YES, BUT MAKE THE REAR END BETTER THAN THIS BIKE, DONT CUT THE FRAME AWAY, DONT FIT A THIN SEAT, FIT A REAR MUDGUARD OR TYRE HUGGER, FIT A REAR LIGHT UNIT (SMALL LED TYPE) AND THE FRONT MUDGUARD SHOULD FIT OVER THE TYRE AS THIS ONE LOOKS SILLY AND DDOESNT KEEP ANY CRUD OFF THE BIKE, MAKE SOME STAINLESS-STEEL SIDE PANELS WITH HOLES DRILLED IN THEM AT THE FRONT LEADING EDGE (NOT ALL OVER THE PANEL) DONT WRAP ANYTHING WITH CLOTHE WRAPPINGS, BE IT HEADERS OR STANCHIONS, ITS L00KS CRAP AND ENCOURAGES RUST, OTHER THAN THEM THINGS THIS BIKE IS GOOD, P/S, KEEP THE HIGH BARS, CLIP-ONS AND OTHER RACE BARS ARE A STUPID IDEA IF YOU WANT TO RIDE FOR MORE THAN 20 MILES, IF YOU USE A HONDA FIT THE HONDA SPEED WINGS ON THE TANK WHERE HONDA WOULD HAVE PUT THEM, DOMINATORS LEND THEMSELF TO STREET SCRAMBLER BUILDS WELL, AS DO THE BIG TWIN XL's, DONT USE ANY ALLOY WHEELS, SPOKED ONLY AND DON'T FIT SPOKE WRAPS THEY ARE ONE OF THE WORST THING EVER MADE FOR A MOTORBIKE, IM NOT KEEN ON SPOTLAMPS BUT IF YOU FIT THEM USE THE B.M.W ONES, SQUARE AIRCRAFT ALLOY HOUSINGS WITH L.E.D's, REMOVING AIRBOXES IS OK BUT FIT K&N'S (ANY RED ONES L00K OK) WHEN YOU FINISH IT GIVE IT TO ME AND I WILL ADVERTISE YOUR ENGINEERING SKILLS AND YOUR WILL GET LOADS OF ORDERS, I SAVED ADDIDAS FROM CLOSING ITS UK FACTORY, INCREASED SALES BY 25% FOR LEVIS U.K. (@TENS OF MILLIONS of £'s) AND SAVED OVER 100 LOCAL JOBS AT THE "NORTH FACE" CLOTHING FACTORY, IT PAYS TO ADVERTISE AND ADVERTISING WITH ME WILL COST YOU NOTHING, NOT A SINGLE PENNY IN CASH JUST ONE BIKE, TARGETTING POTENTIAL CUSTOMERS, SO WHAT WILL COST YOU A FEW GRAND WOULD COST YOU HUNDREDS OF THOUSANDS OF POUNDS IN CONVENTIONAL ADVERTISING PAYMENTS, THE R&D, DESIGN, TV COMMERCIAL SHOOT, TV AIR-TIME ON TOP GEAR COSTS COMPANIES A LOT OF MONEY (IN BACK HANDERS FOR CLARKSON AND Co) INTERNET ADVERTISING WITH GOOGLE COSTS A LOT OF MONEY, MAGAZINE FULL PAGE ARTICLES DISGUISED AS REVIEWS, THESE ALL COST TENS OF THOUSANDS OF POUNDS AND AS I SAY A FEW GRAND FOR A ONE-OFF BIKE AS PAYMENT, I GUARANTEE TO RIDE IT 50 MPW, P.S. FIT TRAIL TYRES (75% TRAIL - 25% ROAD) DONT LOWER THE SEAT HEIGHT IM NOT A DWARF, MAKE SURE IT'S ELECTRIC START, MY PRESENT RIDE IS KICK START (ITS A HONDA SINGLE SO STARTS 1st KICK) BUT IM NOT GETTING ANY YOUNGER SO ITS ELECTRIC START FROM NOW ON, CHEERS, LET ME KNOW WHEN ITS FINISHED AND WE CAN ARRANGE THE HANDOVER, I WILL ARRANGE FOR THE PRESS TO BE PRESENT, THE LOCAL TV NEWS CREW AND RADIO JOCK ALAN ROBSON (A.K.A. THE FLASHING BLADE) METRO RADIO
One of THE best Timelapse-Videos EVER!!! No one is talking about sponsors or any other bullsh*t! Just the evolution of the bike. This is the content I am here for!!!
You guys really cleaned that one up nicely. Perfect. Nothing is faster on bumpy, tight, hilly roads than a thumper. I used to smoke many Ninjas, GS' s and FZ' s back in the day on my 600 Honda. They have twice the power but my bike is 100 lbs. lighter. I love it
Great idea to use a skate board for seat plate. I did that also, years ago, on my Honda CX500. Turned out to be a brat cafe racer and everyone loved it. Keep it up and ride safely. 😎
When i saw you leave that extra lenghth on the wood (for the space under the seat) i had respect for this build. THATS detail... Nice brotha! Sweet build!
Beauty, little things like tyre white marker matter, still do that on every tyre i buy. And a Von Dutch flying eyeball, it's a tradition for older riders, en zondag poets en peildag🤔
La calidad. Espero y dedicación con que : 1) HICIERON ESTE VIDEO. ES ABSOLUTAMENTE ASOMBROSA. 2) MI RESPETO Y APOYO A LOS QUE HICIERON DE ESA MOTO UNA OBRA DE ARTE, LAS scrambles no son mis favoritas pero está se ve súper bonita y bella. Saludos desde Venezuela. Like y nuevo sub. Los felicito. .... The quality. I hope and dedication with which: 1) THEY MADE THIS VIDEO. IT IS ABSOLUTELY AMAZING. 2) MY RESPECT AND SUPPORT TO THOSE WHO MADE THAT MOTORCYCLE A WORK OF ART, THE scrambles are not my favorites but this one looks super pretty and beautiful. Greetings from Venezuela. Like and new sub. I congratulate you.
Excellent work!! It would be useful to pass the frame as well as the rest of the parts with varnish, the tank and not only. It would be nice for the next project to do a jawa reconstruction.
Well done guys, it's a good job, it's well filmed, and the time lapse is well paced. I have the same project here in France in 2024, I think this fuel tank is perfect for this bike, do you have a link to order it please?
Perfection bro , but i will like it more if you replace the handlebar with a bracelet handlebars , i think this is a big upgrade for your cafe racer bike , anyway you did a great job there you deserve my subscription and like .
My dream motorcycle, sadly it just became a dream cause i dont have enough wealth to build or buy that kind motorcycles😔. Btw this project is so damn cool💯💯
Nyt on hienoa jälkeä! Näitä lisää. Saa käydä mun kanavan laittamassa seurantaan vlogi tyyliin rakentelen cbr xx:ää aina kun kerkiän. Nyt on ollut pakkaset niin ei tarkene pihalla askarrella niin on ollut taukoa.
pirun hienoo työtä ootte saanu aikaa! Itsekki haluisin joskus myöhemmi rakentaa tämmöse scrambler/cafe raceri isälleni ku se niistä hirveesti tykkää ja tämmöne o iha piru hienoo kattottavaa ku joku oikeesti rakentelee tämmösiä. Aplodit ja hyvää joulua!
Would you like us to do a new project?🤔
Yes more like the enduro…. like this one..
Yes please
Please more about urban LATAM moto to dual purpose or to scramble adventure 😱
YES, BUT MAKE THE REAR END BETTER THAN THIS BIKE, DONT CUT THE FRAME AWAY, DONT FIT A THIN SEAT, FIT A REAR MUDGUARD OR TYRE HUGGER, FIT A REAR LIGHT UNIT (SMALL LED TYPE) AND THE FRONT MUDGUARD SHOULD FIT OVER THE TYRE AS THIS ONE LOOKS SILLY AND DDOESNT KEEP ANY CRUD OFF THE BIKE, MAKE SOME STAINLESS-STEEL SIDE PANELS WITH HOLES DRILLED IN THEM AT THE FRONT LEADING EDGE (NOT ALL OVER THE PANEL) DONT WRAP ANYTHING WITH CLOTHE WRAPPINGS, BE IT HEADERS OR STANCHIONS, ITS L00KS CRAP AND ENCOURAGES RUST, OTHER THAN THEM THINGS THIS BIKE IS GOOD,
P/S, KEEP THE HIGH BARS, CLIP-ONS AND OTHER RACE BARS ARE A STUPID IDEA IF YOU WANT TO RIDE FOR MORE THAN 20 MILES, IF YOU USE A HONDA FIT THE HONDA SPEED WINGS ON THE TANK WHERE HONDA WOULD HAVE PUT THEM,
DOMINATORS LEND THEMSELF TO STREET SCRAMBLER BUILDS WELL, AS DO THE BIG TWIN XL's, DONT USE ANY ALLOY WHEELS, SPOKED ONLY AND DON'T FIT SPOKE WRAPS THEY ARE ONE OF THE WORST THING EVER MADE FOR A MOTORBIKE, IM NOT KEEN ON SPOTLAMPS BUT IF YOU FIT THEM USE THE B.M.W ONES, SQUARE AIRCRAFT ALLOY HOUSINGS WITH L.E.D's, REMOVING AIRBOXES IS OK BUT FIT K&N'S (ANY RED ONES L00K OK)
WHEN YOU FINISH IT GIVE IT TO ME AND I WILL ADVERTISE YOUR ENGINEERING SKILLS AND YOUR WILL GET LOADS OF ORDERS, I SAVED ADDIDAS FROM CLOSING ITS UK FACTORY, INCREASED SALES BY 25% FOR LEVIS U.K. (@TENS OF MILLIONS of £'s) AND SAVED OVER 100 LOCAL JOBS AT THE "NORTH FACE" CLOTHING FACTORY, IT PAYS TO ADVERTISE AND ADVERTISING WITH ME WILL COST YOU NOTHING, NOT A SINGLE PENNY IN CASH JUST ONE BIKE, TARGETTING POTENTIAL CUSTOMERS, SO WHAT WILL COST YOU A FEW GRAND WOULD COST YOU HUNDREDS OF THOUSANDS OF POUNDS IN CONVENTIONAL ADVERTISING PAYMENTS, THE R&D, DESIGN, TV COMMERCIAL SHOOT, TV AIR-TIME ON TOP GEAR COSTS COMPANIES A LOT OF MONEY (IN BACK HANDERS FOR CLARKSON AND Co) INTERNET ADVERTISING WITH GOOGLE COSTS A LOT OF MONEY, MAGAZINE FULL PAGE ARTICLES DISGUISED AS REVIEWS, THESE ALL COST TENS OF THOUSANDS OF POUNDS AND AS I SAY A FEW GRAND FOR A ONE-OFF BIKE AS PAYMENT, I GUARANTEE TO RIDE IT 50 MPW,
P.S. FIT TRAIL TYRES (75% TRAIL - 25% ROAD)
DONT LOWER THE SEAT HEIGHT IM NOT A DWARF,
MAKE SURE IT'S ELECTRIC START, MY PRESENT RIDE IS KICK START (ITS A HONDA SINGLE SO STARTS 1st KICK)
BUT IM NOT GETTING ANY YOUNGER SO ITS ELECTRIC START FROM NOW ON,
CHEERS, LET ME KNOW WHEN ITS FINISHED AND WE CAN ARRANGE THE HANDOVER, I WILL ARRANGE FOR THE PRESS TO BE PRESENT, THE LOCAL TV NEWS CREW AND RADIO JOCK ALAN ROBSON (A.K.A. THE FLASHING BLADE) METRO RADIO
ร
One of THE best Timelapse-Videos EVER!!! No one is talking about sponsors or any other bullsh*t! Just the evolution of the bike. This is the content I am here for!!!
You guys really cleaned that one up nicely. Perfect. Nothing is faster on bumpy, tight, hilly roads than a thumper. I used to smoke many Ninjas, GS' s and FZ' s back in the day on my 600 Honda. They have twice the power but my bike is 100 lbs. lighter. I love it
Great idea to use a skate board for seat plate. I did that also, years ago, on my Honda CX500. Turned out to be a brat cafe racer and everyone loved it. Keep it up and ride safely. 😎
Sounds good! Thank you!
And here i am cutting a leaked jerry can and beating it with a mallet like a savage
Every single kid in this world should have the right to have proper tools and a place to use them. Thank you guys for keeping creativity alive!
Girls....shaving their fur,pouting into a camera phone....difference of the sexes!
I love how you use a skateboard trucks for the tail light. Thats pure creativity.
Nghe xong bài này cái thấy tâm trạng buồn và nặng nề kinh khủng. Nhưng lại cứ phải replay hoài cả ngày😍
QUE EXCELENTE MODIFICACIÓN, FELICITACIONES POR EL TRABAJO, GRACIAS POR COMPARTIRLO... UN ABRAZO DESDE LA RIOJA - ARGENTINA
those turn signals made from trucks are sick, super creative!
the video started with big coats and endes shirtless.. what a beautyfull journey. amazing bike
Because of simplicity and creativity, one of the coolest project I've seen.
Belo trabalho uma mistura de retro com modernidade
I'm at the 4:13 stage - finding how to mount a seat, great vid!
Отличная работа! Теперь FMX 650 стал похож на нормальный мотоцикл 👍👍👍
That’s dope how u used skateboard trucks for the rear signal lights 💪🏾🔥🔥🔥
So cool with what you did with the skateboard truck.
Love the truck as the tail light, and the 'don't die' key chain XD
When i saw you leave that extra lenghth on the wood (for the space under the seat) i had respect for this build. THATS detail... Nice brotha! Sweet build!
At first I was like aww I woulda made it longer under the seat for the gap. But when you pulled it off my face lit up 😅 🎉
Really creative and fun to watch, love what you did with the trucks!
Fun
ua-cam.com/video/vnjRNz81MFs/v-deo.html
Skateboard trucks rear lights is a great idea!
Excelente vídeo, excelente trabalho! Me inspirei nisso para fazer minha moto tambem. Parabéns!
Awesome result - especially I like a tank-seat line!
Thank you! Nice to hear, that was one of the most important things for us
damn that truck as rear lamp in the end shocked me XD too creative bro i cant' handle it
Great bgm I fell in sleep 10 times during the video.
the beast project, I am about to start a similar one, it is a yamaha Rt 180, we are going to transform it into a scrambler. The best proyec 👏🏼👏🏼
Dude those trucks for the rear brakes are sick! Love from California
Love the scare board truck idea. Brilliant 🤘🏻🤘🏻
the truck tailight is sick af
Man wish I had these guys do my bike haha this is art
Beauty, little things like tyre white marker matter, still do that on every tyre i buy. And a Von Dutch flying eyeball, it's a tradition for older riders, en zondag poets en peildag🤔
absolutely masterpeace nice job with the tal ilght, use skate ruck is epic idea. Keep going i love it.
Thanks!🔥
I like that you used a skateboard truck for your rear break and turn signal mounts hahaha
Nice work boys! Beautiful bike. Lots of work there and you guys nailed it. Let's see some more!
Not a bad job guys wish I had friends like you I injoy doing the same iv built a few like this over my time can't beat a Honda
Super cool to see home made project
Looks absolutely amazing.
La calidad. Espero y dedicación con que : 1) HICIERON ESTE VIDEO. ES ABSOLUTAMENTE ASOMBROSA. 2) MI RESPETO Y APOYO A LOS QUE HICIERON DE ESA MOTO UNA OBRA DE ARTE, LAS scrambles no son mis favoritas pero está se ve súper bonita y bella. Saludos desde Venezuela. Like y nuevo sub. Los felicito. .... The quality. I hope and dedication with which: 1) THEY MADE THIS VIDEO. IT IS ABSOLUTELY AMAZING. 2) MY RESPECT AND SUPPORT TO THOSE WHO MADE THAT MOTORCYCLE A WORK OF ART, THE scrambles are not my favorites but this one looks super pretty and beautiful. Greetings from Venezuela. Like and new sub. I congratulate you.
Sweet build boys 🤙 keep them coming when you can… some real neat ideas in your first build vid
a dream car I must try rebuilding my old car
Excellent work!! It would be useful to pass the frame as well as the rest of the parts with varnish, the tank and not only. It would be nice for the next project to do a jawa reconstruction.
very well edited timelapse, awesome rebuild GG
Nice work... skateboard truck, very cool idea!
good jop guys...i enjoyed the video as a person who is at the beginnig of the modification proses of my yamaha...
Absolutely well done mate! I’ll be back 🤘🏽
i wish my fmx looked like this
Great work! Cool to see how it all came together, love the skate truck rear end!
Well done guys, it's a good job, it's well filmed, and the time lapse is well paced.
I have the same project here in France in 2024, I think this fuel tank is perfect for this bike, do you have a link to order it please?
That was so amazing!!!! Thanks boys from Venezuela
very very nice build, i loved the skaetboard tail light. very creative and inspirational. Keep it up!
Thanks!
чуваки. задний фонарь это лучшее из кастомайзинга, что я видел. вы великолепны. спасибо большое
Love It! Top spanner work guys 😎
Belo trabalho, vamos continuar!!!!!
This build is sick. Only small change I would make is to throw that front fender away. Looks out of place to me. Great job guys.
Perfection bro , but i will like it more if you replace the handlebar with a bracelet handlebars , i think this is a big upgrade for your cafe racer bike , anyway you did a great job there you deserve my subscription and like .
This is a beautiful build
Loved the results. Nice work. Looks great.
In 1993 I cut off half the rear sub frame, foam wrapped a skateboard and bolted it on. I was about your age.
Awesome!!
The fridge is facing the wrong direction....build beers are easily gotten if you spin it round! 😂
daaamn that tail light on trucks looks cool as fuck! great job!
I am your 10th follower. Don't stop doing this. I love it
Now i know how to make my seat thanks yall lmao i have a gas tank for my xr150 but could find a seat but noe i know to make one nice
The cylincer is at the weardest spot ever... it'll burn the riders leg.🤣
There is nothing that burns a rider.
My dream motorcycle, sadly it just became a dream cause i dont have enough wealth to build or buy that kind motorcycles😔. Btw this project is so damn cool💯💯
this is beautiful work i real like it 😍😍😍
It is very very great bro
I'm your 34th brother plz when your famous don't forget us
Felicitaciones por su trabajo me gusto el estop y las luces de dirección excelente detalle el sensorio de la patineta😉
Amazing work
Somehow fenders became uncool and water and mud thrown everywhere became the bomb.
Can you carry a passenger in it? Great job!!!🎉
ヤマハTWの太いタイヤを活かしたカフェレーサー改造を夢見た事が有りました、この動画を見てやれば出来ると感じました
That's a beast 👹
Nyt on hienoa jälkeä! Näitä lisää. Saa käydä mun kanavan laittamassa seurantaan vlogi tyyliin rakentelen cbr xx:ää aina kun kerkiän. Nyt on ollut pakkaset niin ei tarkene pihalla askarrella niin on ollut taukoa.
Parabéns. Conseguiram deixar a moto horrível.
Skateboard truck for a license holder. Nice
Helvetin hieno! Hyvin tehty pojat
love the vibes
Tres beau travaille j'ai beaucoup apris
So good!
Sick build🤘
I prefer the original the fmx was a very nice looking motorcycle even if it came out today.
Monstro!.....
Incredible congrats
Beautiful build. Would look nice with a smaller sharper beak though.
You turned the beautiful mcycle into a yarn
beautiful work
incredible
brilliant job. respect.
I just came back to see the really gorgeous seat-tank line.. one of the best scramblers, definitely good stuff.
Congrats
Good Job 👍
Beautiful
Do you have a video on how you made that skateboard truck rear brake/ turn light system?
Excelente trabajo bro
its beautiful
love it 21 subs 🎉🎉🎉... keep doing it brother 🔥🔥
Aivan helveti hieno! Ei voi muuta sanoa. Tajusin videon lopun maisemista ja rekisterikilvestä että mahdatte olla suomalaisia :)
Espectacular!
Della serie come distruggere una bella moto per fare un cancello a due ruote!
Awesome ✌keep going brother🔥
pirun hienoo työtä ootte saanu aikaa! Itsekki haluisin joskus myöhemmi rakentaa tämmöse scrambler/cafe raceri isälleni ku se niistä hirveesti tykkää ja tämmöne o iha piru hienoo kattottavaa ku joku oikeesti rakentelee tämmösiä. Aplodit ja hyvää joulua!
Kiitos samoin!