Nice to see the whole family working together. You have all produced a very pleasing result. Coming to the boat and seeing the transformed deck must also lift morale.😀👍⛵️
не зависимо от национальности, гендера и политических взглядов работа человека своими руками во все времена вызывал у человека только уважение. а если это впереди ещё и радость от использования (то есть от плодов своей работы) - то это вообще самое лучшее удовольствие в жизни! я желаю вам и вашей семье терпения в работе и всего самого лучшего в будущем! вы занимаетесь очень хорошим делом!!! удачи!
Congrats from Seattle, Washington USA. Boating as a family since 1985 and just got back from family reunion with my adult children and 16 grandchildren on the Columbia River in Portland, Oregon
Brilliant job! You could paint panels into the decks now, maybe lighter grey or something,it really makes a difference, I did it to a boat I had years ago. Careful masking and away you go!
Hello again my friend (don't know your name!} Have you ever considered cutting a doorway from your upper steering position (flybridge) directly down into your wheelhouse? It would make a bit of sense to enable you to get from inside the boat, up to the flybridge in a hurry, without going all the way aft.
YES! I’ve been breaking my head over this. It would be a mayor benefit. But I want to honor the lines and restore as intended. But still open for great, innovative but very humble changes . If only to pass the drinks to the captain😄
Hi. Maybe you can remove the old paint with a sharp chisel attached to your drill. I’m not sure if it will work, but it’s an idea instead of using a Tercoo. The name of a boat is quite a thing; sailboats often have names of constellations, workboats are often named after sea creatures, and pleasure craft tend to have female names. For example, if you name your boat something that means “strength,” it can have an opposite effect on the owner. If water tends to pool in certain spots on the boat, you can level it out with epoxy, and if you tilt the boat slightly in the opposite direction, the water will drain away. I recommend looking into the Epifanes paint system: a two-component epoxy primer with zinc, filler, HB coat, and polyurethane paint. It becomes very hard, and it’s definitely recommended if you’re planning to sandblast the hull.
thank you for your comment. the name of the boat is a though one. we've had multiple ideas but none sticked, and I want to feel 100%content with the name as this is not something to go over lightly;
Sigma 280 is een primer met een open structuur en niet geschikt als eindlaag. Ik zou, voordat je het teak weer gaat aanbrengen nog wel een 2k epoxy coating aanbrengen bijv. Sigmacover 350. Sigmacover 350 kan je overigens ook op kaal staal gebruiken, dus zou je zelfs de 280 over kunnen slaan bij volgende klus.
@@markhuston9250 don't worry about it. I love learning from comments, this is what brought me thus far in th boat build. although the 'fase' error was probably due to fatigue. anyway, all is well, thanks for your comment and enjoy the channel.
Hi guy, ik ben er van op de hoogte. Was eerst daarna gaan kijken, maar vermits mijn Teak dek nog veelal in perfecte staat is ga ik voor een renovatie van het oude dek!! Hoera !
![2 YEAR REBUILD OF OLD 50 FOOT CATAMARAN INTO A MODERN BLUEWATER CRUISER - FULL REFIT! [Ep. 1]](http://i.ytimg.com/vi/-p9W0LF5tVI/mqdefault.jpg)
Amazing transformation I'm totally enjoying your channe and the editing and music choices are great
thanks , glad you like it ;)
The only thing more satisfying than painting is watching someone else do it.Again, beautiful lines.
😂
Excellent work ethic from the whole family. Really good to see from the younger ones, rare to see. Nice paint job guys.
Thank you for your nice words
I have been following you closely. Very much enjoy your channel. Thank you 🇨🇦
Thank you for your support!
Huge work done on your great boat my "Bas the Boss"
merci mon mika!
Nice to see the whole family working together. You have all produced a very pleasing result. Coming to the boat and seeing the transformed deck must also lift morale.😀👍⛵️
It definitely does.
Great boat, great family, great work. Great!!
Thanks
Every episode the boat becomes more beautiful. It's nice to watch. Regards. :)
Greetings. Thank you
не зависимо от национальности, гендера и политических взглядов работа человека своими руками во все времена вызывал у человека только уважение. а если это впереди ещё и радость от использования (то есть от плодов своей работы) - то это вообще самое лучшее удовольствие в жизни! я желаю вам и вашей семье терпения в работе и всего самого лучшего в будущем! вы занимаетесь очень хорошим делом!!! удачи!
I am touched by your beautiful words. They inspire and give strength. Thank you
Impressive Job so far. Keep it up.
Great job. She’s looking more fabulous by the day, with those sleek lines and double ender shape the end result will be spectacular.
Thank you for your heartwarming comment
I'm really enjoying your channel. Such a pretty boat. You and your crew are doing an amazing job! Looking forward to the interior build.
Not just there yet. But yes me too!
Super job by a super crew!
Thanks a lot
Thanks a lot
That's going to be a handsome boat...🙂
I think so too
Ziet er strak uit, timeless beauty. Cheers.
Merci Guy!
Great progress.🙂
Beautiful boat! Interesting design. Thanks for sharing. :)
Thank you for your comment
Congrats from Seattle, Washington USA. Boating as a family since 1985 and just got back from family reunion with my adult children and 16 grandchildren on the Columbia River in Portland, Oregon
Wauw respect. Thanks for your comment
Amazing, looks like a different boat
Beautiful lines!
I agree ;)
wow looking good. 😎💚💙👍👍🍺🍺🍻
One step at a time…
Adoro ver esses vídeos mostrando uma família linda, unida, reformando um barco. Lindo ver a alegria de estarem juntos num mesmo propósito.
I could not agree more. Thanks for your comment
Wow! I can almost see the boat sailing again!
Thanks for you lovely comment.
she is looking good
Brilliant job! You could paint panels into the decks now, maybe lighter grey or something,it really makes a difference, I did it to a boat I had years ago. Careful masking and away you go!
Thanks . My goal is to restore the teak that was on there. I love that look.
Thanks for the Nice video 😊
My pleasure Stefan
Hello again my friend (don't know your name!} Have you ever considered cutting a doorway from your upper steering position (flybridge) directly down into your wheelhouse? It would make a bit of sense to enable you to get from inside the boat, up to the flybridge in a hurry, without going all the way aft.
YES! I’ve been breaking my head over this. It would be a mayor benefit. But I want to honor the lines and restore as intended. But still open for great, innovative but very humble changes . If only to pass the drinks to the captain😄
Hi. Maybe you can remove the old paint with a sharp chisel attached to your drill. I’m not sure if it will work, but it’s an idea instead of using a Tercoo. The name of a boat is quite a thing; sailboats often have names of constellations, workboats are often named after sea creatures, and pleasure craft tend to have female names. For example, if you name your boat something that means “strength,” it can have an opposite effect on the owner. If water tends to pool in certain spots on the boat, you can level it out with epoxy, and if you tilt the boat slightly in the opposite direction, the water will drain away. I recommend looking into the Epifanes paint system: a two-component epoxy primer with zinc, filler, HB coat, and polyurethane paint. It becomes very hard, and it’s definitely recommended if you’re planning to sandblast the hull.
thank you for your comment. the name of the boat is a though one. we've had multiple ideas but none sticked, and I want to feel 100%content with the name as this is not something to go over lightly;
Pffff wat een werk, ik weet hoeveel werk het is. We hebben een schip van 50 jaar oud
Zolang het leuk blijft gaan we door!
Sigma 280 is een primer met een open structuur en niet geschikt als eindlaag. Ik zou, voordat je het teak weer gaat aanbrengen nog wel een 2k epoxy coating aanbrengen bijv. Sigmacover 350. Sigmacover 350 kan je overigens ook op kaal staal gebruiken, dus zou je zelfs de 280 over kunnen slaan bij volgende klus.
Dank je voor de nuttige info.
👍🌟🌟🌟🌟👍
There doesn’t seem to be any way for water to escape the fore deck ?
There are 2 thru holes on the side and what remains slides along the gun walls to the side decks . I agree not optimal
PS, the word is *PHASE in the title. Fase is not even a word.
Corrected it. Thanks for the heads up!
Give him a break……..I think he’s been doing a fantastic job language wise.
@@markhuston9250 don't worry about it. I love learning from comments, this is what brought me thus far in th boat build. although the 'fase' error was probably due to fatigue. anyway, all is well, thanks for your comment and enjoy the channel.
Btw, er bestaat nu synthetisch teakdeck, goedkoper en makkelijk zelf te plaatsen, oa. flexiteak.
Hi guy, ik ben er van op de hoogte. Was eerst daarna gaan kijken, maar vermits mijn Teak dek nog veelal in perfecte staat is ga ik voor een renovatie van het oude dek!! Hoera !