Testing the CHEAPEST Tools from Wish.com
Вставка
- Опубліковано 23 вер 2024
- Thanks to Factor75 for sponsoring today's video. Use code DONUT120 to get $120 off Factor at bit.ly/3PYCP7m
HERE IN MY GARAGE…
Curious what we use in the shop on a daily basis? Check it out below. And if you purchase these tools from these links, you’re helping support Donut. We appreciate it!
Milwaukee Electric Tools 2550-20 M12 Rivet Tool (Bare Tool) www.amazon.com...
Milwaukee - 48-22-0125G - 25 ft. Magnetic Tape Measure - 2-Pack
www.amazon.com...
Milwaukee 48-59-1880 M18 REDLITHIUM HIGH OUTPUT XC 8 Ah Lithium-Ion Battery and M18 /M12 Charger Kit
www.amazon.com...
Milwaukee Angle Grinding 2781-22 M18 Fuel 4-1/2"/5" Slide, Kit
www.amazon.com...
Milwaukee 2735-20 18V Li-Ion Flashlight
www.amazon.com...
Milwaukee 2557-20 M12 Fuel 3/8" Ratchet
www.amazon.com...
Milwaukee 48-11-1880 M18 REDLITHIUM HIGH OUTPUT 18v 8.0 Ah Lithium-Ion Battery Pack
www.amazon.com...
Milwaukee 2125-21XC M12 LED Underhood Light Kit
www.amazon.com...
Milwaukee M18 FUEL 3/8" Compact Impact Wrench with Friction Ring
www.amazon.com...
Adenna Dark Light 9 mil Nitrile Powder Free Exam Gloves (Black), Large - Box of 100 (DLG676)
www.amazon.com...
Scott Shop Towels Original (75143), Blue, 55 Sheets / Standard Roll, 30 Rolls / Case (10 Bundles of 3 Rolls), 1,650 Towels / Case
www.amazon.com...
Zep Cherry Bomb Industrial Pumice Hand Cleaner - 48 Ounce (Case of 4) ZUCBHC48CA
www.amazon.com...
AIDEA Microfiber Cleaning Cloths-100PK
www.amazon.com...
Barrow 52 in. Brown Large Rectangle Wood Coffee Table with Lift Top
homedepot.sjv....
Barrow 52 in. Brown Large Rectangle Wood Coffee Table with Lift Top
homedepot.sjv....
New to the Channel?
►Watch this: • POPULAR DONUT VIDEOS
We upload almost every day, subscribe so you don't miss out!
►Subscribe here: bit.ly/1JQ3qvO
Click here for more info on joining the Donut Underground!
► / @donut
Shop Donut Merch:
►www.donut.media/
Donut Media is at the center of digital media for the next generation of automotive and motorsports enthusiasts. We are drivers, drifters, and car enthusiasts who love to tell stories.
The $10 impact, and 192 pc tool kit would be perfect for a kids present. Inexpensive but useful enough that a kid could learn, and you wouldn't be out much if something broke.
No, your kid would start to disassemble things at home. Very unlikely a kid would preak a socket set or screwdriver.
An impact, maybe by dropping it.
@@Cheepchipsable Maybe if your child is under the age of 5.
That idea would have terrified my parents. I took things apart all the time. No kitchen appliance was safe.
“Dale I said no power tools” haha
I just give my son my old tools I don't use anymore
About 6 years ago I bought an air powered die grinder off wish for $15usd, it came with a dozen different bits, different size chucks etc. I thought it'd be worth a laugh but no, it's worked flawlessly up until this very day! It gets used multiple times a week and I'm still amazed at how damn good it is.
Wish is full of crap but once in awhile, that crap is accidentally great 😅
I have bought a few things from wish for my kayaks, and camping. They work well. Bought a cheap skeg for my swifty to help it track, and it works. I also bought some nice metal guy line tensioners my tent, and they work great.
I bought a "250GB" USB stick for just a couple bucks. It had a fake memory chip and it's actual size was 32GB, but it's the biggest and fastest stick I've owned and was actually great value
everything is made in China even the expensive tools. so i would say cheap tools will work fine. i dont know what donut media is smoking...
@@allio3459 Yeah, that jack seemed good for people that might have some mobility issues or older people.
Even to use those cans of tyre sealer to.
I've seen a lug nut remover that you put over the wheels, but you could carry an impact gun, though those repair kits in a can are quite good and easy to use.
Cheap tools are best when you just want to use something once or twice and will probably not use it again in 5 years.
@@Cheepchipsable exactly. If cheap tools will last for 5 years or more with good care and under $50… that’s a good fucking deal.
For the orbital sander, I suspect it IS a Bosch sander. The factory just "accidentally" made an extra batch of them, without the branding, and sold them to a company that slapped their own brand on them, and threw them at Wish.
Sweet deal if so.
That is 100% what happened. They do this all the time.
it IS a Bosch sander 😉 and the funniest thing is that they are made at Bosch😅
Might be factory defects, quality control failures they strip the brands from as well
@@paulwalked5810 I think more likely a "third shift" product.
Ever since I watched the torque wrench test, I’m always scared for the eyeballs of the Donut Staff when I see a new testing video
All about them safety squintz fam
Ha
They really need some better safety precautions for these tests
They need OSHA in their lives
@@zhershey65 facts
I was gifted the 198pcs tool kit from one of my friends after I moved away from home to join the navy, and I have to say, while some of the pieces' handles have fallen off and I have to shove them back on, it has been great to have. I've used it to replace radios, door locks, window motors, and wheels along with other small maintenance around the house. It may feel cheap, but I've put a beating on those and they've lasted over 4 years now
I love how the first they do after opening it is trying to break shit hahah
Yeah you can't go too far wrong with cheap hand tools and you don't feel anywhere near as bad if you lose them
For many people, it's better to have a lot of specific tools than to have a few high quality tools! My 10 buck ratchet screwdriver broke within 1 ikea bed, but now I have 30-some screwdriver bits that are surprisingly good if you're not driving anything into walls
Well for the price that's DAMN good
For a set of house tools it's fine. Most folks have a claw hammer and a couple screwdrivers and that's it. That's all in a box in the closet with a broom handle as the tool box handle.
For plasma cutters, if you disconnect the air while the machine is on, some machines make you restart it. And often times, if the consumables on the torch head aren't tight enough, the machine will also not work until you tighten them and restart the machine.
Yeah it sucks they really didn't make much of an effort to see if it really worked.
Didn't even skim the destructions
Then they wouldn't be able to say it sucked the jack worked fine and they threw it in the trash.
I would not trust that jack 😅😂
@jamesl14jamesl14 it's for changing a flat not a transmission
Zach saying "Jobe!" while shooting stuff in the trash is a great example of why I love this guy 😅
Kinda disrespectful to a legend
@@packersgoat4749 No its not. What a silly thing to say.
@@packersgoat4749 literally how
@@packersgoat4749 its respecting his talent, which is why people say Kobe when dunking stuff?
Why say Jobe instead of Kobe
The wobble on that impact is a design feature, if you read all the literature you’d see Wish incorporated a u joint to help access all those tough to reach nuts and bolts
They really thought about the consumer on this one!!!
@@rickrolled3666 Finally!!!
It also would be plenty good for taking wheels off once you break them loose. A lot of people use breaker bars and lug wrenches. For the price I could imagine using it only for that. I wouldn't use it to take things loose for longevity.
@@rickrolled3666 Trash
@Caroline Hot 💋🌹 Trash bot
Shame you guys didn't open the plasma cutter to see what was inside. Considering this came from Wish I wouldn't be surprised if the only thing in the box was a case-fan, some wires for the light in the switch and a brick that was glued on the bottom to make it feel heavy. 😅
Also, you have to check the shipping costs as that's where these companies make their money. Like they charge you $30 plus $90 in shipping while they pay next to nothing to ship via bulk container (which is why it usually takes 2-3 months for stuff to arrive).
A brick of what tho?
@@adrianishtar0 Unfortunately just a regular brick most likely.
@@adrianishtar0 or coke… who’s to say, really
China can ship products for nearly free due to the United postal union act hence how wish can offer free shipping on every product.
Yeah it was a bit annoying they didnt say the shipping because thats part of the cost, and just like you said they put a super low price but then make the shipping something insane to equal the real price.
Build quality/durability is one thing when it comes to cheaper tools, but safety is the biggest issue.
Nah
Shutup nerd
Zzzz
Well, yeah. If you can't afford expensive tools you likely can't afford the lawyer for when you cheap tool maims you.
Never had a problem with my harbor freight tools, use the jack every day, but i wouldnt trust tools that are cheaper than the materials should have been
I could see the $10 impact being decent for like a RC car/boat hobby, also realllly wish they took the case off the plasma cutter to see if it was faulty or just a full blown scam.
Perhaps, feels a bit big for that. I think it would be good for light-duty work, not the high-torque stuff you'd want a good impact for, but as a convenient tool to use instead of a manual socket.
I have a similar (supposedly) plasma cutter (is blue rather than red, but looks similar and has "CUT 50" written on it) and it does work. Not all that powerful, but that's because if I turn the power up too high it pops the breaker, not it's fault. With a higher-current or 220 outlet it would probably be awesome. Really wish they'd given this stuff more a chance, I feel like they were prejudiced by the price. Maybe they should have tested the stuff before hearing the price, not after. They should change the order of this, instead of look at, guess price, hear price, test, decide to keep or trash, they should look at, test (thoroughly with real expectations), guess price, hear price, decide if is worth that price or not.
@@quillmaurer6563 Maybe even test it against the brand name one!!
What on earth would you be using an impact for on an RC car or boat?
@@jdrevenge 1/5th scale rc cars we use impacts on the wheel nuts and sometimes need one to break loose some of the bolts.
@@darthrevan611 I’d use a 1/4 ratchet lol
My dad got me a tool set like the one in this video (but smaller) when I was a kid and started to get interested in tools and cars. We were renovating our house at the time and I felt so grown up to be able to bring my own toolset out to do the little jobs I could help out with. When he knew I was responsible and wasn’t going to lose or break anything, he let me use the good stuff. I kept the toolset in my closet for years, it was convenient to have to hand for any quick jobs in the house without going out to the garage/truck. They aren’t great, but they have their place at times.
Jerry and Jobe are honestly my favorite duo at Donut. One's a professional mechanic and the other is a mechanical engineer and their combination of science and experience, plus their personalities make them my favorite to watch.
An engineer? And doesnt know that there isn't a drop of hydraulic fluid in that thing. Hydraulic pump???
@@oronq2010 jerrys the engineer
@@oronq2010 1: jobes the mechanic, jerrys the engineer
2: it was a brain fart, he mispoke, he corrected himself.
Yea mine too. Their chemistry is entertaining lol
They don't have personalities.
The $10 impact would be good to use to put wheel nuts back on. It won’t over torque. Then you can go over with torque wrench if you want to.
That's what i was gonna say. At our shop we do just the thing, use the small impact to secure the wheels to the hub somewhat, if you weren't brave enough to do a few quick zips with the full-sized air impact, lower the car then torque 'em. I love using that Makita DTW251z, a quality tool that works like a charm. And then to have that 10$ thing do just that, yea i'd actually buy it. If something's got big torque, i'll break it loose with the breaker bar, and use that cheap piece of shit to do the rest aside from torquing them down. Of course i'm not gonna expect it to last for years, but i'm sure i'll get at least some of my money worth out of that thing. People buy a lot more useless things for even more expensive than 10$.
So , what we need to do is give this to the coconut who changes oil .
I'd find it useful for a lot of things. Not heavy duty stuff I'd use a real impact wrench for, but light-duty stuff you'd use a regular socket for. I'd personally use it a lot. I have a corded impact wrench, which is quite useful but a bit of a hassle to drag the cord out for it, so if only doing light-duty stuff I'll typically stick with a socket set. This could make such work go a lot faster, a convenient but not capable tool.
@@texasslingleadsomtingwong8751 If you see someone actually use an impact just to deal with the filter and the drain plug, you know to look somewhere else. Like plenty of times it's fine to use an impact on plenty of suspension and a few engine parts. But nobody would be dumb enough to use them on spark plugs, drain plugs, internals' or cylinder head's bolts.
@@sirbrokenlegs2074 I've had my fair share of way over tightened oil drain plugs , enough to make me think the guy in the bunker has a five foot cheater or a very quiet impact , lol
The plasma cutter definitely needed more investigation, it would have probably been an easy fix. I have the exact same one only I paid 120 for it and it cuts great
I was just saying the same thing and then looked at the comments and seen your comment. They should investigate. They can probably do a whole episode just on that plasma cutter.
I bet styropyro can make a 1 MW pulse laser with it.
I need to know what was wrong with it. Like, was it just a valve needed opened somewhere? Need. More.
@@CDCI3 Same here, my mind is just stuck there now why it didnt worked? i would have spend hours on it before I come to a conclusion that its dead. Should have tweaked it a lil more for our satisfaction lol
@@MW-zy4no Right? They were seeing 0 PSI? In my mind, I think it has to be one of two things:
1. The regulator and the gauge are separated (by a valve?) and there is pressure built up somewhere.
2. There's a massive leak before the gauge.
Jeremiah totally dug that electric jack out of the trash after filming was wrapped lol
The air diaphragm is likely screwed in place for shipping like my soldering station's heat gun, look at the bottom for the bolt that needs removed.
Exactly. Didn't read the instructions. It'd be pretty hard to make a bad plasma cutter, there's not that much to them.
I would never buy yhis thing. But if i somehow receved it for free I would take the time to see if I could get it working...
Yeah obviously the airline is plugged somewhere so it's probably literally a 20 second fix like pulling a stopper or a plug or a screw out
That was probably the missing plug for the valve, you take it out from one spot and put it there.
Yeah it is really annoying that they made no attempt to try and get it to work. Almost like they wanted it to fail.
I'd love to see them make an entire mechanic starter kit using exclusively wish tools. Either set a budget or have a competition to see who can do it cheapest.
Like impacts, hand tools, sockets, organizers, tool box, everything. Close to everything that a C or B level tech would need to get through the week. That'd be fun to see who can get the most functional, and diverse tool collection this way.
Good idea!!
The one whose tools function for the lowest price get the point. So tools that are so cheap that they don’t work would lose you the round.
Kind of like price is right but for cheap tools.
@@megladon6 Maybe do it like a classic Top Gear Challenge? For $1500 or so, someone buys their first car and has to use the change leftover from the purchase price for tools to learn routine maintenance.
This is a fantastic idea. They already stole the magnet "best of" board from Top Gear. Why not the challenge structure too 🤣🤷♂️
No, but really. This sounds like a great idea and would watch HOURS of them doing stuff like that from them.
The “Jobe” swish threw me so much I genuinely laughed way more than I should! You two just work together so well!
Big round of applause for Jimmy everyone!
@@rickrolled3666 fuckin' robot account - why aren't you banned yet?
Dude needs to tie his shoes! OSHA is coming for you DONUT! 😮🤣
Jimmy....your shoes, bro....ugh...
The $10 impact wrench is listed now for $91.
Of course it is they had to raise the price after Donut media gave them this glowing review!! 😂😂😂
Lmao great buy still clearly 😂
the tool kit is 40$ now as well
Donut tax
@brent randall What does biden have to do with this....i swear he's gonna live rent free in all his haters heads. You say his name like it has relevance..😂
Love when you guys pump out content keep up the work!
The "Jobe" when shooting the battery in the trash really caught me off guard lol
but it was gold
14:54 $30 plasma cutter should have taken the cover off to see what you got for $30. Was it just a box with dials and switches?
Hey, for a cheap sander that was pretty alright! -Edgar
Okee dokee
I wouldn't be surprised if it was an unbranded Bosch. Like how companies will sell models to more well known companies and they'll just slap a name on it.
@@shadypalmtree2989 It's very common in grocery retail. Having worked in grocery for over a decade, it's become pretty easy to tell which products are rebranded brand names. For example; most grocery chain's store/private brand 24 pack drinking water is actually Deer Park water. It comes from the same exact bottling plants, on the same exact bottling lines, using the exact same water. The line doesn't even stop to change labels. Each bottling run let's say a thousand Deer Park branded bottles are filled, directly followed by a thousand Kroger branded bottles, then Walmart etc etc.
@@shadypalmtree2989 I doubt it is a Bosch. Don't be fooled by the color. Tack Life is owned by Aukey. Tack Life/Aukey used to sell these on Amazon, until they got caught using a paid reviewer service to place fake positive reviews for their Tack Life products. At the time they were selling them on Amazon, you could find about a half a dozen of the identical same sander being marketed under different "brand names", each with a different color. This is the same identical sander being sold at Harborfreight under their Bauer name, which are Red. If anything, these are just re-badged Harbor Freight tools.
I would love to see donut make a crossover episode between the wish tools series and the car giveaway series where the contestants would need to fix the cars with cheap and terrible tools...
High/Low Tools Edition
@Deto Qcney just make them wear weld PPE
I have the electric jack and for those of us with bad backs its a life saver. I've never regretted buying it and it fits in the trunk of my grand prix just fine
You can get a nice hydraulic one with a long handle that will last forever for 150$ ish bucks at harbor freight...
@@WHATDATTOOLDO Long handle jack isn't so convenient for lugging around in the trunk
I like how it looks like you're spooning at 6:36. Very sweet.
Plus Jeremiah is dreamy 😂😂
They're both dreamy. Uh oh, I sense a lemony fanfiction developing somewhere. 😬
@@ItsNuxFury yeah they are, but in that case Jeremiah was the little spoon. Lol
I've had that exact electric scissor jack (thought from Amazon) for over a year now and I love it actually, yeah it is bulky it takes up less space then a regular floor jack if you travel, just have to remember to grease the threaded shaft from time to time!
Seems very useful for older people.
Yeah, I thought this was a miss - your car probably already has a manual scissor jack or something near a spare tire (or space for a spare) so it wouldn’t take up much room at all, maybe just get rid of the hard case.
I would totally take that jack. You guys at donut can send it to me!!!
I have two! Great for lifting a car in a tight garage where you can’t get leverage on a longer jack bar. A bit slow, but faster than a traditional manual jack of the same type. Love them!
It takes up as much space as the jack kit you get with the car. Nothing worse than twisting up a manual scissor jack on rough asphalt
13:26 I HAD A HEART ATTACK
Kinda feel bad saying I have that yellow electric jack, but it works great and super convenient especially when you get a flat in the city. Fits with my tire kit great in my trunk. Keep it with me all the time. Love it. Recommend it.
@koiun dwrru I've used it a hard dozen times. It's been very consistent and handles my car just fine.
I thought it was weird that they trashed it after proving it works much better than they expected.
It's faster than a regular jack
I wouldn't trust it enough to roll under a car unless I braced it with the harbor freight jack stands I got from a pawn shop but I could see it being pretty handy
@@charlestimmons604 you wouldn't need to get under the car to change a tire, and if your doing car repairs you always should use jack stands and tire blocks.
I think they failed to realize that wish sellers don’t actually sell those items that low. They make the price low but then they add a lot in shipping, so while the tool set was $10, they most likely charged a lot more in shipping, making the actual price a lot more.
Exactly! Shipping on the wrench is $90 and shipping on the plasma cutter is over $200
Yep. Or its for a sold out colour, toy version, some size of item that noone would ever use, or just an accessory. You need to click buy and add to your cart to actually see what you would get or what you would pay.
Same goes for eBay and aliexpress usually
@@jbarzee0001 That impact wrench for a total of $100 totally changes the proposition. I _wish_ they had mentioned the total price.
The shipping issue is new. It goes up and down daily.
@@noobsimdriver it is not a new issue. Ordering from China has always been that way. It started on eBay over 20 years ago because you only paid fees based on sales prices now including shipping.
My experience with these sorts of products is that they DO work, but they have almost no durability. Need it once? You're fine. Need it a hundred times? Maybe get your tools from somewhere else.
EDIT: Also, sometimes the factories in China produce name brand tools, then produce the *exact same tool* for another brand. All they do is change the stencil and box. That's probably why that sander they used was comparable to the Bosch sander they showed - it IS the Bosch sander, just with a different name.
Mad respect to the editors, really make the humor work!
The impact wrench is indeed $10, but they left out the fact that the “shipping” is $90.
Yep. Or you could pay more for cheaper shipping. The same item at 90 dollars would only charge 11 dollars shipping. Lol, but sadly true
Or that it didn't include batteries.
Nope
I would have loved to see the plasma cutter working
You guys should have included shipping in the price.
Sometimes they charge 5€ shipping, sometimes 50€ shipping.
Actual shipping from china is around 50 cents, depending on the weight(for the plasma cutter maybe USD5). They get cheaper rates because they are still considered a developing country.
Prices should ALWAYS include shipping! You can buy running shoes for 15$ and pay another 10$ for shipping. But you also can buy the shoes for 20$ including shipping. One of the many reasons to hate Wish.
Wish prices are totally bull crap ... All those items are averaging $35 shipping to Canada. lol
Yeah, and all that slave labor from prisoners and 5-year olds doesn't hurt the price point, either. Screw all of it. At least you can take stuff back to Harbor Freight almost indefinitely when it breaks and it probably comes from the same factories.
@@maxheadroom22and26 No, i don't think they should.
Usually a site doesn't know where you live, so they can't display the cost of shipping to you.
But it should say "excluding shipping", or something like that.
I was yelling at the TV the whole time. Shipping costs, (especially for the super low priced items) make up for the "bargain" prices.
$10 "impact" I'd gladly break it loose by hand and zip everything out. I got all Dewalt stuff now but back when $250 was alot of money to me I would of loved that thing
Seems like it's best function. Still for $10 what would you expect.
Seems like what it is, just a stronger ratchet
Agree - not suitable for "heavy duty" stuff like a good impact, but a very convenient light-duty tool. Not a replacement for your Milwaukee impact, but - at times - a faster alternative to a ratchet. I'd totally use that if they gave it to me, I have a corded impact I use sometimes but the cord is too much bother in some cases so I just use a ratchet - this thing would be great from a convenience perspective.
I'd use the $10 impact to take bolts out when disassembling something. I have a dewalt impact drill that I use currently. I'm sure that would work in it's place. What does it weigh?
No. No it wouldn’t. It would break remember u pay for what u get
This has definitely become my favourite show from donut the chemistry is on point and it's genuinely unpredictable every episode, and to me that's what makes the best episodes... Keep up the awesome work.
open the plasma cutter case up, see if it's just a fan and weights or if they actually tried making something that works.
3:23 The battery gotta be at 25% now 😂😂
I actually have that same jack, got it from Amazon though. It's fantastic to take on car trips for emergencies. It beats bringing the manual pump or using the factory installed jack. We actually used it on our aluminum car trailer and it did the job well. So I would recommend it honestly. But, since you threw it away, I'll gladly recycle that for ya.
Exactly, they acting like they really enjoy using the og jack over pressing a button
I figure it wouldn't make sense to carry with you due to bulk/weight, but would be a nice thing in the shop.
@@quillmaurer6563 the factory jack takes up almost as much space. I bet you it will fit where that one goes.
I bought a discount tire inflator once. The second I turned it on it started smoking.
Well. You got a cool ass smoke machine then for your car.
Ive got one of those that is so fire! Lol uhh yeah mine started smoking right away also even tho they aint same brand probably but yeah cheap air inflator = smoke!
Yup, I had the electric jack years ago. I used it to as a outboard motor lift, on my boat.
That shot at 6:38 🤣🤣🤣
Man I love y’all. Donut is legit like a second family to me. I know we could meet and get along immediately
My man’s said “Jobe-y”. He’s a true legend
I think the Plasma Cutter deserves a second chance!
Same - I'd totally watch a video of them trying to get it working.
I'd love to see what's inside the case. I think it was just a factory reject. Those things are nigh on impossible to fix when they croak. They weren't designed with repair in mind.
There are internal air adjustments. I had the cut50 and upgraded to the 220V version. And have been using it for about 7 yrs. They are a little temperamental, but with a little practice (and patience), they've cut everything I've thrown at them.
"It's on, it's got a fan. This thing's gunna cut." 😂
This testing things from different sources is by far one of my best donut media series ever . Love them trying and reviewing these stuffs for our knowledge and entertainment.
Problem with the "reviews" is that they are just showing their bias and lack of imagination. Most of the stuff worked fine, but sure you wouldn't use it every day in a workshop...which is why it was so cheap.
I think you send the plasma cutter to AVE for an in-depth tear down ,great video
There's a guy here with a channel called DiodeGoneWild and he knows his electronics. He'd either get it working or figure out exactly why it can't work. But he's in Czechoslovakia. So shipping it to him may be hard. Mostly he just reviews crappy USB chargers though.
I was surprised by the electric scissor jack. I wouldn't trust it to lift the entire rear end of my Escalade but to lift one wheel at a time....I think yes. Also when doing oil changes just to get a little extra ground clearance to access the oil pan and filter. I think I may look into one....but a better quality one. Honestly I didn't even know these existed. I guess I'm old school....I roll out the hydraulic floor jack for everything. LOL.
The jack would be good for someone older or disabled. Combined with an impact and some people would be able to change a tire when they normally couldn't.
But if they’re old or disabled how they got change the tire after its up lol
@@chickenpotpie79 impact or torque multiplier to do the lug nuts, lots of elderly or disabled can move a wheel, but don't have the hand strength to run a jack or lug wrench.
I turned on a drill from wish. It started a time loop that I can’t get out. I’ve been living this same day over and over again for 15 years now.
hmm
I can vouch for tack-life actually making some pretty decent power tools.
The $10 impact wrench could be the basis of a ton of d.i.y. projects tho :)
Like a electric scissor jack 😉
Or a tool for kids
"we got the biggest toll in the shop, Jeremiah!"
Jeremiah, waves and smiles whilst the camera is on him, then his smile contort slightly before the shot ends, rage un-containable. Plotting his revenge.
I got jumpscared with the tongue plasma thing... hahahaha I'm so dumb.
Honestly I'm tempted to buy that orbital sander, on very very rare occasions I think, hmm I wish I had an orbital for this instead of my palm sander so this might fit the bill for me
You better off buying a used one on Fb marketplace. I had a 20 bucks black and decker and it lasts forever.
My only issue with this kind of series is that shipping cost isn't included.
Since it doesn't matter if something is 1$ , is shipping costs 100$.
Shipping is complicated because sometimes they'll offer free shipping and sometimes the shipping costs are negligible with a large enough order
@@Outwardpd no it's not the issue.
Here the seller lie on the price by making the object 10$ and the shipping 200$.
The plasma cutter for example is clearly not worth just 30$, but it's just a trick used by seller to get a better ranking.
Usually on wish the shipping is actually a good price, usually less than 5$
@@loganries7066 The shipping on the impact was $90
7:26 I love how he carefully puts the scissor jack inside the trash can 😂😂😂😂😂😂 he probably wants a refund.
I bought one of the electric jacks from Harbor Freight after the Ford one bent changing a tire on crap ground. It actually worked for what I bought it for, only to change a tire on roadside issue. I think it was $50.
the thing is, we have a lot of burner tools like theses at work (crap tools u dont care to trash) stuff like undertrays ect the impact would be good as u wont de-thread them and the junk tool box would be great to have when u need to hammer stuff, i may actual buy that impact would be usefull when i dont want to break things
5:34 Some Lil Jon sounding Outrage
This is becoming one of my favorite series you guys have done.
Thanks Jimmy for your hard work and dedication to the Donut team!
I have a similar impact wrench, compatible with Makita battery. with right battery, it can easily break ~120Nm wheel nuts
Was actually hoping the plasma cutter would work love these types of videos keep up the good work lads
yeah i was sad they didn't try to trouble shoot it. it powered on maybe the plug for the regulator was on the end of the hose or something... i dunno. I mean the sander they didn't even plug in at first.
I have a supposedly similar plasma cutter (looks similar, says "Cut 50," but is blue) that works reasonably well. Can't do a lot because if I turn up the power much it pops the breaker, but that's not it's fault, if I had a higher-current or 220 outlet I bet it would do quite well. They gave up on it way too quickly, should have troubleshot it a bit. They were ready to declare it junk as soon as they heard the price, didn't give it a fair chance.
Break open the plasma cutter to see what's up. I'm just curious now. I remember Mighty Car Mods bought a "chip" and found it the chip had no data to actually do anything but light the little LED light to "signal" it was on. It was just a simple closed loop circuit 😄.
TNice tutorials tutorial was so easy to understand. Thank you so much!
Glad you uploaded today. The days when donut is silent is always a bummer 😆
I've bought a few different Tacklife items off of Amazon and have liked them all. Had some over 2 years without a dip in performance. Good product at a very good price.
6:20
Too funny.
Never saw you guys before but I like the show. Thank you
I'd keep that electric scissor jack, perfect for tire changes
i agree. i feel like they were harsh on the jack for no reason. trunk space and weight isn't really an issue if you're driving a normal car, especially for something that size. i actually want one lol
The tack life stuff isn't too bad. When I went to aviation maintenance school, several of my classmates had tack life welding helmets, and they worked great and were surprisingly tough
These two are my favorite from the channel
They left out all of the shipping costs. Shipping is often more than the item itself! Pisses me off how they misrepresent wish as cheap, when it absolutely is not.
Buying US made products from outside of the US is simply uneconomical -
with shipping costs far exceeding the cost of the product and often four or
more times higher.
The CCP subsidizes shipping out of CHINA and have contracts with a number
of Airlines - FedEX- DHL and SINGAPORE AIRLINES ---
Yet not one US president is smart enough or interested enough to promote US made
products and provide subsidized shipping - instead it spends money on warfare and
paying for mercenaries and home-grown terrorists to cause trouble in other countries.
While US jobs are disappearing - minimum wage is much lower than in Australia -
homelessness is increasing - tax payer funded heath-care is non-existent and the
health system is pathetic- The US is going down the toilette fast and is managed
by a bunch of incompetent clowns that have no idea what is happening in the country.
To earn any money the uniformed dogs rob people by the roadside.
The US is in desperate need of therapy.
I *totally* would take that impact wrench. Would do great in an emergency.
I couldn’t find one for 10$ feel like they faked the prices or something because I found none of those items, realistically they’re great for thag price
Annoyed me that they called in a impact driver and not a impact wrench
That $10 tool set is another reason why it's INEXCUSABLE for a household to not have a basic tool kit. I know too many people who call expert help every time a smallest stupid thing comes up that only requires a simple tool and a google search at best to sort out.
I'll take the plasma cutter. Might not take much to get it to work. Would be a fun project to me.
Seems like you are taking a real gamble with WISH and people should just pass. Thanks for showing us what’s up!
its encouraged me to go there to look fo accidental quality bargains!
How about some wish amplifier tests and reviews?
Guys please make more of these videos :) with love from Lithuania 🇱🇹
Tacklife is actually good stuff for the price imho. ain't so cheap in general. Got a 40$ torque wrench from those people, works fairly well and is accurate enough
Tacklife is a budget price mid quality brand in many Eastern countries. It's really good and the prices are great
Chinese products have gotten much better these days, even the really cheap stuff.
While I find that Project Farm has a more scientific approach to testing and data collecting, you guys have a more fun approach!
I do like both canels, btw.
Check out AVE or Boltr on YT You never see the guy and he tests the schit out of stuff. & he dismantles it too. Canadian humor. New, and he takes it apart.
“Well, You wanted more air time, this is what you gotta do!” 😂
MCM fans be like "IN THE BIN!"
Why you gotta do Jeremiah dirty like that? He's not a tool, he's a treasure
How many visual and sound effects do you want to use?
Donut media: Yes
I bought that orbital sander from Amazon a couple of years back. Cost me much more though...wish I'd gone to Wish! Either way, it was still cheap and I've used it for hours continuously on many different jobs.
It's also not 10$ on wish... They got played by seller displaying a lower price by exploding shipping cost.
That’s funny, the 198 piece tool set I was totally thinking of leaving at the girlfriend’s mothers
house. Totally worth it
"You want more air time this is what you gotta do"😂😂😂
As a handy but non-professional guy the most useful advice I got when it came to tools was: start with the cheap stuff, and when it breaks replace it with something better. I'm not a carpenter or contractor using this gear daily. Every year I might do a handful of jobs that need specialized electric or air tools - unless I'm using them every day, the cheap stuff is still going to last me for years even if they wear out way sooner than the professional grade. Anything I use enough to wear out quickly, I replace it with something mid or upper grade. The things they "trashed" here would still all be worth holding on to if you didn't have anything better, and using until they failed.
I partially disagree.
I guess it all depends on how much you would plan on using it, but even the average homeowner would probably use something enough to make it worthwhile spending a bit more on something that will last all your life, instead of just a few years.
You don’t even need to get the super expensive shit, but why pay 10 bucks for an impact that might last a few projects when you can pay 80 bucks for something that will actually last.
Buying something you anticipate will break is stupid and wasteful. In both money and now you’re contributing to more junk being thrown into landfills
Since the sander looks identical to the Bosch (and wasn't junk), my guess is that it was one that Bosch declined for whatever reason, so they just sold them unbranded
It doesn't even spin the same way the Bosch does.
When he said "smells cheap" I knew exactly what it smells like xD
Biggest tool in the shop lmao
Is that an inner joke that Jeremiah loves making mom jokes
I’ve bought some cheap hand tools off wish for my garage and honestly they haven’t done me wrong yet. The best ones I bought was a trim removal kit that came with all kinds of push pin remover tools for $3 on Wish and it was so worth it
Petty hard to mess up those kinds of simple tools.
It's complex electronic stuff I probably wouldn't buy.
Casey, this video is how it was at the begining. This is what i like to see. Yes the tracks did good also. But the old air down way is the best. Keep the vidoes coming.
I have bought a few tack life stuff on Amazon. They have been good. Much better than expected
These 2 are such a good duo
I understand that they are shitty tools from the start,and its a good thing that you are testing them.
BUT a absolutely hate all this earth littering,wasting resources,tossing coulture thing,I repair all the time everything others throw away even if it may not worth my time.
It would really be refreshing to see this hole shit change and regain faith in humanity!
You read my mind..
Technically…wouldnt Jobe be the biggest tool (in a good way) …being a mechanic? Haha.