Helpful???? Essential is more like it. Great video, I am almost done with the install. Will finish it up tomorrow! The Termignoni instructions were not good.
Couldn't have done this without your video. I installed this on my SP2 this past weekend. Hardest part was removing the stock exhaust...it took me over 3 hours! It just wouldn't budge. Finally, I removed the stock exhaust covers so I could get more access and grip on it and sprayed some WD40 on right side. From there I just wiggled it loose. Second hardest part was the 32:05 mark of your video. I had to bolt the middle piece first, then attached the pipe to the header. I started at 730am and got done around 3pm. I also installed the Sprint Air Filter and did the UpMap. The Termi sounds beastly! And it looks so sleek on the bike compared to the Akra. Saved over $3K, and saved another $650 I would have had to spend on the installation. Thanks for your incredible video tutorial!
Super great video. I put you on the tv in the garage and did this install this weekend. The instructions that came from Termignoni were not the best, so I couldn't have done it without this video. Thanks for taking the time to make this.
dude!!! i am soooo thankful for you doing this video! i just bought 2022 Streetfighter V4S in dark stealth and bought the same exhaust for my bike. i really am going to use this the entire time i install mine. the detail you put into each step and talking about why you are doing certain things is just exceptional. thank you and Bravo
This is the most complete install. Couldn't have done it myself without your vid. I notice you say the longer M8 bolt goes in the left side but the instructions I received say the longer bolt goes in the right side, and the two shorter ones go on the left.
I remember watching your video's, before you wrecked your R1. I see that you got a V4S, same thing I did.. R1 to a V4S. Appreciate your video's, you are a straight up dude.
I miss Cali man, I used to live in San Diego I used to go to Palomar mountain and Mulholland drive every other weekend, knee down for hours. You got my dream bike I should have one next year. Cheers!
It's great for riding but everything else is going downhill lol. Mulholland snake is closed too, didnt know if you knew. Bummer! Hope you get your Panigale next year!
Looking good. I bought the same set up with the Sprint filter. Havent installed yet but I also moved to the T800 Map...cant wait to install mine as well
What made you go with the Termignoni instead of the Akrapovič? When ordering the Ducati they have Akrapovič for the race pipe upgrades... just curious, thanks man.
Thank you for the props! Umm yeah i would say its atleast a couple hour job. Longest part is getting the stock muffler off. I definitely did some time lapsing in the video. I'd say it was atleast an hour just knocking the stock muffler out.
right now, my v4s when in neutral only 2 cylinders are running.when i put in gear all 4 are running as im sure you know. does that change once the bike is flashed?
@@marcusbarnes5929I have this system on a 2020 v4 with the UpMap for the 2020 year and it will still cut ignition to two of the cylinders at extended idle
I noticed the exhaust got significantly louder on day two after a few rides. Did you experience the same thing? It was perfect on day one and now I feel like it’s too loud.
By any chance do you know what dBA noise emissions you get at 6k RPM? Some UK tracks are now limiting static noise tests to 102 dBA at 6k RPM for a 4 cylinder bike, not sure if the Termi slip-ons will achieve this even with baffles. Thanks
Hello, I have the same ones on my panigale v4, and I must say that they make a lot of noise, I’m considering buying a catalyst but would you have the size of the diameter of the fitting?
I have a 2022 Euro5 SFV4S, I tried the D199 Termignoni pipe but performance was flat - which Upmap map code did you use? Did you try the Torquemap and what results on power/torque?
You have any issue with quickshift? A tad laggy for mine right after the flash. Read about the potential need to recalibrate the tire. Any advice? Thanks and great video!
Hello MotoVice, I been watching your videos and they're great! Wanted to ask you, now that you have been riding this exhaust for a year what is your opinion on it?
In my 2022 V4S, there's about a millimeter gap between the left down tube and the right exhaust. In your video, you caution to not tighten the bolt on the right side to install the left side because of the close quarters...but even after the install, there's about one or two millimeters gap. Is that what you have too?
Motovice! Love your videos. Waiting for my 22 v4s to come in. Was wondering when you ordered from bellissimoto how long it took to ship and did you have to tell them in the order description it was a 22 for the upmap or will the 21 will work?
It takes them roughly 2-3 weeks to get Termignoni Exhausts and Up-Map units when they are out of stock, and yes definitely say you have a 2022 V4S in the notes, just to be sure you get the correct version.
Looks sick! Any problems with ground clearance? I have this on order for my SFV4 but am a little concerned after reading reports of scraping the exhaust
The akra was designed in partnership with Ducati. I don’t know if it’s necessarily better or worse. I personally like the black cans of the termi and the 4ucite termi is an insane system. That would probably have been the one if money wasn’t an issue. I’ve heard it in person and it’s nuts.
hey, did you have issues like idling alot and stalling after installing this map? i do have these issues. How can i fix it if you have any suggestions, thanks
@@MotoViceOfficial Someone commented on a forum post i made asking about this exact same thing and they mentioned to double-check removing the 02 sensors, do we need to do that? My bike runs terrible... I am considering a different (custom) tune if it keeps up. Thoughts?
Hi, nice job, in Ducati for the same job they make me pay 2 hours of labor .... thieves !! I was wondering did you leave the catalyst exhaust valve motor mounted but with the cables removed, do you have the engine warning light turned on like this, or does the ECU see that the motor is there but does not notice that the cables are disconnected? Does the UPMAP 800 remapping the ECU erase the error of the control unit not finding the valve so can the motor be removed to save weight? Did you then mount an ESE, Exhaust valve exclusion, Healtech type together with the ECU remapping? In the end, did you keep the scooter on or did you remove it? Thanks for any info about it. Congratulations again. Hi Stefano .
Hi, awesome vid :) I have 2022 SF V4S and I am thinking of Termignoni as well. Since Panigale and SF have similar if not same engine, what are your thoughts now? is it worth it? Is the power gain and weight save noticeable? I have seen some SF Termignoni vids but I can not make out too much of a difference in video as far as sound goes. Does it pop as well if u let off throttle?
19 horsepower more just by changing slip ons and upmap?? realy? Did you dyno check that, sorry but I dont believe that. Thats panigale v4r with full Acrapovic.
This was a long video! Hope it was helpful for anyone doing this install!
Very. Thank you!
Much appreciated!
The longer the better amazing video
I would love to install this on my V4s. But unfortunately I live in Switzerland 🇨🇭 Maximum DB is 92
Helpful???? Essential is more like it. Great video, I am almost done with the install. Will finish it up tomorrow! The Termignoni instructions were not good.
Couldn't have done this without your video. I installed this on my SP2 this past weekend. Hardest part was removing the stock exhaust...it took me over 3 hours! It just wouldn't budge. Finally, I removed the stock exhaust covers so I could get more access and grip on it and sprayed some WD40 on right side. From there I just wiggled it loose. Second hardest part was the 32:05 mark of your video. I had to bolt the middle piece first, then attached the pipe to the header. I started at 730am and got done around 3pm. I also installed the Sprint Air Filter and did the UpMap. The Termi sounds beastly! And it looks so sleek on the bike compared to the Akra. Saved over $3K, and saved another $650 I would have had to spend on the installation. Thanks for your incredible video tutorial!
Super great video. I put you on the tv in the garage and did this install this weekend. The instructions that came from Termignoni were not the best, so I couldn't have done it without this video. Thanks for taking the time to make this.
dude!!! i am soooo thankful for you doing this video! i just bought 2022 Streetfighter V4S in dark stealth and bought the same exhaust for my bike. i really am going to use this the entire time i install mine. the detail you put into each step and talking about why you are doing certain things is just exceptional. thank you and Bravo
You got it! I know its a long video but I wanted to cover each step in case someone got as lost as I did. The manuals are terrible!!!!
This is the most complete install. Couldn't have done it myself without your vid. I notice you say the longer M8 bolt goes in the left side but the instructions I received say the longer bolt goes in the right side, and the two shorter ones go on the left.
I have these on my 21 SP and I love them. I also removed the db-killers and truly can't get enough of the sound.
Sounds so good!
Wow, love the determination to completing the task. I haven't seen this particular exhaust, looks amazing!
Thank you! Love this exhaust. Nothing too big and obnoxious like the 4uscite and sounds great!
I remember watching your video's, before you wrecked your R1. I see that you got a V4S, same thing I did.. R1 to a V4S. Appreciate your video's, you are a straight up dude.
I installed mine following your step by step instructions. Thank you so much
Great video u showed all the details to be done . thinking of getting the same bike next year .keep the videos coming .sound
Thank you! Lots of little details that could be missed. Your going to love it!
Excellent video bro! It sounds great now! Thank you for taking the time for step by step instructions... be safe out there.
I miss Cali man, I used to live in San Diego I used to go to Palomar mountain and Mulholland drive every other weekend, knee down for hours. You got my dream bike I should have one next year. Cheers!
It's great for riding but everything else is going downhill lol. Mulholland snake is closed too, didnt know if you knew. Bummer! Hope you get your Panigale next year!
@@MotoViceOfficial Totally. The leftists takeover is driving this beautiful state to the ground. Sad.
Great narration giving clear step by step process. The end fitted result look 👌
I actually love the stock sound irl ❤
Looking good. I bought the same set up with the Sprint filter. Havent installed yet but I also moved to the T800 Map...cant wait to install mine as well
Thank you! It’s such a nice system. I just launched the filter video and the map video is next!
What made you go with the Termignoni instead of the Akrapovič? When ordering the Ducati they have Akrapovič for the race pipe upgrades... just curious, thanks man.
Good job, definitely sounds better.
Thank you! Mics never do it justice haha
The assembly time of the exhaust alone without distractions would be about 3 hours? Excellent video, very professional with the work.
Thank you for the props! Umm yeah i would say its atleast a couple hour job. Longest part is getting the stock muffler off. I definitely did some time lapsing in the video. I'd say it was atleast an hour just knocking the stock muffler out.
Very similar to my 21 streetfighter...
Nice video.
Very nice! Thank you!
Did you have to change the belly pan? Thank you
did you put a servo buddy when you removed the servo motor ?
right now, my v4s when in neutral only 2 cylinders are running.when i put in gear all 4 are running as im sure you know. does that change once the bike is flashed?
I would also like to know after flashing with the up map does it idle on all 4 cylinder instead of just 2 cylinders..
@@marcusbarnes5929 just 2 ..
@@marcusbarnes5929I have this system on a 2020 v4 with the UpMap for the 2020 year and it will still cut ignition to two of the cylinders at extended idle
I am currently in the middle of this install. The removal is wearing me out. Great vid.
Glad it helped. Removal was terrible!!!!!
Nice, these Termi's look so good against the black V4s highlight.
They so do!
I noticed the exhaust got significantly louder on day two after a few rides. Did you experience the same thing? It was perfect on day one and now I feel like it’s too loud.
Loved your footage very thorough.
Thank you!!
Is this exhaust system compatible with the V4SP2 as well?
I believe so!
@@MotoViceOfficial Cool!
Best one so far that's what I'm getting, does this system delete the cat?
By any chance do you know what dBA noise emissions you get at 6k RPM? Some UK tracks are now limiting static noise tests to 102 dBA at 6k RPM for a 4 cylinder bike, not sure if the Termi slip-ons will achieve this even with baffles. Thanks
I received my Termignoni for my 2021 Monster 937, do you know by any chance which UpMap I should buy and from where?
appreciate it
I would check upmaps website and they will show all the maps available. I would assume they have one for that bike since its so popular.
Does the bike with this exhaust keeps the warranty like with the akrapovic or not???
Hello, I have the same ones on my panigale v4, and I must say that they make a lot of noise, I’m considering buying a catalyst but would you have the size of the diameter of the fitting?
i was wondering the ground clearance at the left side exhaust is somehow low
Honeslty the stock exhaust was lower!
Absolutely beautiful ❤️
I have a 2022 Euro5 SFV4S, I tried the D199 Termignoni pipe but performance was flat - which Upmap map code did you use? Did you try the Torquemap and what results on power/torque?
Excellent job brother 🙏🏻
Thank you l!
Great video 👍 thank you for posting this.
You have any issue with quickshift? A tad laggy for mine right after the flash. Read about the potential need to recalibrate the tire. Any advice? Thanks and great video!
Do you have a link to buy the termi slip ons? Do they come with the upmap?
Yes the link is in the description. Bellissimoto can get them quickly!
@@MotoViceOfficial Did it come with the upmap or do you have to buy that separately?
Top Video.
Best Greetings from Germany
Hi do you get pops on the upshifts after installing this? curranty looking at exhausts for my V4s and this is looks ace.
Hello MotoVice, I been watching your videos and they're great! Wanted to ask you, now that you have been riding this exhaust for a year what is your opinion on it?
Thanks for making this. Super useful!
Glad it was helpful!
In my 2022 V4S, there's about a millimeter gap between the left down tube and the right exhaust. In your video, you caution to not tighten the bolt on the right side to install the left side because of the close quarters...but even after the install, there's about one or two millimeters gap. Is that what you have too?
Just a little bit a wiggling and retighting and you will be set.
Motovice! Love your videos. Waiting for my 22 v4s to come in. Was wondering when you ordered from bellissimoto how long it took to ship and did you have to tell them in the order description it was a 22 for the upmap or will the 21 will work?
It takes them roughly 2-3 weeks to get Termignoni Exhausts and Up-Map units when they are out of stock, and yes definitely say you have a 2022 V4S in the notes, just to be sure you get the correct version.
Looks sick! Any problems with ground clearance? I have this on order for my SFV4 but am a little concerned after reading reports of scraping the exhaust
Not at all. The stock exhaust actually sat lower i think.
Do you have a start up with the baffles in?
I dont im sorry. I did see another video though and the sound difference is so minor, they dont do much.
@@MotoViceOfficial All good man, keep up the vids! Pick my base up next week in aus thanks
So if money is not the determining factor is the Akra a better system, worth the price? why the Termi? Thank you great video man..
The akra was designed in partnership with Ducati. I don’t know if it’s necessarily better or worse. I personally like the black cans of the termi and the 4ucite termi is an insane system. That would probably have been the one if money wasn’t an issue. I’ve heard it in person and it’s nuts.
@@MotoViceOfficial i dont think it would fit tho, 2022 front headers are different than 2021
Love your channel bud, I just have one question do you need to install a servo buddy with that slip on?
hey, did you have issues like idling alot and stalling after installing this map? i do have these issues. How can i fix it if you have any suggestions, thanks
Yep. Termi's maps for this bike are not great. I had idle issues too. They worked out a little bit after time but only when the bike warmed up.
@@MotoViceOfficial Someone commented on a forum post i made asking about this exact same thing and they mentioned to double-check removing the 02 sensors, do we need to do that? My bike runs terrible... I am considering a different (custom) tune if it keeps up. Thoughts?
This works for the panigale v2 ??
Anyone have a baffle I can purchase? Seems most don’t run them, I lost one and need. Thanks
La garantie ne fonctionne pas ?
What is you plate locator name
It’s linked in the description. It’s the NRC tail tidy.
How difficult was DB Killer removal? Easy to re-install?
Super easy!
@@MotoViceOfficial cool. I’ve read that some exhausts have them permanently installed so you have to drill etc
@@hypnodic01 Nope i showed it in the video, simple allen bolt removal and your good!
This video was very very helpful 👌🏼👌🏼👌🏼👍🏽👍🏽👍🏽
Hi, nice job, in Ducati for the same job they make me pay 2 hours of labor .... thieves !!
I was wondering did you leave the catalyst exhaust valve motor mounted but with the cables removed, do you have the engine warning light turned on like this, or does the ECU see that the motor is there but does not notice that the cables are disconnected?
Does the UPMAP 800 remapping the ECU erase the error of the control unit not finding the valve so can the motor be removed to save weight?
Did you then mount an ESE, Exhaust valve exclusion, Healtech type together with the ECU remapping?
In the end, did you keep the scooter on or did you remove it?
Thanks for any info about it. Congratulations again. Hi Stefano .
The bike will know if the Servo is removed or the cables not working properly to close the servo. The upmap removes the codes and you are good to go!
@@MotoViceOfficialdid you tape over the servo connector to protect from moisture and zip tie it back of the way?
Tight! Good work. Any reason you don’t squirt squirt some WD-40 on the exhaust connectors to lube it up and aid in removal?
I think I showed it on the horizontal joint to the header. I didnt think of it until i got to that part haha
Did you order the euro 4 or 5 version ? Heard some exhaust brands weld baffles for euro 5
Termi's always are removable. Euro 5 has been out for years so no worries there. Just makes sure to get the euro 5 upmap if you have a 2022.
@@MotoViceOfficial awesome thanks for replying
Hi
You’ve got 19 horsepower power +
Have you put the bike on the dyno
I’ve got the same exhaust
I was wondering how much you get?
Uf best looking exhaust for pani!!
Hands down!
Best choice!
Awesome sound！
Thank you!
Your video is amazing
Oh, I have a question for you, sir. If I install termignoni exhaust myself on my Ducati and upmap it, is it going to avoid the warranty?
So I spoke to my local service department and as long as its done right and doesnt damage anything in the process it doesn't void your warranty.
@@MotoViceOfficial thank you so much. You’re the best, my friend.
@@MotoViceOfficial Thank you so much
how many Nm did you tighten the nuts?
Real snug thats it.
Hi, awesome vid :) I have 2022 SF V4S and I am thinking of Termignoni as well. Since Panigale and SF have similar if not same engine, what are your thoughts now? is it worth it? Is the power gain and weight save noticeable? I have seen some SF Termignoni vids but I can not make out too much of a difference in video as far as sound goes. Does it pop as well if u let off throttle?
No pops unfortunately. I think its due to how long and the shape of the headers. Power is ferocious. Power wheelies all day!
Great video. ive just got the same bike and deciding on mods :)
Well hope this videos help!
Great video, must have been hard work.
Thank you! I definitely time lapsed the hammering of the cat. It took me at least 2 hours to get it off.
Are these slip ons ?
Video perfetto 👍✋
Thank you!
How many decibel?
Didnt get a reading. Sorry!
shoulda added the upmap video too..
The Upmap video was posted right after!
@@MotoViceOfficial yes, I watched it. Thank you for doing that. It helped a lot
Love the look but the Termi logo kind of ruins it. Sounds great too. Great job!
Where is motovice!!! Need more content!!!
map ?😊
Awesome job! ❤ the bike- so hot!
Thank you!
Put it into 1st gear and all 4 Valves will open and its gets soo much deeper and Throaty
Good 👍
19 horsepower more just by changing slip ons and upmap?? realy? Did you dyno check that, sorry but I dont believe that. Thats panigale v4r with full Acrapovic.
hahha come on 19 hp from a slip on. no way.
If only you had a way to powdercoat that kickstand....
I think I know a guy just cant figure out his real name......
@@MotoViceOfficial LOL! Just bring it over... Lets knock it out.
Anyone else looking for mufflers before getting the panigale ?😅
And ecu flash. Prob the 2 biggest initial upgrades
I think it's a mistake to beat like that
Can I have your bike...?
Sure!
19 horsepower?? Come on man do you know anything about motorcycle??
ฮาชันเลขมาศ
ฮาชันเลขมาศ/
I'm assuming that these delete the cats?