Another tip to get a better constrictor knot and a longer lasting rubber: 1. Once you have your loose constrictor knot, fasten one end of the line to a fixed point on your work bench. 2. Place the other end of the line around a screw driver or your insertion tool. 3. Lubricate the rubber and line so that it can slip around the rubber. 4. Pull the constrictor line tight and using your free hand, spin the rubber back in forth whilst gently pulling the line tighter. This will give you a tighter constrictor and it wont tear the rubber.
Great video thankyou, I have recently bought a spear gun, both bands snapped when I took it out, I was gonna but new bands this way looks more easier and cheaper to buy and make your self than buying bands already made, I’m new to spear fishing and I’m glad I found this video, thanks again
It's actually a "constrictor knot" if you notice how the working end is run under the other side of the knot as opposed to the side a clove hitch would be.
And don't forget if you gonna use a double band muzzle, the first one you can use a bench the second one you gonna need to put one end inside the muzzle first.
Get your mind out of the gutter dude... and just make sure you choose the correct size rubber and use plenty of lube for easier insertion and to avoid a torn rubber. Also remember to go slow and have a good mushroom head and it'll last a long time
Another tip to get a better constrictor knot and a longer lasting rubber:
1. Once you have your loose constrictor knot, fasten one end of the line to a fixed point on your work bench.
2. Place the other end of the line around a screw driver or your insertion tool.
3. Lubricate the rubber and line so that it can slip around the rubber.
4. Pull the constrictor line tight and using your free hand, spin the rubber back in forth whilst gently pulling the line tighter.
This will give you a tighter constrictor and it wont tear the rubber.
Great video thankyou, I have recently bought a spear gun, both bands snapped when I took it out, I was gonna but new bands this way looks more easier and cheaper to buy and make your self than buying bands already made, I’m new to spear fishing and I’m glad I found this video, thanks again
Ficou errado como vai passa ela no arbalete meu cabeçote não e vazado
Fantastic video easy and simple.. cheers...
It's actually a "constrictor knot" if you notice how the working end is run under the other side of the knot as opposed to the side a clove hitch would be.
ihgyu
Thanks I have a vintage bazooka and was wondering what size rubbers it needs!
What a nice and very informative video
خیلی عالی بود، تشکر فراوان ♥
شكراً لك ،
فيديو توضيحي ممتاز
Thank you very much 👍👍👍
Thanks for the tip. What do you could you inserted in the rubber hole? Regards from Philippines
can you just use dyneema for the constrictor knot?
Anything around 2mm or smaller would be fine.
Builders string is what I use. It’s cheap and you get a lot on a roll
if you have a smaller gun?like 85cm gun.do you need to use the 55cm rubber or subtract it by 10?thanks
Nice job
how much
where or how do i get or make the bridals?
What could I use instead of the proper tieing string.
i always use paracors 550, works like a charm!
Maaf mau tanyak berapa harga per meterny Tante
how to buy a rubber of speargun
i here at the Philippine s
There is a close up at the end that show exactly how to tie the knot.
is that spectra line your using to tie the band?
thanks for the useful video
How do u attach the euro style bridle where the end bit that goes inside the rubber is much bigger?
Hi There!
Are u using a waxed cord right?!?
Is it 2 mm?
Tks
Very good!
Tqvm
Thankyou soo much
I like that it's good simple 😜 how much your speargun
Muito bom! Me ajudou demais.
And don't forget if you gonna use a double band muzzle, the first one you can use a bench the second one you gonna need to put one end inside the muzzle first.
Squalo I had to cut a little bit at the end to get mINE on Hopefully I haven't wrecked it had just enough to do another one for the second one
thank you !!
Ese lente los arpones
สวยและกอเก่งดีครับ
Thanis for share Your nollige.
Awesome video, thank you. I have to ask though, was I the only one that thought there was a lot of sexual innuendos?
Get your mind out of the gutter dude... and just make sure you choose the correct size rubber and use plenty of lube for easier insertion and to avoid a torn rubber. Also remember to go slow and have a good mushroom head and it'll last a long time
👍
you are Nice i love what are you doing 😍😍😍
thank's.......
the knot is called a half hitch..great demo..
Nope, it is close tho.
Show
I did it myself. I used Woodglut woodworking plans for this.
Just think how pissed off people would be if having a speargun is a crime in a COUNTRY by the law!! -.-
most of those countries are fine with a Hawaiian sling
top
😍
Then what?
terrrible video, the hand covers the most critcal part of tying the knot
That so called constriction not is actually called a clove hitch
noice!
Can you give me a Speargun please ❣️
Overpriced hard to find
like
Was not a video about "how to make" but "how to assemble"
1nd