DJI Mavic Pro - Full Gimbal Repair - Found this very hard!!

Having never done this before I found this a very tricky repair. Not so much taking it apart but getting the flex cables back in. Took me the best part of an hour to complete the repair with no experience doing this.
All in all it was an enjoyable experience, and replacing two flex cables vs a whole gimble saved me a couple of hundred pounds. I would recommend having a go if you have the same issue.
Flex Cable: amzn.to/3ewcuiN
Video Cable: amzn.to/3KZZSwu
Enjoy the video, please like and sub if its been helpful.

[@surftide]

Thanks for sharing your process. I replaced my gimbal flex and video cables and found it extremely fiddly. Unfortunately when I finally got it all back together the DJI app says ‘camera sensor error’, and I get no movement or video feed from the drone. Not sure if I need to replace the lens or the circuit board the gimbal is attached to. Or maybe the connectors weren’t attached well enough. Any tips would be greatly appreciated. All the best.

[@gangaaan]

Same Problem

[@rickhatesmisleadia7101]

thx for your video. Its good but out of focus

[@WeRepair]

Yea quite a tricky one to film.