Doodlebug minibike gets slammed and stretched
Вставка
- Опубліковано 3 жов 2024
- Doodlebug minibike gets slammed and stretched
Lowered the Tillotson 212 powered Doodlebug minibike with some
weld-on minibike axle hangers, some street tires along with a dual-piston Mega Moto 212 brake. Took the bike out for a road test...
212 Ghost kart racing engine playlist - • 212 Ghost VS 206 Brigg...
Mega moto e-bike playlist - • Raced the QS120 e-bike...
Predator 224 playlist - • Predator 224 gets a 26...
Mega moto performance playlist - • Mega Moto 80/105 unbox...
Bonanza minibike playlist - • 1.3 ratio rockers vers...
Coleman cc100x Predator 212 playlist - • Free Predator 212 perf...
Road rebel go kart playlist - • Kart vs scare chair / ...
Coleman cc100x/DB003 minibike micro bike playlist - • Will a Trumpet exhaust...
Coleman cc100x playlist - • Coleman CC100x Minibik...
Doodlebug playlist - • Is the Doodlebug minib...
Coleman CT200U-EX playlist - • Coleman CT200U EX mini...
Azusa minibike playlist - • Is a Ghost faster with...
Coleman CT200U playlist - • Coleman CT200U minibik...
Predator /Tillotson playlist - • Free Predator 212 perf...
Minibike playlist - • Mega Moto 212 goes 60 ...
Subscribe for more minibike content: www.youtube.co...
Instagram - Doubledown555Black66
______________________________________________________________
Parts used -
Axle hangers - www.gopowerspo...
Street tires - www.studzracin...
Tillotson 212 - www.studzracin...
ARC billet flywheel - www.studzracin...
Tillotson 212 ARC billet rod - www.studzracin...
24MM Flatslide carburetor kit - www.studzracin...
Header pipe - www.ebay.com/i...
Head gasket - www.ebay.com/i...
Mega Moto 212 rear brake - www.studzracin...
Don't forget to leave a comment to let me know if you enjoyed this video! :)
*********Disclaimer*********
Please do not try to re-enact or recreate anything you see in these videos.
Black66 does not take any responsibility for injuries or equipment failure created by doing so.
ALL BLACK66 CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
The bug looks killer man! And the end of the video hit home so hard lol I felt that pain with you brotha haha
Thanks! At least I wasn't far from home lol
@Black66 that's a huge plus man 🙏🏼 my last ride of shame was about 2 miles, when I got home I ordered rlv gold on gold chain asap, never happened again lol
@@Minibike-Isaacoes that Rlv chain really solve the issue? I did the same “stretch” and my chain pops off every ride.
@@chillintmthe chain didn't pop off. It broke.
Hotrodding is always an uphill battle dealing with the laws of physics haha!! Hunger and perseverance is what makes us keep going and only get better everyday!! Keep up the good work!
Good looking bike and excellent fabrication. I enjoy the technical data concerning the gear ratios and engine modification. Awesome episode!
Thanks! Thanks for watching!
Love what you got going on. I'M 60 and still excited about building bikes
I really love your videos. Great work. Simple but learning videos. Keep up the good work
Sorry I been bugging you so long for this one...I'm doing the same thing except I took those plates to my local machine shop to make 2 sets one 2inches and one 3 inches longer!
🤣🤣🤣The doodlebug got a make over and that was funny the chain fell off. At least you were able to coast down hill back home! Good video. 😘💯
A little farther back and you could squeeze 2 motors on there..lol. Happy New Year!
Oh man, that sucks ! Looks a lot more stable and smooth with taller tires and stretch.
Wooooo there it is been waiting for this one!
Best mini bike show out there!
Thanks!
very nice custom job have to stretch a couple of doodles I have here kick ass
Black 66, That bike looks killer! Be interesting to see what the top speed is! 🤔
Sweet,I got a stretched BT200x theme of Oakland Raiders bike..
i told u about that street tire man i wont buy thatone again i litterally had it for two weeks that thing only good for the front i guess or mabey something with full suspension i bet awesome stretchy tho man u keep killin it wit these vids man go get em boss
So jealous love your videos dude
That bubble in the wheel is why I don't like the little street tires on these bikes and I prefer the "real" DOT tires I got for my Razor Mx650.... They're 10x3 and 16x3 (the front wheel is only a 12 inch rim so its confusing) but they're still better than the 8x8s or whatever these are. I've never had a problem w/ them, even at 40mph.... The stock ones would expand and rub so it was a necessity when going from 36v 650w to 48v 2000w then eventually to the 72v/80v 6000w kit Electro and Co sells.
Another reason I stopped running straight chain & clutch I fucking hate it when that damn chain brakes
Currently have a 2012 db30 I've been upgrading, pulled the front wheel from a Japanese scooter to get a taller front wheel with a working speedo, I'm Currently running a 12 tooth clutch with a 40 tooth rear. On a stock motor I've hit 63. Stretch is next on my list.
Awesome! Yes, there is quick and fast. I can gear a bike to go fast but it takes a long time to get there. For me quick and fast is the best. A happy medium.
Like in this video... ua-cam.com/video/xV8i59aGUao/v-deo.html
@@Black66 yeah I should've noted I take a hit at take off but it's comfortable for me to ride on longer roads. The qs120 videos have been having me considering the swap.
@@boa2143658709 Yes! That is why I really love the electric stuff. They are quick and fast! And simple to work on.
This is so dope
❤️❤️❤️❤️
"If the chain don't break." It was a verse in a song, wasn't it?
i was saying you need a better chain while i was watching this.
Ya, for sure LOL
I was scared for you when you were cutting that bar next to the chain👀🤦🏽♂️
But dope content you’ve been teaching me a lot
That baby looks sick with the stretch and the quick paint job makes it even better. Where did you get the tire? I’m getting the mega moto 212 pro but I don’t care for the stock tires and I like the o es you showed today. Thanks for the video and ride safe.
Thanks! Picked up the street tires from GoPowerSports
@@Black66 👍🏼
Thanks for saying what brakes kit fits these brackets . I ordered them from gopower sports it said they would fit the stock brakes they don't . called gopower sports twice they didnt know what they fit either. They need a technical guy to answer the phone in a bad way. But thanks anyway
I have an 18 cc head shaved 80,000 and I went with that cam because it had the same direction as the mod 2 Cam. Whatever I’m just gonna pull the friggin thing out. I’m waiting for my CDI electronic ignition with variable timing battle to help the bike
You could always go back to the Mod 2 . I was using a 265 with less duration that was designed for the lower RPM band. The cam goes well with my supporting parts. With your bigger cam, you could set up the engine to take advantage of the valves being open longer, and that added RPM.
@@Black66 OK I changed out my gas filter I think that was what was doing it. I got exactly the same mile an hour top end but it did pull all the way up. I don’t know if you understand what I’m saying but when you give the gas and the clutch is trying to engage and The clutch shutters and shakes. With this cam it doesn’t do that it just goes straight through to the top so I guess it’s doing what it supposed to. I bought it because they told me at the store it would be faster but I’m not a child I take what it is
Today I did the governor by pass and went to scratch my face because a bug hit me and I hit a pot hole with only one hand on the bike and almost took me out, I hit the back of my ankle one the foot peg, ohhhh did it hurt!
You got too get a gold chain
Thank you for all the great videos. Which dual piston rear brake kit did you use? I'm trying to find a good one for my grandsons mini bike.
I used a Mega Moto 212 rear brake from GoPowerSports.
Thank you very much
New suscríber here . I have a question where did you get the rims ?
Thanks for subscribing. The wheels were picked up used so not sure who makes them but there are some similar wheels on Ali express.
Hey bud how are you it’s me Joe again, always asking you questions I’m sorry but you seem so knowledgeable. This weekend I put 26 pound valve springs and the fire 265 cam. It had 18 pounds Springs with the mod2 . My question is is it normal to have to adjust the carburetor a little bit after putting heavier springs in a bigger cam. Thanks buddy and have a good new year
Yes sir. That bigger cam alone might warrant adjusting the carb . With the different vacuum signals and the different lift and duration specs. I'm always having to mess with jetting and carb adjustments for all the parts I'm swapping around here. It would be cool to have a one size fits all carb. Maybe like one of those fuel injection setups.
@@Black66 One more thing friend, I let the bike idle for 10 minutes or so thendrove it around the neighborhood maybe 3500 RPM 4000 and then I let it idle again today for another 15 minutes do you think the cam is broken in enough to take it for a rip
@@jojojeep1 you should be perfectly fine, my bike stock everything stock and ive been ripping that thing, i got up to 45 just header and carb so you should be fine
The best chainguard in the world. Is that home made or available somewhere
Here is the best chain guard in the world video. Link is in the description of the video. ua-cam.com/video/76ppl4ZmbQQ/v-deo.html
Would these mounts work with a HIAORS Left Hydraulic Brake Master Cylinder?
lol i just bought a box of rLv cause of this vid Unboxing coming 2maro lol
Oh forgot to ask. Did you also have to change the rotor too?
No, I used the same rotor.
Great build and inspiration as I just got a DB30 with a 212. What gas tank is that and where to buy?
Thanks! I use this tank in quite a few videos. I bought it from an eBay seller. And made the mounts. Video on the tank coming soon! I think it was a used vintage tank. Check out the Playlist.
ua-cam.com/video/y3pl7KiSTmY/v-deo.html
I'm doing the same build with my bike at home I was just wondering what header you're using
Check the Doodlebug playlist. The header is a few videos down on the playlist. The links for the parts used are in the description of the videos. ua-cam.com/video/9KE9e-3KHrU/v-deo.html
do you work with pit bikes too
Looks like fun and you have the skills to get it done. I was wondering What color green you are using.
Hey quick question for ya, what size is the wheel and tire on the front? Would like to get something similar thanks!
Why didn't you paint the pegs and kick stand?
Is there any pre fabbed swing arms for the doodle bug frames, do you know?
I still wonder what is the safest tire for mini bikes for high speeds??? The drag bikes that run the knobby up front and slick in the back setup, what brand are they? Are they running tubes? There running 90 plus mph on them…
They are just your standard 5 inch minibike tires with tubes. You can find them at GoPowerSports and places like that.
Where did you get your wheels ? That is the wheel set up that I want
لو انكم تضعون مقاسات الهيكل لكي نصنع شيء مماثل
I cannot find this rear brake that I need, i have the exact same frame with the hangers, could I use any brake?
The brake is in the description of the video
Hey Black66! Just curious what brake caliper you have? I'm looking for a new one but I'm not having any luck.
Did you make the gas tank mount yourself?
Yes, check out the Doodlebug playlist for the tank mount and many parts and engine combos with this bike. ua-cam.com/video/9KE9e-3KHrU/v-deo.html
@@Black66 could I buy one off you?
@@Exclusv I will probaly sell some or give some away on the channel at some point.
Hey bro can you do mined 😊
Could I have that brake tab that you cut off? I need one desperately!
Can you send me a screen shot of exactly the part you want. Its been a while since this video but I might have it lying around. Also check out the doodlebug playlist. I have done many videos with this bike. ua-cam.com/video/141owDJWJgw/v-deo.html
It’s the one you’re cutting off at 2:08 in the video. Not sure how to send a screenshot on UA-cam. I can DM you on Instagram if that works for you. Thanks!
@@bryankemp7159 I used the part in this video...ua-cam.com/video/_pxpPc4PZN0/v-deo.html
What app do you use for speed test
I use digiHUD for top speed and A Dragy performance meter for 0 to 30
Is there another brake I could use as I can’t find any mega moto 212 left hand in stock. Thank you
You could use pretty much any two piston brake from the bigger bikes if your willing to modify the mounting locations.
@@Black66can you tell me the distance between the braket holes I fount a set of brakes that is 63mm distance
what is that rubber chains tensioner your using called and found at seems impossible to find a replacement
If you look on Amazon for chain tensioners and chain tensioner wheels they have quite a few on there.
@@Black66 amazon has plastic ones that get eaten up and splits after a few rides ive gone through a few of them already
@@TOASTyB You can gett he Coleman metal wheel on there also. Thats the one I use on a lot of builds .
@@Black66 thanks! your builds are dope asf really ...that qs120 something sexy too.. also how do i find ride outs in southern
cali
@@TOASTyB Thanks! Check out Volts on Facebook.
Who makes the tank
What size wheels are the electric bike wheels??
6 inch
Which header pipe are you using?
The link is in the description of the video for the header pipe and other parts used in the build.
Where did you get your front wheel
I bout it used. But they have simular ones on Aliexpress
😰😥😢😭
How do you mount your draggy box? Thanks
I usually carry it in my pocket . It is very small
What type of front wheel you got?
Its an 8 inch wheel from Ali express
What size slacker do you have on that front pit bike wheel also will they fit a tire this size 90 656.5in looking to get a new front tire
Spacer sorry
Let me know what size I need for a that size tire and and I have a ct100u front axle with and my tire has no front brake
Hey again. Love the video but I got a question, I got a governor removed preditor 212 on my mini 4 wheeler and it just dosent feel as fast as it should be what would help the most with giving it that extra speed? Jetting or sprocket size 🤔 I got a tourq converter on it also but I feel it's just way to slow for a 212
What did you end up doing to pick up the speed? And how fast was it going?
@@timsolomon8352 i added a tourq converter to it i ended up going a good 45 in snow i heard the tires slow it down but gear ratio can help pickup speed i ended up selling the quad
Where are the mounts from?
I want to stretch my doodle!
The links for the parts are in the description of the video.
What size front tire
Do u know if the volts state 4 pipe will fit on a doodle bug?
What size wheels?
what are the wheels called?
Not sure what they are called but you can get simular 8 inch wheels from Ali express.
What is the exhaust pipe name ? And where can i get it?
looks like a stage 3 pipe from go power sports
First
What size wheels are this and tires?