How to Replace Driveshaft Center Bearing 1999-2006 Chevrolet Silverado 1500
Вставка
- Опубліковано 6 жов 2024
- Buy Now!
New Driveshaft Center Support Bearing from 1AAuto.com 1aau.to/ib/1ADS...
This video shows you how to install a driveshaft center support bearing on your 1999-2006 Chevrolet Silverado 1500.
This repair was done on a 2004 Chevrolet Silverado 1500 Base 4.3L Extended Cab Pickup 4-Door RWD Automatic and the process should be similar on the following vehicles:
1999 Chevrolet Silverado 1500
2000 Chevrolet Silverado 1500
2001 Chevrolet Silverado 1500
2002 Chevrolet Silverado 1500
2003 Chevrolet Silverado 1500
2004 Chevrolet Silverado 1500
2005 Chevrolet Silverado 1500
2006 Chevrolet Silverado 1500
Tools you will need:
• 11mm Socket 1aau.to/ocbR/1A...
• 14mm Socket 1aau.to/ocbR/1A...
• Cutoff Wheel 1aau.to/oaF/1AX...
• Grease Gun
• Air Chisel
• A Piece of Pipe (for leverage)
• Ratchet 1aau.to/occ4/1A...
• Socket Extensions 1aau.to/ocbR/1A...
• Anti-Seize Grease
• Brake Grease
• Brake Parts Cleaner
• Cloth Rags 1aau.to/oQE/1AX...
• Gloves 1aau.to/obc2/1A...
• Marker / Writing Utensil
• Safety Glasses
• Sandpaper
• Transmission Fluid
• Chisel 1aau.to/ons/1AX...
• Floor Jack 1aau.to/oaAA/1A...
• Large Hammer
• Pole Jack
• Wheel Chocks
• Wire Brush 1aau.to/oyS/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
This guy very professional with good vocalbulary
Thanks for this video helped me with the install. Didn't lose any trans fluid
Do they sell drive shafts with the bearing already on it so that it does not have to be removed from the original one?
1-1/4 inch pipe and one cap.
Home Depot did not carry.
Lowes had it in store.
Galvanized Cap 1-1/4-in Galvanized Cap
Southland Galvanized Pipe 1-1/4-in x 24 in 150 PSI
is there a name for that rear draft seal? i know theres a pinion seal i need to replace but thats by the u joint. Are they the same?
What is the name of the seal you recommended replacing at 5:07?
What happens if I forget to put the expander in?
The carrier bearing my friend got does not come with a spacer. Can it still be used?
@10:35 sus 😅😅