Levelling up your Speedo and GPS T7 World Raid install
Вставка
- Опубліковано 7 лют 2024
- Putting a GPS on your motorcycle handlebars is a bad move. Check out our GPS and Speedo mounting solution for the Yamaha T7 / World Raid and see why levelling up these two instruments is the best way to set-up your adventure bike dashboard. Purchase the unit here: motologyfilms.com/product/tft...
🔔 Hit the Subscribe button and become part of our growing community for more of our thrilling off-road adventures and valuable riding insights.
Join this channel to get access to perks:
/ @motologyfilms
Subscribe to Motology Films on UA-cam: / ariemann1
Visit our website: motologyfilms.com/
Purchase Our Feature Films here: gumroad.com/ariemann1
Follow us on Social Media
Instagram - / motology_films
Facebook - / motologyar
TikTok - / ariemann1 - Авто та транспорт
![[柴犬ASMR]曼玉Manyu&小白Bai 毛发护理Spa asmr](http://i.ytimg.com/vi/0TsXQ7z2Dh4/mqdefault.jpg)
Hey guys, one final detail on Installation - put a small blob of silicone, or rubber tape on the aluminium crossbar to complete the stabilising. The tension between this bar and the curled tabs can vary, given the combined movement of the rubber grommets and tab profile. Cheers
AR
Hello ! Not afraid about the speedo plug not being protected against water now ?
How man people here like Adam's content so much you hit the like button before the advert is even done playing and the video hasn't even begun. :)
Thanks mate ✊️
Yeah, guilty. 😎
Oh FFS, that’s why there’s so many ads, people like you liking the ads 🤪
@@Corey-pd3mi doesn’t change a thing. Ads are based on your Google algorithm not the actions of others watching or even the content of the video. Try using a VPN and run ad blocker in your browser. 👍🏽
Premium…. No ads here.
Your 7 days Australia Dirt tour was awesome sir. Loved every minute of it 😊
Hi, got my stabilizer mount today. Took one week to get from Australia to Finland, super fast delivery... took one week to get Ktech springs from Sweden to Finland. Product looks great! Looking forward to getting it mounted.
Hey there ! Are there any cool places to ride an adv bike in Finland ?
I run on my world raid the Garmin Montana 750i, but I mounted above my speedometer and sideways on the crossbar. I did this as I find the Montana has better usable display sideways, i can also adjust the angle with help with glare. I also incorporated a quad lock dampener in the mount. I then just use the usb cable to bike socket for lower. Works perfect.
Mate, this is so neat, very well done! I mean, how amazing are you, the riding, the narrating and now the building! Truly awesome mate!! You make me want to get a T7 haha ;)
thanks for another great video - im now at the point of purchasing a new T7 - its great to see your videos - everything i need to know from a down to earth - no bullshit guy -
THANKS
I dont have a T7, but if i get ine, this will probably be my first purchase for it. Great design
Nice bit of gear Adam well done
Thanks
Dave
Can you get this for the warhorse as well? Your movies inspired me and I bought mine last week.. mine, as well as your yours have the inner beauty and character demanding respect and admiration.. love it so much 😅
Elegantly simple solution.
good product with good information
Good stuff! Almost makes me wat to get a T7. ;)
Bro is a professional massuer.
awesome dude! The ducati desert x could use one of these brackets.
MORE WARHORSE PLEASE⚠️
Did you put anything on the backside of the screws holding the GPS mount in place to prevent them from backing out or are the bare tips just poking out?
Good product and vid. Now when USA gets World Raid if ever I'll have one.
Hey, does it work with the Garmin Zumo XT ? My T3 is a base, so its the other stabiliser plate. Did you tried with the Zumo ?
Thanks
Throwing in my enquiry for a camera gear episode. What you're using to film, how you pack it and things to think about while filming these kind of adventures like "The Warhorse".
Sincerely yours, a fellow Enduro/Adventure rider.
Fantastic looking product, wish it would fit my Tiger 900 RP..lol
Can you do wheelies with the warhorse too? Jump over trunks like with the T7?
The Warhorse can be forced to do all of those things, but I don't want to hurt her ... so I've stopped that kind of behaviour when riding the old girl. That doesn't mean I don't let her eat. I love revving the motor through the gears on epic dirt roads. Never gets old.
grear product....thanks
If only we could get the speedo and the GPS reading to be the same! 😂 10% out at 100kph is pretty annoying when on the road.
You can put an other abs ring on your front wheel hub to get that problem solved.
@ellerdschippers No you can't, I tried that, and you need both front and rear, but even then that doesn't work as there is a gear reading that throws faults and confuses the computer when to go into eco-mode, it dramatically increases fuel consumption as it makes the bike run rich.
Is the instrument loom just too short to run the cluster ti the right side?
Looks reel good 👍🏻
Does anyone know if it fits with barkbuster handguards?
Would love to see you acquire a 701 and go through a building
process.
Nice piece of kit. Do you run a wired amp clamp that powers your Montana? Or how are you powering the 700i? Thanks
Yeah mate, that GPS bracket runs power cable back through the TFT hole and then down direct to battery 👍
Sorry Adam...what's the name of God bracket? Thanks for all💪👍
Nice mount
wanna hear your opinion on the transalp.
Would be good to find a mounting platform for the Desert X
Need one for the older T7 but been out of stock on website, are you going to make them again.
They are in stock ready to ship mate.
Hey adam, does this work with barkbusters? Id get it then, but having it sent here to germany without knowing is a bit of a risk... Hipe you can help. If barkbusters fot, all others should fot too, ghey are the bulkiest handguardss i know
Wow, sorry Guys for my horrible spelling. Must have been drunk or sth. Anyways, I ordered the Product and I have barkbusters fitted. There ist enough space, so all good!
Were they tech screws?
Mate
Awesome mount Adam all I need now is a T7 to fit it to and do you know if it will work with BarkBusters ..
Same question from my side. I know it's impossible to test with all aftermarket handguards but the Barkbusters are so popular, I wonder if anyone has a clue if the mount would fit with them?
My option is the small rugged tablet with the Osmand app.
Hi Adam, really interested in one of these for my World Raid, ive got the bar mounts spun around to open up the cockpit (im a tall long unit) so the bars are closer to the dash, do you think there would be clearance issue with this setup? Cheers
Hi mate, even with the bar clamps spun, The handlebars themselves should be well clear. However, I suspect whatever hand guards you are running may contact. In my experience, most handguard mounting brackets are way longer than they need to be and hang off your handlebars like bull bars. Plenty of people have purchased our mount and modified their handguards to suit.
@@MotologyFilms excellent thanks mate, im just running the factory hanguards so it shouldnt be a factor, ill do a couple checks and pop an order in.
But what's the problem with the wobbly speedo? Isn't it that it's done this way by purpose? Otherwise, Yamaha would have done it differently and made it stiffer? I'm riding mine Tenere, speedo is shaking, true, but it's all fine. I agree with the GPS position, I mount mine on the bar on the tower and it's even higher.
You say the word “legend “ a lot to describe wonders of the adventure world…. Have you read the Alchemist!
I’m running barkbusters and wonder if enough clearance
The TFT is much thinner than the original version. You have to shorten the inside barclamps of the barkbusters, as they are very long.
ua-cam.com/video/clJ5dI-A4x4/v-deo.htmlsi=CcjAtrWFHpa3Szqg this shows what you can do to fit with Barkbusters 👍🏼
Isn't easier to mount something like this "r12-bar-clamp-amps"
It will raise the device towards your point of view a little bit more, than the regular t7 display height.
Clean as fuck.... 😅 Really like that. Would be nice for a phone mount there as it's about the same size as the screen.
Do you have more plans for add on bits?
👍🤙
Not going to work with Tusk hand guards, unfortunately.
my comments never pop up.. strange....
I hope you're seeing this comment you left? Thanks for the subscribe mate
i did . did you saw the link i posted? it's about an aluminium rally tower for the t7 and W-raid...?@@MotologyFilms
Somehow you have a familiar face, but I couldn't designate it to somebody. Now it made click. Are you by any chance the son of Chuck Norris?