How to Replace Serpentine Belt, Tensioner, & Idler 2003-2021 Chevrolet Express
Вставка
- Опубліковано 18 лип 2022
- Buy Now!
New Drive Belt Component Kit from 1AAuto.com 1aau.to/ia/1AEEK01221
This video shows you how to install a serpentine belt, tensioner pulley and idler on your 2003-2021 Chevrolet Express. That squealing noise coming from your vehicle’s engine compartment could be a slipping belt, or it could be a bad pulley bearing, or both. A bad pulley could eventually damage the belt, which could create even further damage.
This process should be similar on the following vehicles:
2003 Chevrolet Express 3500
2004 Chevrolet Express 3500
2005 Chevrolet Express 3500
2006 Chevrolet Express 3500
2007 Chevrolet Express 3500
2008 Chevrolet Express 3500
2009 Chevrolet Express 3500
2010 Chevrolet Express 3500
2011 Chevrolet Express 3500
2012 Chevrolet Express 3500
2013 Chevrolet Express 3500
2014 Chevrolet Express 3500
2015 Chevrolet Express 3500
2016 Chevrolet Express 3500
2017 Chevrolet Express 3500
2018 Chevrolet Express 3500
2019 Chevrolet Express 3500
2020 Chevrolet Express 3500
2021 Chevrolet Express 3500
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa/1AXAA00013
• Pocket Screwdriver
• 10mm Socket 1aau.to/ob/1AXAA00017
• 13mm Socket 1aau.to/ob/1AXAA00015
• 15mm Socket 1aau.to/ob/1AXAA00015
• 8mm Socket 1aau.to/ob/1AXAA00017
• Trim Tool Set 1aau.to/oa/1AXXX00006
• Ratchet 1aau.to/oa/1AXAA00016
• Socket Extensions 1aau.to/ob/1AXAA00015
• Torque Wrench 1aau.to/oc/1AXAA00044
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Авто та транспорт
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
I did this Today 6/1/2024 on a 2019 Express 2500 6.0 Vortec … Spot On instructions 👍
Thank you so much. Got this done while on a road trip 🤘🏽
Thank you a lot man... we just changed the belt tensioner on my 2004 chevy express 2500, your video is very thorough and precise. Thank you!
Man this video was so freaking helpful I had to do a motor swap out of my 2500 heavy-duty GMC Sierra and the only mother I was able to locate that was a decent price was a 2004 Chevy 2500 Express van motor and I couldn't remember how my serpentine belt went thank you so much for the diaphragm
Muy buena tu esplicacion
Very good video easy to follow thank you
This video is great 👍👍👍👍 I do have a problem tho sadly. My oil filler neck hose won’t go back in its place. It’s is very hard to push that rubber gasket in, even when I put oil on the gasket, it still ask stubborn to go in. Any suggestions?
NEVER EVER start a bolt with a power tool! Turn by hand 720° first; THEN use a power tool
Thank you for you help appreciate it. God bless.
Thanks 😊
Can you please provide the length of the belt I need?
I extremely absolutely very much no matter what cannot slide the new belt onto the idler pulley
Than you
Bonjour je suis français et je possède un Chevrolet express 6.0 v8, Comment dois-je m’y prendre pour remplir le système de refroidissement, dois-je le remplir par le bocal de liquide de refroidissement,
Ou par le bouchon du radiateur
What a Fookn nightmare, im a D mech and did my Expedition in 10 mins..
Holy cow looks like a nightmare lol not really but pretty tedious
So the dealer quoted me 3 hours @ $210 an hour, plus $117 for the part to do this job, almost $750, and your video is 15 minutes? Are you saying this job only takes 15 minutes?
How do you know it’s your tensioner/pulley? Was it making noises?