M12 Gen 3 IMPACT Driver | "IS IT GOOD" follow-up
Вставка
- Опубліковано 21 лис 2022
- After doing part 1 there seems to be some questions revolving my review. In regards to screws and "fancy editing". This is a much longer uncut comparison. Feel free to jump around to the comparisons listed below...
5:20 - ("Lag Bolts") M12 CP 2.0 vs XC 4.0 vs XC 6.0
7:20 - ("Lag Bolts") M18 CP 2.0 vs HighOut CP 3.0 vs XC 4.0
7:45 - ("Lag Bolts") M12 XC 4.0 vs M18 XC 4.0
8:45 - (3" Screw) M12 XC 4.0 vs M18 XC 4.0
12:10 - (1" Diablo SPEEDemon spade bit) M12 XC 4.0 vs M18 XC 4.0
14:15 - M12 XC 4.0 (1" SPEEDemon) vs M18 XC 4.0 (5/8" SPEEDemon)
To be clear, I do not have any affiliation with Milwaukee or Home Depot as of 11-22-2022 when this video was produced. I do have affiliate links listed below through Amazon which I receive a small commission from at no additional cost to you. Thank you for your support.
-- -- -- -- -- -- -- -- -- -- Personal / Safety -- -- -- -- -- -- -- -- -- --
(These are going first for a reason. I get severe migraines. This combination of super thin glasses arms and gel ear cups are a game changer. And personal preference on most comfortable boots I've ever worn.)
► Safety Glasses: amzn.to/3G4aJoL
► Most Comfortable Boots: amzn.to/3NTvzt6
► Hearing + Music + Comfy: amzn.to/3TnVASh
-- -- -- -- -- -- -- -- -- -- TOOLS / MACHINES -- -- -- -- -- -- -- -- -- --
► Miter Saw: amzn.to/3Tp48bs
► Table Saw: amzn.to/3DRGEWS
► Bandsaw: amzn.to/3EgNF4P
► Planer: amzn.to/3fWAfS6
► Jointer: amzn.to/3Ed4jlT
► Track Saw: amzn.to/3hnp45s
► Router: amzn.to/3UBLDCl
► Drill Impact: amzn.to/3zYOUDh
► 12v Drill Impact: amzn.to/3fSa5A3
► Jigsaw: amzn.to/3DR7SNo
► Brad Nailer: amzn.to/3fMZXZt
► Biscuit Joiner: amzn.to/3FYCOxK
► Sander: amzn.to/3UGQ7qJ
► Beast Sander: amzn.to/3UlELJ7
► Parallel Clamps: amzn.to/3DQBvOI
► Trigger Clamps: amzn.to/3UIUmlQ
-- -- -- -- -- -- -- -- -- -- FINISH -- -- -- -- -- -- -- -- -- --
► Favorite Finish: amzn.to/3TqNwQx
► Lacquer: amzn.to/3taN12F
-- -- -- -- -- -- -- -- -- -- CAMERA / FILMING GEAR -- -- -- -- -- -- -- -- -- --
► Camera: amzn.to/3NPDEPb
► Lens: amzn.to/3zZT5Pe
► Microphone: amzn.to/3NPDUO9
► Key Light: amzn.to/3EiegOQ
-- -- -- -- -- -- -- -- -- -- MUSIC -- -- -- -- -- -- -- -- -- --
I use Artlist for my background music.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
Most of the links in this description are affiliate links and I get a small kick back for them at no additional cost to you. Thanks for your support!
I think he is trying to show how far 12v has come. ( I am sure 18v has came just as far) So why carry a bigger drill unless you need to do a bigger job?
I don't know why so many people are stuck on the one-battery platform BS! There is really no reason to restrict yourself to one cordless tool manufacturer. The reason is that if you are patient you can get great deals on any brand that includes batteries and chargers and even free batteries and chargers with tool purchases and vice versa. Just like you can get free tools when buying a tool sometimes. Get the tools that best suit your job and don't worry about having different brands.
The M12 tools are no joke, but I think you’ll find a big difference in the gen 4 M18.
Your always going to have someone on here that doesn't agree with your testing I wouldn't worry too much about that, your tests have been good in my opinion good video 👍
😂 You are trying really hard to be polite to the trolls. Personally don't care about second or 2 per fastener . I care about how long the tool lasts.
please use right tool for the job. use drill to drill... so it dont waste the energy hammering those anvil.... use impact driver for screwing or the job that the drill cannot.
Don’t worry about the people crying in the comments. You made this video without expecting money or anything else in return. Some people don’t understand this, they expect perfection everywhere but themselves. Great video brother!
M12 fuel line is beast. I'm a diesel mechanic and my m12 stubby 3/8 I'd my bread and bugger tool.
The M12 3rd Gen is really good and compact however it’s got a couple flaws in my opinion. One of them being the screw mode it’s acts like a low gear impact which is no BUENO if working on delicate equipment. Flaw number two being the chuck it seems to not fully release the bits . I bought two sets and both have the same issues . I’m returning both and sticking to my old second gen 🤷🏻♂️.
The M 18 GEN four is considerably more powerful than the M 12 that being said the M 12 definitely Punches above it’s weight class I have both of them. And I agree 100% buy 18 before 12 for all the obvious reasons you pointed out you’re going to get much more range from an 18 V platform.
I do a lot of building maintenance & renovations for property companies.
Got the M12 Gen 3 and I’m running the new 2.5 AH HO batteries and it’s a force to be reckoned with, I’d put it against any 18v platform out there confidently.
Thanks for the testing
Great video man.
So funny you put that Bosch brushed in there. I am upgrading from that line to the m12 fuel. I did really like the Bosch just for size and ergos. Not a powerful beast but was handy and reliable.
I just bought the m12 as my only drills, only because Home Depot is running the special where you get the 5.0 high output battery for free. Returned it and got the kit (impact/drill driver and 2 batteries and charger) for a little over $150
Great video
I didn't know the high output M18 batteries don't improve the old non-fuel tools. That's kind of too bad. Great video!
I love my m12 gen 3
Personally most of my tools are dewalt. But when it come to the m12 tools are great because they make the die grinders I use both they are awesome for what I use them for.