*EASIEST WAY* Putting Spring Back In PS4 Controller
Вставка
- Опубліковано 5 жов 2024
- Once you take apart a ps4 controller, sometimes these trigger springs fall out, if youre lucky enough to find them after they come out, putting back in is a simple process. Link to my video on how to take apart a ps4 controller • *EASIEST WAY* How To R...
Hope this video is helpful, let me know if you have any questions in the comments - Ігри
IVE SEARCHED FOR AN HOUR FOR THE TYPE OF CONTROLLEER I HAD THANK YOU SO MUCH
Frost Ware you know what model the controller is? I’m trying to order springs
I believe it is a Model CUH-ZCT1U spring, if not then just look at amazon and pray to find the ones that look correct
I have the blackops 3 edition and it seems that its not 1st or second generation ffs
Who else spent their day crawling around on the floor searching for springs?
Me
Bro it's just if you have a second controller that you dont use like mine I will unscrew the spring out
Hahahah
@@pronominal6188 i get your pain
i have a few ps3 controllers, do they use the same spring as the ps4 does?
Thanks for this I’ll try it soon. That stupid spring has stressed me out lol
Same bro XD
À5TT
Cheers buddy you're a life saver plus the music calmed me down and saved a lot of lives today.
He literally saved my little brothers life today, and for that I will forever be thankful.
Honestly tho saved me from punching my controller more
🤣😂
Here's a hint: get a piece of thread and thread it through the spring like it's a needle. Then tie the thread together into a large, loose loop. That way, when the spring goes flying off into the abyss, you'll be able to find it because it has a thread on it. Once you get it into the right place, just cut the loop and pull the thread off. Also, tweezer pliers were a very big help.
Out here thinking in 2121, cheers for the help
Both of my springs disappeared into thin air 💔
Ok you an Angel right 😃? Thank you
@@sultanhalawani9895oof. Same here. Spent two hours searching 😂
Got some on order.
@@sultanhalawani9895lmaao
Perfect! I'd watched 3 other videos, and 2 different iFixit guides, and all of them were utterly useless at showing how to reassemble the triggers. Then I found this video, and I had it fixed in 30 seconds. Thank you!
just had to replace the springs in my controller and this video was the ONLY HELPFUL ONE!!
Thanks bro 🙏 i was in the same situation and thats why i made the vid haha
This video was really helpful, the other ones I've checked before didn't have the close up as this one. It allow me to understand where I had to place it, after that it was really easy.
It's not in the button but in the enclosure, at least for my model, which seem similar to the one shown here.
by clicking in the button over the spring do you need to bend/damage the spring?
Man it took me like 2 hours to find the correct video to fix this madness, thank you, subbed.
I have long nails so squeezing the spring to get it in the right position was quite difficult, and I found it WAY easier to just place the spring on the peg without any tension and then nudge the top part of it into the groove afterwards to give it tension.
May u go to heaven for this
Well mine kinda flew out my hand and well it’s gone now so feels bad smh
You can order new ones online buddy
Same
Dumb way of putting it in
Onestop Shop lmao I actually found it surprisingly. I was hella lucky but I ended up getting it in.
Lmao that happened to me and I found it again
my favorite video on the internet, thanks man
OMG thank you I was so close to buying a new controller!!!
You did more for humanity than all governments combined. You saved a lot of lives and 60$ today.
Thank you such I have watched like 50 videos but only this one worked🙏
To make it even easier, get the tips of the spring under your fingernails if you recently trimmed them. Makes holding the spring much easier.
3 Damaged Springs Later: Finally found your video, thank you
Man i fucking love you thanks dude you helped me when all the other videos donts
Everyone give this Lad a BIG HUGE ROUND OF APPALUSE FOR SAVING US MONEY AND HUGE HEADACES !!! 👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏 BRAVO !!
Lol
U r the only person who said something not about saving gods earth
Finally put the spring back, I took out more of the controller so it was mainly just the motherboard and the part I need to put the spring in. So the white rod thingy didn’t block my fingers when I placed it. Took an hour to do this when I realized an easier solution compared to yours.
What is the easier solution cuz im doing it rn?
Thank you so much went in to change the micro usb charging port and had to fix the triggers didn't realize springs were in the way putting it back together popped one spring out and kinked another but I got it fixed thanks to you!!
Mann!! You are a lifesaver! Thanks buddy.
Seriously, thank you! Good choice on tunes, too. Calm is safe.
Thank you so much after seeing about 3 videos do it wrong, yours actually shed some light into how it was actually supposed to be assembled. Great stuff.
Thanks man glad I could help 👍
IT WORKED, you saved me 50 bucks, thanks dude
TO EVERYONE THAT IS STRUGGLING TO KEEP IT CLASPED IN THEIR FINGERS:
Put some sort of glove on - I put a golf glove on and was able to do it first try without it flinging out.
Thanks a lot for the tutorial.
dude you fucking saved my life
To make it even more easier wear gloves 🧤 which doctors wear during surgery so that the spring does not slip right off your fingers
Thank you SO MUCH for making this video. When I opened my controller, the springs sprang out and I had no idea where they belonged or how to put them back in. Your video was excellent, the close-ups were very clear, and I liked your encouragement. You said it was easy and it was! Thanks, I did not have to throw away my $40 controller because of a set of 1-cent springs!!! Thank you!
Thanks! You helped me, SO much. I got those on, rather quickly, watching your video. 👍🏾
Glad I could help 👍👍
@@hoodhippo674 That spring is slippery and will pop across the room, if not careful. I know!
Bless you sir. Only video I could find of my model PS4 controller that is also super close up and clear to follow.
You my good Sir are the MAN! Watched dozens of videos on how to do this but yours was without doubt thee best! All thumbs and likes here. God Bless and have a good one!
If you're dealing with sweaty hands and fingers, just rip a piece of paper towel, grab and close the spring in and just put it back in place. I did this shit for fucking 3 hours, and triggers work just fine, thank God.
thank you so much, omg, this was so tideous but i kept trying and it worked finally
this helped me alot thank you
I just simply can't do it, I've been trying to do it for the past 3 hours. At the moment, my fingers are hurting, red, and I don't really know what to do. You make it seem so easy in the video, but I simply just can't fit it in the L2, I've tried using my thumb and index finger, but nor the left or the right hand works. What am I supposed to do now? Is there somewhere I can contact you, Hoodhippo, so I can show you screenshots of my controller.
EDIT:
Finally did what he did in the video after 4 hours; so relieved.
DELETED XX you might need a new L2 not the spring,if your right one went in fine it could be possible you broke it when playing with it
@@geezt9855 No it is not the L2 that there's something wrong with. I'm using his trick, I haven't put the L2 button on yet.
It could be he has a different generation controller then you,they’re 4 or 5 generations of controllers I’m pretty sure this is gen 1 or 2,I know it’s not 3 and up tho
I had to look up this video because I’m used to working on a certain generation controller and I have 4 different motherboards
@@geezt9855 Oh, I see, but I actually, finally, solved the problem after 4 hours; it really took me 4 hours to do what he did in the video zzz.
Thanks for the video. I was used to the older DS4 controllers where changing the springs were easy, this one made me just rage .. next time just buying a new pad.
Thanks young chap your bloody brilliant the best I have ever seen and how to put a Spring back in the housing thank you
Danke für die gute Erklärung und die passende musik👍😃
Thank god I found this
Thank you so much ur the first one that was easy
Thanks dude helped me a lot 👍🏻👍🏻👍🏻
Thanks a lot man I was about to Brake the hole controller cause it was my 2nd time opening it and I forgot so I was getting mad 😂😐 BUT THANKS A LOT
Lmfao shit is annoying sometimes 😂
Hoodhippo ikr 😅
Goated.
Thx man .. i kiss your heart 😊👍
great presentation!!!! thanks brother!
Thanks man honestly
You saved me i love you i am subscribe
OMG MY STUPID SCREWDRIVER TURNED OUT TO BE A MAGNET! R.I.P
You are a controller savior! Thank you!!!
Thanks a lot man!!! You're a life saver 😭😭😭😭
OH MY GOD THANK YOU BRO I FINALLT SUCCESSED AFTER BUYING 2 NEW TRIGGERS THANK YOU LOVE
This video is the best of all, but I broke the plastic mounting piece when taking the controller apart initially. RIP my gaming
SOLUTION: simply route the round opening of the spring along the axel of the button that goes into the mounting post of the control body.
Im from mexico, thk soo much, I can’t found a video like this, love ya ❤️
Thanks so much😉
thank you so mych fixed my 6 year old controller that ahs worked in years off of this video nice good on it too the other videos about the springs really suck but this one is aces
is this the only gen 4 video but it good thanks for tips🤞
Thank you soooooooooooooo much
Thanks so much man literary my savior
thanks for your effort to help, my controller is in 50 pieces smashed on the floor.
Life saver
Thanks i struggle a bit with the spring. You need to put it in place then push the head down to compres the spring.
It jumped out of my hand still searching
Edit: found it after 10 seconds after writing the comment
Exactly what I was looking for! Thank you, God bless
i just take a thin strip of duct tape, maybe 2mm wide and wrap the ends close together(loaded), slip it under the little hook and then pull the duct tape right off and it snaps right into place.
Thank you very much man
Thanks a lot
helped a bunch
The questions is ia spring works like it's been straight from a factory. Because when i did that, trigger was still having not much resistance when i pressed it
You legend
Thanks, in tryna see if i need to buy these but idk if im getting the ps5 or not so i dont wanna waste money
You can get a shit on of these springs super cheap on eBay or Amazon !
@@hoodhippo674 i just bought one today for 2 or 3 dollars
Thank you so much i was sooo worried
ahhhh the best thank you for your help!♥
Thank you thank you ❤️❤️❤️❤️❤️❤️❤️❤️
I got good tips came back to say spring is upside down installing gl make more videos
Thank u so much👍👍👍👍👍👍👍😀
Did this and the spring shot and vinished into Oblivion.
Thanks man is a cat boy
Thx a lot man I almost messed up the whole thing while I was trying to open the controller
I tried this along with putting the spring onto the actual back of the trigger like everyone else suggested. Neither worked.
Can you make a video how to solve option button triggered
The little piece (kind of notch) on which you put the spring has broken on my controller. What can I do ?
Thank you!!!
I felt all the evil in me was let out because of this small problem
I LOVE YOU
So does the button sit on the spring or does the button slide in between the plastic and the spring? I can't tell in this video.
LIFE HACK put a t-shirt on your fingers to take the spring
giovanni topra how u do it
I tried to do mine, but it flew to some unknown location in my room instead of landing on my giant desk.
This was very helpful. But please fix your focus on the camera before filming thank.
Very good man Very good i love you ,you Very pro s2
Please, please help. I think you may be the "life saver" to my situation. I opened up my ps4 to replace cushion under the arrow buttons. My springs fell out. Iv'e watched countless videos on youtube of how to put the springs back and their videos were good but the problem is that the layout on the backside of the R1/R2 buttons for everyone so far are different than mines. It's been kinda frustrating because I have the same version ps4 and controller of whoever bought their system around the same time as me but the layout is different. When I say help I mean please let me know if the bars on the R1/R2 buttons that you snapped in at 1:49 had plastic filled in under them or not. If they are filled then you have the same version controller as me and this is the right video.
Not sure, but what my other video ua-cam.com/video/PLVAgoW9EBY/v-deo.html hopefully in that video it shows , I just don't remember and don't feel like taking apart my controller lol
Any luck?
Hoodhippo Im just now reading this message. Ill check when I get home tonight
@@hoodhippo674 In your other video it's hard to tell but it looks like the bars have plastic filled underneath them. Mines has nothing filled in underneath
Bro your guide is confusing like how do you put in the trigger in with the spring
Thank you
THANK YOU VIE TRIED FOR 4 FUCKING HOURS TRYING TO PUT THAT SHIT BACK
Thank
the trigger above the spring or under the spring
All right thanks
How did you put the trigger back in though? Mine doesnt fit
Danke :)