I love your channel. I'm currently building a mini ramp in my backyard, it'll be finished in a few days. I've worked in construction for many years. Here's a tip when drilling steel. Get some oil they make a 3 in 1 or you can just use some motor oil. Just put a few dabs on your bit, or spot you're going to drill. Use more if needed. You'll save money on drill bits they'll last a long time. Peace!
Cheers mate! That’s sick! It’s always been a dream of mine to have a mini out in the backyard! ahhhh damn I full on forgot about that! We did that back in high school in metal work lol I should know better but I don’t lol Cheers for the comment mate! 🙌
6:00 forget what "everyones" gonna do! guaranteed 90% haven't built their own box an 100% haven't put it out for the world to see! Keep putting in the work Sean! Respect!
Good work! Shits hard if you don’t do it all the time. Small tip for building boxes - buy a sheet of Masonite that’s the same thickness as your angle iron then after everything you’ve done in this video (except paint) add the Masonite on the top and side so it’s butted up against the angle iron and it will sit flush. This way the top and side are just one flat surface with a metal corner instead of the angle iron sticking out. Doesn’t make a huge difference but a sheet of Masonite is super cheap and it’s a nice little touch. Also Masonite is smooth so you don’t have to paint it but may need to replace it once a year or so it it’s exposed to water
Almost broke out in a domestic...listen to the boss my dude...happy wife happy life...😂 Tip from a carpenter, don't screw it so close to the edge you wanna screw it little more towards the middle A it will stop it from splitting And B if it goes in on the piss it won't matter as much Ether way awesome build dude!
I can give ya some pointers to make life easier bro bro.. When your screwing the ramp together ya need a shorter bit and they also have some that hold the screw in place for you until you run it all the way in that make things really nice.. but you can also just get a circular saw that can take care of all your cuts and its a lil more universal then a miter saw
@@SeanEnuks good to hear Sean! Things are pretty good. Busy with kids going back to school. Picked up a new setup for a decent price. 8.5 baker deck. Indy trucks with spitfire wheels and reds bearings. Rode it 3 times so far. Such a good workout. Keep up the great videos Sean!
If You believe in Your Heart That Jesus died On The Cross And Rose again on The Third day and confess with your mouth that Jesus is Lord then you Will Be Saved
I love your channel. I'm currently building a mini ramp in my backyard, it'll be finished in a few days. I've worked in construction for many years. Here's a tip when drilling steel. Get some oil they make a 3 in 1 or you can just use some motor oil. Just put a few dabs on your bit, or spot you're going to drill. Use more if needed. You'll save money on drill bits they'll last a long time. Peace!
I love your channel. I'm currently building a mini ramp in my backyard, it'll be finished in a few days. I've worked in construction for many years. Here's a tip when drilling steel. Get some oil they make a 3 in 1 or you can just use some motor oil. Just put a few dabs on your bit, or spot you're going to drill. Use more if needed. You'll save money on drill bits they'll last a long time. Peace!
Cheers mate! That’s sick! It’s always been a dream of mine to have a mini out in the backyard!
ahhhh damn I full on forgot about that! We did that back in high school in metal work lol I should know better but I don’t lol
Cheers for the comment mate! 🙌
6:00 forget what "everyones" gonna do! guaranteed 90% haven't built their own box an 100% haven't put it out for the world to see! Keep putting in the work Sean! Respect!
I appreciate that dude! Cheers for the support brother!
That box came out so good!
Good to see you shredding again too 🤘🏽
Thanks bro 🙏 finally able to get back on board
Dude i couldn't stop laughing when you said 'Everyone's gonna judge me.'
Your build came out on point man.
Good work! Shits hard if you don’t do it all the time. Small tip for building boxes - buy a sheet of Masonite that’s the same thickness as your angle iron then after everything you’ve done in this video (except paint) add the Masonite on the top and side so it’s butted up against the angle iron and it will sit flush. This way the top and side are just one flat surface with a metal corner instead of the angle iron sticking out. Doesn’t make a huge difference but a sheet of Masonite is super cheap and it’s a nice little touch. Also Masonite is smooth so you don’t have to paint it but may need to replace it once a year or so it it’s exposed to water
I was asking the Home Depot guy about that but they didn’t have anything on hand… that’s what I wanted to go with!
Almost broke out in a domestic...listen to the boss my dude...happy wife happy life...😂
Tip from a carpenter, don't screw it so close to the edge you wanna screw it little more towards the middle
A it will stop it from splitting
And
B if it goes in on the piss it won't matter as much
Ether way awesome build dude!
Hahaha yea man, I get so frustrated when building stuff lol
Oh nice man, cheers for the heads up! I’ll definitely remember it for next time
Glad to see you skating again!
Thanks mate! I’m so stoked to be back on board
One of the easiest, most useful things a skater can build. Almost a must if you haven't got a decent park nearby
100% dude
This ledge looks hella fun 🤗🤗 Classic Enuks DIY action 🔥🔥
Sure was dude! Haha cheers bro
I did mine too, I learned that if you pre drill the holes the process of building it it’s much easier
I just made one, copied keen Ramp design a little just to make it lighter and easier to move around came out great.
the burning helps melt the wax into the steel. its key to making it slide better in the beginning.
Glad I was doing the right thing with that one lol
I built this same box at the start of lock down! Also we’re skating the same Hockey deck right now haha
No way haha that’s rad!
this inspired me to make a box. Good shit man
Nice box, but Jesus Christ the fact that you didn’t end up in the hospital is the real win here. 🤣 keep skating, my dude.
Should do a piece on the box. Big nice blank canvas
That would be sick
that ledge is super cool my man, love the DIY 🤙
Cheers dude! It’s a lot of fun
Literally just went to bunnings and picked everything I needed and got it all cut. About to put it together. It cost $210 AU. Woooooooo!
Hell yea! Good luck mate! Let me know how it goes
Dig this build man! Loved the skateboarding as well.
Thanks mate!
I really dig this ledge, I'm going to try to make one similar. Just curious man, what happened to your eye?
I can give ya some pointers to make life easier bro bro.. When your screwing the ramp together ya need a shorter bit and they also have some that hold the screw in place for you until you run it all the way in that make things really nice.. but you can also just get a circular saw that can take care of all your cuts and its a lil more universal then a miter saw
Looks good, skates well - nice work!
Thanks! It’s a tonne of fun!
DIY Grind Box Made Simple.....lol "This was a pain in the ass guys, ngl". Too funny. You did it thought so props. Even the pros fuck up.
keen on the diy vid later in the week bro
Me too bro!
shiiii mate the misso isn't bad on the old camera, very smooth hahah
Haha yea she goes alright aye
Good job man. Great video.
Thanks for checking it out! I appreciate the support!
What kind of paint are you using?
i think butter benches are better saves your trucks, less harsh if you fall, more slide, doesn’t scuff as easy, no need to paint, and quiter.
Good work brother.
Thank you !
glad the ankles better bro!!
Thanks dude! Me too!
i miss your quarantine skatepark build bro
Me too :(
@@SeanEnuks what happened to the park now? what building did they build?
Looking great Sean! Hows the healing of the ankle going?
Thanks Ian! Hope you’ve been well my friend, ankle is finally getting back to normal!
@@SeanEnuks good to hear Sean! Things are pretty good. Busy with kids going back to school. Picked up a new setup for a decent price. 8.5 baker deck. Indy trucks with spitfire wheels and reds bearings. Rode it 3 times so far. Such a good workout. Keep up the great videos Sean!
Was you using wood drill bits to drill through steel.
Technically they’re universal drill bits apparently lol, wood metal plastic, but I beg to differ
take that bih apart and cut it down to 5/6 ft and put it back together. the beauty of DIY
Didn’t think of that!
You’re accent is sooooo diferent btw sick vid
What accent mate lol 😂
lol, i'm rocking those exact same blue vans atm too.. bargain hunters!!!
Mine are thrashed as haha
🔥
I did not get the part that you burn the corner. Why is that for?
drill slower, use oil to prevent bits from snapping. Looks sick!
If possible could you tell me the thickness of the angle iron and the top ply layer please?
Love the tricks. The front tail was cool as fuck
how much did the whole thing cost you ?
around $80 usd I believe
How much $ was this
what was the price of all that?
About 80 usd
How many 2x4
How much did it cost?
I think all the wood plus angle was around 80 usd
Sick(edit: first)
Cheers!
😇💙🙏🏽💯
🙌🙌🙌
Just Made myself
Bruhhhh get a Milwaukee impact
dude u gotta guide the screw with ur fingers😭 i’m 15 and know that
Hahaha oh well next time!
do you not have to wear masks anymore in the us?
Mask optional I believe
If You believe in Your Heart That Jesus died On The Cross And Rose again on The Third day and confess with your mouth that Jesus is Lord then you Will Be Saved
I love your channel. I'm currently building a mini ramp in my backyard, it'll be finished in a few days. I've worked in construction for many years. Here's a tip when drilling steel. Get some oil they make a 3 in 1 or you can just use some motor oil. Just put a few dabs on your bit, or spot you're going to drill. Use more if needed. You'll save money on drill bits they'll last a long time. Peace!