How to take apart PS4 Controller and Repair the Analog Sticks

Поділитися
Вставка
  • Опубліковано 11 гру 2024

КОМЕНТАРІ • 1,2 тис.

  • @Ramingo1983
    @Ramingo1983 4 роки тому +488

    There are videos with millions of views that give us zero information and bad video quality. This is the first ps4 controller disassembly guide, that is satisfying to watch! Thanks

    • @RestoreTechnique
      @RestoreTechnique  4 роки тому +27

      Yay! Thanks man :)

    • @2500lild
      @2500lild 3 роки тому +4

      Fax

    • @ralph1389
      @ralph1389 3 роки тому +4

      Fr thanks a lot tho

    • @InterdimensionalDudeMan
      @InterdimensionalDudeMan 3 роки тому +5

      Yeah i actually realized i am unqualified to do these repairs. The other videos gave me false confidence. Unfortunately PS4 remotes have become so hard to find I'm getting desperate. I may have to buy the soldering kit and get to work.

    • @wheezsr
      @wheezsr 3 роки тому +1

      @@InterdimensionalDudeMan I'm in the same boat I have three controllers all with different issues. Now I have to take apart two of them to make one good one but always screw up those clip things and break them when I disassemble this stuff.
      Been watching bunch of videos if anybody has any more tips on what not to do would be greatly appreciated.

  • @yellowjacket3668
    @yellowjacket3668 3 роки тому +1360

    I'm the luckiest man in the world I pop open the controller without knowing about the ribbon cable and it unpluged itself perfectly

    • @RestoreTechnique
      @RestoreTechnique  3 роки тому +134

      😄👍

    • @kevinbarnett2060
      @kevinbarnett2060 3 роки тому +13

      @@RestoreTechnique t

    • @cryptogods5428
      @cryptogods5428 3 роки тому +22

      After reading this literally the same thing happened to me.

    • @_kingclutchx_1917
      @_kingclutchx_1917 3 роки тому +6

      It’s not fragile, I take apart my controller all the time, and did this a lot didnt break it once

    • @yellowjacket3668
      @yellowjacket3668 3 роки тому +1

      @@_kingclutchx_1917 kinda because it a ribbon cable

  • @cynder4918
    @cynder4918 3 роки тому +10

    Anyone who doesn’t want to risk their anolag disc. Just try blowing into the sticks when you open them carefully and pull dog hairs out if you have any. Great video!

  • @old_account4630
    @old_account4630 3 роки тому +113

    Finally a video which actually shows how to disassemble a DualShock 4 properly, I couldn't find a video which shows how to deal with the clips, some even skipped that process.

  • @Desvaswarrior
    @Desvaswarrior 2 роки тому +3

    Have taken apart ps controllers and Xboxes in the past I never thought I'd have so much trouble with a controller and now my controller is fixed and it isn't sticking anymore thank u for making the video.

  • @Doosanahaf
    @Doosanahaf 3 роки тому +115

    Just like all the rest of the comments are saying, i will add and say that this is a superb quick tutorial! As simple as can be while not missing anything. Thanks. P.S. Scuf thumbsticks no matter the size and shape fit perfectly onto the stock ps4 modules.

    • @demonplayz4032
      @demonplayz4032 3 роки тому +3

      THANKS I'm 14 and you helped me fix it in 2 minuets your the best

  • @Sr_iRL
    @Sr_iRL 3 роки тому +54

    I think the only tip left out here was to make sure you’re in a well ventilated room/area if you do decide to solder anything not just the controller. Other than that this is the best ps4 controller disassembly video I found. Cheers everyone and game on!

    • @wrathcamilo
      @wrathcamilo Рік тому

      Why?

    • @Sr_iRL
      @Sr_iRL Рік тому +1

      @@wrathcamilo breathing the smoke/fumes is bad, here is a small excerpt from a quick google search:
      Inhalation of dusts and fumes may cause irritation of the upper respiratory tract. Inhalation of freshly formed metal oxides may cause metal fume fever, a brief (24-48 H) flu-like illness. Inhalation of tin oxide may cause pneumonia.

    • @adamcolbertmusic
      @adamcolbertmusic 6 місяців тому +3

      ​@@wrathcamilo soldering wire is often around 40% lead, so you don't want to breathe in the fumes

    • @doncardegena326
      @doncardegena326 6 днів тому

      You guys are AWESOME!! thank you for that important warning tip. 🤝👍👍✊✊💪🙏🙌🙌🙏

  • @Rex211Bacon
    @Rex211Bacon 3 роки тому +5

    I just took apart my controller and did this. I didn’t think I’d be able to get it back together when I took it apart but I actually fixed my analog sticks and the buttons! Thank you!

  • @colbywallace111
    @colbywallace111 3 роки тому +6

    Thanks 👍 just saved me 85$
    Left thumb stick was not responding to up input. Pried contact open, gave it a nice cleaning, put it all back together and works perfectly again

  • @Brocknoth
    @Brocknoth 6 місяців тому +1

    I love DIY stuff like this. Been opening my electronics and cleaning/maintaining them for years. Thank you for your awesome step by step guide kind sir!

  • @sasko123456789
    @sasko123456789 3 роки тому +15

    Thank you so much for making this vid. Super helpful and made the experience of taking apart the controller and cleaning it waaaay less scarier.

  • @Dokka-Bae
    @Dokka-Bae 3 роки тому +2

    Trying to open the controller was harder there are many scratches outside but its working like a charm thanks

  • @calosa1127
    @calosa1127 4 роки тому +128

    "Cool people leave likes"
    Yup. It's tough being cool😎

  • @jlucsol1947
    @jlucsol1947 3 роки тому +1

    This worked for my left analog stick- it was sticking *no pun intended* and your visuals helped me fix it thank you.

  • @samuelnatal8014
    @samuelnatal8014 3 роки тому +6

    Really like how you put the camera so we were able to see what you did. You get a thumbs up just for that.

  • @mariosbross1
    @mariosbross1 4 роки тому +36

    Thanks for this video i fixed my controller. I didn’t feel comfortable at first to solder on my controller but it all went good

  • @antonitobendrito2243
    @antonitobendrito2243 3 роки тому +15

    Mate, you have no idea how helpful this was. My problem was left analog stick drifting up every few seconds, so I focused only on that and didn't do any extra stuff you did in this video. Also since I am fairly clever person, I changed sticks since original left stick was without gum etc. Now I am ready to get my 6 wins in fifa 21 weekend league. No more drifting!!! Thank you, good man.

  • @Nebilis
    @Nebilis 2 роки тому +1

    Thanks, i had a serious drift on both sticks and I only used this controller for like 100 to 120 hours (I don't play ps4 that much since I bought it).
    I have two controllers and one was very faulty, never had the motivation to return it to Sony.
    This video helped me open the beast and clean the sticks. Now it's as good as new (plugged in to my PC to see how the sticks were acting before and after cleaning them).
    Many thanks! It was simple!

  • @marcquezwilliams55
    @marcquezwilliams55 3 роки тому +16

    You really just explaind how I can get a visual read before using it on the game thanks so much time cut in half

  • @razyel93
    @razyel93 3 роки тому +7

    This video takes in consideration some details that other videos don't. I've never done this in it actually worked. I am glad that I do not need do change the entire stick. Thank you so much man you are awesome ✌🏻

  • @kevinhomra4869
    @kevinhomra4869 2 роки тому +3

    Dude thank you for this, my right joystick was starting to move steady to the left, and randomly twitch up. You saved my sanity ❤

  • @lastprism0413
    @lastprism0413 2 роки тому +1

    thank you for listing the specific type or model of equipment you used so I can go and buy or get it. 10/10

  • @perspectivemeditation7648
    @perspectivemeditation7648 3 роки тому +5

    Thank you so much brother man! been skeptical to do this for months, but thankfully you showed me clearly and my joysticks are NORMAL again i thank you !

  • @hustlehard7175
    @hustlehard7175 11 місяців тому +1

    Thank you ..had a old ps4 joystick still almost brand new. Had bad drift i seen your vid and right arou d 4:25 i cleaned those components and waaaalaaaaa working perfect

  • @36marty
    @36marty 3 роки тому +4

    Great video, I've got water in my controller and I'm more confident to open it now after watching your video. Thanks very much. Best one so far on UA-cam 👍👍

  • @RedwolfDogrocket
    @RedwolfDogrocket 2 роки тому +2

    *accidentally powers up ps4 putting back together*
    Analog no longer just going up....
    It worked. It worked!
    IT WORKED!!
    Thank you so much!

    • @RestoreTechnique
      @RestoreTechnique  2 роки тому +1

      Awesome, well done. I often press the PS button accidentally when fixing controllers, and my housemate is downstairs watching TV and the PS comes on all of a sudden 😆

  • @TruMine90
    @TruMine90 3 роки тому +3

    My nemesis the ribbons. These things just don’t wanna go back in.

    • @Matth3w-wil
      @Matth3w-wil Місяць тому

      Yeah just the one ribbon that holds both sides together was a pretty big pain. One half would get in and the other would be out so I had to lock in and perfectly place it into the hole.

  • @sonnykim6755
    @sonnykim6755 3 роки тому +2

    Luckily i didnt have to solder anything because i dont have one but i cleaned up the analogs and recalibrated the controller. It works now.

  • @nicholaslynch7694
    @nicholaslynch7694 3 роки тому +4

    The timing on the like shake down earned my like

  • @SirAnarkyEDM
    @SirAnarkyEDM 2 роки тому +1

    This with other controllers helped me fix the button I needed to fix without having to buy a new controller thanks!!!!!

  • @leon-Furl0ng
    @leon-Furl0ng 3 роки тому +10

    It was like asmr. I almost got slept.

  • @daniel.4k146
    @daniel.4k146 3 місяці тому

    I thought that my controller wouldn't work after I did this but to my surprise, it does works and without any drift! Thank you so much

  • @marcchavira1036
    @marcchavira1036 3 роки тому +4

    This has helped so much I've been having problems with the sway in one of my controllers and I had already cleaned the metal prongs and the pad that they lay on and nothing helped THANK YOU SO MUCH!!

  • @EmperorsNewWardrobe
    @EmperorsNewWardrobe 3 місяці тому +1

    3:49 this is the detail I’ve been scrolling through tutorials for

  • @BFG_10G
    @BFG_10G 2 роки тому +13

    Wonderful tutorial. I didn't do the soldering stuff. Felt a little too risky for me. But everything else worked.

    • @mnu1104
      @mnu1104 2 роки тому +2

      Word

    • @Matth3w-wil
      @Matth3w-wil Місяць тому +1

      Soldering isn’t bad, I took a class on it. The only thing is you do need to have a good kit and steady hands or else your solder will look like 💩

  • @jaeeski-427
    @jaeeski-427 2 роки тому +2

    Yo bro this video was helpful as hell. It helped removed a little bit of the drift, but not all I appreciate ya

  • @TheGoober2100
    @TheGoober2100 4 роки тому +5

    Thanks for showing the locations of the clasps no one else shows that

    • @RestoreTechnique
      @RestoreTechnique  4 роки тому +5

      No problem! I've been frustrated with other videos in the past, so I made sure mine was clear 👍

  • @APRP13
    @APRP13 Рік тому +1

    I know I'm going to sound repetitive but man oh man you really did help me out so much and I'm thankful for you video and thank for the info to help others. Great Job! Thank you again!

  • @entertainmentfan1463
    @entertainmentfan1463 4 роки тому +3

    What's amazing is that I came looking for this video exactly for this reason while playing Last of Us 1. It's a pretty hilarious coincidence.

  • @absurdanemone104
    @absurdanemone104 3 роки тому +2

    At first all of this seemed overwhelming but with a bit of patiance i could do it easily. Thank you for the video it saved my fifa weekend league!

  • @Tompalino80
    @Tompalino80 4 роки тому +8

    Great video and great job man! I had problem opening controler 😏
    Thank you mate!

  • @lee98210
    @lee98210 3 роки тому +1

    some tips about the dics at 4:42, if after clean it drift more, before replace the stick, try bend the 2 prongs, using the middle plastic height as reference point, the prongs is at the middle of the plastic height, and prongs is lower than the 3 thin outer circles, outer circles is same height or abit over the plastic height.
    Example for my case, the left stick X is drifting after slight touch, found the prongs near the top of the plastic height, so i have to push them in to middle, and push the outer circles a bit higher so it a bit higher than the middle plastic. And it fixed my left stick drifting.
    Then i saw in the controller test graphic, the right stick X was jerking abit, although i do not have problem in game, but i do the same on the prongs and dics, then right stick no longer jerking too.

    • @lee98210
      @lee98210 3 роки тому +1

      Btw, i found out about the prongs problem when i accidentally swap the 2 dics on the left stick, which i was having problem of up and down on the left stick that it drift upward, when after clean and accidentally swap the disc, it then become drifting left, so i test on the disc itself and found the prong and circles height solution.

    • @RestoreTechnique
      @RestoreTechnique  3 роки тому

      Thanks for this information

  • @hyspecs7906
    @hyspecs7906 4 роки тому +21

    Thanks for the amazing content! So satisfying!

  • @perfectgame2010
    @perfectgame2010 2 роки тому +1

    To be honest I have no hope whacthing these tutorial to fix the drif problem.... But it works there was white resine and a black corrosion on the joystick i clean it with isopropyl alcohol and problem resolved thanks a lot for these video

  • @cherifmihoub922
    @cherifmihoub922 4 роки тому +7

    One of the best Soldering works i saw in YT.. Clean Job Bro.. Thank You.. And Good Luck ❤ Subscribed for sure.. Continue ✌

  • @AngeliqueNade
    @AngeliqueNade 3 роки тому +2

    My controller is a different model, but taking it apart and replacing the parts were relatively similar.
    Thank you for sharing this video.

  • @talalali8378
    @talalali8378 3 роки тому +13

    I couldn’t open it I just closed it back up while hoping to forget the scratches I caused!

    • @katdaddy469
      @katdaddy469 3 роки тому

      I pulled the screws out of mine. Accidently dropped it on the floor and Wala! It was open lol

  • @petergut6445
    @petergut6445 3 роки тому +2

    Thank you man, my stuck went wonky during ghost recon and it just needed to be readjusted. Now it almost plays like its new, bless you.

  • @brunolemos1587
    @brunolemos1587 3 роки тому +10

    Amazing video! All the close ups, step by step guide and edition! Fantastic!

  • @JL-cn1qi
    @JL-cn1qi 3 роки тому +2

    Finally a video that clearly shows where the clips are on the 2 shells .

  • @Oripave
    @Oripave 2 роки тому +9

    who else feels like an untrained surgeon while doing this lol

  • @segagamecast5954
    @segagamecast5954 3 роки тому +2

    ive done this type of replacement before and also noticed that the joystick didnt have that OEM feel when i was playing my game. im still on the lookout for good quality joysticks.

    • @RestoreTechnique
      @RestoreTechnique  3 роки тому +2

      It's all to do with the spring inside I realised. I realised the best way to do it is just replace the 2 side potentiometers and keep the original module.

  • @andreslanza3320
    @andreslanza3320 3 роки тому +3

    Thank you!!!! I bought a new controller a month ago and it started to stick drift yesterday (I like to play FPS so the run button always gets messed up) I did exactly what you did, cleaned it and put it back together and it’s not drifting anymore!!!! It was driving me insane. Thank you!!

  • @NicksBricks
    @NicksBricks 3 роки тому +1

    Thank you so much! I had this controller sitting in a plastic bag useless for 3 months. Now I can finally use it again.

  • @MattSanipass-wq9ju
    @MattSanipass-wq9ju 3 роки тому +15

    Wish i watched this before opening mine

  • @DeanPregler
    @DeanPregler Рік тому +1

    Thank you. Had a drifting right controller and non working down D pad. I told my daughter I figured a 3% chance I fixed it. Works perfect now. I used electrical cleaner though.

  • @afraazkhan2135
    @afraazkhan2135 3 роки тому +6

    Amazing video man!👍👍I was looking for this solution and hopefully you showed everything clearly. Please keep posting on other repairability of components like power supply, disc drive etc. It is of great help man!!

  • @mxmj1
    @mxmj1 Рік тому +1

    Thanks! Helped me repair a wonky joystick😅😂

  • @parvildrobu
    @parvildrobu 3 роки тому +3

    Had crazy vertical drift on right analog stick, I've fixed this by cleaning, using your video :) Thanks!

    • @PVEDAYZXB
      @PVEDAYZXB 2 роки тому

      Sadly my left stick drift didn't get fixed from this teardown. I cleaned everything, still have issues probably a bent contact or something. New controller time u guess 😔

  • @DeeBellwether
    @DeeBellwether 3 роки тому +1

    thanks to this i was able to restore function to my controller. the tools cost me under 20 bucks, i saved at least 40.

  • @LM-uz4pr
    @LM-uz4pr 3 роки тому +3

    You saved my controller, I cleaned the contacts and good to go

  • @ShatteredReaper26
    @ShatteredReaper26 3 роки тому +1

    Whew You Saved My PS4 Gold Controller Analog Stick It Had Been Not Letting Me Sprint On a Majority Of My Games Especially Dying Light Thanks Alot Man ✌🏼😝

  • @Dexdlysinz
    @Dexdlysinz 3 роки тому +3

    If you ever get a pre owned controller at game stop, this is what you get. They get used controller that was broken or don’t function correctly, they repair it and clean it and give it back to game stop so people can buy it.

  • @dagamerthorshorts1028
    @dagamerthorshorts1028 2 роки тому +2

    Best vid ever and it’s a life saver

  • @RudysFunTime
    @RudysFunTime 3 роки тому +3

    Great!! Almost watch every video and most of them are super satysfying!!! Man I love your channle!!

  • @shaniecesmith4328
    @shaniecesmith4328 3 роки тому +1

    This video deserves more than a like

  • @alfonsoa9197
    @alfonsoa9197 3 роки тому +12

    Great video ! No B.S... just the way it should be.
    **Spoiler alert** I particularly liked how your first remedy didn't fix the problem... leading into the final solution. SUB'D

  • @StopComplaining1
    @StopComplaining1 2 роки тому +1

    Holy shit this is life changing right now

  • @guitarsk8r11
    @guitarsk8r11 4 роки тому +3

    Thank you so much! I had jittering in the vertical directions on the left stick, and wiping the contacts with isopropyl alcohol totally fixed it! Great quality video!

  • @jovencalicdan5264
    @jovencalicdan5264 3 роки тому +2

    Best guide ever! Fixed my DS4 quickly! Thanks for the guide.

  • @Camromulus
    @Camromulus 4 роки тому +9

    My controller has been having some serious drag, twitching and drift and I was thinking about cleaning it myself but after seeing this I'm gonna just buy a new controller. Lol.

  • @thekeeperoftwindragons5976
    @thekeeperoftwindragons5976 2 роки тому +1

    Thank you so much! My controller has been giving me issues so i watched this so I could take it apart to clean the sticks. It helped!

  • @iAmConfusion
    @iAmConfusion 4 роки тому +17

    I subbed cause it was the last of us on screen lol

  • @RegionalRadioShackManager
    @RegionalRadioShackManager 3 роки тому +2

    Thanks the cleaning method worked flawlessly!

  • @MikeAnthony2007
    @MikeAnthony2007 3 роки тому +7

    You could have just replaced the sensors inside the potentiometers(the circular spring looking things you said not to bend) you can get. 10 pack on Amazon. Just take out the sensor springs from the ones you ordered and put them in yours. Those things are the cause of drift about 90% of the time. So it would save you the hassle of desoldering anything. The other 10% it’s the metallic connection inside the potentiometers that scrapes off from wear and the sensor spring doesn’t have a good connection. At that point you could just replace the whole potentiometer which you will have to desolder. All in all this controller could have been fixed by just replacing the sensor springs you took out.

    • @RestoreTechnique
      @RestoreTechnique  Рік тому +1

      The metal discs are called wipers, and they usually don't go "bad", as they're metal, and not heavily spring loaded. It's usually the other part, the carbon track which erodes after extended rubbing by the metal wiper. What makes you say that is the point of failure 90% of the time? I've never seen any videos of people bending back the prongs to restore them 🤔

    • @DaFullo
      @DaFullo Рік тому +1

      @@RestoreTechnique Agreed, the thing that wear more are the one that soldered to the board rather than the disc itself. But I think it's possible to just replace the potentiometers itself and save time more time by just desoldering the potentiometers. And another thing that I noticed is that the clip that connects the disc and the carbon track you had for the replacement there is different from the original, so I guess it's the lower quality or fake alps one.

  • @BrahiemHylton
    @BrahiemHylton 7 місяців тому

    Well done, my controller was broken for months and now it's fixed.

  • @ravideepsran7690
    @ravideepsran7690 4 роки тому +6

    Great video dude ! 👍🏼

  • @MamaMo2-2
    @MamaMo2-2 Рік тому +1

    I watched the whole video and kept thinking, man I hope my controller is just dirty. LOL I saved the video just in case. I have 5 controllers and only 1 works. I am tired of just buying new controllers. Worst case scenario I'll be paying 4 bucks each controller to repair. Thanks for the video.

  • @tankgirl9324
    @tankgirl9324 3 роки тому +3

    This is a fantastic tutorial! Thank you for uploading and sharing your knowledge!

  • @lelelel7199
    @lelelel7199 Рік тому +2

    Great Video! I didn‘t expect it to work for me as i don‘t have any experience at all but somehow it did work.Thanks

  • @arbidjafri9675
    @arbidjafri9675 4 роки тому +5

    i Love your Work Bro 💪

  • @waddupbr0ski
    @waddupbr0ski 2 роки тому +2

    Thx for making this video, without this video I’d be lost

  • @slickyricky6384
    @slickyricky6384 3 роки тому +5

    Wow...this is crazy... I would still buy another controller tho... I don’t trust myself enough to not mess it up lol

    • @Ghazi_Al_Tamimi
      @Ghazi_Al_Tamimi 3 роки тому

      Yeah me too

    • @austindraws4876
      @austindraws4876 3 роки тому

      TBF if you’re buying another controller might as well practice so you stop having to buy new ones

  • @ivannz3370
    @ivannz3370 3 роки тому +1

    Omg I can’t believe I took my hole controller apart everything and I fixed all my problems thx so much

  • @NapoleonBorn2Party
    @NapoleonBorn2Party 3 роки тому +6

    I have long thumb nails, and I use it as a prying tool. Works everytime

  • @immortalpkg8951
    @immortalpkg8951 3 роки тому +1

    You saved my life because my controller also did that and my parents said this is the last controller for me thnx

  • @rogerdn8665
    @rogerdn8665 3 роки тому +17

    One of the best disassembly videos of this control on all youtube!
    Great footage, great technique and use of the right tools! I became a fan of your channel! Congratulations!

  • @ktb6865
    @ktb6865 3 роки тому +1

    This is so satisfying to watch, from start to finish

  • @nickstabz8755
    @nickstabz8755 3 роки тому +5

    The shell is so hard to remove

  • @trevorray5725
    @trevorray5725 3 роки тому +1

    As I watch this Im cleaning my controller, pressing pause.
    Ive been at this for an hour and a half plus I ate some food and even got distracted so honestly I have at least 3.5 hours invested into my controller and this video and Im telling myself "lots of tedious care required for this specific procedure... I wish"
    Ive been cut off from my 🚂 of 💬 with a genius pick I will add
    "getting things done like i have a goal"
    type of music and my frustration is gone 😄 Thanks Dude! Great video overl all for texts instead of an audible narrative Editing on point with the timing. I would like to see more animations and sound effects. They're fun 😄

  • @greygamer6220
    @greygamer6220 4 роки тому +4

    Good clean work!

  • @clubardi
    @clubardi 3 роки тому +1

    All I did was search how to open a ps4 controller bc needed to know what size screwdriver I needed and funny enough this was the first video I got and by chance, it was the exact problem I've been having

  • @kongmode
    @kongmode 4 роки тому +8

    Is this asmr or something , my ears tingling

  • @matthewdegunst8788
    @matthewdegunst8788 3 роки тому +2

    Great video! The clips that hold the top and bottom together ended up snapping but that's what the 4 screws on the bottom are for 😂 imo theyre the least important part of the controller so I'm not too phased

    • @RestoreTechnique
      @RestoreTechnique  3 роки тому

      Thanks! Yeah the clips just hold the controller together a little tighter at the seams, mainly aesthetic.

  • @CocoSnicker12
    @CocoSnicker12 3 роки тому +6

    Great guide. I'll definitely use this when I clean my DS4. Oh I just wanted to ask about your 5 year old controller with the original sticks, did you ever have any issues with that controller?

    • @mellodemooz-7604
      @mellodemooz-7604 3 роки тому

      I’ve had a controller prob since the same year ps4 came out and it’s pretty faulty like it won’t even move I only got joystick problems tho thankfully

    • @RestoreTechnique
      @RestoreTechnique  3 роки тому +1

      I have never had any issues with it. I've since sold it to my cousin, i hope he hasn't had any issues.

  • @deeplays7164
    @deeplays7164 2 роки тому +1

    Amazing tutorial, imma give this a try with one of my broken controllers

  • @antqine194
    @antqine194 3 роки тому +3

    Watch another video and fucked up my controller... You saved me from not damaging my second one 😅

  • @thegrandadmiral4380
    @thegrandadmiral4380 2 роки тому +1

    I'm not even joking I have a red PS4 controller just like this one and while I was playing the Last of Us, my aim keep going to the right or Joel would start strafing. What are the odds! Thanks for the useful video tutorial!

  • @nateiscool0857
    @nateiscool0857 4 роки тому +3

    I was the one who gave him that red dulshock controller

  • @DanyRouchett
    @DanyRouchett 2 роки тому +1

    It works!!!! Very nice tutorial. Thank you so much! :D