WHAT YOU NEED TO LS SWAP AN OBS IN 15 MINUTES!!! ( 96-00 )

In this video I do a quick rundown on what you need to LS Swap a 96-00 OBS!! Sure there are some things I could have gone into more detail on but I have all that in the playlist! I hope this helps you with your swap, thanks for watching!!!
Patreon Link: patreon.com/user?u=70971187
Sub Mail:
Tahoe's & Turbo's
Box. 672
Southey Saskatchewan
Canada
S0G 4P0

[@lit549]

No one EVER mentions the ac setup.

[@TahoesNTurbos]

I do plan on addressing it in a future video, everything is there i just have to figure out what output to connect to on the holley and make it all pretty

[@urmommsukcdmycook]

@@TahoesNTurboshey btw did u ever mention it ? i am about to go ahead and swap it out

[@urmommsukcdmycook]

@@TahoesNTurbosand wanting a/c so please lmk what i need

[@valdezerick]

Hello !!! Can you share the serpentine V belt part number please !

[@youngmunnsr]

Part number for custom cau cau pipe intake?

[@Mario-dt4yd]

can I order that parts catalog ?

[@yoshiosanchez2962]

I like what you done, I have a 99-00 Escalade, would it be possible to do that swap, using my trans also, is the same old engine vortex ? Like the Tahoe and yukons I’m trying to be different, my engine bay is same as yours

[@TahoesNTurbos]

Thank you and yes they are identical, just different fenders and grill. I actually had plans to put your style on my Tahoe but went with the SS style.

[@yoshiosanchez2962]

I guess the only thing that change on those trucks was the body front end and the fender flare trim, I know some tahoes obs are 1500 can you help me

[@TahoesNTurbos]

the tahoe and escalades are identical aside from some trim. these trucks are very simple to work on and thankfully parts are everywhere

[@lit549]

So, im having hell getting my ac to work. Bp harness, dual electric fans. Im being told i need a pressure transfucer welded into the "high side" line🤷

[@zakiramjan9822]

when Freon goes from high pressure to low pressure it gets cold. First make sure your system has no leaks. After make sure your compressor is compressing safely. May need gauges to monitor both high and low side. If you're running orifice tube they're easy to clog otherwise check your expansion valve. With correct pre4ssures I don't see why you shouldn't have cold ac. There might be a thermo sensor on the compressor inline the clutch power wire, that could open the circuit if faulty.

[@albertyracheta8269]

What about exhaust and catalytic converters?

[@stevenmartin4889]

Cats are the last thing you gotta worry about concerning a swap

[@pachyperez7146]

Were get the catalog

[@TahoesNTurbos]

mine came when I bought my parts, everything is listed and updated on their website

[@kathondonaldson9073]

Question for you!

[@brandonbusteed103]

Where can I order that parts catalog from?

[@SuperNicks22]

I bet you can get the catalog for ICT Billet from their website... lol

[@powerchevy5148]

Some one come get my Tahoe and to a 53 swap ole 350 just have put today

[@Hehakaa]

This doesn’t apply to the 1995? Why not

[@christinogriego428]

because a 95 is a TBI setup not a Vortec

[@daredevildare3641]

Same concept but you will need to get a vortec fuel pump and some other things

[@greddmyles3677]

Definitely don't need the spacer, just buy the 4l80 flex plate

[@Teambtkjdmassfuck]

If the obs is 1997 came with a 4l60 oready do you still need the spacer ??

[@chrismartin500]

$7000

[@elitecleaning287]

Will a 6.0 fit?
If so which one

[@T.U.G.T.V.]

Yes it will

[@irasteed2757]

4.8,5.3, 6.0, 6.2 are all the same size lol

[@davea5113]

Terminator X = $2700, your $2000 flub on wireharness, another $1500 for everything else, so total=$6200.00 - 6500.00

[@testosteroneinc.3800]

You can buy a complete good LS based truck for that much! 😂

[@teabag402]

0 reason for him to have used a Terminator, he could have used the truck harness and ECU and it would have been just as ugly 😂