Hi, I was inspired by your video and wanna try to make motorized 1/18 stuka too. May I ask you for help with information about how you disassemble the model and remove the prop to install the motor, where you install the battery and if it is possible to change it. Will be grateful for any information
Hi Thanks for the comment and view. I will try my best to answer The battery is removed via the aft sliding canopy. I had to cut some of the rear cockpit section away buy you can see it from the outside If you look over the left hand side of the model there are what appear to be small round plastic caps about 8mm across. Remove these (I drilled them out) then remove the screws underneath and the model should come apart. I mounted the motor using the two threaded holes on the front of the motor housing.
Nice one ben.👍👍👍
Thanks 👍
Another good one! Can you show the build process and parts you used for these conversions?
Probably used motors, and stuff! fan of the channel by the way!
Hi, I was inspired by your video and wanna try to make motorized 1/18 stuka too. May I ask you for help with information about how you disassemble the model and remove the prop to install the motor, where you install the battery and if it is possible to change it. Will be grateful for any information
Hi Thanks for the comment and view. I will try my best to answer
The battery is removed via the aft sliding canopy. I had to cut some of the rear cockpit section away buy you can see it from the outside
If you look over the left hand side of the model there are what appear to be small round plastic caps about 8mm across. Remove these (I drilled them out) then remove the screws underneath and the model should come apart.
I mounted the motor using the two threaded holes on the front of the motor housing.