I sent peter hamber a email regarding this very thing having used the korrosol for a long time now, the only real difference is the autowheels has a slight bit thicker viscosity to allow better cling to the wheels, where as the korrosol being a dedicated fall out remover is designed to run off slightly to allow easier wash off with your water medium of choice...nice review....i'm biased anyway i love their products...the surfex hd is my fav, not just because the car side but my upvc cills on my windows needed a good clean quick swill off then a little bit of the apc sprayed on to the cill agitated with a soft brush and hand on heart they looked cleaner than new...also made sure i gave the cill a good swill off with water after....cheers for the video.
You love their products cause Bilt Hamber stuff is top notch. The only reason I almost never buy BH products is that I can find cheaper options where I live, otherwise it's the best choice.
Wouldn't the best test be to apply as the makers of fall--out removers intended, i.e. after you've washed the wheels? Then look for actual bonded materials to test, rather than testing on road grime that is removable with a simple APC.
i would just say that doing a back to back comparison of two products for cleaning wheels you should do it on both front wheels rather than front and rear they may have been more of a subjective difference
Not a particularly insightful video, I'm afraid. The information is available on their website and their guidance indicates, one for body (korrosol) and one for wheels.
For clarification: Auto wheel and Korrosol are chemically the same, accept Auto-wheel is more viscous (therefore able to cling to vertical and inverted surfaces for longer) and it also has detergents in it, as wheels generally are exposed to a more harsh environment. Both are safe to use on ALL painted surfaces.
Thanks for the video. Did you do anything with the remaining black marks on the BMW wheels, (iron fallout embedded on surface) after the first application and rinse? For example, give it another go with the auto wheel product and more agitating with a stiff brush?
You probably dont give a shit but if you're bored like me during the covid times you can stream pretty much all the new movies on InstaFlixxer. Been streaming with my brother for the last few weeks :)
When you say 'there has to be some sort of difference', I would argue that, with no visible difference, the only difference is that the Bilt Hamber marketing department know that having two distinct products for panels and wheels (instead of one) tends to increase their sales. Think I'll stick with Korrosol for both uses. Great product but smells disgusting and makes your whole storage area smell disgusting too. Thanks for the review.
If you read the MSDS you can see they are practically the same product, only difference is Korrosol has 5-15% surfactants and Auto-wheel has 15-30%. The Iron "eating" compound is the same concentration in both. So Auto-wheel is a better all purpose cleaner, better for degreasing, which makes sense since its supposed to be used on wheels.
Stuart Miller the difference I believe is the viscosity of the wheel cleaner being slightly thicker to better adhere whilst the Korrosol is designed to run off and therefore slightly less thick.
The problem I have with any of these type of product reviews is, how much cleaning is done by the product itself? I can't help thinking most of the grime is removed purely by the action of the brush and pressure washer.
Surely, BiltHamber state that Korosol is for fall-out over the body/paintwork area and AutoWheels is for the ... wheels..?? If one product would do both jobs in a satisfactory manner then *why* would they produce two products...?? If there's a difference in consistency between the two products then, again, BiltHamber will have done this for a valid reason..?? There's another channel who advocate applying a soap-wash to the body/paintwork before applying Korosol but do Bilt Hamber advise this in their instructions..??
For me it seems obvious, it's on the big blue lable. One is for wheels and NOT paintwork and the other can do both. So is auto-wheel a waste of time, i would say yes if there is no noticable difference in the cleaning power.
www.detailingworld.co.uk/forum/showpost.php?p=4036264&postcount=5 "Correct auto-wheel has a higher degreaser level and increased viscosity for longer cling." straight from the source.
its just a good way to overprice one so people think the other is a bargain then all rush to buy whatever is cheaper! in theory you should just buy the cheapest one in 5ltr and fill up a ik pump sprayer and use on whole car.
While they effectively do the same job, removing embedded metal particles that cover both your wheels and paintwork, they are still different products. Auto Wheel is a very strong product that’s a much higher viscosity, meaning that you don’t get as much “coverage” as you would with Korrosol. This means auto wheel will also cling to the paintwork for longer. Whereas Korrosol is specifically designed for use on every auto body paint finish (including lacquers). Offering a wider, less targeted solution that’ll cover your vehicle quickly and easily.
Every Bilt Hamber product I have tried has been excellent and good value, also a British brand.
Brilliant ain't they
Simon Reeves agreed mate and even more important to buy British now. 👍👍👍🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧
Bri’ish*
@@homiixide Blitish
I sent peter hamber a email regarding this very thing having used the korrosol for a long time now, the only real difference is the autowheels has a slight bit thicker viscosity to allow better cling to the wheels, where as the korrosol being a dedicated fall out remover is designed to run off slightly to allow easier wash off with your water medium of choice...nice review....i'm biased anyway i love their products...the surfex hd is my fav, not just because the car side but my upvc cills on my windows needed a good clean quick swill off then a little bit of the apc sprayed on to the cill agitated with a soft brush and hand on heart they looked cleaner than new...also made sure i gave the cill a good swill off with water after....cheers for the video.
You love their products cause Bilt Hamber stuff is top notch.
The only reason I almost never buy BH products is that I can find cheaper options where I live, otherwise it's the best choice.
I asked them the same question a couple of years ago and was told the same exactly. korrosol slightly cheaper and its what i buy in 5 litre tubs.
Could I have Peter Hambers email addy please?
I'm happy with this, only used the korrosol so handy to know there isn't much in it between the two! 😊👍
Wouldn't the best test be to apply as the makers of fall--out removers intended, i.e. after you've washed the wheels? Then look for actual bonded materials to test, rather than testing on road grime that is removable with a simple APC.
i would just say that doing a back to back comparison of two products for cleaning wheels you should do it on both front wheels rather than front and rear they may have been more of a subjective difference
Yeah I realised this shortly after. However I do still compare them side by side on the same wheel and a body panel as well.
TS Detailing good content though keep it up
Not a particularly insightful video, I'm afraid. The information is available on their website and their guidance indicates, one for body (korrosol) and one for wheels.
For clarification: Auto wheel and Korrosol are chemically the same, accept Auto-wheel is more viscous (therefore able to cling to vertical and inverted surfaces for longer) and it also has detergents in it, as wheels generally are exposed to a more harsh environment. Both are safe to use on ALL painted surfaces.
Thanks for the video. Did you do anything with the remaining black marks on the BMW wheels, (iron fallout embedded on surface) after the first application and rinse? For example, give it another go with the auto wheel product and more agitating with a stiff brush?
As the other user said you should try both front wheels , but nice review anyway
Viscosity is only difference. Detailers say you can dilute the auto wheel a little if you want to throw it on paint.
To save the pain of watching - no difference. The end.
You probably dont give a shit but if you're bored like me during the covid times you can stream pretty much all the new movies on InstaFlixxer. Been streaming with my brother for the last few weeks :)
@Hunter Harper yup, been watching on InstaFlixxer for since december myself :D
@@waylonjoshua5273 both accounts made 1 day apart, poor attempt of promotion
@@pj-vb5rk it’s a scam, it’s mainly bots
When you say 'there has to be some sort of difference', I would argue that, with no visible difference, the only difference is that the Bilt Hamber marketing department know that having two distinct products for panels and wheels (instead of one) tends to increase their sales. Think I'll stick with Korrosol for both uses. Great product but smells disgusting and makes your whole storage area smell disgusting too. Thanks for the review.
If you read the MSDS you can see they are practically the same product, only difference is Korrosol has 5-15% surfactants and Auto-wheel has 15-30%. The Iron "eating" compound is the same concentration in both. So Auto-wheel is a better all purpose cleaner, better for degreasing, which makes sense since its supposed to be used on wheels.
Stuart Miller the difference I believe is the viscosity of the wheel cleaner being slightly thicker to better adhere whilst the Korrosol is designed to run off and therefore slightly less thick.
I quite like the smell. :D
Both in auto glym bottles, there’s a dose of irony.
Great vid tho 👍
Very interesting. Many thanks.
Great video.ive been wondering for ages if the was any difference between these products
The problem I have with any of these type of product reviews is, how much cleaning is done by the product itself? I can't help thinking most of the grime is removed purely by the action of the brush and pressure washer.
Surely, BiltHamber state that Korosol is for fall-out over the body/paintwork area and AutoWheels is for the ... wheels..?? If one product would do both jobs in a satisfactory manner then *why* would they produce two products...?? If there's a difference in consistency between the two products then, again, BiltHamber will have done this for a valid reason..??
There's another channel who advocate applying a soap-wash to the body/paintwork before applying Korosol but do Bilt Hamber advise this in their instructions..??
Hi, with the Korrosol I guess this is used to remove all contiminates including brake dust, iron particles, tar. Is that correct?
Great Video. Do both of these corrode/Discolour disc and calliper?
They will do, but if you drive for 30 seconds it will be completely gone
For me it seems obvious, it's on the big blue lable. One is for wheels and NOT paintwork and the other can do both. So is auto-wheel a waste of time, i would say yes if there is no noticable difference in the cleaning power.
2:01 Bilt say on label, apply on dry wheels and AVOID CAPS...
An interesting and helpful video I found.
None of these Products are used on real world ‘dirty’ wheels
Karrosol is for paint work, auto-wheel is for wheels
They are the same
www.detailingworld.co.uk/forum/showpost.php?p=4036264&postcount=5 "Correct auto-wheel has a higher degreaser level and increased viscosity for longer cling." straight from the source.
And the verdict.... on body panels, tape removes more grime then either product.
Flipping awesome company
its just a good way to overprice one so people think the other is a bargain then all rush to buy whatever is cheaper! in theory you should just buy the cheapest one in 5ltr and fill up a ik pump sprayer and use on whole car.
Korrosol more friendly for you paint work.Thats what its made for
Not a lot of difference, either way I love bilt hamber auto wheel. Was sceptical buying it but it’s very good stuff.
Can I use this on my paintwork?
yh both can be used for paintwork. I would say korrosol a better choice.
So I'm best off using up the whole bottle of korrosol before I buy anything else. Check.
While they effectively do the same job, removing embedded metal particles that cover both your wheels and paintwork, they are still different products.
Auto Wheel is a very strong product that’s a much higher viscosity, meaning that you don’t get as much “coverage” as you would with Korrosol. This means auto wheel will also cling to the paintwork for longer.
Whereas Korrosol is specifically designed for use on every auto body paint finish (including lacquers). Offering a wider, less targeted solution that’ll cover your vehicle quickly and easily.