FLSUN Super Racer Review | Fast Delta 3D printer | Fully tested

Поділитися
Вставка
  • Опубліковано 16 січ 2025

КОМЕНТАРІ • 127

  • @stephenhumble7627
    @stephenhumble7627 Рік тому +8

    better review than many others - you actually measured the test cube most reviewers just look at it and have no idea why they bother printing it.
    for anyone doing technical work this is important well done.

    • @TheTechnologyMan
      @TheTechnologyMan  Рік тому +1

      Thanks! Yes I tend to print functional stuff so dimensions are important to me!

  • @bobwanmorgan9906
    @bobwanmorgan9906 2 роки тому +4

    Love to see your upgrades for the FLSun

    • @TheTechnologyMan
      @TheTechnologyMan  2 роки тому +1

      Great thanks for letting me know. Have you got the printer - have you done any upgrades yourself?

  • @canicule10
    @canicule10 2 роки тому +4

    Very high quality video, like always it was a pleasure to watch, thanks !

    • @TheTechnologyMan
      @TheTechnologyMan  2 роки тому +1

      Thank you canicule10 - glad you liked the video. Makes my day hearing feedback like that!

  • @lloydhigginbotham9127
    @lloydhigginbotham9127 2 роки тому +2

    Definitely interested in what upgrades you make!

    • @TheTechnologyMan
      @TheTechnologyMan  2 роки тому

      Should be coming next month with a look at the new speeder pad :).

    • @qozia1370
      @qozia1370 2 роки тому

      Me too

  • @qozia1370
    @qozia1370 2 роки тому +2

    Awesome review, in depth but very well structured and does not drag on

  • @DennisVris
    @DennisVris 2 роки тому +11

    Nice video! Just one note: You say you should heat for PLA (Nozzle 220 and Bed 60) when auto leveling. However, since the ABL probe is attached, the nozzle will burn into the ABL probe. Just heat the bed to 60, but leave the nozzle be.

    • @TheTechnologyMan
      @TheTechnologyMan  2 роки тому +1

      Thanks. Yes I have been watching out for that but it's far enough away to not cause any issues - and I've done it many times in testing. But to be safe you should probably just heat the bed, and then heat the nozzle for the Z offset.

    • @tjCooper88
      @tjCooper88 2 роки тому

      FYI mine hasn't burnt the abl sensor but results my vary I suppose.

  • @visioncorp5228
    @visioncorp5228 Рік тому +1

    Best review on UA-cam hands down

  • @yorkieinnz4648
    @yorkieinnz4648 2 роки тому

    Great review, thanks.
    Just bought one for my sons 21st birthday...hope he understands more of it than I do.
    Subscribed 👍

    • @TheTechnologyMan
      @TheTechnologyMan  2 роки тому

      Thanks for the support! I'm sure your son will love it!

  • @schogaia
    @schogaia 2 роки тому +1

    I like the super racer and haven't done any modifications other than switching to a capricorn bowden tube. I intend to upgrade the firmware and the extruder (OMG V2-S) but haven't found the time yet. Ok it's not the time I am reluctant because it works and I don't want to change a running system. But you're right the extruder is bad.
    I would be really interested in follow up videos on the upgrades you're about to make.
    I just discovered your channel and subscribed instantly - now I'm going to binge-watch your other videos 😁
    Keep up the great work, greetings from Germany

    • @TheTechnologyMan
      @TheTechnologyMan  2 роки тому +2

      Thank you schogaia! Thank you for the support it means a lot to me! And if enough people want a follow up video I'll make one!

  • @jasonwu2758
    @jasonwu2758 2 роки тому +10

    I've just ordered mine like an hour ago. Would love a follow up on recommended upgrades and the options available! Thanks for the profession look at this!
    Update: After 500+hrs printing mainly pla and petg and and it's been mostly painless. I've upgraded the extruder (Recommend you stick with an Bondtech BMG style extruder/I'm using Trianglelab DDB version off Aliexpress), bowden tube/couples, Energetic Textured/Smooth PEI sheet (Bed seems to have adhesion issues without glue after 500hrs), spool attachment upgrade I made on thiniverse "Flsun SR Spool Glider", Narrow Fan Ducts S on thingiverse (saw instant improvements even with stock fan on 3d Benchy). Still going strong, it's built quite well. Just with a pei bed and a quality extruder upgrade is all you really need on this unless dealing with specific filaments

    • @TheTechnologyMan
      @TheTechnologyMan  2 роки тому +9

      Glad you liked the video and thanks for the feedback - if I get enough requests I will do a follow up video.

    • @fenderfreak86
      @fenderfreak86 2 роки тому +3

      I second a follow up video

    • @TheBlkraven74
      @TheBlkraven74 2 роки тому

      @@fenderfreak86 I thirds that request. I just received mine over the weekend.

    • @mohankuru7760
      @mohankuru7760 2 роки тому

      Please do a upgrade video

    • @matthewjcroy
      @matthewjcroy Рік тому

      So I have and ender 3 I have loved dearly for about 2 years . I was looking into buying this printer do you have links to the upgrades you made to it ? I will probably want to make them immediately .

  • @a.n.j.16
    @a.n.j.16 Рік тому

    thank you for the very thorough review.

  • @MasterSwardsman
    @MasterSwardsman 2 роки тому

    Great video, very in depth and informative. On my way over to your channel to look for that follow-up video!

  • @MichelleGianni
    @MichelleGianni 2 роки тому

    Coming from the Anet A8 and Ender 3 Pro progression I just got this printer and I absolutely love it. Blows away the Ender 3 Pro by a long shot and rivals the Prusa MK3 I use at work.

    • @TheTechnologyMan
      @TheTechnologyMan  2 роки тому

      Yes definately a big step up from the Ender 3! Glad you're enjoying it 😊.

  • @Nomadman4life
    @Nomadman4life 2 роки тому

    Excellent video ! Very informative. Made me subscribe and like would like to see a follow up of upgrades when you have time. Thanks again 👍

    • @TheTechnologyMan
      @TheTechnologyMan  2 роки тому

      Thanks for the sub! Just waiting on the FLSUN Speeder Pad and hope to get that upgrade video out.

  • @pixxure1
    @pixxure1 2 роки тому

    Good review! Very informative

  • @VK3Dprint
    @VK3Dprint 2 роки тому

    Let's go! We need a video for upgrades! 🙋

    • @TheTechnologyMan
      @TheTechnologyMan  2 роки тому +1

      Thanks - hoping to do a follow up video next month - should have their speed pad upgrade too :).

  • @StevenDavisPhoto
    @StevenDavisPhoto 2 роки тому

    would love to see the followup video with the upgrades

  • @patrickhdsn
    @patrickhdsn 2 роки тому +1

    Would love a follow up, I'm considering picking one of these up.

  • @slushyvolcano46
    @slushyvolcano46 2 роки тому

    I was wondering if you could post the custom Cura profiles used in the video such as the FAST (GMR), FINE 0.2mm, FLEX 0.2mm, and PETG 0.2mm?

    • @TheTechnologyMan
      @TheTechnologyMan  2 роки тому

      I would use the profiles supplied with Cura now - the printer was not long out when I reviewed it.

    • @slushyvolcano46
      @slushyvolcano46 2 роки тому

      @@TheTechnologyMan Cura only has a fine and normal profile. Do you have any info or tips about the PETG and FLEX profiles?

    • @TheTechnologyMan
      @TheTechnologyMan  2 роки тому

      Try using the recommended temperatures for PETG and Flex and slowing things down a bit.

  • @skynyrdd1
    @skynyrdd1 2 роки тому +2

    Great video and very informative. Quite tempted by this printer as an upgrade to my Ender 3, I print a lot of RC plane parts and they can take hours so hoping this would cut back on that and save me some time. Did you test LW-PLA on this machine and if yes how was it?

    • @TheTechnologyMan
      @TheTechnologyMan  2 роки тому

      Thanks glad it helped! I've not tried LW-PLA - but can't imagine it'd would be an issue.

    • @dismaldunc
      @dismaldunc 2 роки тому +1

      Hi Stuart! just ended up here coz of you

    • @skynyrdd1
      @skynyrdd1 2 роки тому

      @@dismaldunc always happy to take responsibility 😂

  • @dennisgignac5103
    @dennisgignac5103 2 роки тому

    Very good presentation. Great Job !!!

  • @DemonPlasma
    @DemonPlasma 2 роки тому

    what a great review, thanks

  • @SimX9000
    @SimX9000 2 роки тому

    Excellent video and chaptered. I really like mine

    • @TheTechnologyMan
      @TheTechnologyMan  2 роки тому

      Glad you liked the video and I'm glad you're enjoying the printer!

  • @easy_3d
    @easy_3d 2 роки тому

    Have you upgraded the extruder? Have you used the magnetic print bed? And also can you make a video on octoprint? Can you provide the link for the flsun super racer upgrades video

    • @TheTechnologyMan
      @TheTechnologyMan  2 роки тому +1

      I'm going to try and make a short update video in the next month or 2.

  • @abpetri
    @abpetri 2 роки тому +1

    Very thoughtful video, thank you for sharing.
    Have you tried printing anything with ABS filament on the Flsun SR? Any advices? Upvote for follow up video with upgrades and such!

    • @TheTechnologyMan
      @TheTechnologyMan  2 роки тому +2

      Thanks! Yes - I've printed eSUN ABS+. Use some bed adhesive and for me 245C nozzle, 100C bed. It would be quite an easy printer to enclose if you're going to print a lot of ABS. I do hope to do a follow up video - thanks for the suggestion!

  • @rbtmods
    @rbtmods 2 роки тому

    Nice video, I'd like to see the hotend upgrade :)

  • @GladaTomten
    @GladaTomten Рік тому

    Very good and informative video.
    After you upgrade your SR, so it can print from USB.
    Can you still print or flash jour SR from the SD card?
    I bought my machine used, and can ONLY print from USB.
    Now I want to install Klipper on it, but can't get it to read the SD card.

    • @TheTechnologyMan
      @TheTechnologyMan  Рік тому +1

      It's a while since I did this - there's a convoluted procedure to switch between USB and SD card IIRC - check FLSUN's support site. If you can't find the instructions let me know and I'll try and find them.

  • @fa-ajn9881
    @fa-ajn9881 2 роки тому

    Throwing in my bid for another video documenting modifications etc!

  • @tjCooper88
    @tjCooper88 2 роки тому

    Hi thanks for this. I own two of these and the auto bed level is off. More so on one than the other. I don't understand what it's doing wrong. But there is always a spot higher or lower on the bed.
    I'd love to see a follow up to this with any upgrades you have done. As I'm considering changing the part cooling fan myself.
    I have a capricorn tube on mine, plus change the couplings for the extruder as it ends up messing up your ptfe tube after a while. I change to a bond tech extruder and pei sheet too.

    • @TheTechnologyMan
      @TheTechnologyMan  2 роки тому

      Looks like you've done some good upgrades already! Strange with your bed levelling - hope you get it sorted.

  • @SEGnosis
    @SEGnosis 2 роки тому

    At 7:00, white text on a white background is a bad idea

    • @TheTechnologyMan
      @TheTechnologyMan  2 роки тому

      Fair point - IIRC some of the background is black so had to make a decision! Black outline white would have been better but couldn't do that with the labels I was using.

  • @thediscoman2001
    @thediscoman2001 11 днів тому

    daft question u got a link to that ratchet clip

    • @TheTechnologyMan
      @TheTechnologyMan  8 днів тому

      Sorry I'm not sure - if I come across the STL I'll add to the video description.

  • @BeFree0_0
    @BeFree0_0 2 роки тому

    Hi grate video. Where would I be able to find the A Team Van print looks like a fun print

    • @TheTechnologyMan
      @TheTechnologyMan  2 роки тому

      Great thanks! It's the foldable van from Fab365 😊.

  • @3liJawad
    @3liJawad 2 роки тому

    Hello, really enjoyed your review. I am looking to get into the hobby of 3D printing and looking for my first printer. I have narrowed it down to the FLSUN Super Racer, Ender 3 S1 Pro and Ender 5 S1 (or if you have another recommendation around the same price range). It would be greatly appreciated if you could give your opinion on which one I should get as my first printer. Thanks

    • @TheTechnologyMan
      @TheTechnologyMan  2 роки тому

      If you don't need a large print volume perhaps the Prusa Mini too? FLSUN if you'll mainly print PLA.

  • @crazytrutas
    @crazytrutas 2 роки тому

    Greta video! I´m still on the fence. I would like to see the follow-up video.

    • @TheTechnologyMan
      @TheTechnologyMan  2 роки тому +1

      Glad the video helped - yes still hope to make a short follow up video when I get time!

    • @crazytrutas
      @crazytrutas 2 роки тому

      @@TheTechnologyMan Please do that. 👍🏻

  • @chrisshaw451
    @chrisshaw451 Рік тому

    No mention of getting all three belts to the same tension.

    • @TheTechnologyMan
      @TheTechnologyMan  Рік тому

      My belts were already tensioned correctly so wasn't an issue for me. This was a review not a troubleshooting video.

  • @juancarlos-arciniega
    @juancarlos-arciniega Рік тому

    I just received my first 3d printer and this was the one I liked since the first time I decided to buy me one and thank's to your review I feel confident that I have a great printer for the long run.. I'm not afraid of changing parts as I already bought an extruder , bi metal hot end, better fans, capricorn bowden tube, and even a chihuahua lol...... I just forgot to buy the tools to change all this lmao...... any recomendations on the L's wrenches or keys!? great review...

    • @TheTechnologyMan
      @TheTechnologyMan  Рік тому +1

      I like Wera tools but have some nice PB Swiss Allen keys too. Good luck with the upgrades!

  • @rmphotographyfilm7754
    @rmphotographyfilm7754 2 роки тому

    Is this a good printer for a first time user/ buyer

    • @TheTechnologyMan
      @TheTechnologyMan  2 роки тому

      If you're going to print PLA mainly and want fast prints it's a good option. If you're not in any rush and want to experiment with different filaments I'd probably for something different.

  • @gunlover7851
    @gunlover7851 2 роки тому

    For PLA, how would you compare this printer to the Ender 3 S1 pro with sonic pad for speed and quality?

    • @TheTechnologyMan
      @TheTechnologyMan  2 роки тому

      Pretty similar - but the FLSUN is probably still a little quicker - and I've not installed their Speeder Pad yet!

  • @drusso66
    @drusso66 2 роки тому

    Would you recommend this over the Ender 3 s1 pro

    • @TheTechnologyMan
      @TheTechnologyMan  2 роки тому +1

      I'm just reviewing the S1 Pro now but if you're printing PLA and impatient I'd go for the Flsun - it's so much quicker! The S1 Pro so far though produces very good prints, and can print a far wider range of materials.

    • @drusso66
      @drusso66 2 роки тому

      @@TheTechnologyMan Thanks for your advice, might wait for your review on the S1 Pro before I decide.
      I think I would prefer quality over speed and I also would be wanting to print with flexible filaments like TPU .

    • @TheTechnologyMan
      @TheTechnologyMan  2 роки тому +1

      I use the SR more than any other printer at the moment because it's so fast. And I have upgraded it which I'll cover in a video soon so it's not far off the S1 Pro. It does do Flex - just not anything too flexible. But out of the box the S1 Pro can print pretty much anything theoretically - but still working through my tests to confirm this.

    • @tjCooper88
      @tjCooper88 2 роки тому

      @@TheTechnologyMan I agree. I have a climber 7, three sovol sv01s, two srs, two qqs, anycubic predator (not currently working) and a hictop d3 hero. I ALWAYS use the SR if I can. Never mind the speed, it's just better quality overall as the bed is fixed.

    • @mohankuru7760
      @mohankuru7760 2 роки тому

      I have both of them, large pla models work like a charm on flsun, s1 pro for other filaments do a good job, I am planning to do a lgx lite ext and dragon hotend upgrade, for the cheap extruder you can do 2 things, one, a washer from a ptfe tube for the piece on the opening side wheel, two a thicker clip for the coupler downside, ultra narrow fans and just a thicker clip does magic.

  • @TheTechnologyMan
    @TheTechnologyMan  2 роки тому +6

    FLSUN Super Racer: geni.us/fZqn (Amazon affiliate link). Let me know if you want to see a follow up video with the upgrades I have planned. And if you have any suggestions please let me know!
    Timestamps:
    0:00 Intro
    0:39 What's in the box, assembly
    3:39 Automatic bed levelling, inc adjusting Z offset
    4:53 Loading filament
    5:51 Printer overview, Delta style printer, speed, size and weight
    6:48 Components, build volume, glass bed, touch screen
    7:32 External control via Octoprint or Pronterface, USB port and microSD card slot
    7:56 Printer performance. Updating firmware (new features)
    9:17 First test print
    9:34 Setup printer in Cura slicer
    10:04 Failed print, diagnostics,
    10:33 Clean nozzle and hotend
    10:58 Lower temperatures hotend - not all-metal
    11:08 Insert PTFE correctly into hotend
    11:26 Connect wirelessly via Octoprint to calibrate extruder
    11:36 3D Benchy PLA at high speed (41 minutes)
    12:10 3D Benchy PLA at high speed slowed down
    12:26 Super high speed 3DBenchy at 220mm/s test print
    12:44 Dimensional accuracy test print calibration cube
    12:55 Demanding long print - foldable A-Team van
    13:22 Release from glass bed when cool
    13:36 Vase prints (vase or spiral mode) at 150mm/s
    13:58 Removing more stubborn prints off glass bed
    14:08 Filament runout sensor test
    14:29 Print resume feature test (power loss)
    14:52 Printing PETG
    15:28 Custom PETG profile in Cura
    15:55 Test prints in PETG, warping
    16:23 Printing Flex (flexible filament), custom Cura profile, test print
    16:56 Heat up times, power use
    17:14 Heated bed variation in temperature
    17:23 Removal top cover to reveal 32-bit mainboard, silent stepper drivers, printer noise
    17:41 Listen to printer noise
    18:07 Conclusions

    • @stefanoa1756
      @stefanoa1756 2 роки тому

      A follow up video would be really appreciate! Thanks 🙏

  • @rubrikduck
    @rubrikduck 2 роки тому

    Hello, are there any other printers you would recommend more for printing PETG quickly, or could this be easily upgraded to do so?

    • @TheTechnologyMan
      @TheTechnologyMan  2 роки тому

      I'll be playing the SR more soon when I look at the Speeder Pad upgrade - so will do some more PETG printing.

  • @princessa4223
    @princessa4223 Рік тому

    What is the best 3d printer aside its price for big project.

    • @TheTechnologyMan
      @TheTechnologyMan  Рік тому

      Not sure what size you're after - but I haven't tested any really big printers sorry.

  • @MRyansanayi
    @MRyansanayi 2 роки тому

    pls someone tell me how to make flsun purge a skirt to the side before printing. i googled and the codes i found doesn't work in cura. I'm confused. i need help. i have qqs pro.

    • @TheTechnologyMan
      @TheTechnologyMan  2 роки тому

      You choose a skirt in Cura under support settings.

  • @3dcdp62
    @3dcdp62 2 роки тому

    What is de size of the filament?

  • @klavsvasilis
    @klavsvasilis 2 роки тому

    bought it a couple of days ago, arrived today- its all metal :) but got one clog in~3hours of use... im really unfamiliar with bowden... my first mod will be sherpa i gues...

    • @TheTechnologyMan
      @TheTechnologyMan  2 роки тому

      You mean it arrived with all metal hotend? Mine didn't I had to upgrade. If it is you need to reduce retraction settings otherwise you will get clogs - I use 2.5mm.

  • @Leahd_279
    @Leahd_279 Рік тому

    Hi, could anyone tell me what kind of nozzles i need for the flsun SR - I want to experiment with different sizes - I'm assuming I need the longer, M6 Volcano nozzles and the shorter ones won't work?

  • @dosso96
    @dosso96 2 роки тому

    sorry I've used isopropyl alcohol and the bed left some yellow substance on my microfiber cloth... and now it doesn't sick anymore, at least not as good as before

    • @TheTechnologyMan
      @TheTechnologyMan  2 роки тому

      Yes I found you do get some yellow residue after cleaning with IPA - but I haven't found any issues with prints sticking. I would try revelling and and re-adjusting Z-offset. Also are you using different a different filament?

  • @dguy-xk4fc
    @dguy-xk4fc 2 роки тому +1

    Is it me or is it kinda ridiculous that you have to screw open the whole thing to update some firmware and do some programming? I mean which average Joe is going to do that?

    • @TheTechnologyMan
      @TheTechnologyMan  2 роки тому

      Yes it is and I hope printer manufacturer's start to realise that these are no longer DIY machines - people just want them to work. You don't always have to upgrade the firmware but in this case the smaller Z-offset increments is probably worth it.

    • @dguy-xk4fc
      @dguy-xk4fc 2 роки тому

      @@TheTechnologyMan I agree. Well the funny thing is i was actually going to buy that SR. I made up my mind. Then i saw your video and that got me thinking.. am i looking forward to immediately having to tinker with it? Not Really. So i did not buy it.

    • @TheTechnologyMan
      @TheTechnologyMan  2 роки тому

      I wouldn't let it put you off - I show how it's done in the video. And you don't have to update the firmware. You could also check with FLSUN to see if you order now whether it would already have the newer firmware? I'm still using this printer over other printers I own just because it's twice as quick! Good luck with whatever you decide.

  • @kalashin1529
    @kalashin1529 2 роки тому

    Nice video, good review. But i need to say, nearly none of the the shown prints looked really good. Even for the speeds you show, the quality is poor in my opinion. I also got an FLsun SR and i like the printer. The hotend, and the Extruder are the weak points of the printer in my pov.
    Recommendation for update: Make this Printer work with Klipper! I think it will be a huge improvement! I didnt manage to get it to work with klipper at the moment....

    • @TheTechnologyMan
      @TheTechnologyMan  2 роки тому

      I find the quality pretty good - not much different to more expensive printers I have that print a lot slower. But if you need better qulaity you can slow down the printing and the results will look better. Most noticeable ringing as I mention in my review. I did put Klipper on but have gone back to stock firmware. Didn't like not having screen and didn't fancy having to buy / use another interface.

  • @robertlopez9912
    @robertlopez9912 2 роки тому

    Shit formatting the card sounds ridiculous in it of itself. Thanks to your very good review I will not be buying this one.

    • @TheTechnologyMan
      @TheTechnologyMan  2 роки тому

      Glad you liked the video - can't even remember what I said about formatting the card!

  • @shanemcglade8832
    @shanemcglade8832 2 роки тому

    Hi I am a big fan and I am having trouble with my flsun super racer do u have whatsapp or snapchat

    • @TheTechnologyMan
      @TheTechnologyMan  2 роки тому

      If it's a specific question you'd be better off asking FLSUN directly or on the Facebook forums.

    • @shanemcglade8832
      @shanemcglade8832 2 роки тому

      @@TheTechnologyMan I tried but do u have whatsapp or snapchat