@@repairandsharegarage thanks for the reply and documenting your installation. It was very helpful. Just looked up and ordered that fuel feed line too. I would have never known.
@@rodneys9805 thanks I appreciate that! Having a lot of fun with the ppv. Im running all stock pulleys except for the smaller 2.45” upper LSA pulley. It’s giving me about 12 psi .
Yeah for the most part just basic stuff, had to rent a puller from AutoZone for crank pulley , and bought a cheap installer tool off Amazon to put crank pulley back on
How complete is the kit from boost district i have a 13 ppv and am in the market wat else did u need do u have a kit number for a complete swap just like urs injectors hoses wire extendions the pully an all
It’s pretty complete, came with all the wire extensions and belt drive components. The injectors where separate though. They don’t supply you with heater hose for plumbing Hx either but over all it’s mostly all there . They have a kit on their site just for caprice but I think it’s essentially just their G8 kit
Hey man I'm a police officer in Tx and just picked up a 2011 ppv as an off duty car. Do you have an email so I can ask some questions about these cars Thanks!
omg i love this build!!! im picking up a ppv from a auction this week i cant wait to drop in a LSA
Love these cars! You really do get a lot of car for the money.
Good video that’s the same pulley I have Should be good for 12-13 lbs of boost on the 6.0
Great video 🤟🏽
Stuff a rag in the holes when you put those bolts in. If it drops it wont go into engine
Did the stock Caprice PPV steam port tubing work or did the kit come with a different setup? I pieced my LSA kit together myself and just wondering.
Yeah the stock one worked , just had to bend the end where hose connects out of the way of the LSA intake
@@repairandsharegarage thanks for the reply and documenting your installation. It was very helpful. Just looked up and ordered that fuel feed line too. I would have never known.
Did you use the stock throttlebody from the caprice?
Yeah, was the stock piece from the L77
Did you gap the rings?
No I didn’t , never got that deep into the engine. Never even took the heads off since it was already DoD deleted.
@@repairandsharegarage awaesome brother , are you running stock pulleys and how it it running today
keep up the great work man , that was great!!!
@@rodneys9805 thanks I appreciate that! Having a lot of fun with the ppv. Im running all stock pulleys except for the smaller 2.45” upper LSA pulley. It’s giving me about 12 psi .
@@rodneys9805 runs awesome has a couple lights on the dash from a speed sensor and a abs sensor that I would like to get off there soon though
What accessory drive? I have the same setup but not sure on what to get for the pulley routing
What exactly was needed to put the supercharger on to the 6.0 ?
There’s a little bit of a list , I have another video with almost all of what you need on displayed on a table though
did you use basic tools?
Yeah for the most part just basic stuff, had to rent a puller from AutoZone for crank pulley , and bought a cheap installer tool off Amazon to put crank pulley back on
@@repairandsharegarage thank you hopefully i can do everything in my backyard
I noticed you used fic lsa injectors , would you still be able to run e85
Yeah injectors ok , I think the fuel pump is too small though for e85 tune right now though
Love the video. This will be my next upgrade for my caprice. Curious to what size shop you have? Looking to purchase one soon
My shop is 30x35 , awesome upgrade for these cars let me know if you have any questions
I have a question if you can help me out
Can I get link for installation pdf
How complete is the kit from boost district i have a 13 ppv and am in the market wat else did u need do u have a kit number for a complete swap just like urs injectors hoses wire extendions the pully an all
It’s pretty complete, came with all the wire extensions and belt drive components. The injectors where separate though. They don’t supply you with heater hose for plumbing Hx either but over all it’s mostly all there . They have a kit on their site just for caprice but I think it’s essentially just their G8 kit
Crank pully an all came ? Fule line extension so on
@@colbyloya5523 yes both of those and all the gaskets,
Did u reuse ur tb
yea I ended up reusing the old tb
I was thread chasing some holes on my engine . My thread chasers decied to take a plug into my engine
Yikes, that’s stressful. Hopefully you have some bendy magnets around
I did untell the bendy part broke off. I'm hoping to get past this uphill battle
Does any one know if this supercharger will bolt on to l96 6.0 in a 2018 Gmc 2500 ??
It should since it has the ls3 heads
Ls9 cam...
In the future, heard those are decent and can be had pretty cheap
How much does the blower cost
Boost District has them for around $5k brand new
Hey man I'm a police officer in Tx and just picked up a 2011 ppv as an off duty car. Do you have an email so I can ask some questions about these cars Thanks!
Hi, you can reach me at repairandsharegarage@gmail.com
Just followed you on IG