Розмір відео: 1280 X 720853 X 480640 X 360
Показувати елементи керування програвачем
Автоматичне відтворення
Автоповтор
Let me know what you think!
Take it to machine shop have it squared decked and have the heads reworked unless everything is cracked
Pistons are junk there hp not worth anything 😊
I like his content because he's a normal guy workin out of his house like the rest of us... Raw and unedited
You got a great deal! Get two used intake valves , hand lap them in and send it!
If your looking for 243 casting #, some trucks 05 ^ also have them. Great video as always man.
I bought my 5.3 ls for 40 bucks it runs perfect I swapped it in a 1980 c10
Im jealous
Send it….$200 well spent buddy!!!
Money well spent 👍👍
That sux brother!!! Wiggling the rockers would have clued you in to potentially bent valves. Not a 100% way, but those 2 valves were way down lol.
Very informative video. Sucks about the heads.
2 used valves off of ebay and yer back in business...run it!
Ya. The bad head will probably be the parts head and i'll just find another cheap set of 243's
Not original springs and bent valves but pushrods are good...I'm guessing 2 springs broke. Why replace with valves bent?
Were the valve springs bad on the pistons that got hit ? Possibly slack/slop in the connecting rods or wrist pins on those cyls.
I think something happened with the valve springs and thats why all the valve springs on them now look brand new.
The whole keep parts in same place would be mainly on flat tappet cams, I mix up the roller cam parts myself
I like to pretend im Ray Charles when I put stuff back together
Is it possible to buy 2 stock valves and just lap them in? Do they come precut from the factory?
When you show up, offer another $100 if it spins good
Possible valve float at 100k RPMs lol. Bouncing the valves off the seats. If it didn't jump timing.
100% agree!
💯🔥
Send it!! 😅
Question I put 5.3. 2008 gmc in my mc ss and the amzon injector wires are not going on. What's the solution
@antonioware7656 if its a Gen 4 engine. The Amazon harnesses won't work. They're for Gen 3 engines.
Ok what will I have to do buy some gen 4. Do they have those on Amazon
What harness is used for gen for
4
Can yu use gen 3 injectors on gen 4
317 heads have the same valves just swap them out no problem
@@deetrainone106 good to know. I have some 317 heads in the attic
@krustyclassicsgarage did you just make a slave reference…smdh
@MidwestToolReview You know hanging was a form of punishment for everyone right?
@@krustyclassicsgarage yes it was and the word slave is from the slovak people…..people need to quit being such pussi3s and man up… it 2024 already get over it!!!
37:28
Sus
Let me know what you think!
Take it to machine shop have it squared decked and have the heads reworked unless everything is cracked
Pistons are junk there hp not worth anything 😊
I like his content because he's a normal guy workin out of his house like the rest of us... Raw and unedited
You got a great deal! Get two used intake valves
, hand lap them in and send it!
If your looking for 243 casting #, some trucks 05 ^ also have them. Great video as always man.
I bought my 5.3 ls for 40 bucks it runs perfect I swapped it in a 1980 c10
Im jealous
Send it….$200 well spent buddy!!!
Money well spent 👍👍
That sux brother!!! Wiggling the rockers would have clued you in to potentially bent valves. Not a 100% way, but those 2 valves were way down lol.
Very informative video. Sucks about the heads.
2 used valves off of ebay and yer back in business...run it!
Ya. The bad head will probably be the parts head and i'll just find another cheap set of 243's
Not original springs and bent valves but pushrods are good...I'm guessing 2 springs broke. Why replace with valves bent?
Were the valve springs bad on the pistons that got hit ? Possibly slack/slop in the connecting rods or wrist pins on those cyls.
I think something happened with the valve springs and thats why all the valve springs on them now look brand new.
The whole keep parts in same place would be mainly on flat tappet cams, I mix up the roller cam parts myself
I like to pretend im Ray Charles when I put stuff back together
Is it possible to buy 2 stock valves and just lap them in? Do they come precut from the factory?
When you show up, offer another $100 if it spins good
Possible valve float at 100k RPMs lol. Bouncing the valves off the seats. If it didn't jump timing.
100% agree!
💯🔥
Send it!! 😅
Question I put 5.3. 2008 gmc in my mc ss and the amzon injector wires are not going on. What's the solution
@antonioware7656 if its a Gen 4 engine. The Amazon harnesses won't work. They're for Gen 3 engines.
Ok what will I have to do buy some gen 4. Do they have those on Amazon
What harness is used for gen for
4
Can yu use gen 3 injectors on gen 4
317 heads have the same valves just swap them out no problem
@@deetrainone106 good to know. I have some 317 heads in the attic
@krustyclassicsgarage did you just make a slave reference…smdh
@MidwestToolReview You know hanging was a form of punishment for everyone right?
@@krustyclassicsgarage yes it was and the word slave is from the slovak people…..people need to quit being such pussi3s and man up… it 2024 already get over it!!!
37:28
Sus