Mazzer Mini Doserless Coversion - Niche Zero or DF64 Alternative?
Вставка
- Опубліковано 16 лип 2024
- Rather than buying a Niche or a DF64, I converted my 10 year old Mazzer Mini for home brewing. Mazzers are workhorses, commercial grade and can pump hundreds of cups without breaking a sweat and surely I couldn't let mine go to waste.
#BREWDOL #Mazzer #Mazzermods #CoffeePH #SpecialtyCoffee
--LINKS--
Taiwanese Mazzer Mini Mod: home-doserless.com/product/maz...
3D Print designs including Mazzers: www.thingiverse.com/
Decouverte for 2nd hand Mazzers: decouverte.ph/
Coffee Home Brewers FB Group: / coffeehomebrewers
--SOCIAL MEDIA--
Instagram: / babescoffeeph
Facebook: / babescoffeeph
If you read this far, it would be a huge deal for me if you like, share and subscribe! :) - Фільми й анімація
Thank you! It is very nice in black
you are indeed a coffee enthusiast bro
Thank you and happy brewing :)
Maraming salamat po sa ideas na ibinahagi nyu po sa amin. Talagang magagamit po namin ito
Thank you and happy brewing :)
ganda naman nang mga produktong pino-promote nyo sir. sulit na sulit yan sa kanyang presyo
Thank you and happy brewing :)
Awesome! Did it came to your mind trying a tilted base mod? Maybe could help with retention.
So you mentioned that you're getting 3-5 grams of retention... but looking at your scale at the end, you got it to 19.7 so only .3 grams off.
is the rest of the coffee stale coffee from a previous brew? even with the bellow?
Cheers, great video.
I just got a 2nd hand mazzer mini very cheap here and am doing this exact mod to it :)
hey, our bad, it's supposed to be .3 to .5 grams of retention :)
Happy so far with the mod. The only problem that I have after using it for almost 5 months is with the bellow. It's starting to break most likely due to the quality of material used in the 3D printing process. Keep us updated with your mod!
Could you tell us what paint you used (in a spray can I guess) and how many layers you went through?
hindi ko po alam kung ano po yan pero ang galing naman dahil ang laki ng pinagkaiba sa luma at bago ngayon...
Thank you and happy brewing :)
Is it applicable for Mazzer mini A ? Which has the funnel and a push button to grind.. my problem is the retention of the coffee in the funnel (chamber)
Just changed the doser to a single doser, the older doser I had to cut two wires in order to remove the old doser and now the grinder does not turn on? Was I not suppose to do that? I have the same doser as you with the 3-D print…
Ganda naman sir sana magkaroon din nang sariling shop
Go for it! Pop-up muna yung iba nag start para low capital lang :)
Hey great video. Can you please link that actual design you used from Thingiverse. Many thanks from UK
Pa one coffee please. Na nosebleed ako pero I enjoy watching it. Yes mas better po bumili ng second hand. Same din naman.
hahaha yes, may mga 2nd hand mas sulit! :)
Thanks for the vid! When it comes to retention, it would help if you get a small spritz / spray bottle and lightly mist some water over the beans. This method (RDT) should reduce static, and eliminate a lot of retention. So if you’re getting .3g retention now, you’ll probably get .1 or .0g after RDT.
Thanks a lot, Garret! I'll try this out and see if retention will be lessened! This is new info :)
@@babescoffee373 and?
Muntik ako ma nose bleed.. diy pala to oh.ganda laki ng pinag bago
hahah Thank you and happy brewing :)
She is maganda! Trying to get one locally in Brooklyn
Thank you! Hope you can score one Edward. You'll likely need to replace the burrs but should be all good after that :)
Could you please add a link to the files for both of these mods , would love to have this same set-up 😊
It's in the description already (let me know if there is anything missing) or if you are based in the Philippines you can also check JP Prints of Las Pinas 😊
It looks like you meant to say 3-5 tenths* of a gram of retention. That’s what the scale was reading. Three to five full grams seems more in line with what I’m getting with the full doser! 😅 Really stunning job you did! Can’t wait to upgrade mine, but I might just eat the 200 bucks tbh. Not sure where I could access a decent 3D printer.
ooh you are right, we missed that part :) not sure where you are located, but there are so many shops here in the Philippines offering 3D printing services. You just need to share the file from the description of this video. Hope this helps!
😢😮o😮😮o😮
can this 3d print use for super jolly?
Hello, there's also a version available for the super jolly. Check out thingyverse for other options :)
@@babescoffee373 already printed it.. it seems cant get zero retention enough
Agree, you'll either need to brush or blow hopper to reduce retention :)
Not 3g is 0.3g
Naol marunong mag english
Hahaha - underpaid alalay na taga edit ni babes