It will just take time to be able to see where you are needing to push and to be consistent.
If you’re seeing push marks then maybe try a softer tip or not push as hard. Try bring up the dent slowly.
Finishing a dent with paintless dent repair is the hardest and most time consuming part of removing the damage.
Just keep practicing!!
I got a dent and it’s like it’s only in the paint because you can only see it and certain angles depending on the lighting but the metal still feels smooth
Sounds like you have a shallow door ding. Those type of dings are great for paintless dent removal.
How is optimal temperature C° metal for pdr repair?
+Štefan Martinusík I would say for average damage that the temperature to be around 75 degrees Fahrenheit/24 Celsius is best for pushing and glue pulling.
When heating the panel with a heat gun, I usually warm it to around 100-150 degrees Fahrenheit/38-65 Celsius.
Can we use glue pulling on the border of the door like this?
Glue pulling the edge of a door could be difficult. Sometimes since there is limited access behind the dent, glue pulling would have to be used.
We use some other tools to straighten an edge that is bent. You can see it in use in this video ➡️ ua-cam.com/video/hWXuHoPCa1w/v-deo.html
If you are talking about using glue pulling to pull out a sharp dent in a body line, then it is unlikely it will work.
This is because the metal is stretched and has to be brought up from the bottom. Glue tabs will have a hard time getting all the way to the bottom to lift it and it will stretch the metal to a point where it won’t be fixable.
Also, it is much more difficult to straighten a body line back out. It can be done with enough skill, practice and knowledge of how to do it but again, if it’s deep it will be a problem.
Nice.
Whats the name of that Heat Gun Holder???
The heat gun holders I use are made by Get a Grip. getagripnow.com
@@exceldentremoval THANKS!!!
What tool did you use down the window
+Jeff Johnson Most likely used a few different tools. All would be from A1 Tool. First was probably their short double bend tool. Either taped up or with a rubber cap for soft pushing first.
Then switched to other curved door tools. You can see them in this video here ➡️ ua-cam.com/video/fmMC7j35B7w/v-deo.html
What is the metal board for?
You must be referring to the metal window guard, that is in the door to protect the glass. A metal one is also used for the repair because the glass is laminated and the edges of the glass are very fragile.
About how much would a repair like this cost?
There are few factors that go into a complex repair like this.
Size, extreme depth, and the body line. The cost can range from $300-$400 average. This is with access through the window opening.
The cost could have been higher for this one if I chose to remove the glass to avoid breaking it.
Might need your help
Sure. Let me know what I can do.
Молодец!!! Супер результат!
Благодарю вас! Я ценю его.Thank You ! I appreciate it.
А тебе показали результат?
Вместо постановки ребра которое держало вмятину, полез ее вытягивать с повреждением лкп, 3.04 это не грязь.
@@lYuril да конечно тут не чистовсё
Привет видос конечно
Хороший
Юрий привет! Пииятно пообщатся!!
The final result was good ??
Yes, the result was excellent. You can see the door in the video. I just didn't have a closer image when it was done.
How much would it cost to repair a small dent like this?
Average cost would be from $200-$500.
Now this may be a “small dent” but many factors increase the difficulty of getting an excellent repair.
This dent was very sharp and the metal was stretched. Also being deep into the body line makes it difficult to get that line back out and straight.
For me and in my area I’d say this dent would run about $350-$425. Others may be more or less depending on their skill level and how much other work may be involved.
For this dent I was able and confident enough to do the repair from the window opening. Others may remove the inner panel and the glass to avoid cracking the door glass, which would add more labor time to the repair.
How many minute does it take ?
I’ve got over 20 years of doing PDR every day, so times can be different for others.
Average small dings and dents can take around 30-120 minutes. A sharp dent like this will take longer. Usually around 90-180 minutes.
For someone with less or no experience, it could take a few hours to a day or two to get good results.
@@exceldentremoval Thank you very much
you are very skilled. you are my idol
You didn’t show the end result
No extreme close up of the after, but you can see the door on the beginning and end of the video. That is the finished repair.
Boo no end results with the light and all angles???
Why is he whispering , can't hardly hear him