Anything from steve Lindsay is well worth the money. I made 1 purchase a couple years ago and I'm never buying anything from anyone else other than Lindsay. I have both this airgraver featured in the video and a classic palm control costing over 3k. I worked 2 months straight just to buy it and it was more than worth it.
Alamo Armed Civilians, we are really glad you like the products and we are glad you like the content with Steve Lindsey. We hope you continue to watch our videos!
I've been using a BenchJewel for about a year and a half now, and it was hands down the most important and beneficial investment I've made for my engraving work bench. It cuts anything from copper to titanium with no issues at all. Always runs consistently and never needs adjustment.
Hello, the minimum pressure is 60 psi. The ideal pressure is between 65 and 100 psi. The higher the pressure, the more power you can achieve and the better the performance. We hope this helps, let us know if you have any other questions!
Well shit, I'm 17 and was looking to get into engraving my rings but it seems like I'll have to figure out another way to do it. If you have any recommendations on beginner tools please let me know
It’s not easy, but you can just buy old school hand engravers for like 15$ including the handle. It’s a skill, it’s gonna take hours of practice, but hand engravers aren’t expensive. You’re just looking at like, the height of the industry right here. Both tools will do the same job, but this one makes it many, many times easier.
Young man. No easy or cheap way around this type of equipment. Lowest cost in this hobby/professional tools will be --ballmark-- usd3,5k --9k. Asian copies few hundred dollars but best reckoning of many who own them is poor 'dependability', needing repairs etc. An option could be used flex shaft or micromotor type equipment which will need to be mastered well to produce decent quality --but not as classy as hand engraving push cutting or air gravers--. Think well before parting with your $$$. Gd luck, regardless
Hello, here is the link to the Lindsay BenchJewel® ArtGraver™ Set on our website. Let us know if you have any other questions! www.riogrande.com/product/lindsay-benchjewel-artgraver-set/118222
If it provide smooth curing surface ?And else if trained hand can lose profession ability in systematic use of it . Believe real master doubt about it ..
Anything from steve Lindsay is well worth the money. I made 1 purchase a couple years ago and I'm never buying anything from anyone else other than Lindsay. I have both this airgraver featured in the video and a classic palm control costing over 3k. I worked 2 months straight just to buy it and it was more than worth it.
Alamo Armed Civilians, we are really glad you like the products and we are glad you like the content with Steve Lindsey. We hope you continue to watch our videos!
كيف طريق شراء
I've been using a BenchJewel for about a year and a half now, and it was hands down the most important and beneficial investment I've made for my engraving work bench. It cuts anything from copper to titanium with no issues at all. Always runs consistently and never needs adjustment.
Hey..I'd like to know what's the cost of one..
1,071 USD I think
Very nice information and explanation
Thank you for the kind words! We are glad you liked the video!
Anytime Rio makes a video about a tool, you know itll cost at least 1k. Looks like a sweet tool for engravers though.
Right on the $; cost for the initial setup is $1,071 !
This looks amazing! Is this the same tool I see people use for bezel setting where they use a modified tip? Thanks Phil! 💜
Sir. What is the minimum pressure to operate the grever.
My newly purchased didn't work at 35 psi.
Hello, the minimum pressure is 60 psi. The ideal pressure is between 65 and 100 psi. The higher the pressure, the more power you can achieve and the better the performance.
We hope this helps, let us know if you have any other questions!
Thanks a lot sir. this help answer my question.
God bless you
thanks phil!
where do i get the in-line air filter, it wasn't mentioned anywhere.
This dude was so mellow in his presentation when he said " I'm excited to present" I couldn't tell if he was or not a real professional
Waw... it's amazing tool!!!!
Recently watched AMbros Video Where he made it With a Raw bolt..This is osm
Hey there. Glad you liked it!
What air filter would you recommend using? Does it matter if you use a type of air compressor?
Hi i m gaurav. From engraver india. Want to know what is the best way to buy one set
Sir I want to come and learn from you
Will this be usable on mild steel?
Yes, this works on mild steel, gold, silver, brass, bronze and copper. We have used it on steel before and it works like a dream.
Well shit, I'm 17 and was looking to get into engraving my rings but it seems like I'll have to figure out another way to do it. If you have any recommendations on beginner tools please let me know
It’s not easy, but you can just buy old school hand engravers for like 15$ including the handle.
It’s a skill, it’s gonna take hours of practice, but hand engravers aren’t expensive. You’re just looking at like, the height of the industry right here.
Both tools will do the same job, but this one makes it many, many times easier.
Can we set fragile gemstone like emerald, Selenite, Maxixe etc with this tool, what is the price for it in India and location to get it?
How much are these machines? Thank you
I have an air engraver hand piece .I did connect it to a compressor air but it is not working ,is any wrong with air supply?
Young man. No easy or cheap way around this type of equipment. Lowest cost in this hobby/professional tools will be --ballmark-- usd3,5k --9k. Asian copies few hundred dollars but best reckoning of many who own them is poor 'dependability', needing repairs etc.
An option could be used flex shaft or micromotor type equipment which will need to be mastered well to produce decent quality --but not as classy as hand engraving push cutting or air gravers--. Think well before parting with your $$$. Gd luck, regardless
I need this tool engraver
We think it's a great machine, and you can find it to purchase here: ow.ly/i4rd50F1oXY
From where i can buy this machine?
Hello! You can purchase the supplies mentioned here on our website. The ArtGraver set is here: ow.ly/i4rd50F1oXY
I am from Pakistan plz tell me how can I purchase this and plz tell me price
What does this set up cost?
Thx
How many years ago this model was launched pls reply me
Thank you for the question. Here is a link to the product with more info: ow.ly/i4rd50F1oXY
I want machine with this
I love my Lindsey palm control l , recommend it to anyone.👏👏👍🇦🇺🐈⬛💩
can you engrave stainless steel?
Yep. Works great on stainless.
I want this pen
Tariq Wani, her is the direct link to it! www.riogrande.com/product/lindsay-benchjewel-artgraver-set/118222
Where can i order it ?
Hello! All products used in this video are linked in the description box above.
@@RioGrande1944 ok thanks i check it
I need this tools plzz sir
How much cost this
How can i buy it pls
Hello! There is a link to the product in our bio.
How much price this hand pic
Hello! Links to the products featured in the video are in the show description.
how to get the tool sir, do you sell it 🙏🙏 sorry
Hello, here is the link to the Lindsay BenchJewel® ArtGraver™ Set on our website. Let us know if you have any other questions! www.riogrande.com/product/lindsay-benchjewel-artgraver-set/118222
Chinese knock off costs about $200 but you have to replace or repair every other year. Tips are Tops.
I need this tool
Ok I need this tool
Where do u get it from
Engraved mechine price
pls send me this model link
Thank you for the message. There are product links in the video.
What price masin
Thank you for the question. There is a link to the product in the show notes.
how much for engrave machine in Indian rupees
It works out a 560,000,000,000 rupees .. Hope this helps and let me know how many you'd like ?.. If you buy 25 you get one free !!!😘
hi
Engraver machine price
You can find it here, ow.ly/i4rd50F1oXY
Get hand graver(use old Swiss file) and it will do the same job if you can’t use hand push ones no point to buy air compressor piece 🙈😂
Good for pakistan
I want my 200 dollars of silver i paid for from rio grande but never received
Please reach out to our customer service team to help you this: www.riogrande.com/contact-us/
Yikes over a grand.
You don’t look very excited do you
If it provide smooth curing surface ?And else if trained hand can lose profession ability in systematic use of it . Believe real master doubt about it ..
I need to stool
Wait a few weeks and im sure the Chinese will have one out for 20 bucks 😏
Too much money