Hi i have also installed the Termignoni system with the UPMAP 800 on my 2018 V4. Unfortunately Termi do not have a map with this D200 exhaust so they recommend downloading the full Akra map. Got to advice my bike really goes well and I'm very happy. Cannot though give numbers but riding it seems great.
The description says WSBK exhaust, but it looks like the exhaust used in BSB because of noise regs in the UK..... The Aruba factory team and Go Eleven both use Akras. Great build videos.
The exhaust we're using is the WSBK system and considerably beyond the BSB noise limit. It's the same as used on Team Motocorsa Racing Ducati ridden by Leandro Mercado. The version you're referring has much larger silencers, which is an easy way to differentiate the two visually.
Absolutely beautiful system which really compliments the bike. Can't wait to hear it. How would you rate the volume level on this compared to the full Akra system with baffles out? To me, the full Akra sounds very aggressive, but not so loud that it's completely beyond obnoxious. BTW, there's a *definite* need for a version of this which fits the V4S Streetfighter! We can only hope.
I want that Carbon frame and swingarm for my V4 Streetfighter and whatever else you want to throw on it 😅 possibly the Cordova quick shifter. Dang that thing is insane
At 17:33 you show the front headers, which are much shorter than the ones on the system Termi are selling which is D19510200TNT. The system in your video has part numbers on it (D1851022IT), so my obvious question is did you buy this through their race department as it is clearly different to what is on their website. You also have "Reparto Corse" etched onto some of the pipework, again that is not on the commercial system and finally the Termi logos on the silencers (26:09) are much bigger than the ones on D19510200TNT. The commercial system uses much longer front titanium headers than yours that connect to the horizontal under engine pipe with springs, much lower down, near the front of the sump. What is the part number for your system, as it is clearly not the same?
@@SuperbikeUnlimited no I'm in the UK and your video is the only one that shows the install in any real detail. I am just confused as to why your headers are different as explained in my previous comment since on the system D19510200TNT Termi sell commercially, they are not like yours for the WSBK D200 system as front headers are longer and attach further down to the horizontal link pipe.
Hey off the topic. Maybe you guys can help me out and give me an answer. A customer of mine with a 2020 V4 bought the Termi slip ons which came with the upmap T800 unit and airfilter. After 6 months he is selling the Termi slip ons but is keeping the upmap and air filter. He wants the SC Project CR-T titanium undertail half system. But he wants to keep his Upmap T800 and air filter. I emailed UPmap asking about a map for his set up. And havent heard back. I did find an Upmap map for the CRT undertail full system. Do you think he would be able to use the map for the full CRT undertail exhaust with the half system? The reason I ask is because another customer with a V4R bought the SC Project S1GP full system. And Upmap told him they didnt have a map for that exhaust. In the meantime he was told to use the Termi 4 UCITE upmap map until the sc project s1gp came out. After 3-4 weeks Upmap released the S1GP map.
hi bro so why do u change the Spark exhaust ? By the way a guy send me a pic of this bike with this spark on it...damn the world is tiny... With love from Paris
hi ok bro it's to be concording to the wsbk rules i guess or for a better data things , in my case i'm about to take off this lambda sensors N the ugly catalyst N the OEM filter with the help of the Termigoni Up Map T800 www.up-map.it/en/upmap-t800-ducati-panigale-v4-d184-2018/ this one but with the cheapest Exhaust lol that i have found do Brazil this CS Racing shit www.ebay.fr/itm/2018-20-Ducati-Panigale-V4-V4S-CS-Racing-Slip-on-Muffler-Exhaust-Video-Available/153941865653?hash=item23d7a674b5:g:m~kAAOSw6atextr3 with replica AKRAPOVIC fairings then wrapping it's gonna be dope With love from Paris i sucribe bro
HI! Impressive build.Compare to the "old style" equel length sytem,this 4:2:1:2 unequel length in the end, where add more power? Have You a dyno run to this system?
Can you tell me what the listed part number is for your Termi exhaust system as it is not the same as the commercially available one on your website. The front headers on your bike are different for starters. I would really like to know where you got this specific version. please see my previous question about the differences.
@@SuperbikeUnlimited Can you please tell me the part number of the system you ordered for your bike, as I said it is NOT the same as the commercially avaialble one as the headers on your project bike (front ones) are not the same. On the commercial version they are longer.
@@topolino65 Rod, we’re happy to supply you with this exhaust. If you’re asking to make arrangements to purchase it elsewhere, it would be best to deal with that entity.
In the description it says "Front header tube set not supplied (the Termignoni system has to be installed with the standard parts)" Can you explain what that means? Are any stock parts from the stock exhaust still being used?
@@SuperbikeUnlimited its on the Brocks Performance website. It says the same thing for the stainless and full titanium system. Look at the 4th paragraph. brocksperformance.com/termignoni-stainless-full-system-panigale-v4-r-s-speciale-18-21/ But on Termis website it doesnt say that. If you are saying that it comes with everything. Ill contact Brocks and let them know there is a mistake in the description since I need place some orders for customers.
Pretty incredible how far technology has come. That pipe would have been a 1 off custom built piece just a few years ago. Exciting project for sure.
This build is insane. Love seeing all this bike bling👌
Hi i have also installed the Termignoni system with the UPMAP 800 on my 2018 V4. Unfortunately Termi do not have a map with this D200 exhaust so they recommend downloading the full Akra map. Got to advice my bike really goes well and I'm very happy. Cannot though give numbers but riding it seems great.
So cool being able to see a Superbike in this much detail. Great series!
I’m drooling over here. Really makes me wanna build another Superbike.
The Joy's of a new build. Keep up the great work team and thanks for posting. It's a rare insight into a high end build. 👊👍
Thanks! 👊
The description says WSBK exhaust, but it looks like the exhaust used in BSB because of noise regs in the UK..... The Aruba factory team and Go Eleven both use Akras. Great build videos.
The exhaust we're using is the WSBK system and considerably beyond the BSB noise limit. It's the same as used on Team Motocorsa Racing Ducati ridden by Leandro Mercado. The version you're referring has much larger silencers, which is an easy way to differentiate the two visually.
You are absolutely right. Forgot about Mercado. Looking forward to see what the bike outa out.
Absolutely beautiful system which really compliments the bike. Can't wait to hear it.
How would you rate the volume level on this compared to the full Akra system with baffles out? To me, the full Akra sounds very aggressive, but not so loud that it's completely beyond obnoxious.
BTW, there's a *definite* need for a version of this which fits the V4S Streetfighter! We can only hope.
JESUS just that radiator is $4800 and the motec kit is $17,100😱😱 just the rearsets and exhaust cost more than my nearly fully modded R1 with 11k miles
I want that Carbon frame and swingarm for my V4 Streetfighter and whatever else you want to throw on it 😅 possibly the Cordova quick shifter. Dang that thing is insane
yes
This stuff is impressive, you have my attention on this build for sure.
Can you tell me how many power that came from this exhaust (sorry bad english)
Next video!
Linda,mais se por a mão dá problema 🤷
Excellent content. Looking forward to the next video.
At 17:33 you show the front headers, which are much shorter than the ones on the system Termi are selling which is D19510200TNT. The system in your video has part numbers on it (D1851022IT), so my obvious question is did you buy this through their race department as it is clearly different to what is on their website. You also have "Reparto Corse" etched onto some of the pipework, again that is not on the commercial system and finally the Termi logos on the silencers (26:09) are much bigger than the ones on D19510200TNT. The commercial system uses much longer front titanium headers than yours that connect to the horizontal under engine pipe with springs, much lower down, near the front of the sump. What is the part number for your system, as it is clearly not the same?
Hi Rod, if you are requesting to order the exhaust, the link is in our description for this video.
@@SuperbikeUnlimited no I'm in the UK and your video is the only one that shows the install in any real detail. I am just confused as to why your headers are different as explained in my previous comment since on the system D19510200TNT Termi sell commercially, they are not like yours for the WSBK D200 system as front headers are longer and attach further down to the horizontal link pipe.
Hey off the topic. Maybe you guys can help me out and give me an answer. A customer of mine with a 2020 V4 bought the Termi slip ons which came with the upmap T800 unit and airfilter. After 6 months he is selling the Termi slip ons but is keeping the upmap and air filter. He wants the SC Project CR-T titanium undertail half system. But he wants to keep his Upmap T800 and air filter. I emailed UPmap asking about a map for his set up. And havent heard back. I did find an Upmap map for the CRT undertail full system. Do you think he would be able to use the map for the full CRT undertail exhaust with the half system? The reason I ask is because another customer with a V4R bought the SC Project S1GP full system. And Upmap told him they didnt have a map for that exhaust. In the meantime he was told to use the Termi 4 UCITE upmap map until the sc project s1gp came out. After 3-4 weeks Upmap released the S1GP map.
This is epic footage. 👌🏾
So much of a teaser.... We need noise. Great looking build so far.
Soon!
Subbed in an instant,thank you for documenting.
hi bro so why do u change the Spark exhaust ?
By the way a guy send me a pic of this bike with this spark on it...damn the world is tiny...
With love from Paris
We wanted a full WSBK exhaust with lambda support on each collector.
hi ok bro it's to be concording to the wsbk rules i guess or for a better data things , in my case i'm about to take off this lambda sensors N the ugly catalyst N the OEM filter with the help of the Termigoni Up Map T800
www.up-map.it/en/upmap-t800-ducati-panigale-v4-d184-2018/
this one but with the cheapest Exhaust lol that i have found do Brazil this CS Racing shit www.ebay.fr/itm/2018-20-Ducati-Panigale-V4-V4S-CS-Racing-Slip-on-Muffler-Exhaust-Video-Available/153941865653?hash=item23d7a674b5:g:m~kAAOSw6atextr3
with replica AKRAPOVIC fairings then wrapping it's gonna be dope
With love from Paris i sucribe bro
Dream garage,dream bikes dream work 👍💪🤙🤟🏍🏍🏍🏍
HI! Impressive build.Compare to the "old style" equel length sytem,this 4:2:1:2 unequel length in the end, where add more power? Have You a dyno run to this system?
so why motec and not magnetti marelli? sorry if I mispelled that but you get it.
We very much like MoTeC, it's also far more cost effective and we are able to offer it to anyone.
is this a good starter bike?
Sure! Give us a ring and we’ll sell it to you.
Can u guys get front wheel spacers for oz wheel 11-15 zx10r?
How much does this build cost???
That Termi is mean as.
Can you tell me what the listed part number is for your Termi exhaust system as it is not the same as the commercially available one on your website. The front headers on your bike are different for starters. I would really like to know where you got this specific version. please see my previous question about the differences.
Hi Rod, we ship worldwide should you like to order one.
@@SuperbikeUnlimited Can you please tell me the part number of the system you ordered for your bike, as I said it is NOT the same as the commercially avaialble one as the headers on your project bike (front ones) are not the same. On the commercial version they are longer.
@@topolino65 Rod, we’re happy to supply you with this exhaust. If you’re asking to make arrangements to purchase it elsewhere, it would be best to deal with that entity.
Why ducati's exhaust systems are twice the price of others
Even rsv4 is 2300$ for akra titanium
But ducati v4 is 5000$
Why is it
its a exotic bike i guess. money pit.
No gloves to prevent hand and finger oils from adhering to the exhaust?
We will generally wipe them down with alcohol, but truthfully the type of use that we get out of these, it doesn't matter after several events anyway.
Is it weird that i find this bike sexy? So frigging nice!
If I were to bring you a new V4R how much would all of this cost to do?
You can click the links in the description to price some of our parts.
The exhaust isn't road legal right?
Any exhaust that modifies or removes emissions components is not road legal.
@@SuperbikeUnlimited Thanks for always replying to my questions! :D
In the description it says "Front header tube set not supplied (the Termignoni system has to be installed with the standard parts)" Can you explain what that means? Are any stock parts from the stock exhaust still being used?
Where are you seeing that? Certainly not for the systems on our website.
@@SuperbikeUnlimited its on the Brocks Performance website. It says the same thing for the stainless and full titanium system. Look at the 4th paragraph. brocksperformance.com/termignoni-stainless-full-system-panigale-v4-r-s-speciale-18-21/ But on Termis website it doesnt say that. If you are saying that it comes with everything. Ill contact Brocks and let them know there is a mistake in the description since I need place some orders for customers.
@@rockheadbikes1675 Not the same exhaust.
Please put the camera on a tri pod and use both hands. I’m excited to see the cool stuff but I’m feeling like I’m going to throw up.
мотор от ЗАЗа ?
Budget: $999999999999999999
Um, these things aren’t wireless? What a joke.