Thank you for demonstrating this controller. I now know the controller i bought on Amazon does not function as you demonstrated @2:50 Only one left light switch works when pressed. I even bought a second controller which has the same fault, no signal from the right-turn button. If i had to guess, there is a diode on the control board which was accidentally reversed. When i wired it up, i only got an output signal from the blue wire, nothing from the green. The main lights and horn function as they should. I could use that blue signal to flash both indicators at the same time to act like a hazard warning.
Great video! Thanks for providing clear information (I’m a complete novice) as this was the first tutorial for this exact switch that explained how to connect clearly. I’m installing 12v DRL (in-built controller) led strips to my escooter (main usage is the turn signals), would you recommend using a 12v portable battery or can a converter with a 2000-3000mah battery work?
amazing and simple explanation, im pretty sure i will be able to do the same, following the intructions here. By the way can you do some videos on how to upgrade stock ebike motor controller to more powerfull one and how to chose which controller to use. plus how to find ebike battery real capacity, cause i feel like sometimes the battery capacity claimed by the seller is much lower than what it actually is, especially with those chinese brands.
Hi friend... About how to upgrade controller i it is in my mind... about fake batteries it is easy to find the real capacity,,,. i suggest to not buy batteries from internet..
The backlight would use the same feed as the front light, to come on at the same time unless you wanted to wire it to your ebike brakes cut-off to act as a breaking light.
Thank you for demonstrating this controller. I now know the controller i bought on Amazon does not function as you demonstrated @2:50 Only one left light switch works when pressed.
I even bought a second controller which has the same fault, no signal from the right-turn button. If i had to guess, there is a diode on the control board which was accidentally reversed.
When i wired it up, i only got an output signal from the blue wire, nothing from the green. The main lights and horn function as they should. I could use that blue signal to flash both indicators at the same time to act like a hazard warning.
You are the best !!
You should make some type of light harness , I know I would buy some 🤙🏼
😄😃
Congratulations for your Channel and content. From Brazil.
Thank you very much my friend!!
Great video! Thanks for providing clear information (I’m a complete novice) as this was the first tutorial for this exact switch that explained how to connect clearly. I’m installing 12v DRL (in-built controller) led strips to my escooter (main usage is the turn signals), would you recommend using a 12v portable battery or can a converter with a 2000-3000mah battery work?
Hi friend.. obviously with dc to dc converter 72v to 12v 3A, they are almost free on AliExpress
@@EVCustomsperfect, thanks for the reply! AliEx is my go to right now. You’ve a subscription from me too :)
Do you know what we would really help, if you would've just shown a wiring diagram of what wire does what
Hi friend, you can find it in my Patreon profile >> www.patreon.com/evcustoms
amazing and simple explanation, im pretty sure i will be able to do the same, following the intructions here.
By the way can you do some videos on how to upgrade stock ebike motor controller to more powerfull one and how to chose which controller to use.
plus how to find ebike battery real capacity, cause i feel like sometimes the battery capacity claimed by the seller is much lower than what it actually is, especially with those chinese brands.
Hi friend... About how to upgrade controller i it is in my mind... about fake batteries it is easy to find the real capacity,,,. i suggest to not buy batteries from internet..
Hello. I buy this product and I have a question. All the buttons do click. The horn doesn't. Is it normal? Thank you.
The horn is a momentary switch, to only sound when pressed. The other switches are latch switches to remain on, until pressed again.
hello frind Do you have an idea to connect a brake light not through a controller
Hi friend.. yes i have some videos...
ua-cam.com/video/oJhtpDzEXUI/v-deo.htmlsi=_NwAz3PyEob2kJwN
Hi , kindly make a video on votol em150 sp controller connections
Is it necessary for the converter
These controllers are rated up to 36v.
No back light😮😮😮😮
The backlight would use the same feed as the front light, to come on at the same time unless you wanted to wire it to your ebike brakes cut-off to act as a breaking light.