Vw Beetle A Pillar Replacement Rust Repair - Metal Work | 1958 Ragtop Rusty Bug Revival
Вставка
- Опубліковано 22 бер 2023
- The 1958 Vw Beetle ragtop revival continues with A pillar replacement. This rusty Vw Bug needs a lot of metal work, let's weld in some new steel. Next Vids we will do the driver side floor pan and rear crossmember.
Yes Welder : yeswelder.com/?ref=az7b0MRZ
my email - J5150mxVW@yahoo.com - Авто та транспорт
Everyone could use a Larry in their lives... Great progress!
this is where the rubber meets the road, learn all you can...you can put your spin on it later, tanks for sharing
Not Larry Approved 😂 Made me chuckle that
haha! that was funny, your not even attached
You will be a pro soon working with that expert!
thank you, it's great working with Larry
You’ll get better the more you do. Larry approved, love it. You need to get Larry approved stickers
thank you AL :)
There is a man in this video who is super patient.
Looking good Jay.
thank you Dennis
Larry reminds me of my father.
Keep practicing!
thank you, i will
I feel your pain with the welding. I am constantly blowing holes in my welds. I have a feeling that your going to hear "Not Larry Approved" on a regular basis. If I was you I would get a t-shirt made up with "Not Larry Approved" (maybe on the front and back?). That way you don't have to hear it all the time and Larry can just point at your t-shirt when he feels your work is not up to his standards 😀. I am really enjoying these videos .Thanks!!!
Really intersting video's. you are doing well J
thank you, It's been awesome working with and learning from Larry
Coming along fine fellas!!- Have a fantastic weekend..😎
'Not Larry approved'. The important thing is you are learning though! I should say that my welding skills are limited as well so you have my support the whole way through. Thanks for the update Jason and thanks once again to Larry for his wisdom and letting you use his shop. 👍👍
We thank you Stephen 👍 . Yes I am very fortunate to be able to work worth and learn from Larry
Great video guys
"But Larry, the first third is attached." - long pause - "Hang on" Haha great video. The car was a noodle and you're stitching it back together.
Jason, you really need to address your Mentor like this; "Sir Lawrence, Please, May I Have Another Sir!!" Respect Jason, respect.....😅🤣😂 Brouhaha-ha. Great video and thanks y'all. John here, from the back-roads of Northeastern Tennessee.
nice job guys.
we thank you Jim
Larry is a great guy..it's hard to weld. Especially when a parking break is in your stomach...B+
👍....or the chassis bars , I'll take the B+, thank you
Looking forward to the next one!
thank you Tim, I got the last inner fender well welded in yesterday
Jay,
With Larry saying "not Larry approved " on Jenns side of the car, don't want her falling out, make sure you do a great, solid job: otherwise that may cause some serious "domestic tranquility factor issues! 😂.
poor larry lol! those that can, do! those that can't, teach! Larry CAN! LOL!
Never enough time to do it right, but always enough time to do it twice! :~D Love this project.
After seeing your rust I know mine could be fixed,nice video
yes it can👍, we thank you
A for effort Jay!! Im going to buy stock in copper futures!
I like how honest Larry is. It how you learn to do right.
Love it! Student and teacher.
Oh my! Flashing back to me as a kid, doing projects with my Dad! “What do you think?” I’d say, looking for approval. My Dad, like Larry, would look… and slowly shake his head. Larry, like my Dad, has the patience of Job! He actually offered to take over, but allowed you to continue! What a teacher!
You can sense the pain in Larry when he looks at Jason's welds! 🤣🤣🤣#NotLarryApproved
😆🤣😂😭
If your mentor isn’t breaking your balls hard the whole time, are you really even learning anything? 😂 You’re fortunate to have a Larry. Great video, guys.
Great stuff guys
we thank you
Hell yeah Rad Dude!!
What a find Larry is for your channel! You should be congratulated on finding him and in helping him do such a good job on cam. Two distinctly different personalities make for great viewing.
Great video you guys are hilarious together. !
That's passion and craftsmanship converging... Well done!
we thank you Kyle
Larry approved that could be something to consider for merchandise.
Hoodies with Larry approved ❤
Damn J, you didn't have your head into the work man. That was kind of painful to watch my man. Com on you can do this !!!
Thank you for showing the "struggles" along the way! What a great learning experience from a great teacher. Looking forward to the next one!
Jay is lucky to have Larry to guide him, we all benefit from your learning! Thanks to both of you. When do we see and update on Larry’s 57?
would love to see you test fit and show where and how to and where to and what type of weld and seam seal the floor pans in place
Hi Stephen , I have more pan ,cross member footage coming out as well as seam sealer .
Yes indeed Larry is a great teacher and Jason is absorbing the knowledge from Larry's, great video👍🏻🙏🏻☮🍀🇳🇱🇳🇴.Greetings.Hubertus
Great series Jason, you can tell that Larry is getting more comfortable around the camera
thank you, great to hear !
We need not Larry approved sticker’s! Great series Jay!
Ur getting there 👍
some metal going in finally :)....only took me 4 years lol. ( and Larry😎 )
Kudos to you both!
we thank you
It will come out good. Great video as always Jason. Love the collaboration with Larry
You take an old Walmart building and Larry, Mustie1, Jason, and a few more and a volkswagen reassembly plant is born. The blooper reel on this would be hilarious. Not Larry approved. Hmmm. You need bumper stickers with that. " Not Larry approved "
It’s a good thing that you have Larry there to make sure you are doing it right! Loving the videos keep up the great work. Looking forward to seeing the next episode on the floor pan.
Good Sh## ! Thanks Straight Ahead ✌😎
Poor Larry. This must be his penance for bad things he may have done in a previous life 😂😂
However what better teacher could you ask for. The man is a perfectionist and produces excellent work.
Esos carros hno son un tesoro el solo hecho de verlos en abandono da tristesa ..muy bien por las restauraciones campeon uno mas para su coleccion pero me imagino q los amigos se enamoran de sus carros y se los van comprando m gustaria saber cuanto vale uno de esos en eeuu
I think on a lot the stuff for these cars you could actually MIG Braze the panels instead of MIG Welding them. Mig Brazing is lower temperature so you get less warpage and the bond if very strong.
Doing well Jason not an easy repair especially the angles . Thanks larry for the tips
thank you Coco
Being good at grinding is as important at being good at welding 😂
I absolutely concur. I have laid a hundred great beads just above or below the apex of the angle that didn't connect anything.
Time for tea in England but you Americans call it dinner
It's great to see more progress! Even though Larry doesn't approve of some of the work, I'm sure it will be decent enough to be safe and better than a lot of the garbage repaires we've all seen other people perform!
Put down the welder,take 2 steps back and nobody has to get hurt here Jay...😮
👍👍👍👍
Hello guys
Hi Mr M
Larry is so cool. has he sold the 65 vert yet?
:)....not yet, hasn't listed it anywhere
IM pretty sure the inner panel was never welded from the factory. just the edge around then the inner panel was made to strengthen the section. there is a place to weld it from near where the running board mounts.
How do you weld the inner if the outer is not rotted?
gr8 video series you guys are doing!
Im pretty surprised about welding the inner A-Pillar to the heaterchannel, never heard about it in my 15 yrs doing vw bugs or had any being attached when removing the old ones. is that factory? Either way, it's a really good idea! makes me kind of worried, I have not done that on any of my bugs :O
Larry says the inner A pillar is not welded from the factory as you have no access to it. He does it to add strength , especially on a rusty car....only if u have access. He says you did just fine, all is good .
@@5150mxVW awesome! Give him my thanx! And have a gr8 weekend J! Love watching your videos!
😆
You put steering wheel in wrong hole ha ha😊
haha, it happens :)
Try Some "JB WELD"......Lol
I think you needed to turn up your heat! Your "buzzing" sound was not smooth...