Це відео не доступне.
Перепрошуємо.
DJI Mavic Pro repairing and replacing the gimbal flexprint RIBBON CABLE after TEARDOWN
Вставка
- Опубліковано 4 чер 2017
- PARTS SOURCING on Amazon.com and Aliexpress:
AMAZON.COM:
gimbal ribbon cable: goo.gl/iRvYNM
complete replacement gimbal: goo.gl/UYqdLZ
camera sensor wire: goo.gl/bEkaxh
gimbal hanging plate: goo.gl/6SoHTF
anti-shock damping board: goo.gl/DJZ7zS
replacement upper shell: goo.gl/KN6Kz4
middle shell: goo.gl/MKvkGX
bottom shell: goo.gl/BZbXJy
left front motor/arm: goo.gl/vzeotC
left rear motor/arm: goo.gl/Uj6Bhh
right front motor arm: goo.gl/XJP7Z9
right rear motor/arm: goo.gl/swPauK
spare propellers: goo.gl/58Y98L
ALIEXPRESS:
i got the spare ribbon cable here: goo.gl/LyKtE3
complete gimbal: goo.gl/wHxsR6
camera sensor wire: goo.gl/1R6ns7
gimbal hanging plate: goo.gl/pxv3ev
anti-shock damping board: goo.gl/knQbpH
replacement upper shell: goo.gl/Pa2ght
middle shell: goo.gl/odW4jJ
bottom shell: goo.gl/D8CCP6
left front motor/arm: goo.gl/D5RF56
left rear motor/arm: goo.gl/kna5Pv
right front motor/arm: goo.gl/a6AqgN
right rear motor/arm: goo.gl/8Foj21
spare propellers: goo.gl/FxCMDk
my surprisingly successful replacement attempt of the ribbon cable in the mavic pro camera gimbal that connects all three gimbal motors to the gimbal control unit.
Crazy flying skills 👍🏼
good job my friend. super flying. thank you.
vikum from sri lanka
You are the master of flying Mavic Pro control.
Amazing eyes you got. I am impressed you can remember what part goes where - not least what _screw_ goes where!
Thank you for this very informative video!
hell of a pilot. afraid u will repair it again soon.
hehe :) i'm not the one who broke it in the first place!
Gday Peter. Some time ago you did a video on Mavic Pro prop guards. Is there a prop guard for the Mavic Pro that operates with the low noise props? Cheers. 🇦🇺
very good job, it helps me fix my gimbal too
Very helpful highly recommended
Good job man. I tried mine but I got no image 😂 that flying though.... dang!
How did you get the sticker from the top shell onto the new one?
Perfect for me !!!! thank you .... :)
This rflex fix saved my 3 hour of struggle
But my horizontal motor is not working also my video is also not working i think i have loss any cable ??
I replaced my ribbon cable with a new one. I met started well and I was happy it worked. Unfortunately, after flying for 20min, the same gimbal motor overload issue reappeared. And the gimbal gets hot really fast, only after starting the drone for 30sec it’s already very hot. I opened the gimbal again and tried fixing the ribbon cable. But it didn’t help. Any idea what else I could do? Replace the whole gimbal? Buy another ribbon cable from another company? Thanks
Sorry for my poor English expression ... I crashed my pro mavir in a tree and the elastic that hold the camera are torn. I saw on one video that someone repaired it with string. Shall I dismantle everything to try a repair like him? Is there a way to get these elastics? Thank you for your answer
good job!
Thank you so much for your video . I am going to fix my Mavic too .Hope my mavic can fly again.lol
What about the black silicon that holds the ribbon cable connections in place from the factory. Do you not have to reapply the Silicone Glue when installing the new ribbon?
since its not critical for flying i didnt bother. so far it's not been a problem
Hello!
I have a question.
After you change the ribbon cable, is necessary to do a calibration of the camera? or something like that?
Thanks you so much!
if you notice a tilted horizon or something abnormal you should recalibrate - it never hurts to recalibrate
Good Job..
Thanks for doing this video. Very helpful. Also you are an awesome pilot!
from where did u buyed your tools ? my drone just crashed and i guess i have the same problem with the motors also the cable seems a little bit damaged... hope it gets fine..
you mean the spare cable or the screwdriver tools? cable can be shopped here goo.gl/LyKtE3
In your opinion, would be possible to put this gimbal-camera on a custom frame instead of using the usual Gopro or a bigger camera?
I am thinking about this, but I do not have the expertise to do it.
Would be a good solution to have a lighter frame, size 680 or bigger, to have more flight time and still good enough pictures and video quality and funtionality.
the thing is that the mavic camera definately needs the mainboard of the mavic to work. So you wold have to swap a whole bunch of pcbs and electronics from the mavic frame to your other frame. i dont know if you would still have the benefit of the weight anymore then
What tools do you need to disassemble? Besides the hex screws, what kind of plastic clip removers, or whatever you call it, does one need? *PLEASE* get back to me ASAP* !! Thank you. I need to do a repair, however, I'm not sure exactly what it is I need. *PLEASE HELP* !!!!!
just a screwdriver with the different tips
that gets a subscribe from me . and i groove on the flying skills! Can you tell me what mode do you fly in full and dumbed down or full speed mode? or what ever one because it seemed real responsive to stoping and turning without a lag.? please let me know your settings .gain nice flying skills
thank you. i'm pretty sure it was normal P mode. definitely stock gain settings.
Mantap sekali
with kind of flying and wonder u know how fix it..
Hi thank you four your video I have a Mavic Pro and now is Said remove the clamp the camera is hoverloding what you thing it is thank you very much
this will come up if a motor current is too high for example when something is blocking one or several gimbal motors. or if you have som sort of short circuit in one of the motor phases.
ello guys, long story short, crashed my mavic, powered it on, received overloaded motor (gimbal didnt move at all) i get video tho.
Ordered gimbal cable from FS LABS, replaced it, the gimbal moves but i still get overloaded errror and the gimbal doesnt follow controller commands (up / down)
Bad cable? something else damaged? Please help, im desperate.
BTW, after cable was replaced the camera body is getting extremely hot. is that normal? You know we start to see / feel weird/new stuff when we break something and try to repair it.
Hi. Did you solve your mavic problem? I'm in the same situation.
what are the cables (from the drone body) called you are connecting at 12:40 into the video?
hey. try searching for mavic pro flex cable. and look for one that has only two ends (not like the one im replacing in the video)
How much did you get the broken mavic for?
it's not mine. i repaired it for a friend
where did you buy the ribbon table
cable*
hi. i put the shoplink in the description goo.gl/LyKtE3
If you're a masochist, you may enjoy doing this.
It will never fly again!
Stop talking like that😡😡😡😤😤😤😤 that's really really annoying