How to make pneumatic engraving machine from a mechanical center punch.
Вставка
- Опубліковано 17 чер 2021
- In this video I show how I make a pneumatic engraving machine.
I made this engraving machine for informational purposes only. I've always wanted to try engraving metal with a pneumatic graver. But this tool is expensive. Buying it just to try it is not a cheap pleasure. Therefore, I decided to make a pneumatic grader myself. To do this, I purchased a mechanical center punch for $ 4. I used the automatic center punch as the basis for the body of the pneumatic engraver.
Conclusion: such a tool cannot be used for serious metal engraving work. But it is suitable for informational purposes, in order to simply understand the very principle of operation of a pneumatic engraver. And satisfy your own curiosity.
I wish you a pleasant viewing.
For those who want to support the channel:
/ kirill_runz - Наука та технологія
Over the years I acquired and sold some really old and unique items that would have increased tremendously in value if I had been skilled at engraving. Now, nearing the end of my time it's a bit too late to start learning. But, watching your videos gives me the pleasure of seeing how my ideas would've turned out if I had your skills at a younger age and that pleases me immensely!
Its never too late to do what you want. I hope you can achieve and make beautiful things in your time..
I beg you to try anyway! Dont live with the what if!
Smart dude. Good video. Love it when there’s no talk and especially no stupid music. Good job young man. Thank you
Omg. Genius! Pure genius! Amazing to witness such creativity!!!
Brilliant. I bought a few of these punches a while ago with a view to attempting this, but never got round to it. Thanks for sharing how you did it.
Thank you for your attention. I wish you creative success.
Seems we like same things 😂😂😂😂😂
@@henrysscrollsawworks6917 Seems so 😂 We both turn up in some pretty obscure places too. lol
@@danceswithaardvarks3284 it's all good lol
I made one from a vibro engraving tool with the pointy bit ground to a flat chisel edge........I used it for getting into small places to remove burrs.........I think it can also be used to impress or punch a design like numbers or letters into soft metal like copper, aluminium or even brass.
Ufff, que nivel de trabajo!!
Дааааа, ну ты камрад КРАСАВА. Умница. Успехов.
Piękna robota. Pozdrawiam 👍 😉
Sensacional !!!! Estou sem palavras.
God damn how is this channel only at 80k subs? THE WORLD NEEDS TO KNOW! This is fuckin genius!
Обожнюю ваші роботи, дивлюсь кожне відео. Бажаю натхнення для інших прекрасних ідей :)
Дякую Вам за увагу.
Boa ideia e muito bem feito,parabéns.
Amigo, saludos desde México, tengo una duda, con el compresor grande si funciona bien el invento que isiste?.
This is genius!
Brilliant design
Well done 👍👍👍. Thanks for sharing
Thank you for your attention.
Loved the video have had the same idea before just didn't know how to make it work .I kind of get it now .
Thank you for your attention to my work.
somewhat similar to the physics for tattoo machines, instead of electric hidraulic, but the funny thing, the most similar thing in common, is how noisy both methods are hehehe, I wonder how far is it possible, at that scale, just using compressed air, having features that would allow control the strength and depth of the cut - so beautiful stuff there ))) keep it up
Привет из Новороссийска!
Ставлю лайк не досмотрев до конца!
Ещё один привет из Новороссийска👋👍
Спасибо за Ваше внимание. Привет из Сум.
И ещë один привет из Новороссийска, не ожидал.
Отлично.Сколько вариантов видел на просторах интернета,но Ваш прям уникален.
Спасибо)
Love DIY UA-cams like when where everything looks like it idle going well then, WHAM! a finger or thumb suddenly has a bandage. It’s not that I relish another’s pain, it just adds realism. I have a blood blister on the top of a finger now because the ends of a pulse slipped and grabbed my poorly placed finger.
This is cool!! I LIKE TO try new ideas,.....do you give out the dimensions on how to build one?
nice sharing, thank.
Ждём новых работ!!!
😲 you cool 👏👏👏👏 nice job 💯👍
Excelente, se ve bueno. Lo intentaré, creo que intentaré replicarlo. Cuánto PSI usas para su funcionamiento? Haz fabricado algún pedal para accionarlo?
Muchas gracias por compartir tu fabricación.
Gracias por enseñar como hacer u na herramienta de estas, mi duda es, tengo que modificar el compresor para que impulse y succione o simplemente funciona con aplicar aire a la herramienta? Agrdesere tu informacion, saludos
Gracias por su atención a mi trabajo. Gracias por tu comentario. Este neumograbador funciona con presión de aire constante. Para esta herramienta, no necesita rehacer el compresor. Pero este grabador neumático se hizo solo como un experimento. No fue duradero.
Brilliant
Nice video
try using the spinning plynth as an engraving vice
Would like to see a much more detailed video
Bonjour ! Super vidéo et bonne idée de détourner un le pointeau automatique pour ta réalisation. Elle à l'air de bien fonctionner pourtant tu ne semble pas satisfais. Aurais tu des plans pour cette réalisation j'aimerais tenter cette l'expérience mais je ne comprends pas le cheminement de l'air dans l'outil pour le va et vient avec un flux d'air constant ? Bonne continuation.
ingenious
Good job mister
Thank you for your attention.
Good night, I have a doubt. I see some videos that use a modified compressor to pull and push the piston and yours is just compressed air. how did you do it? I'm racking my brains a lot.
Your are the best!!!!
Золотые руки у тебя.
Спасибо.
Полезно👍
Респект и уважение мастеру :)
Спасибо за Ваше внимание.
I think you’re going to find that the vibration of the tool is going to cause early stress induced cracks and failures. I hope you have great success.
Thanks for sharing
Thank you for your attention.
I have watched videos like this trying to discover if the air source is alternating or direct pressure. Many of them are alternating and they show you how to modify a tyre inflator to provide alternating pressure. But it seems hardly anyone comments on the way the engraver works. In this video you make it clear a larger compressor is better but does it provide normal direct air pressure or have you modified it to supply alternating pressure? Is there such a thing as a direct pressure engraver?
Fantastico! Pero no llego a entender como el embolo sube y baja con un chorro de aire continuo...
Gracias por su atención a mi trabajo. Gracias por el comentario. Los orificios de aire en el pistón se superponen y se abren alternativamente a medida que se mueve el pistón. Por lo tanto, el aire se redirige al área debajo del pistón, luego al área por encima del pistón. Así es como se mueve el pistón.
Cool.
Thank you
precio de tu máquina para Dibujar en acero.?
Is that just a motor with a chuck attached to it? the square horizontal drill with grinding wheel on it?
Fantastic. is it possible to see a drawing to understand the method of operation? Thank you
Air pushes into the chamber inside the brass handle, filling that chamber and pushing out the spring-assisted-return internal "pin". The pin moves forward and releases chamber air through it's forward hole, letting it return into the brass chamber, to get pushed forward again and release air.....
How does the mechanism work? I don't understand how it reciprocates, unless you put a spring back in. A close-up or assembly video with explanation would be amazing. Thanks!
Thank you for your attention. A spring is not needed in this design. I put it as an addition. The principle itself is that air passes through the holes in the piston, and moves the piston up and down. In one of the following videos, I will probably make a detailed analysis of this mechanism and make a drawing.
@@KirillRunz have you converted the compressor to blow and suck?
@@KirillRunz I am looking forward to more information on how the air makes the piston move up and down. I have looked at the video several times and I can not figure it out.
@@tattoo45uk no he didn't for this specific piece. It's designed for constant air pressure (blow only)
@@BengtRosini13then how can it possibly reciprocate? It seems that only pressure all the time would just push and never retract.
Super pomysł ✌️🤓
👍👍👍tnx
Здравствуйте! А будет такой штихель работать от помпы тонометра?
Muchas gracias por su respuesta tan valiosa, funciona como un martillo neumatico, tengo los planos de un grabador neumatico en AUTOCAD, es cuetion de llevarlos con un tornero, cuendo guste se los comparto, en air graver estan muy pero muy caros, estoy para servirle
Gracias por su atención a mi trabajo. Saludos desde Ucrania. Te deseo éxito.
Me interesan los planos para hacer el proyecto, como te puedo contactar?
Excellent job. We shared this video in our homemade tools forum this week :)
Thank you for your attention. I appreciate it.
I see the next few etchings will be much enhanced by this tool.
Thank you for your attention. I'm working on it.
geniale.....
Здравствуйте...
Дайте пожалуйста ссылку , где вы приобрели сам кернер...
how is this better then a normal enraving spade?
Cool!
круто придумал
Спасибо.
Nice man.. "Einstein" nivel.. 😂😂💪💪💪
Sounds like a mini gun or fire storm canon on a battleship
Спокойной ночи друг, подскажите, компрессор ли вы доработали? Или этот оригинал, я уже готовлюсь смотреть ваше видео, привет из Мексики.
i notice again, the points the points that are fixed with cyanoacrylate instant glue adhesives how safe they are in the long run ?
You did it nicely. It is good to use the already existing tools and redo a little. This idea has long been developed with large pneumatic hammers. Steve Lindsay did it perfectly (perfectly). Only his products are terribly expensive. I also did it out of curiosity and this is an excellent method. I used an sds drill to make the piston. I hardened, drilled and hardened.
But now I'm using Sergei Valtman's graver system.
A little more detail would be helpful?
А может быть, всё таки, добавишь к травлению небольшие штрихи гравировкой? Думаю, будет интересно. Успехов.
Спасибо. Работаю над этим.
I could figure out most of it. Just that where is the location of the hole in the body for air inlet ? Does the piston cross it? If you could just show a hand drawing of the working mechanism, would be great. Rest of the video is self explanatory. Cheers.
🫂 чудова робота
Top
Super to jest
Have you construktion drawings ?
Отлично!!!!
А что за линза у Вас для макро съёмки?
Линза из китайского набора из 3-х линз для смартфона. Одна из линз - макро. Точное название не знаю.
do you sell that tool ..sir 🙏🙏
Am I able to purchase?
Подскажите я не понял это прямоточный?
Did you have to modify the bigger Air compressor please????thanks in advance
Thank you for your attention. Not.
Could you be more specific on if you modified the air compressor your statement didn't make any sense thanks
It's not modified, the aircompressor just blows out compressed air. There is no blow and suck action like some designs need.
@@oniemarc_engraving thanks very much
У вас есть такой изделия для продажи
главное всё молча Ништяк
Esaka name kya he
1:00 hey master ,may i know the size of it?
👍👍👍
Хера себе, круто!
Спасибо.
Cool gibt es da eine Skizze?
Thank you for your attention. Not yet.
I wish u would narrate the why, do's
& don'ts.
👍🏻 WOW! 😉 👍🏻 👍🏻 👍🏻
I make like you but always fail, what's the right way mate?
Это же пневмоштихель!
Здравствуйте.А где купить хлорное железо и быстрое вароненние.
Здравствуйте. Я покупаю в интернете.
Спасибо.
😉👍
Hey I want to buy this machine , can you please help me ? How to this buy this?
Thank you. I appreciate your attention. This machine is not for sale. It was just an experiment. I don’t make such items to order.
Hello my dear brother, can you make a device for me?
Супер!
Спасибо.
А чертежи с размерами выложите пожалуйста,
Да красавиц Чего говорить.Да кстати вопрос Кирилл Подскажи как убрать вонь с железа после травли в солёной воде ,ато кухонный топорик испортит всё мясо😁😁
Я много мою металл в содовом растворе, а потом обрабатываю маслом, вонь после травления уходит но запах масла появляется:))) Можно попробовать чем-то пахучим намазать.
@@KirillRunz Привет Я уже ,,намазал,,😁 дремелем с маленьким пальчиковым камнем прийшлося стереть всю черноту заодно лучшие насадилось топопорище😁👍👍
Как по чертежей???
Te falto información del compresor
Цє ті молодец
3:28
What is that thing? could I make it?
This is the main fuel jet from a motorcycle carburetor.
@@KirillRunz Is that part different from a normal pipe?
Any other threaded tube can be used. I just had a ported carburetor at hand, and I unscrewed the part I needed from it.
@@KirillRunz Thank you very much.
Can you make me one?...
Бро а чо дремель никотируеться?