How To: Easily Fix Kick Starter Gear on 50cc Scooter!
Вставка
- Опубліковано 26 вер 2018
- Is the Kick Starter Gear or pinion gear on your scooter, or any other kickstart machine stuck? This is the video for you.
I used Kine Master for editing.
Thank you so much! - Навчання та стиль
Well what a great video I now have the confidence to do this on my own scooter you really saved my butt thanks a million
No problem man
Well done fella I just got the same problem. but I will strip it out tomorrow. great clear explanation. Thanks.
You the man bro! I’ll have more questions later thanks
No problem
Wow! Very informative
This video is very helpful. I have a Kymco People 150 with a stickie kickstart.
That was actually helpfulllllll thanks my dude
No problem man
Thanks buddy
Cool, I hit mine with the pb blaster and it’s working on a charm with my ‘07 LX50. I think that little kick start gear is loose for me or sliding out because I hear a bell/singing sound when I’m riding; like the gear is scraping against the flywheel or something
The bell sound is likely from the bendix
Hey dude I have the same scooter having a hell of a time finding a carb for it, any suggestion?
Great info, ☆☆☆☆☆☆☆☆☆☆☆☆
I'm sorry but you need to work on the camera angles. Every time you're explaining where something goes the camera isn't looking at it.
what’s the hose for that’s attached to the engine for
i need help with my moped the kickstart used to go down but my transmission belt broke into peices ever since that happened i kick it down and it struggles to go down but it goes perfectly up the electric start don’t work my last hope is kickstart please can someone help out
Hate bugging about my kickstart being jammed up. I've removed cover, cleaned, lubed and it still will not go down. I've put it on 5 or 6 times, same results. When off scooter the unit works smoothly. Either I'm doing something wrong or motor is seized or some gear bearing is jacked. My electric starter doesn't work.. So I can crank that way. A guy told me I should use channel locks to try turning crankshaft... Does that sound correct ? Any suggestions appreciated. I to dang old to keep riding the MTN BIKE. Thanks
That will tell you if the motor is seized up. If you turn the crank with channel locks.
My aprila area51 doesn't have the clip on the pinion gear dose tat matter
So I have most of the same parts and got everything reinstalled on my Kmyco zx50 (2003) everytime I use the Kickstarter the part to the left of the moon gear (lol) fits in nicely but moves up and out of the housing and I don't know why. Suggestions?
Did you fix it?
Does it work on a 150cc
mine kicks the other way i used jb weld. any help please
What is that black hose going to the front of the whole case? My Tao tao atm 50 a1 has the port there, but I can't seem to find the hose that should go into it. Also, why is there a seal or gasket when there are so many open holes that let air in anyways?
That hose is just a ventilation thing for the case. Also I belive it holds a vacuum, I know if you pinch that hose, it will start up easier. Not sure about that gasket tbh. Prolly for dirt/debris.
@@jaredzanelli7867 Oh okay, thanks for the reply. So if I can't find the hose that going into that port, do you think I could safely cap it off if I can find the right size rubber cap?
@@remyllebeau77 well, it Is a crankcase breather, it shouldn't be capped off. That I believe goes to the carburetor if I'm not mistaken. I would replace instead of capping off. Do a little research on the side. Look at this link. scootdawg.proboards.com/thread/51628/crankcase-valve-cover-vent-hose
The gasket is mainly to prevent damaging tge cvt cover and the mating surface, gasket provides some cushion so it squishes and not the aluminum surfaces. It also helps keep a negligible amount of dirt out.
@@cemtkeenan2750 Okay thanks.
What size bolt holds the kick start lever arm on?
M8x25mm
So like, what if my kickstart did that, but the moped actually turned on, and everything started grinding
Does it work with 5-56?
I have a 2015 genuine roughouse r50. And i cant get that crankshaft cover off? Took all the bolts out but it seems frozen. Is there a trick to get it off? I need it off to fix my kick starter. Seems like a spring problem but dont know till i get that damn cover off. Please help
I would make sure you have all hoses and bolts off again. Then gently pry with screwdriver or something. The gasket ca just be stuck. Good luck
I took all the bolts off and it didn’t come off help
I kick-started mine and it got loose and just slides if I just tighten the bolt will it fix it I need to know asap because I have to be to work tommorow and can't walk it's to far any tips would be great
Yeah your gear is probably stripped. If tightening it more and more fails. Try to put soemthing around the gear so it won't strip anymore. Or replace gear and kickstart
Same for 150cc ?
Holy shit that's a Kymco top boy man ... Mine is kicking back at me after I outan aftermarket CDI why or how can I fix it
When you took it off did oil come out?
No oil
What does it mean when it’s loose the kick starter ? Mines is just dangling now and can’t start my bike
Threads are stripped order a replacement kit, $60 online
Please help me my honda kick not working.
Bro mine makes a weird noise and I don't know how to take it off can I help me plz
In the video it shows you
Good one, but you never showed it clearly how you loosed it and how you coupled it back.
You never showed us the bike starting on the kick start if ya put it back on wrong it will still spring up and down but won't engage
Did you find out the solution?
Can I ride my scooter without the kick starter ?
Yes. Just a gear. You would need battery start tho.
It only costs about £13 for a new kick start shaft.
hey i have the same scooter but its still stuck when i assamble it
Did you make sure nothing in the gears?
I fixed my quick start and now my starter pulley don’t work 😭 amén
How do you get the case off after you take out the bolts
Mine came right off. Maybe pry very slightly with a screwdriver
I whack the rear with a rubber mallet, then tilt the top away and downwards
That's not a wrench that's a flathead screwdriver
lmao what a goon.
Hey man, i was wondering if you’d be willing to help me figure out what’s wrong with my scooters kickstarter gear? If you drop your email here I’ll send you an email with specifics and a video to show you what’s going wrong.
Do I still need help?
Hey, could you help me find a new exhaust for my 49cc rocketa?
Jared Zanelli
I was wondering if you could help me with this
@@lucasfain5030 just use google. Or Ebay
@@lucasfain4415 yeah send me an email. Jaredzanelli1@hotmail.com
The second one is the one that gets me,the wife is a bit rude but her husband is a complete ticking time bomb when he's sober, after a drink he's extremely dangerous and the cop treats them with kid gloves., for shame!!
It's Landon english boiiiiiiii
Yo
Fire the camera man. He never had what you are talking about in the frame
Bruh just order a new them teeth are worn down.
Goes n like that.. as he tilts the camera out of view!! Almost comedic, If I wasn't trying to actually see wtf u were doing!! Besides that decent job bromosexual!!
Video sucks!!! Keep say "right here" but can't see what you're talking about!! 🤦♂️