Can tire foam really clean your engine? Let's find out (with weekly updates!)
Вставка
- Опубліковано 8 кві 2022
- Welcome back everyone! In this video, Bob puts ArmorAll Tire Foam to the test and finds out if it can really clean your engine. Let us know what you think in the comments below! Thanks for watching!
Tire Foam - amzn.to/37f3qeI
Some other items to consider:
Dorman Oil Fill Extension - amzn.to/3yONHfd
Oil - amzn.to/3CNfmiZ
Oil Filter - amzn.to/3iLTgp9
Oil Filter wrench - amzn.to/3CJWn97
Tool Kit - amzn.to/3acTWPN
Shop Rags - amzn.to/3e3OBv3
Shop Towels - amzn.to/3mRx0dG
Extensions - amzn.to/3cgcfEU
Loctite - amzn.to/3dyyMOe
Brake Cleaner - amzn.to/3uyr8vT
Video Gear:
DJI Osmo Mobile 3 - amzn.to/32mHI39
GoPro Hero 7 Black - amzn.to/2U4mcvh
62" Camera Tripod - amzn.to/2JNEnne
GoPro Single Suction Mount - amzn.to/3kbbzl3
GoPro Three-Arm Suction Mount - amzn.to/3k6ke8h
As an Amazon Associate, we earn from qualifying purchases.
We get commissions for purchases made through links in this post.
Disclaimer:
Trick Shift Garage hosts are DIY (Do IT Yourself), not mechanics. Due to factors beyond the control of Trick Shift Garage, we cannot guarantee against improper use or unauthorized modifications of this information. Trick Shift Garage assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Trick Shift Garage recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Trick Shift Garage, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Trick Shift Garage. - Авто та транспорт
The ULTIMATE Ford Drum Brake Replacement!
ua-cam.com/video/11WA-u35o6g/v-deo.html
Here is how you revive 27 year old bolts…
ua-cam.com/video/gJlypzeuPPc/v-deo.html
Want to know how to SUPER FLUSH your vehicles engine? Check this out!
ua-cam.com/video/0uiYZmK6PU8/v-deo.html
It probably leaves a more protective coating on plastic than it does on rubber because the rubber soaks it up and tires are exposed to the sun all day long where underneath a hood, that coating will last a lot longer with it not being exposed to the elements.
Plus, it's definitely getting baked into your plastic for sure.
I'm 70 and widowed. My dad and husband used to take care of my cars. I've had to depend on Jiffy Lube and a real Auto Mechanic for the repairs and lubes. But none clean your engine. It is a 2003 so it's 20 years of grime built up. Putting it thru the carwash doesn't clean your engine. While It won't make the dirt disappear it does loosen it. So I followed up by wiping down the surfaces and hoses with paper towels. Then I applied a 2nd coat came back in an hour it's about 68 deg. out today with light breeze. I only used 3/4 of a can total on a Toyota Matrix engine. It looks AMAZING!!! I wore those translucent lightweight gloves and put the dirty paper towels in a plastic bag. It was about 1/3 of a roll of paper towels. I'm happy as a clam I don't expect miracles for a quick fix but this was way beyond my expectations. Thanks for giving me the basics. I didn't catch the part about covering your air filter... I'll jus have to pray it didn't ge into it. Mine has a clip on lid so I think it will be ok. Wish I could include a photograph here.
Rain that's awesome to hear! It gives the engine a pretty nice shine for something you just spray on. Pretty wild how it works. If you want to send a picture, you can send it to our email (trickshiftgarage@gmail.com).
Thanks for watching and sharing!
Tried this technique and it worked great. Got me thinking about other filthy objects in my garage. My leaf blowers, chain saws, weed whacker etc. It worked great on all of them, Truly a hidden cleaning gem.
Glad to hear it! Thanks for watching!
man this is a cool video, going to try this this week end
Awesome man, let us know how it goes! 🤟
People and car dealers have been using tire foam for years to clean under the hood. You don't even have to leave it overnight. I cover the alternator first then spray everything with tire foam, leave it for a few hours then spray hose everything down, then let everything dry out before starting up the engine. You don't have to worry about the tirefoam being flammable because you will be spraying the excess way during the process.
Good point! 👍
I've been doing this for years on my cars. I will use a couple of cans of engine degreaser first (on a warm -*not* hot engine bay), then gently wash off with fine mist of regular water out of the hose. Then will use leaf blower to dry everything off. Run it to get all the parts warm. Finally Armorall tire spray foam making sure to get as much as I can. Let it dry and it looks like brand new. I've found that only Armoroll is by far the best product to use. The others just dont make it look as nice. A+++ good idea!! You won't even get your hands dirty either. There will be a telltale smell with AC on, but goes away quickly.
Yea it worked better than I was expecting to be honest. Such an easy way to make your engine bay look better.
For 2007 advisable to use?
@@johntv5586 Yeah... you can do this on any engine/engine bay. Don't use anything but *armorall spray foam* I usually do *not* endorse Armorall anywhere on a car, but this application, it works the best...and does not leave an 'oily' looking finish. If there is any remaining, use leaf blower. I am sure you will be pleased.
Great video
Thanks for watching and taking the time to leave a comment! 🤟
I saw your video last night. I drove to the store and bought a can, and sprayed my engine on my 98 Durango I bought 2 weeks ago. This morning my engine looks like BRAND NEW!!! Thanks!!!!!!!
Awesome man! I'm glad it helped! 🙌
“looks”. lol
@@stevenlengyel9701 can I ask why "looks" made you laugh out loud? Or do you just type lol after your comments like so many seem to do? I said in my original comment that my Durango is a 98 model. Did you expect me to say it turned my engine into a brand new engine? Seriously...what was funny about it???
Never mind. I just saw another of your comments saying maybe just spray oil on your engine. Like I thought...you are just a smart a** pr*ck making stupid comments for no reason whatsoever.
I use at engine bay,snorkel,steel bumper and any plastic part,look good
Nice! Hey how well does it work on a steel bumper? It's seems to work really well on plastics, but I am curious how well it holds up on steel.
Does it make it sticky? I bought a curb stone once and they sprayed something in the engine bay and made it all greasy and tacky. I'm actually looking for something to clean an alternator. I'm guessing oil eater is the way to go.
Hello Yogi's Garage! No it didn't make it sticky, but it was a tad bit greasy for a month or 2. Thanks for watching! 🤟
great video. i have seen lots of these videos but i am still questioning myself. some people say to wipe down after i spray and others say hose it down and in this video you say just let it sit. so if anyone has any suggestions let me know thanks for your help and have a good one
Hello MegamanARC! Personally, if I was to use this product on my engine, I would do the following:
-Clean engine with soap and water
-Rinse it off
-Let it dry
-Spray Tire Foam on engine and let it sit overnight (to allow the product to coat the plastics and hoses)
This video was just a test to see how it performs when you just spray it on. While I was surprised by the results, you will always get a better result agitating the dirt with soap and water first.
Thanks for watching! 🤟
There's more than one way to skin a cat. You can do both 👍
This stuff is super flameable when it first comes out as foam but once dissolved its safe, You think leaving the battery connected is safe to use?
Hello S R! In my opinion, it's completely safe. There is such a short time frame after it leaves the can where it's flammable. It loses its flammability really quick. So, I was not concerned at all about that.
But there are always different scenarios for everyone, so I'm not recommending anyone do anything that I do. I don't want to be responsible. This video in particular, was a test to see how it can clean an engine without agitating any dirt or debris.
Thanks for watching! 🤟
You should have blew off the engine first with either air compressor or leaf blower could you spray on while a few minutes then hit it again with the air then after use a towel and rub it in for best results cheers Graham
That's an option, but this video was mostly to see what the product can do without any help. Thanks for watching!
Seems that spraying this stuff on dirt just makes the dirt shiny.
Maybe suited to maintaining a generally clean engine.
With any chemical compound, you always need to be careful of migration into sensors.
I wouldn't worry too much about the sensors. If that was an issue, you would have issues everytime it rained.
But you are right about spraying it on a clean engine. It's doesn't really do the cleaning for you, but things are shiny afterwards.
can this clean the hood?
I love a clean engine, despite the risk (...that the engine might not restart or else damage something expensive... although this has rarely happened to me if I used caution). But using that awful smelling "engine degreaser" from the auto parts is a disgusting chore because the stuff smells SO BAD. I'd swtich to the tire foam in a hot minute if I thought it might work, smells like roses compared to any degreaser, but I'd expect to do some scrubbing (or else you are just armor-alling the engine dirt).
A clean engine is just better and not just for looks either. The engine runs a tiny bit cooler and potential problems, like leaks or loose fittings, are easier to find when not covered in filth. And doing maintenance is much nicer too, when you can stick your arm into the depths of the engine compartment and not return with a limb covered in black oily dirt, it makes ordinary chores like oil change or coolant much more pleasant.
Also there's less likelihood of crud falling into the engine while doing something else on it. It is very satisfying to open the hood (of my Lexus LS460) and see a clean engine inside - to me its the best car in the world, and I want it to look that way.
Pretty cool!! I’m going to use purple power and clean everything really dirty first then use this trick!
Great video!
Awesome! It really does help keep the shine under the hood! Thanks for watching! 🤟
Be sure to use the standard Tire foam buy Armor All. Do use not EXTREME Tire foam or anything that says "shine" on it as it will leave a sticky residue that attracts dust. Regular tire foam only. Trust me, what's the difference between the two products make or break the end results
Good tip! Thanks for sharing! 🤟
Do you have to keep it off the belts and pulleys?
I haven't had an issue since I sprayed it. I did replace my belts about a year ago and all of my pulleys were in good condition. So, as long as you don't have issues before spraying, I think you will be just fine.
So there is no wiping off or rinsing?
That's up to you. I wanted to see what would happen if I just spray it on and let it sit.
Is this safe for electrical connections etc ?
I haven't had any issues. If you don't have issues in bad weather, then you should be fine. 👍
Don't forget you also need to put a plastic bag over the alternator
You can if you want to. I personally think that's overkill. My alternator is located low in my truck, so it's exposed to all sorts of water and debris. I just don't think that's necessary unless you plan on scrubbing every part of your engine down. Then, it may be worth it to prevent the brush or other cleaning tool(s) from messing up the wires in the alternator. Thanks for watching! 🤟
You don't have to... Ive done it on my Audi and car Runs fine, no issues.
May not be necessary (I've never done it).....but the only thing I *don't* recommend is spraying the serpentine belt with it. Don't have to be overly carefull, just don't aim it at the belt. A little overspray is acceptable
Damn right! If I wanted to make my fortune, I'd design and sell disposable cleaning covers from clear plastic, just for covering of the sensitive engine components during a cleaning. I'm certain people would pay for that so, where are they?
I do this also but l buy cheap towels at dollar tree and 1and2 inch paint brushes.its more work and l get amazing comments.
Awesome! I'll have to look into that! 🤟
@@TrickShiftGarage it also gives a more natural look feel ,when l do a a vehicle peaple like to touch can't believe nothing comes of on fingers.and for what it's worth l use large Ziploc bags on alternator s
I'm still not convinced bags on an alternator are needed. They get soaked when it rains. Unless you are using a pressure washer to clean your engine (which no one should ever do) then you don't really need to cover up anything.
Well, except the air box. But that's obvious.
2023 November save your money-take a bag full of dirt throw on your motor-better n cheap-leaves runs -like Scotty Kilmer says 20 dirty motor stills running GREAT
tkx Scotty knows best
What?
Did this work on the alternator?
Hello Manny! The only materials in my engine bay I noticed a difference was on the plastics and hoses. I did not notice enough of a difference on the metal parts. Thanks for watching! 🤟
Yes, its safe, done it on my audi.
Maybe just spray it with some oil it may look shinny after that.
Hey smart a** pr*ck! You know "shinny" isn't a word? You really should learn how to spell before you try to make smart a** comments. Otherwise you just look MORE ignorant than your comments suggest.
Umm. I wonder if this will make the surfaces more apt to catching fire. 🤔
Hello MC! I was worried about that too, but it seems like it loses it's flammability shortly after leaving the can. I'm not sure how long it takes, but I drove home about an hour after spraying it on and didn't have any issues.
Thanks for watching!
ATTENTION entrepreneurs in the audience: If I wanted to make my fortune, I'd design and sell disposable cleaning covers just for washing your engine. I'd make them from clear plastic,sized appropriately with a twist tie, made just for covering of the sensitive engine components during a cleaning. I have tried everything from garbage bags to plastic shopping bags to cover up the alt and the starter connections plus the air intake. And they work well enough if I avoid directly spraying the area. BUT none of these methods really do the job of covering the sensitive engine elec adequately so a purpose-designed product would be welcome, at least by me. And I'm certain people would pay for such a product so, where are the "plastic engine cleaning covers" for the alt, starter, and electrical boxes?
Personally, I think other UA-camrs and bloggers take cleaning an engine to the extreme. Covering these components isn't necessary if you don't use a pressure washer or a metal brush. Brushes with soft bristles and a regular garden hose will get the job done.
Some people believe you can't get the alternator or starter wet, which is nonsense because these parts get wet when it's raining outside.
@@TrickShiftGarage I hate to contradict you but you'd do well to keep any water far away from that alternator if you know what's good for you, If I wanted to own a car with the sensitive electrical parts (like the alt and starter) placed exactly right to ensure that the first puddle I drive through kills the car, I'd just buy a Ford. Nobody does a better job of that then Ford does.
How do you avoid getting them wet when it's pouring outside?
@@TrickShiftGarage If you bought the right car to begin with, the engineers and designers already worked out this problem so you shouldn't have to give it a single thought to driving in the rain. Personally I just try to avoid puddles deeper than my ankles, and once I quit driving around with the hood open that seems to have done the trick
The next time you drive in the rain, pop the hood and see how soaked your alternator is. You (and a lot of others) are making this wayyy too big of an issue. The issue isn't whether or not it gets wet. The issue is using high pressure (pressure washer or a hose with the stream setting on) or a brush that's very abrasive. Water alone will not ruin an alternator, starter or battery. These components have all been tested for years. They make sure the wires going to them have been properly insulated and properly grounded.
Again, you are thinking too much about this because of other UA-camrs claiming "You will ruin your engine if you don't cover these up." It's unnecessary if you use common sense.
Its not flammable....
I wouldn’t do this.
Why not?
Should have showed us how dirty your engine was before you sprayed it.
Yea, that's one thing I wish I would have done. I'd say it was pretty typical of how an engine bay looks for someone that never cleaned it in the 2 years of ownership.
a ford v8 save your money
What do you mean?
All that does is cover up the dirt , then it will attract more dirt and stick to it !! Pointless
That's not exactly true. It did remove some dirt from my engine. And now, months later, it doesn't look any different compared to how my engine looked before applying the tire foam. It's does work to a certain extent, but nothing will ever beat a good cleaning. This is just a quick way to make it look clean.
Can you use any type of tire foam cleaner?
I'm not 100% sure as I have not tested other tire foams.
@@TrickShiftGarage thanks
FIRST STEP: disconnect the battery!
Why?
It's elementary and known to ALL who possess a working mind.@@TrickShiftGarage
Obviously not. I just sprayed the tire foam on the engine. Did not scrub anything. Engines get soaked when it's raining all the time. So again, why would you disconnect the battery in this situation?
The bottom of an engine might get some water spray, but the engine does not get wet from rain, unless you're driving in the rain sans hood. Disconnecting the battery before doing ANY work under the hood is Gearhead 101.@@TrickShiftGarage
You don't think the engine gets wet when you drive in the rain? The next time you drive in the rain, pop your hood. Even with an engine cover, water goes everywhere. This is common sense 101.