Bai lasa-ma, chiar cel mai tare mecanic din UK? Baiatul se pricepe, lucreaza in niste conditii grele, toata stima, dar pana a fi cel mai bun mecanic din UK mai e mult pana departe !
@@valentinvali3307 Mai baietica, nu cu "hate", cu ceva mai multa minte ca tine. Sigur cu mult mai multa minte ca tine si cu enorm mai multa experienta, mai baietica.
I'm studying your video on clutch replace the clutch in my 2014 Fusion 1.6 EcoBoost ( Mondeo to you) and feel I can tackle the job. Thank for putting this video up . Wish your service was in the USA as you'd have a customer in a NY minute!
Been waiting for the mk3 focus video as my missus has one and she rides the clutch more than she rides me, so im going to show her this video of all the hard work involved so it might teach her to use the Handbrake. Thanks for the video, Top of the Class.
That looked alot more difficult than most Kevin ! There was alot to remove to get done But good on you mate grafter true and true as always Well done again Kevin great job mate ! I really enjoyed that one !!!👍💪🙏
I did this on my 2012 mazda 3 with the same 1.6 diesel engine a few months ago, not a fun job on a driveway haha. Never did a clutch before but your videos are really helpful, cheers.
I still don't envy you Kevin, still doing a great job even in this weather, always a branded clutch & i think LUK is o.e on Fords, keep up the great work & have a well deserved festive break
I think I am about to buy a 1.6 TCDi focus. I wish I could buy a triumph spitfire for 70 quid, like I did in 1971. Changing the clutch was so easy, the transmission tunnel was removeable, and all the bodywork forward of the windscreen hinged up out of the way. You would sit on a wheel whilst working on the engine. Doing a clutch change on the focus would nearly kill me, but I suppose it would make me stronger. You made it look easy Kevin, nice video, thank you.
G'day Kieth I've been watching you for awhile now and have subscribed, You have a marvellous work ethic you get under these cars in freezing conditions I really respect you, I find it somehow therapeutic watching you repair these cars and I couldn't believe how many cars need new clutches and they are late models, must be riding the clutch. Anyway look after yourself and if I ever get back to the old country I'd buy you a good pint, kind regards John
John I’d gladly sit down and figure out how to put the world right over a few pints., or the whole Keg .. One bolt at a time. ., 🍻😁.. Thankyou for the feedback.. much appreciated
@@WMCS thanks for getting back to me we love it over there we've been over there two times and although I was born and raised in Australia I just loved the UK I felt right at home having a couple of lovely Bass Ale in the Swan in Krewcern and it was bloody hot, one thing I would love to do is have Christmas there instead of having a bloody hot one over hear. Anyway take care kind regards John
Top work fella, i would be nervous attempting that in a garage where i could walk away and return, nevermind on a driveway with night approaching, great job.
je regarde vos vidéos de mécanique mais je comprend pas pourquoi vous coupé des moment ou justement ont aurrais besoin de savoir comment enboiter une transmission sur certain model,c est une trés bonne chaine
That bolt is something else. There was some behind the scene magic happening ✨🍻🍻😁.,, I think the Errrhem fries should stick to YSL and Gucci bag designs 🍋🍻✨ leave cars to ZE Germans.
cheers nice job great video I'm doing my clutch soon similar car just need to get some brake cleaner to clean the clutch plate and bell housing excellent video especially the part about bleeding the clutch don't for get to grease the crank shaft spline did you put grease on bell housing bolts I have not seen anyone do that before why
That ain`t your first clutch job exacuted like a operation, Great stuff to watch. I have oil coming from my bell housing I only drips out after a drive and when its parked up I can see a drip or two, I think its a seal from the engine dripping it to where the fly wheel is, so I guess if i do the seal i might as well replace the clutch, Would this be the same procedure for a ford focus sport TDCI 1.6 2011
well that's another one done mate, good job you didn't have your best white shirt on for that, my, that was a dirty motor ... and all those bits-n-bobs to come off just to get to where you can see the job, maybe one day you'll be asked to do a Viva as a Christmas present. :)
I don’t know why ford has gone to the dark side ‘Peugeot’ all the typical issues you might expect from that engine. Ie constant oil leak. Dodgy wiring it’s all there ., ✨🍻🍻😁
Hey Kevin, Great video thank you. Question: Do you know if these cars can be changed from Euro 5 - Euro 6 emission standard by retrofitting diesel SCR ? Adding a Add blue tank & pump ? I am hoping someone has done this successfully
Salut, encore du super boulot pouce bleu, pour les fêtes de fin d'année va tu nous faire une vidéo bêtisier des moment couper au montage?.sorry I speak very bad English
You are class mate make it look easy. What do you call those yellow caps you use to stop the clutch fluid leaking or where can I find them I cant find them anywhere !! Respect mate
@@WMCS Thanks for the reply Kevin! I'll get myself one. I think your vids are awesome btw. Will definitely give me the confidence to replace my clutch when it fails haha
It’s so comfortable., it’s got elastic at all the right places. So it’s snug but not tight. The material is like some sort of canvas. No wind gets through. It’s Russian military uniform. There’s different level. This one is a GORKA 4 Bars.
I’d have have to say a Citroen C5.,, from suspension arm all the way through and through .,, it’s like walking through the valley of the shadow of death and god turned round and say you’re on your own on this one son✨🍻🍻😁😁😂
Buy a kit and you'll get the dual mass flywheel, slave cylinder , etc. If you fancy it you can change driveshaft seals too. One of mine leaked after and on a car that's done a few miles and years it can be pot luck if things seal the same once they go back.
Hi there what is the gearbox fill procedure on this gearbox, i swapped a driveshaft and lost a bit of oil on the mrs car and cannot find any details to refill as im not 100% on which gearbox it is, but it looks identical to the box in this video, the only sticker i can see on the mrs gearbox is AV6R 7002 KG. Thanks in advance
Ok cool, im sure i read somewhere that once it starts overflowing you are meant to stop filling and then take 500ml back out with a syringe or is that not the case ? Thanks again
Love a good clutch replacement video - especially when it's on my model of car. Great photography too. Congrats on a top-notch tutorial. 👌😃
The best mechanic in UK ! Thanks for sharing ! Respect man ! Have a good day !
Bai lasa-ma, chiar cel mai tare mecanic din UK? Baiatul se pricepe, lucreaza in niste conditii grele, toata stima, dar pana a fi cel mai bun mecanic din UK mai e mult pana departe !
Danut Ababei daca nu un roman cu hate atunci cine😂😂
@@valentinvali3307 Mai baietica, nu cu "hate", cu ceva mai multa minte ca tine. Sigur cu mult mai multa minte ca tine si cu enorm mai multa experienta, mai baietica.
@@danutababei9922 lucrez la servis;)
@@valentinvali3307 poate la service
I'm studying your video on clutch replace the clutch in my 2014 Fusion 1.6 EcoBoost ( Mondeo to you) and feel I can tackle the job. Thank for putting this video up . Wish your service was in the USA as you'd have a customer in a NY minute!
Been waiting for the mk3 focus video as my missus has one and she rides the clutch more than she rides me, so im going to show her this video of all the hard work involved so it might teach her to use the Handbrake. Thanks for the video, Top of the Class.
😆✨🍻🍻
Love how you just let the transmission drop onto you, respect.
That looked alot more difficult than most Kevin ! There was alot to remove to get done
But good on you mate grafter true and true as always
Well done again Kevin great job mate ! I really enjoyed that one !!!👍💪🙏
I did this on my 2012 mazda 3 with the same 1.6 diesel engine a few months ago, not a fun job on a driveway haha. Never did a clutch before but your videos are really helpful, cheers.
Hey Ronann.,, glad to hear the video came through for you and you managed the repair alright ✨🍻🍻🍻🍻
I still don't envy you Kevin, still doing a great job even in this weather, always a branded clutch & i think LUK is o.e on Fords, keep up the great work & have a well deserved festive break
I think I am about to buy a 1.6 TCDi focus.
I wish I could buy a triumph spitfire for 70 quid, like I did in 1971. Changing the clutch was so easy, the transmission tunnel was removeable, and all the bodywork forward of the windscreen hinged up out of the way. You would sit on a wheel whilst working on the engine.
Doing a clutch change on the focus would nearly kill me, but I suppose it would make me stronger.
You made it look easy Kevin, nice video, thank you.
Total respect for you mate, very knowledgable watching you do these jobs. keep warm...
Thanks for the support ✨🍻🍻🍻.,, really appreciate it
@@WMCS Imagine the days when you didnt have an impact wrench ......
G'day Kieth I've been watching you for awhile now and have subscribed, You have a marvellous work ethic you get under these cars in freezing conditions I really respect you, I find it somehow therapeutic watching you repair these cars and I couldn't believe how many cars need new clutches and they are late models, must be riding the clutch. Anyway look after yourself and if I ever get back to the old country I'd buy you a good pint, kind regards John
John I’d gladly sit down and figure out how to put the world right over a few pints., or the whole Keg ..
One bolt at a time. ., 🍻😁.. Thankyou for the feedback.. much appreciated
@@WMCS thanks for getting back to me we love it over there we've been over there two times and although I was born and raised in Australia I just loved the UK I felt right at home having a couple of lovely Bass Ale in the Swan in Krewcern and it was bloody hot, one thing I would love to do is have Christmas there instead of having a bloody hot one over hear. Anyway take care kind regards John
You are a professional technician, I wish you luck.)
I was memorized has soon has I started watching the video. Your work and your videos wow just awesome!
Top work fella, i would be nervous attempting that in a garage where i could walk away and return, nevermind on a driveway with night approaching, great job.
Well done man, you are a craftsman, greetings from Romania !!!
This is the best/most helpful video I’ve seen in a long time! Good work, thank you!!
انت اروع ميكانيكي اتابعه على يوتيوب اتمنى ان اكون خبير سيارات
Cool. There will be plenty to watch in the evening.:) Thanks.
✨🍻🍻
je regarde vos vidéos de mécanique mais je comprend pas pourquoi vous coupé des moment ou justement ont aurrais besoin de savoir comment enboiter une transmission sur certain model,c est une trés bonne chaine
Great job. A bit more involved than my old 1.8 tc Morris Marina.
Ain’t it just .,, ✨🍻😁
Wow! Your the man!! 👍👍
Hi kevin, you earned your beer tokens on that one buddy 👌👍👍
Max it was a bit of a squeeze getting that bolt out from behind the Cat converter. Apart from that not too bad of a repair ✨✨🍻🍻
@@WMCS french motor 😂🤦♂️
Good job, video is very helpfull, change clutch myself.
Greatings from Germany👍
🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥the best of the best. An Artist
Thanks for sharing this video, the gearbox and clutch are very simular to my car v50, but I’m waiting for the video with v50 d2 😉. Great job👍
Have a look on the channel I’m sure there’s one there already ✨✨🍻
Great job, congratulations for the video! may I ask you what product do you use to clean and degrease the mechanical parts?
Great job, great video👍
Defiantly the best!
Excellent video, very helpful. What LUK Clutch kit did you use? Was the new flywheel single mass or dual mass? Which would you recommend to fit?
13:25 the pain in the a.. bolt 🔩
Nice work Kevin, Teach those French engines a lesson
That bolt is something else. There was some behind the scene magic happening ✨🍻🍻😁.,, I think the Errrhem fries should stick to YSL and Gucci bag designs 🍋🍻✨ leave cars to ZE Germans.
@@WMCS 😂 😂 Have an idea what that would be. Cheers 🥂
Hell of a place to put the upper transmission support bracket bolt.. I'm guessing they figure you only do a clutch every 3-5 years...
Since ford has gone French. (With all respect I say this ). It’s a little bit over complicated for no reason.
nice, i like the gorka suit mate
Super thanks for all video,you help me to prepare to change clutch fiat stilo
Great effort making this video made 👏🏼 I have a stiff 1st gear on my focus, do you know what might be the cause by any chance?
Sei un grande!!!👍👍
Excellente vidéo de l embrayage ford focus c possible avoir une vidéo de la distribution ford focus 2015
Focus❤❤❤
40:12 why dont you put a sealing compound ?
Fantastic video thanks for sharing Kevin,, what make are the long reach ratchet spanner’s @ 9:50 in the video??
www.ebay.co.uk/itm/151959026286
They’re awesome they are these spanners. Can crack any hidden nut/bolts as it’s got a 1mm ratchet turn. So pretty much no free play
How long does it roughly take to change it and what do you charge for labour
Whats that magic cleaning solution, did a great job.
cheers nice job great video I'm doing my clutch soon similar car just need to get some brake cleaner to clean the clutch plate and bell housing excellent video especially the part about bleeding the clutch don't for get to grease the crank shaft spline did you put grease on bell housing bolts I have not seen anyone do that before why
Great video but where did all of the clutch fluid go, alot seemed to be used to fill it, but the pipe was plugged on removal and lost very little.
Was probably still in the slave cylinder.
good effort! Fooking hardcore
🍺🍻✨😁💫
That ain`t your first clutch job exacuted like a operation, Great stuff to watch.
I have oil coming from my bell housing I only drips out after a drive and when its parked up I can see a drip or two, I think its a seal from the engine dripping it to where the fly wheel is, so I guess if i do the seal i might as well replace the clutch,
Would this be the same procedure for a ford focus sport TDCI 1.6 2011
exellent job
well that's another one done mate, good job you didn't have your best white shirt on for that, my, that was a dirty motor ... and all those bits-n-bobs to come off just to get to where you can see the job, maybe one day you'll be asked to do a Viva as a Christmas present. :)
I don’t know why ford has gone to the dark side ‘Peugeot’
all the typical issues you might expect from that engine. Ie constant oil leak. Dodgy wiring it’s all there ., ✨🍻🍻😁
I got ford mk3 2012 diesel when put first gear take off making noise .wish never got ford now
Another great job and video, what area are you based my friend ?
Great video. What did you have for tea that night?
Kevin eres un chingón, saludos de México.
Hey Kevin,
Great video thank you.
Question:
Do you know if these cars can be changed from Euro 5 - Euro 6 emission standard by retrofitting diesel SCR ?
Adding a Add blue tank & pump ?
I am hoping someone has done this successfully
Hola amigos me gusta tu video un salut de madrid
Bonjour excellente vidéo travail protre et soigné pouvez vous faire une vidéo sur la distribution de la Ford focus 3😉👍👏
If you subscribe it’s already on the channel.
what is the oil on 1:07:14 ?
What's better single mass flywheel or duel mass and when are u coming too Ireland mate need my focus clutch and flywheel done
Impressed!
RESPECT.
✨🍺🍻✨
Jakim momentem dokręcasz tarcze sprzęgła?
Which is the better brand? LUK or Sachs?
1.6 ecoboost. Thanks!
Great video fella, always one to watch
Thanks for the continued support Jack ✨🍻🍻🍻
@@WMCS no worries mate great video again 👌
Salut, encore du super boulot pouce bleu, pour les fêtes de fin d'année va tu nous faire une vidéo bêtisier des moment couper au montage?.sorry I speak very bad English
I will ✨🍻🍻😁
You are class mate make it look easy. What do you call those yellow caps you use to stop the clutch fluid leaking or where can I find them I cant find them anywhere !! Respect mate
Hey Stuart. I collect them from the new slave cylinders I purchase. They are some sort of dust cap.,
@@WMCS thanks . Your videos are outstanding mate deserves more credit !
Hi! I have ford focus 3 2011 hatchback 1.6tdci 6 speed manual. How much oil going in manual transmission. Please. I want to change oil on my car
How much would a garage charge to do this this mine might need doing soon?thanks
Hi mate do you cover the Cumbria area ?
What gloves you use. Don’t think ive ever seen the split.
Awesome video Kevin! What make wobble extension and extensions do you use?
Hey ..✨🍻🍻 it’s wobble is MAC tools and all extensions are impact ones from sealey pro.
@@WMCS Thanks for the reply Kevin! I'll get myself one. I think your vids are awesome btw. Will definitely give me the confidence to replace my clutch when it fails haha
excelente.... saludos desde españa
What work ovies have you got on? Look decent!
Check the tools video on the channel.
I had clunking noises when changing gears mainly 2nd and 3rd. Had clutch and flywheel changed but still have clunking noises any idea?
Do you think this would be the same as a 2016 1.5 TDCI max??
Question, what gear is that you're wearing? looks comfy and does the job
It’s so comfortable., it’s got elastic at all the right places. So it’s snug but not tight. The material is like some sort of canvas. No wind gets through.
It’s Russian military uniform. There’s different level. This one is a
GORKA 4 Bars.
O my got that is a lot of work.
✨🍻🎉🎄
Excellent ! Where are you based ?
Where do you get your overalls mate
Amazing, thanks for sharing. How many miles usually do you a clutch change like that?
About 80miles travel distance roughly.
Second comment 🙌 nice work buddy, cold this week don't envy you
It is getting a bit fresh out there ., 🍻🍻✨😁
@@WMCS certainly is, just bought some new impact universals sockets form grey pneumatic. You ought to give them a look mate
Have you got a link for it.
gb-jbtools.glopalstore.com/grey-pneumatic-1313um-1-2-drive-13-pc-standard-length-metric-univ-set/?gclid=CjwKCAiA7939BRBMEiwA-hX5JxhLPfBQDSo1aEm5Ohi9qQ-ihectrlXOZ4ns7apRUCtGx7n-ySbwMBoCGZIQAvD_BwE
Link posted mate, honestly grey pneumatic impact stuff is fantastic and a decent price
nice video... assume you torqued up and not show in video? 🙂 mine is whining on acceleration, tried gearbox oil change, not much difference 😒
There’s a well known issue with these gearboxes. Just a heads up.
hello, I've been following you for a long time, I like what you're doing, can you change the 4 b8 2.0 tdi clutch audi? please
what product used when you washed the gearbox ?? and thanx
It’s brake cleaner
Hi,do i need a new flywheel when i change the gearbox or no?
Bonjour excellente vidéo je peux avoir une vidéo sur la distribution d une ford focus 3 merci 😉
Nice job
Do you ever come to Manchester?
A little bit outside my coverage area .,,
Me podrías decir que líquido es el que utilizas para limpiar todo? Desengrasa muy bien y se evapora muy rápido .
Gracias!!
Brake cleaner.
@@WMCS
Thank you very much for answering, I am a follower of yours from Spain, you are a great mechanic!
How long did take do full job?
For this focus about 3hours. Fairly simple repair.
Спасибо за видео. А что за средство , что все им моешь ? А сколько в реальности по времени занимает замена ?
Which torx is the flywheel bolt?
what is that cleaner you are using kev
Hi David. It’s brake cleaner. But any solvent works just as good.
What car or van Kevin has been the most difficult ?
I’d have have to say a Citroen C5.,,
from suspension arm all the way through and through .,,
it’s like walking through the valley of the shadow of death and god turned round and say you’re on your own on this one son✨🍻🍻😁😁😂
Thanks Kev .I had a Citreon XM loved it but to fix an oil leak under the rear suspension would have been a nightmare at the time .
@@WMCS you have this video from C5 ?
Where is the drain pipe air conditioning ford transit connect panel van 2012 thanks
How much should you tighten the bolts on the dmf?
👍 cool !
Bizarre qu'il n'y ait pas eu de joint Spy ou bague d'étanchéité à remplacer vu les fuites à proximité de la boîte à vitesses 🧐
Que marca es la pistola de impacto que utilizas
✨✨🍻🍻
Pero no me as dicho la marca de la pistola de impacto
Milwaukee
Is it just a clutch on a 2012 Ford focus or does anything else need doing
Buy a kit and you'll get the dual mass flywheel, slave cylinder , etc. If you fancy it you can change driveshaft seals too. One of mine leaked after and on a car that's done a few miles and years it can be pot luck if things seal the same once they go back.
Can you reuse the flywheel bolts?
Yes you can but it’s advisable to use thread lock. Locktite
How much oil goes into the transmission?
About 2.8L
Hi there what is the gearbox fill procedure on this gearbox, i swapped a driveshaft and lost a bit of oil on the mrs car and cannot find any details to refill as im not 100% on which gearbox it is, but it looks identical to the box in this video, the only sticker i can see on the mrs gearbox is AV6R 7002 KG. Thanks in advance
Fill through the level plug till it overflows
Ok cool, im sure i read somewhere that once it starts overflowing you are meant to stop filling and then take 500ml back out with a syringe or is that not the case ?
Thanks again
why do you put red rubber grease on the threaded holes? Can you put another grease on the threaded holes?
Rubber grease doesn’t disintegrate and stops metal oxidisation.
Whats in the pump? Alcol?
Solvent