How to install 420cc Into Doodlebug Mini Bike

[@trenthollifield6969]

You definitely got a new subscriber love how you actually tell us the problems and the fixes keep on keeping on

[@hellheart1993]

That garage is now my dream. Nothing but mini bikes and useful parts all over.
So beautiful...

[@bobbilly5701]

For the monster moto i just raised the engine almost an inch it fit perfect

[@bakedbrioche]

You think an engine mount will work with 13hp engine?

[@mindovermatter3988]

If you have a cc100x Coleman Doodlebug frame a 420 will fit in there perfectly, slides right in there. All you have to do is extend the motor mount plate like you were saying a little further back so that you can mount the rear bolts because they hang off the back of the stock engine mount plate. But I didn't have to cut the little hoop thing that goes across the frame in the back

[@izzyespinoza4965]

You’re my fav UA-camd now bro 🤣 I’m happy u upload shit

[@bbaaspencer1]

I have a HF 212 hemi and was going to put a 420 in it to make it go fast, but it seems like it too much of a hassle! What about a predator 301 instead?

[@isaacrivera8339]

Couldn’t you just put the clutch on the other way and run one chain

[@rubenjs117]

You can on the baja warrior

[@summerypond]

On the motovox I put the enging up on spacers, gives your oil drain and your airbox more room

[@anthonyreddy2834]

Just curious, could you flip the clutch to get motor more left?

[@Fomogarage]

You could get your engine to sit closer to the center if you flipped your clutch.

[@Celtics4life23]

What kind of clutch did you use?

[@dariobaldiviano9487]

Hi brother im the one fan of ur customise motor ilove itGod bless you bro.

[@boostedmk5gti563]

U should do a riding video when y'all go cruising in a group

[@lsminibikes]

Yessir will do. Looking to get a go pro

[@samsgarage1716]

You have so many mini bikes.👍

[@samsgarage1716]

Did you see the 212cc mini dirt bike I put together? It’s so fast but I need to make it faster.

[@carlosjet8687]

Where did you get that sprocket for the blue minibike?

[@cubanlnkchico9864]

Ur a beast explaining this sh*t 🚫🧢💯🎯

[@starphendaniel6254]

Where do i purchase a 145/70-6 slick tire from

[@starphendaniel6254]

I have a Bahar racer and looking for the wheel combo you are using and where to buy good rear brakes stronger than stock that fit

[@mindovermatter3988]

You do what I do my boy hey, got to love him

[@dmar4501]

how fast can it go with a 420cc engine?

[@Vibess252]

Really tho

[@Vibess252]

Wanna kno before I buy One …. Also wats the clutch size for a 420

[@str8xrippin]

@@Vibess252 1 inch 14 tooth clutch

[@str8xrippin]

@@Vibess252 I don't know why he said it topped out at 45 cause it'll easily do 60+

[@ziggybammurphy1645]

Do u run fuel pumps on ur motors? I read somewhere u gotta change the needle in order to run a fuel pump…and do u have a battery on that to start it, or did u just leave the starter and just pull start it? Id imagine u keep ur bikes as light as possible…awesome builds

[@boostedmk5gti563]

How much?

[@truhver]

maybe you could run an inboard clutch and it'd be around the same spot as the jackshaft?

[@gregrascoe9625]

I have the same mini bike with a built 420cc on it i put a belt drive on it with 3800 stall springs its got a 4ft wheelie bar on it

[@Mr704minibike]

What the gearing 14t to 10t to 10t to 40t in the back

[@nissanflexin7995]

I know this video is old but did u sale the 420cc bike

[@imperial9301]

I’m about to start a build and I’m wondering what is the best frame for a mini bike a Coleman frame or a Mega Moto frame,,, any suggestions?

[@Nico__1997]

Mega moto you’re working with a small tight space and Coleman is bigger but the monster moto I think looks cooler

[@fyre5287]

Do you think I'll be able to fit a torque converter on?

[@nissanflexin7995]

I subscribe to your channel bro

[@ericz8647]

Sweet bikes

[@broke_boiz2857]

Is there any better brakes for them bikes than stock hydraulic brakes or something

[@jermainebroadway2407]

Are you taking on any more work, I have a 420cc predator I would like put on a Coleman Fran.

[@makeitmark27]

Is the db30 frame the same size as the coleman ct100u

[@Back.yard.stunts]

How much would it cost to get a custom job from you? I have a Coleman ct200u-a and I can’t figure out these damn mods.

[@deanriojas]

Hey bro I have 212cc What do I need to make it go faster Who I bought it from He said he put bigger internals inside the motor but it's not fast enough I was going to sell the motor but if you think I can make it go fast it only tops out 50 fi'm trying to go 65 Where do you think I should do to make it go that fast

[@16driver16]

Gearing... larger front sprocket or smaller rear

[@traphouse5718]

please send link for the gas tank currently doing the same build

[@uuumaaadbrrooo9785]

Website on where u get that blue n black and the engine?

[@tylerwells8640]

so would the 212 be quicker?

[@maps3127]

Where did u get those handle bar grips from

[@16driver16]

Get rid of that jackshaft, and flip the clutch backwards and you can center the engine NO PROBLEM 😂

[@mikeyacullo]

I cut my frame on my monster moto to fit my preditor 212 tourqe converter and carb

[@johnnyhernandez8530]

This made me change my mind on my azusa frame

[@marcoNnodice]

Where did you get the jack shaft setup or what would I need to get? I have a clutch and 420 predator already that’s going on a baja warrior.

[@Nico__1997]

This is the back plate of a tav30 torque converter. You could get one on eBay for a lil over 60 bucks shipped. You might be able to find just a backplate

[@brandonsledge159]

Where u get ur wheels??!!

[@backyardfishpondkoifishand5598]

How can I get more power out of 212

[@michaelvaladez3851]

Where do you get the wheels

[@brybrynephew7555]

How much do you sale em for?

[@Napolitano24]

How fast can this hit if I’m 180

[@davemitchell1323]

nice mini bikes.....

[@lsminibikes]

Thanks bud

[@davemitchell1323]

@@lsminibikes your welcome , keep them videos coming...

[@AzttroAudio]

What was the top speed with the torque converter?

[@xaviermccloud4586]

He said about 45 but I don't see why.

[@bonezcuztomz7703]

Great build I got 301 on mines

[@djandison]

nice build!! am located in cali and wanted to know if you can build me a 212 let me know how i can contact you thx

[@Amgc4]

Hey what kinda sprocket did you use and can you tell me where you got it ? Thank you doing the same exact build would love to know where you got the parts. A link would be awesome. Great build

[@lsminibikes]

It’s a steel 420 pitch sprocket on a split sprocket adapter from gopowersports or OMBwarehouse it was a couple months ago I don’t remember exactly but it’s one of those 2 sites

[@Amgc4]

@@lsminibikes thank you .

[@Amgc4]

@@lsminibikes how many tooth sprocket?

[@lsminibikes]

@@Amgc4 think it’s a 40

[@Vibess252]

@@lsminibikes hey man you remember the clutch size by chance I kno 212 take a 3/4 clutch I believe

[@scarce331]

You on any good Facebook groups or anything for these?

[@backyardfishpondkoifishand5598]

Can I put a 301 on a doodlebug

[@noticethenelsonsyet8790]

What your ig I want to see that Camshaft

[@lsminibikes]

Vroom_bop

[@Exolityy]

you think it’s the same thing on a CT100U??

[@lsminibikes]

They are similar frames, might be a little harder because the ct100u is a bit smaller but it’s about the same work.

[@alexanderpapii4866]

@@lsminibikesct100u is smaller than a Baja doodlebug?

[@edgualdino628]

Bro were you been

[@sergiozamora3713]

How do you oil the clutch?

[@summerypond]

Take it off, remove the snap ring and apply high temp grease to bushing. Do not use oil

[@kullijuusto]

@@summerypond yeah i used oil and it started boiling and bubbling mid ride

[@paulwhyte27]

Do you sale any of your bikes im located in Tallahassee

[@teslamodhammer]

Put a 670 in

[@jermainebryson4792]

Wheeler it’s For sell money ready this way

[@sethsgarage5612]

Bro all i want is torque i dont ride streets so ima put a 420 in my doodle bug haha

[@lsminibikes]

Don’t do it bro. Get a 212 swap with 12/70 gearing

[@fatbuddycat]

Its so stupid its dumb. Dumb is the new cool.

[@texasboii5679]

What’s your Instagram

[@lsminibikes]

Vroom_bop

[@texasboii5679]

Thanks bro