Chevy Silverado center support bearing
Вставка
- Опубліковано 20 кві 2019
- thanks for watching!!!
If this video was helpful to you and if you would like to place a donation, here is my Venmo and PayPal information. Or I would really appreciate it if you could share my UA-cam channel on your social media. Links will be on the the bottom.
venmo.com/code?user_id=265066...
www.paypal.me/urbanautomotive - Авто та транспорт
The sound of speeded up tools is oddly satisfying
Hey man I never would've had the confidence to cut this bearing off without watching your video. I did it today and it went way better than I had anticipated. I cut within about a 1/16" of the axle with a grinder and a couple taps with a coal chisel cracked it right open! Much appreciation for you!!
Im glad it helped!
I always appreciate when people don't waste time in UA-cam videos... "Here's the garage my dad built in 1963..."
Thanks man
Glad it helped!
Thanks for showing us DIYers that it can be done without fancy presses. You made it look really easy and I now feel more confident about cutting it off.
Glad it helped!
Thanks
GOOD TO SEE TECH'S WHO KNOW HOW TO IMPROVISE . I DO THE SAME WHEN CERTAIN EQUIPMENT IS NOT AVAILABLE . GOOD JOB BUDDY 👍
Thank you!
Thank you for the video, it helped a great deal, especially cutting off the center support bearing, mine was totally trashed - first time using a grinder - thank you also to DE Walt - great tool.
Great video! Enjoy listening to the birds in the background, better than music!
It was so refreshing to see a tutorial without air tools!!! But I wish like hell I could move that fast!
Never replaced a carriage bearing before, followed this video, worked like a champ. Thamk you for this video
Glad it helped
This video helped me and my husband, 05 GMC Sierra. Thanks a lot!
Thumbs up. I am handy and was disappointed that I was going to have this done at a shop due to the lack of a press, but this video was great!
Bro,
Get a guard for the angle grinder
Before you wear the disc in your face
& eat soup for rest of your life.
Face guard too, PPE…all of it
Cheers,
Rob
Your video was awesome. Exactly what I needed for my 2002 1500HD. I tried pulling the old bearing with a bearing puller. After an hour of fighting it I gave up. Attacked it with my grinder. Worked like a charm. The bearing set with the 1 3/4 pipe was perfect. THANKS
Glad it helped!
Thank you for your time young man.
Glad it helped
Thanks for sharing this. It answered all my questions
Thank you! I did just what you showed me and it went perfect. TY TY
Thanks for the video. Helped out tremendously.
Thanks for the video. Literally just got done doing this. I even bought the exhaust pipe but the 12". Worked like a charm. My truck had been making a squealing noise for a year and was able to narrow it down to either u joints or the support bearing. So I bought all 3 u joints and the center support bearing. Pulled driveshaft and all my u joints were good. Bearing rubber was deteriorated and bearing itself felt a little wonky but not gritty like a typical bad bearing. But I replaced it and no more squealing so far. :)
Nice job!! Im glad theres an alternate when u dont have a press and puller.
About to have to do this to my 01 Sierra. Good informational video. Thanks
Glad it was useful
Hellyeah man definitely helped me out for sure thank you
Good job my friend
Great video!
Good job
Great info
Thank u sir u was helpful but i forgot to mark mine hopefully all works when i put it back together
Did it work even though you didnt mark it
I took mine apart and did the same thing forgot to mark, we need to know if it still worked!!!!
Good job taking the time to experiment and share your video, one thing I don't recommend is taking the guard off the grinder, when you do that you're putting your self at risk, you could cut yourself with the exposed area of the cut off wheel that goes toward your hands.
Especially for those who aren't familiar with grinders, it's better and safer to use a dremel with a cut off wheel its safer and smaller, It will not cut your drive line and or your fingers.. Good job tough.
Even 3years later ur video is helping however after I finished I realized I forgot to install this ring that goes on after you install the bearing mine was different and didn't have that cup
Best vid on UA-cam about this bearing good job man!
Glad it helped!
This video was very helpful, I liked your camera angles and visually detailed steps. I thought you could work on your monologue, articulating some of the 'hows' and 'whys' of what you're doing need a bit of work. Thanks for the helpful video.
Very helpful
Glad it was helpful!
I wish the shop I paid to have this done would have watched your video.. they mangled the new one and forgot to reinstall the cup when they installed it. Ended up doing this myself a few months later.
Why is the purpose of the cup?
Thank you
Neat. Thanks.
Very nice video.. got it thanks
Glad it helped
Thanks man very helpful!
Glad it helped!
Subbed JABO!!!
this was helpful
It was a pry bar
@@JaboTheMechanic thanks awesome video
looks like you could stand to lower the mounting position of that bearing some more?
Have you ever changed the bearing tbat supports the shaft on the back of the transmission
Wish i had seen this video before i replaced mine. I ended up cutting it off as you did.
I have 94 chevy silverado , extended cab, with a 3 part drive shaft, that's 7 feet long, the carrier barron is bad, need to see how you would install that one, so far ,every video I've watched , usa little different than mine, i haven't actually found my exact year stuck, only 91, 92, , the previous owner put posit traction in it!, And I believe that's what caused my carrier barron to come apart, so please help!!
seems like all auto parts are calling for the smaller diameter by default. Chances are if you have the 2500 you probably have the 40mm
Where did you find that piece of tubing?
Good tanks amigó
De nada amigo
2001 Chevy Silverado 2500HD My Allison 5 speed also has bolts for the universal up front and does not have the metal plate.
Can you provide the part# you used for the carrier bearing need the correct size
No need to mark the driveshaft, it only goes on one way. It has a double spline on it to line it back up
Good job man. ABOUT how long would u say it took you?
I subscribed for you.👍
35mins in total. Thank you for your support!
Nice video!! What year Silverado did you work on?
Thank you! It is a 2006
NVM.... saw in the comments below. Thanks for the video again.
@@dustinhart2269 no problem anytime! Glad it helped!
What Is the bearing that you use?
I am wondering why people do not put anti-seize where the bearing race attached
I guess because its too messy.
So mine didn't leak any tranny fluid?? Is that a bad sign?
Debes utilizar un extractor, asi dañas el Yoky.
I have a clunking and it seems to be coming from that center bearing. Would a bear bearing cause that or the u joints?
Thats from the u joints.
@@JaboTheMechanic Thank You.
You are welcome!
Cutting the race is a trick I have had to do on spindles that had welded races. An air powered cut off tool allows for a bit more precision. I'm about to rebuild the whole shaft on my 08 3500HD
I'm In the process of getting the rest of the parts to do this and all new unoints on my 05 duramax, on top of the rear differential assembley torn between swapping the internal from the new assembly to the existing or just putting the whole new assembly in
@@gravedipper Duramax store also offers a 1 piece shaft that eliminates the 2 piece design. I may do that in the future after my SAS
What do you do if the drive shaft wont disconnect in the middle? Ive put about a can of penetrating oil on it already and it will not budge...
Could you email a picture of it
You convinced me to take it to a shop where the have the correct tools to do the job.
Dumbest comment ever! 😂😂😂😂 he did a perfect job they have the same shit except having a press but he did the same out come! Sorry your stupid and can't do it yourself
Hey man I just replaced all 3 u joints and center bearing on my 03 Chevy Silverado 2500 HD and I put it all back correctly (I’m pretty sure) and I’m getting a vibration around 20-40 mph what could possibly be causing it?
If you accelerate from a stop and go do you feel a vibration. Also was the vibration there before replacing the u-joints
Did you put the drive shaft back together the same way it came apart? (Marked it before dis assembly)?
@johnchamberlin4791 yes I did
@@JaboTheMechanic What ended up causing the vibration?
@@JaboTheMechanic What ended up causing the vibration?
Mine didn’t come with the mounting block that goes above the center support,I’ve already been through 3 carrier bearings in a week
You need to make one. Is your truck lifted
It only has the torsion keys up halfway and the rear end is lowered 2”,I replaced the rear end and I decided to change the carrier bearing and it’s been messing up since
Torsion keys are halfway up and 2” drop shackles in the back,I changed my rear end out and went ahead and replaced the carrier bearing and it’s went through 3 since
Sometimes not aligned right. Do you feel a wobble after the new bearing
what pry tools were you using
You can get them from harbor freight
@@JaboTheMechanic thanks awesome video
What Brand is that support bro?
AutoZone
When you cut into the race it heated it up and allowed it to come free easier.
Is it the same as a 4x4?
Yes
Theres a master spline the 2 pieces only go on one way no point in marking them
Where did you buy the exhaust?
Autozone
@@JaboTheMechanic thank you
Dude your shaft between your legs is blue.. better see a doctor 😂😭
Ahahah. Good one
Really 4 ads in this video. Seriously. I hate ads. Boycott commercials.
🤦🏻♂️
1. Get a guard on that grinder.
2. Wear a face shield AND safety glasses. Ever seen a cutoff wheel come apart? It's not pretty.
You tube. Please stop doing so many ads. Hate comments incoming I imagine.
Slow down speedy lol
Too many damn ads
This is not a do it yourself job. Great video tho.
What year Chevy?
2005
They are all the same
Thank you so much. I've seen a few vids on this but yours gave me the most confidence
Mine doesnt have the plastic sleeve so I'm not sure how to remove the bearing. I'm at the point of no return because I already dropped the drive shaft
@@JEEPTHING881 could you email me some pictures so i can guide you through it
Um Zip tie....WRONG!!!!
If you are going to post an instructional video you should do it right.
He gets a pass
I payed 280$ for the same problem