Great video. I was using the same cooler but black and different CPU, 7700x. My temps were way to high at idle and gaming. I noticed that there was very little resistance/mounting pressure when tightening the cooler down. Come to find out the mounting brackets were bending up and not pulling the cooler down onto the CPU to have adequate mounting pressure. I switched it out for a DeepCool AN 600 and adjusted the spine to accommodate the height difference. My temps were way better.
love the sffpc, i build myselft a a4-h2o from lian li but aircooled instead of AIO, thinking of shrinking it more in the future to a velka 7 or something like sub 7lts. its an awesome feeling. nice build man and do more of these.
Finally found an all AMD build! Thanks you! Tired of the influencers only using ngreedia gpus. Question, by any chance, do you have a Sapphire Pulse 7900xtx to try in this case?
I was able to shoehorn the Sapphire Nitro+ 7900 XTX into my Fractal Terra but the cpu cooler the Thermalright AXP90-X53 sticks out prohibiting the side panel from being placed back on that side of the case. I have obtained an Alpenfohn Black Ridge cooler and a set of G Skill FlareX DDR5-6000 CL30 low profile ram which I will install in place of the Thermalright. I also have a Corsair SL850L PSU but the cables were taking up too much space and included smaller than standard connectors that plug into the psu, so I discovered that Cablemods makes cables specifically for psu but not in a length suitable for the Terra. I had to find a metric ruler and use the measurements of custom cables I had for my FormD T1 from pslatecustoms to enter into the configurator when selecting the cables I wanted for my build. I may swap to a reference designed XTX if I have the same issues with the Alpenfohn cooler. The case is great I have no real gripes about it even though I was looking to use a 240mm AIO and this case wasn't designed with that option in mind.
wow really? i didn't think one of those could make it in there that's crazy. those cablemod lines should be nice, lmk how it ends up! thanks for checking out my content!
This case looks amazing. My only concerns are about noice levels when its that close on a desk, and thermals. I assume the case gets hot when it is that small?
oh really? yeah i have cooling equipment ranging from entry to enthusiast. on the entry-ish side, i've been using their stuff for a bit and have always gotten more than what i expected considering their costs. interesting
@@pyurologie yeah I just got confused with the motherboard. If you notice there's a port in the upper left (lower left if placed in the fractal) what's that for? I only know of the atx plug
How are the acoustics on it, I've heard the terra can have a really nasty sounding whistle if the CPU cooler is too close to the case causing a lot of really loud turbulence
I want to build this exact same pc but replace the CPU cooler with a Scythe Big Shuriken Rev B (67mm in height vs your 55mm, 12mm difference). Do you think that would be possible if I scootched the GPU a little more to create some more space? I loved the vid btw
@@pyurologie wow thank you so much for the quick reply. I think I'm gonna settle for the same cooler you have but switch the fan out with a noctua nf-a12x25.
Hey pyuro, have been looking at your videos a lot after buying terra case. Just wondering, will Hyperx fury rgb beast fit together with ID Cooling IS-55? Thanks!
thank you so much for checking out my content! im not familiar with those particular sticks but i can measure the clearance for you and post it later so you can compare it to the ram measurement.
hi, i made this and then tore it apart soon after. But, many people have asked so I'm gonna put it back together for noise and heat tests. It does get toasty especially if you put a high powered card in there. Were you looking to see with a 7900XTX in there?
Do you know if I have the XFX radeon rx7900xtx MERC310 gpu instead of your powercolor rx7900xtx if it will fit in this configuration in this fractal terra itx case? Assuming the other components are the same
A lot of people have been asking that, but I didn't do much noise/thermal testing when i built it. The XTX generally runs pretty hot though, so the fans were going and it wasn't exactly quiet when gaming on high graphics settings in 1440 and above. I'm putting another Terra together along with a Hyte Revolt 3 config. Thermal and noise testing will be included this time around. The videos should be out shortly. Thanks for checking out my video though.
Hi can you do a benchmark of 7800x3d/7900 XTX on rust in 1440p performance/medium/high settings? I'm contemplating between getting a 4080S or a 7900XTX but don't know which will pair better for rust with the 7800X3D. Also will be playing mostly 1440p. Also, do you know if the 7950x3d is significantly faster in rust and worth upgrading to?
Just casually pulls out a couple grand in GPUs.
Great video. I was using the same cooler but black and different CPU, 7700x. My temps were way to high at idle and gaming. I noticed that there was very little resistance/mounting pressure when tightening the cooler down. Come to find out the mounting brackets were bending up and not pulling the cooler down onto the CPU to have adequate mounting pressure. I switched it out for a DeepCool AN 600 and adjusted the spine to accommodate the height difference. My temps were way better.
good to know thanks for sharing!
Whats temps were you getting when gaming?
@@thatonegamer2709 , around 80c with the is-55 and low to mid 70s with the an600.
love the sffpc, i build myselft a a4-h2o from lian li but aircooled instead of AIO, thinking of shrinking it more in the future to a velka 7 or something like sub 7lts. its an awesome feeling. nice build man and do more of these.
nice, that's a great looking case too! yes, i agree SFF is soooo satisfying
but why would you air cool in a case designed for an aio
You used the secondary SSD slot. this mobo has two SSD slots. The primary one is under the small black fan south of the CPU
yeah realized that later haha
YO YOUVE GOT MY MOUSE THATS WILD
I been aim trainin a year, hit voltaic master, and tiny pcs fit tiny mouse im already in a nr200p
HSK Pro 4K gang lets gooooo! nice!
Finally found an all AMD build!
Thanks you!
Tired of the influencers only using ngreedia gpus.
Question, by any chance, do you have a Sapphire Pulse 7900xtx to try in this case?
AMD FTW 👊 sorry i dont have a sapphite XTX
a diffrent pc case, refreshing
thank you! 🙏
Very nice looking case, great color too. Wanted one but in the end didn't seem worth the limitations and compromises needed. For gaming at least.
Waiting full tests of this sistem in different games. I think that in aaa games 7800x3d will be hot for this cooler. And sintetic tests if you can. ❤
coming soon
@@pyurologie love you
@@dinova3398 💚
Do you have an update on when we can expect this? :) I'm considering building a similar pc. ^^@@pyurologie
2nd this,@@pyurologie I'd love to see a thermals/noise/performance test.
I was able to shoehorn the Sapphire Nitro+ 7900 XTX into my Fractal Terra but the cpu cooler the Thermalright AXP90-X53 sticks out prohibiting the side panel from being placed back on that side of the case. I have obtained an Alpenfohn Black Ridge cooler and a set of G Skill FlareX DDR5-6000 CL30 low profile ram which I will install in place of the Thermalright. I also have a Corsair SL850L PSU but the cables were taking up too much space and included smaller than standard connectors that plug into the psu, so I discovered that Cablemods makes cables specifically for psu but not in a length suitable for the Terra. I had to find a metric ruler and use the measurements of custom cables I had for my FormD T1 from pslatecustoms to enter into the configurator when selecting the cables I wanted for my build. I may swap to a reference designed XTX if I have the same issues with the Alpenfohn cooler. The case is great I have no real gripes about it even though I was looking to use a 240mm AIO and this case wasn't designed with that option in mind.
wow really? i didn't think one of those could make it in there that's crazy. those cablemod lines should be nice, lmk how it ends up! thanks for checking out my content!
This case looks amazing. My only concerns are about noice levels when its that close on a desk, and thermals. I assume the case gets hot when it is that small?
it can get a bit noisy and hot with a powerful card like the XTX, which tends to run very hot. newer gen cards that use less juice arent as bad
Some people have reported annoyig turbulence with the Terra. How's your experience in this regard? Have you lisented your system at full load?
I didn't experience that, but I only used it for a bit. I'll fire it back up and see.
Been trying ID-Cooling and I haven't had much luck with their products... that is a damn good lookin' case though!
oh really? yeah i have cooling equipment ranging from entry to enthusiast. on the entry-ish side, i've been using their stuff for a bit and have always gotten more than what i expected considering their costs. interesting
@@pyurologie I think it is hit and miss with the models, I'm seeing across multiple reviews. I'll tell ya, IS-47K is indeed trash though
gotcha good to know
didn't you know that the main m.2 slot is under that fan heat sink?
i didn't bother to look under the heat sink at the time but yeah i found out later
@@pyurologie 😜.
hehe
This is the exact build im planning im doing and am curious if tempts with a 7900 xtx
hi sorry just seeing this comment now, but i'm gonna do some noise and heat tests with the terra soon. the XTX does get toasty in there tho
@pyurologie
Lemme know how it goes, I have my terra build but I kept my 3080 and honestly doubt I will upgrade now
it was a good video, but the cable setup was kinda confusing as you skipped most of that part.
what's your question? it's not too complicated.. just squeeze them where they fit lol
@@pyurologie yeah I just got confused with the motherboard. If you notice there's a port in the upper left (lower left if placed in the fractal) what's that for? I only know of the atx plug
@youredxspanktube ohh ok im pretty sure thats the CPU 4+4 connector
@@pyurologie okay, do I need to plug that to the psu?
@@pyurologie cause I only plugged the atx pin at the side
How are the acoustics on it, I've heard the terra can have a really nasty sounding whistle if the CPU cooler is too close to the case causing a lot of really loud turbulence
You are the best
YOU'RE the best
I want to build this exact same pc but replace the CPU cooler with a Scythe Big Shuriken Rev B (67mm in height vs your 55mm, 12mm difference). Do you think that would be possible if I scootched the GPU a little more to create some more space? I loved the vid btw
yes, i forgot there's an adjustable spine. I have about 8-9mm of clearance right now but I could slide the GPU a tiny bit to squeeze it probably
@@pyurologie wow thank you so much for the quick reply. I think I'm gonna settle for the same cooler you have but switch the fan out with a noctua nf-a12x25.
no problem, thanks for checking out my content! Yes, great idea that will be a nice quiet cooler
@@kianmatiku8913 yeah i ran the axp120-67 worked very well, with a 2 slot gpu
@@kianmatiku8913 go the nf-a12x15, the 25 shows now thermal improvement on that cooler
You think you could get a 67mm tall CPU cooler in there?
You think the sf750 from Corsair would handle this type of computer
probably. any standard air cooler is usually enough for the X3D
@@pyurologieSf750 is a psu. Yes it will handle this gpu cpu combo
@@sachan9081 oops good call
Hey pyuro, have been looking at your videos a lot after buying terra case. Just wondering, will Hyperx fury rgb beast fit together with ID Cooling IS-55? Thanks!
thank you so much for checking out my content! im not familiar with those particular sticks but i can measure the clearance for you and post it later so you can compare it to the ram measurement.
@@pyurologie Absolutely! Thank you so much for doing so. Looking forward for it! Much love from Malaysia🥰
@@sandwichlee hi sorry i totally forgot to message you back. There's about 45mm of clearance for RAM with the IS-55 in my setup
@@pyurologie hey pyuro! I see, thanks for the help. I appreciate ya! 😊
Do you think a Noctua NH-L12 will fit? Same CPU and GPU combo...
seems like others have used the cooler in terra builds, i'd check clearance with your mobo and RAM to be sure
Were you able to get any benchmarks on this with heat etc? I’d like to do a similar build but not sure it can handle the confined space.
hi, i made this and then tore it apart soon after. But, many people have asked so I'm gonna put it back together for noise and heat tests. It does get toasty especially if you put a high powered card in there. Were you looking to see with a 7900XTX in there?
@@pyurologieYes I was looking at using both the 7800x3d CPU.. and the 7900 XTX..
@@colbymerchlewitz1453 I'm interested in this too.
Any info on what temps you are seeing on your CPU and GPU ?
hi, i didn't really show that here, but i'll do a follow up with performance numbers! thanks for checking it out
Do you know if I have the XFX radeon rx7900xtx MERC310 gpu instead of your powercolor rx7900xtx if it will fit in this configuration in this fractal terra itx case? Assuming the other components are the same
check the length of the MERC, the longer models tend to not fit in this case. you get about 322mm or 12.7in of room in the terra.
So could you use a Seagate 5TB 2.5” HDD for storage rather than a second SSD drive ? ?
Hey do you think an SFX would be easier to install than an SFX-L ?
it wouldn't hurt, SFX form factor would likely give you about 30mm of extra space for routing wires over an SFX-L
@@pyurologie Thanks Happy Holidays
@@martinpalenik np thx for checking out my video! happy holidays to you as well hope you get to spend time with your loved ones
CPU, GPU & Room Temps when gaming? Thanks.
50 70 70
@@pyurologie 70c for the room temp?
@earlbond2929 lol sorry im in US, 70F
@@pyurologie So meaning cpu 50c gpu 70c room 70f is this correct?
correct
I’d cooling link is incorrect I think.
thanks for letting me know, fixed it now 👍
I want to swap my RTX 3080 X trio and 10900k but I don't know will it fit and cooling......
is it ok if I use an 850W Gold PSU instead of the platinum one from the video?
yes not a problem, platinum just means it's a little more efficient than gold but you will be fine
sweeeet
thanks!
dope build man ... love the case
thanks dudeeee!
Do you think another fan under the PSU is necessary?? Thank you brother
it depends on the GPU you're running I'd say. If you have a hotter card, it would be helpful. I'll be doing some more videos on my itx cases soon.
@@pyurologie I just bought the 7900xt sapphire pulse, think I can get away with no fan under the psu?
🔥🔥🔥
🚒
I'm curious: what watch are you wearing in this video?
hello, I'm wearing a Samsung Galaxy Watch5 Pro with a custom colored band and face cover
@@pyurologie Good choice! Looks great!
thank you!!
I'm building on this case with this motherboard tomorrow (my first build ever) . How is the bios version? It is beta
i had the Z690 MPG edge and it feels exactly the same. things worked fine, no issues with BIOS for me
Don't you wish there's a white 7900xtx available?
that would be amazing... hmm new video idea
Is there any chance to rotate cooler so ram won't be covered?
is there any turbulance nose from the fans because off the panels
not really much turbulence, but the thing does make a bit of fan noise when under load. I'll do a review of the case soon.
@@pyurologie oke. So what i mean is i saw when peoples closing the panel it makes a sound and when open its quiet
oh ok mine didn't sound any different open and closed that i can remember. i'll test that
@@pyurologie nice to hear.
What colour should i go for black , sirlver or green. I have the founders edition.
i'm partial to the green as it's my fav color but i think they all look clean
Is there 850 psu ,it's enough for this system? (I just bought 7900xtx) and have same with your cpu
yes more than enough for this combo
@@pyurologie Okayyy thank you , Hope you enjoy with new wipe incoming 😄💫
lol the cute mouse
Dude it can handle the 7800x3d with the cpu cooler?
yeah i been 4k gaming on it
what's the noise like?
A lot of people have been asking that, but I didn't do much noise/thermal testing when i built it. The XTX generally runs pretty hot though, so the fans were going and it wasn't exactly quiet when gaming on high graphics settings in 1440 and above. I'm putting another Terra together along with a Hyte Revolt 3 config. Thermal and noise testing will be included this time around. The videos should be out shortly. Thanks for checking out my video though.
Hi can you do a benchmark of 7800x3d/7900 XTX on rust in 1440p performance/medium/high settings? I'm contemplating between getting a 4080S or a 7900XTX but don't know which will pair better for rust with the 7800X3D. Also will be playing mostly 1440p. Also, do you know if the 7950x3d is significantly faster in rust and worth upgrading to?
What keyboard was that?
ua-cam.com/video/-PxnnDzlv1g/v-deo.html keydous nj81 brass plate
Can someone tell me which alternative ram would fit into this build, so that I dont need to remove the heatsinks?
or you could use a cooler with different clearances as well
I personally went for IRDM PRO
What are your idle temps for the cpu?
took this config apart recently but i think it was around the 40s
🧢🧢🧢
Whats the total price of this build
around $2500-3000 as configured in this video. current prices with black friday are probably the best we'll see for a while