Ot: I have hydraulic shock absorption blocked for oil spilled during the transportation! What oil I need for shocks and where the position I must pour ??
This is wicked, I bought some new indicators from Ali but when I installed them they fried, can I ask, should the indicators be 12v? Once I determine I have the right indicators I can move on to diagnosing the issue, are yours 12V motorbike indicators? Thanks mate and great vid 😉
I have a problem.the left tail light is not working.i changed the connectors and work,but the right tail light don't work with the coonector from the left one
These are great if you baby your scooter, but if you like banging your scooter around you will eventually or more likely accidentally step on those and break them off.😢
I made a 1/2 inch thick plywood cover with two heavy coats of polyurethane finish to make weather resistant and then sticky back skateboard grit adhesive over that. Protects the whole back end. Also a plywood deck cover with the same finish and completely covered with grit adhesive, like a skateboard. It made the deck two inches wider for more standing room. Looks freakin' awesome too.
Buon pomeriggio Sto cercando di ricollegare i cavi a questi indicatori di direzione di serie e non so quale cavo da qualche parte si prega di aiutare😢
Bonjour moi aussi j'ai mis des clignotants mais attention car j'ai deux boyueda et elles ne sont pas toutes les deux identiques 😜😋🛴🇨🇵
Ot: I have hydraulic shock absorption blocked for oil spilled during the transportation! What oil I need for shocks and where the position I must pour ??
You can use any syntetic oil for shocks. You pour on top of the forcks where there are the two big red nuts
@@screwriders plz another problem is how much grams or cl for shock of synthetic oil??
This is wicked, I bought some new indicators from Ali but when I installed them they fried, can I ask, should the indicators be 12v? Once I determine I have the right indicators I can move on to diagnosing the issue, are yours 12V motorbike indicators? Thanks mate and great vid 😉
You fried them because they needs to be 60v
@@screwriders Can't find any good looking 60v signal indicators on Alix, all i can find are 12v ones smh..
Salut c'est bien mais les boyueda non sont pas toutes les mêmes car j'en ai 2 et je sais de quoi je parle 😋😜🛴🇨🇵
Techer why did you remove the stock leds blinker why did you cancel the stock leds cable?
I didn't remove them. I turn them into position lights.
I have a problem.the left tail light is not working.i changed the connectors and work,but the right tail light don't work with the coonector from the left one
Probably a problem with the switch on the handlebar
Boa tarde. Quero instalar uns piscas também como poço comprar
Where did you find the jumper cables?
Those are from an arduino kit, but you can find them on ebay
Did you find the jumper cables ....When I write that I get car battery cables lol..
I really need this job on my scooter bro ., where are located .... so you can fix my scooter my teacher
Italy 😂
Nice job there buddy! Next is the front?😁
Probably in the future. I'm still testing something first 😁
Those two wires that you connected it to the connect to the blinkers isn’t working
Scuba lo Stop grande è di serie o l'hai aggiunto tu?
Non è uno stop quello. Comunque si è di serie.
I heard if blue w*re from controller is been c*t scooter goes f*ster. How true is that
Ciao vorrei sapere dove le hai acquistate,se mi puoi inviare il nome e le caratteristiche,grazio
Trovi il link in descrizione
These are great if you baby your scooter, but if you like banging your scooter around you will eventually or more likely accidentally step on those and break them off.😢
Not for offroading 🤣
I made a 1/2 inch thick plywood cover with two heavy coats of polyurethane finish to make weather resistant and then sticky back skateboard grit adhesive over that. Protects the whole back end. Also a plywood deck cover with the same finish and completely covered with grit adhesive, like a skateboard. It made the deck two inches wider for more standing room. Looks freakin' awesome too.
It looks just like yume 10