Wow, that is an AWESOME machine! I like that it has a regular agitator with fins on the bottom as opposed to the impeller with an auger. It did a fantastic job moving those jeans around. I wish it had more options tho as far as smaller loads. I'm assuming Normal will do a spray rinse? Any chance you could do normal with extra rinse to see if it will do a deep rinse like on the Amana models? Thanks so much for making all of these videos with jeans for me, I'm gonna owe you some new ones lol :)
Yes, the unlike the Speed Queens from 2017 and under, the 2018 models suck! This Maytag is awesome! Just like what the Maytag Man says, "What's inside matters!"
Kirk Rivas Fine video, sir, and the following is just my experience and opinions. I'm glad to see the Extra Rinse option. I have issues with a single rinse cycle getting enough detergent out (while use skin sensitive detergents). I've always gave loads an extra rinse cycle manually. Meanwhile, not helpful for those with limited room or funds for an additional appliance, an extractor gets bit more of that detergent baring water out of your clothing and saves money in the long run (Drying time is shorter saving energy cost and extending life of the dryer and clothing.). Living in an apartment, we fall into the not enough room reason for not having an extractor. There one more (added effort) method I've used was to put a hose splitter on the cold water source for the washer and a second hose available to run water by hand during a spin cycle. That will flush additional detergent out. You will need to run a full spin cycle afterward of course. The older the machine the easier to defeat the spin cycle stop when the lid is open as well. Being in the market for a new machine, I guess my question is if you know off the top of your head of other machines, besides this one (now on my list) in the mid range that you might suggest looking at? I am actively looking myself so please don't think I just being lazy.
I had the same experience, went to buy a speed queen 2018 with deep convection. then saw the Maytag next to the speed queen, sale lady explained the feature which she knew I was looking for 2017 model and knew I did my research, told me it had everything I was looking for and Maytag offered the same quality as speed queen as well warranty. I was sold and they built it on the same line as their commercial washer machine. bought the last one which was the floor display got $80 of the already $100 rebate. Before I bought it, went on youtube and watch video plus comments, it was the nail on the coffin. Had it for one day and so far Love it, too bad for speed queen I was looking forward to being a first-time customer. Hope Maytag continues to make them for years to come, love for people to experience what a real washing machine can do.
I just got my new Maytag. I’m impressed. For those curious about if this machine lets you use true hot water-I used the powerwash cycle and used hot water. I measured 129.9 degrees after washing began. My water heater is on 135. So I’m very happy. I’m sure it may add cold on the normal cycle not sure. Will post later on. Thanks Kirk for your videos. They helped me in my decision making.
Just an update. I’ve washed my queen size comforter no problems. It’s a great washer. I like that on powerwash cycle it does a deep fill rinse and 3 spray rinses. Unlike other washers who spray water at the agitator this washer actually drenches your clothes then spins them out. Excellent washer.
Very nice washer. This is what consumers like; a washer doing what it supposed to do. No fancy bells and whistles. The rollover is wonderful. The one down fall about this machine is that its primarily designed for large loads. I don't see much options for smalls loafs on this washer. Can you do one on "Normal" so we can see what this washer can do? Thanks for posting this video.
Pinch Me! I saw actual agitation in late 2017. Then it changed strokes and over the coarse of the wash it became any number of Whirlpool and Maytag washers I've had over the years. Couldn't be! Must be this new blood pressure medication because washing machines don't agitate anymore!
Hi Dennis! This seems to be a special unit. Too bad Thanksgiving is tomorrow, I wanted to film more cycles. I'll be back in town on Friday for more runs.
I went to buy a Speed Queen and left with this washer. I really like it. This is the closest I could find to my beloved 25 yr old Roper (whirlpool). The dual agitator and full tub of wash and rinse water washes as well if not better than my old direct drive Roper. Not a lot of options but I care more about a thoroughly cleaned wash than I do all the features. I usually only use a couple different settings anyway, I'm a simple guy.
I had the same experience, went to buy a speed queen 2018 with deep convection. then saw the Maytag next to the speed queen, sale lady explained the feature which she knew I was looking for 2017 model and knew I did my research, told me it had everything I was looking for and Maytag offered the same quality as speed queen as well warranty. I was sold and they built it on the same line as their commercial washer machine. bought the last one which was the floor display got $80 of the already $100 rebate. Before I bought it, went on youtube and watch video plus comments, it was the nail on the coffin. Had it for one day and so far Love it, too bad for speed queen I was looking forward to being a first-time customer. Hope Maytag continues to make them for years to come, love for people to experience what a real washing machine can do.
@@LMOBPRODUCTION I went to buy a Speed Queen TC5 and after I'd checked it out in person the guy showed me this Maytag and a couple videos of side by side wash and now I'm completely confused. I'd like to know about doing small loads. It's just my husband and I but I do pretty big loads of towels and occasionally bedspreads or throw rugs often. I just like the option that my really old Maytag now has of doing a small load.
@@nancymerrey1672 not to sure about small loads. That could be one of the cons of the machine. If not mistaken when the dial is set to normal the wash is shorter and I notice that when washing loads I will hear the washer add water. Not sure if it has a water/wash sensor. Over all, if you want a old style washer that deep cleans, then this Maytag is your best option. Also I seen UA-cam videos that state and show that speed queen listen to their customer and went back to pre 2017 model. So now you have more options. I would search for the new speed queen after 2019 that have more options for small loads etc. the sale person should have know about the updated speed queen. Hope I was able to help. Best of luck. 😎
@@LMOBPRODUCTION Thanks! The more I read, the more I'm convincing myself to go with the Maytag. When I consider that there's a 3-6 month waiting list for the SQ and the Maytag is in stock....
This is the only one I've found that agitates aggressively like the old ones, allows you to open the lid while in operation like the old ones, and even looks like the old ones!
I would like to see what it looks like inside of this Maytag Commercial Washer with the front cover taken off, if you can of coarse,. showing the drum and motor. Great videos. keep up the good work.
Finally a real washing machine! Almost as good as the Amana in everything but the price. I’m waiting on Amana,s commercial model to come out, then I’ll decide which to buy. Otherwise I’ll have to buy 3 standard Amana washers for the price of one of these.
Just got this over speed queen. The best top loader with agitator. Washes very well. I was very disappointed that Speed queen changed 2018 model. Very sad. I wash everything on power wash. Everything comes out clean. Only one draw back is very loud. But what do you expect if you want clean clothes.
I also couldn't believe how short the wash time was, I think it was around 9 minutes. At first I was like thats not long enough, but then again I said look at how it washes, just like the direct drive machines, and that was PLENTY of time in those.
yo tenia esta lavadora, se rompio una pieza, el arreglo costaba igual que comprar una nueva...yo sin empleo no pude hacer nada, me quede sin nada...la extraño y necesito tanto...
Apparently the four Cycles use deep water, but the normal cycle uses 1/2 tub of water which will be appropriate for smaller loads. I'm sure some people are water conscious, but not me I use 10,000 gallons a day.
Great washer but I feel that they made two overlooks with this washer 1 no water level control (say you want to wash a few delicate pieces why a complete deep fill) and secondly no SOIL level adjustment. That’s being frugal on there part in my opinion other then that, it washes very well. Only time will tell on its longevity.
@ petermazbabie . After what I've been through with anemic water miser HE washers, Quite frankly I wouldn't give a rat's ass if this washer fills with more water than it needs. Because that would mean my clothes are getting thoroughly cleaned and RINSED, no matter what! Gee, what a concept.
What is rinse water temp? Don't see any options to select rinse water temp. Does it rinse with whatever temp u select to wash? (Hot wash/hot rinse,warm wash/warm rinse)??
Want a great machine? Find a Whirlpool made direct drive washer. I had a Maytag 765 "HE" set that was $1900.00, couldn't deal with it's long cycles, and crappy performance, so I sold them, found a 2005 Whirlpool direct drive, rebuilt it at very little cost, and I intend to keep it going as long as I can find parts.... should parts begin to become hard to get, I'll order spares and put them aside. Today's machines are absolute garbage!
So no load size selector? Nice that it uses plenty of water, and looks like great agitation, but for ppl who do frequent small or medium loads, load size selector is pretty basic.
I’m having this washer delivered tomorrow. I was going to get a Speed Queen until they changed them. Fingers crossed that I don’t have any problems with my first few loads. I will post an update after I use it for awhile.
@@trevordoeshalloween5994 It’s fantastic. It washes the clothes really well and the water level fills up high. The only learning curve I have had with it is that you can’t just throw a blanket in and wash it. You have to wash 2 blankets or throw some towels in also or it shakes all over the place. Performance wise I’m very happy.
Is there a newer version of this washer? I like what I see from this agitator and the overall performance, but I'm curious if this model has been upgraded? I see the review is from 2017. I need a new washer by next week. Model: MVWB765FW appears to have a weak agitator.
How do you remove the lid switch? I want to do that to mine. I figured out how to do it on my old MaytagLA412 but not this one yet. The way I see it if their going to make machines like that they should at least use glass lids that you can see through.
How are you "closing the lid" without actually doing so on camera? Is there a connection (button/link) that you depress that fools the machine into thinking the lid is actually closed.? Please reply! This is an essential feature for me.
Fiddle DeeDee I know some people unscrew the latch from the top of the door and put it in where the latch is supposed to go so you can open the machine and see it run
Exactly what Marco said, two screws on the lid takes the whatever you call it off the lid and you stick it in the hole in the body which will let the washer run. But beware to put it back on the lid if you ever have a maintenance guy come to service the unit, because it may void the warranty.
I’m speechless...the quick agitation is interesting..i understand it at the beginning to mix up the detergent (my assumption in the residential agitator model)...but this one doesn’t seem to need that,..I wonder what the logic is for that.. also, why do belt driven machines always have loose baskets that move and wobble so much? Is that necessary by design? I don’t recall our direct drives having a basket that moved much if at all.
The direct drive washer were attached to the base (floor of the washer). The new designs are suspended by rods at each upper corner of the machine. Tub is basically hanging on the rods. The motor and drive system are attached to the bottom of the outer tub. I have not opened this machine to confirm on this model.
Been using this washer for a week now and can't find any difference between Powerwash, Mixed, Sheets/Towles(bulky). As all 3 of those use the full tub of water. Is there a difference?
You know this washer would be perfect if whirlpool could get the load sens to be more accurate and be able to determine if its a small medium or larg load and go back to the 3 water level sizes while still giving the user the option to bypass the load sensing that way it meets the government epa soeca as well. I would be okay with the auto size slect if it could more accurately determine the load size. Like with moter strain or amps instead of weight because there is a lot of items that are large but dont weigh very much sonthe weight calculations are inaccurate. If the load sensing could be better perfected with these agitator washer and havs the ability to manually select the load size the washer woukd be perfect.
Obviously great washing action but seems like it will beat the heck out of your clothes. Should be water level settings like the Speed Queen. Don't understand what water level is if you don't use deep water. Wash action seems far superior to the new 2018 Speed Queen top load washers. I cannot believe how hard it is to find a machine that actually washes your clothes. The new fangled top loaders don't do anything whether they have an agitator or not. Super unhappy with Maytag top loader I bought. Probably returning it for something else.
Just got this washer delivered today. To my surprise it doesn't agitate or spin! I just hear a hum coming from the control panel when it's supposed to be agitating and spinning. Already having to call Maytag and have a tech look at it. Very disappointing, I was looking forward to using this washer.
Thank you for your videos! I can't seem to find a lot of reviews for the Maytag and I'm trying to decide bw this Maytag, the Speed Queen LWN432SP115TW01, and the Speed Queen LWNE22SP115TW01. Do you have any opinions that would separate one of these machines as better for durability and how well it cleans the clothes? Thank you!
Does anyone know how well it rinses? I have an AWN542 Speed Queen that does not rinse well and that's with using Tide he turbo and he amounts for a full load. Are them temps dumbed down?
Spin looks really slow. Clothes come out really wet? I really want this washer but cannot afford to make $800 mistake. Also, it's going to use a lot of water!!!
In this video, you mention popping open the lid, but I never saw a lid close nor open. How are you replicating the lid closing? Is there a depression that one can push in somewhere, to do the same thing as a lid being closed? I ask because I often use powdered additives - borax, Oxyclean, resolve gold, Calgon - or sometimes fabric dye (RIT) and all of these need to be dissolved in water and I don’t have access to any water in my basement laundry room other than via the washer (ie. no sink, no tap) Your reply would be appreciated so much! Thx!
Sorry, I can not go into details on how to defeat the lid switch for liability reasons. The god thing is that on this washer it only locks during the spin cycle so that you can open the door during fill and agitate.
Kirk Rivas could you private message me then? Opening the lid STOPS ALL WASHER AND AGITATION though, so it doesn’t help for the situations I mentioned above.
Curious if you were to buy a commercial grade TL machine would you go with this one or a 2017 Speed Queen? Features Benefits, build quality comparisons?
This is a very loaded question. But I will keep it short and sweet. No doubt the 2017 Speed Queen is a great machine, but the 2017 models are just about gone. While Speed Queen is transitioning their top load washer design, Whirlpool took the opportunity to introduce a true competitor. It seems Whirlpool did their home work plus has more experience in the HE style top load washers. I look at build quality two different ways. First, I love seeing metal everything and appreciate the heavy weight of an object. This makes it feel solid, secure and strong. Secondly, on the other hand, I appreciate a well engineered machine. Not all parts of a machine need to be overbuilt. A smart design can use metal and plastics together (only reinforce what needs to be reinforced) this makes it more affordable. I'm not a mechanical engineer although I studied chemical engineering at the University of Texas (dropped out after 5 years) so I do not feel qualified to talk about build quality between the two machines. Features, in the most basic sense, are easy to compare. They both use plenty of water to wash and rinse. I like the simultaneous drain and spin of the Speed Queen(2017 only). I like the dual action agitator of the Maytag. I have owned a front load washer (Frigidaire and Electrolux) for the past 18 years. I felt pressure to buy a 2017 Speed Queen top loader before they disappeared, but after the introduction of the Maytag, the pressure went away. I decided just to keep the Electrolux front loader. Sorry for the vagueness, but I'm a dealer for both brands and my videos circulate in the corporate offices.
Thank you for posting this.Do you know if they make this in a larger capacity ?..looking for a new washer and this will be it unless they have a larger capacity one.
I have a smaller model (top loader; old school) and I can do a set of twins plus a set of queen sized in one load so this baby should handle that with no problem.
The agitator seems to be doing a great job. It has been around for years (design). Some people feel that it might be too aggressive. It is designed to scrub clothes and create a lot of turnover compared to the single piece agitator.
Thank you for recording this video. I have a request: The Kenmore 20372 top load washer. Can you also do a small load of this Maytag washer? Thank you for your time.
High LS. I'm doing the exact same comparison and I'm almost certain I'm going to get the Maytag in this video. If you Google the tc5000 and watch videos on it you can see how gentle the agitation is compared to this Maytag. There is even a comparison video between Speed Queen and Maytag commercial with white towels and ketchup that shows a drastic difference between the cleaning ability. Probably will be compromising in longevity but for me my clothes need to be good and thrashed and clean so that's more important to me.
Hello! Because SQ is still doing their 10yr warranty until the end of the year, we actually bought the SQ TC5/DC5 set yesterday! They won't be delivered until the 30th but I'm excited and can't wait to wash all the things. Where we live this Maytag is almost $1000, same as the TC5 but I was able to get the SQ set for less plus an add'l rebate through the dealer. Based on price, warranty and build I felt good going with SQ especially since I've only read good things. Let me know what you think of the Maytag if you get it! I've never been so excited or ready to wash clothes! We currently have a 2.5yr old GE front load system and despite leaving it open, bleach-cleaning it monthly and using vinegar in the rinse cycle our towels and many clothes smell musty and just ... gross. It has also had black mold issues in the detergent drawer/tunnel even when completely removing it and emptying water then letting it air dry on top of the washer. NEVER AGAIN!! I hope SQ is everything everyone says it is (except for those TR models!).
@@LucyFisher-qh2mz the warranty is a good sign for the SQ. The only thing that will probably turn me is that I wait to do a load when I have a full load and my clothes are usually good and dirty (cleaning, gardening, always spilling coffee and sometimes used instead of a napkin hehe) by the time they are being washed. If I did loads more frequently and wasn't so messy I would go w the SQ. I hope you have the experience you are hoping for. One commenter remarked that she wanted to light her washer on fire and after committing to an appliance you hope to be happy with for 10 years, I could completely feel her pain.
@@SB-iz2fk I just wanted to say we got the SQ TC5 on 11/30 and it is a dream! I am in love with it and am excited to wash clothes. Our previously mildewy-smelling and rough clothes and bath towels have come out smelling clean and softer!
If you wait much longer, you will not have a choice. I'm a dealer for both brands and on this public forum It's hard to give my opinion on which one to buy. But if somebody came into my store shooting, I would feel more safe hiding behind a Speed Queen. Call me at the shop when you get a chance.
The floor needs to be stable, concrete slab would be the best. This machine may not be for you if your floors need to be reinforced. Older machines could overcome an unbalanced load. These newer type of machines hate a load that does not spread out evenly. Too much weight on one side of the tub will make it shake/vibrate. Try loading it differently.. Let me know how it works out. Call me at the shop if you have any questions.
@@kirkrivas8172 Thank you! The floor is rock solid, so I'm reasonably certain that that's not the issue. Was wondering if maybe something may have been shifted/unhooked/mis-adjusted in delivery or shipment. A service guy is going to have a look at it for us, though. Thanks for the quick replay!
It's a shame, this washer has a lot going for it, but I have heard of some shaking issues from a couple of people on the channel and one of my customers. My customer was not upset but noticed it shakes more than her older machine. I assumed she had an older Maytag or Whirlpool machine. She was still willing to buy another pair for her lake house but she needed stacked units.
@@kirkrivas8172 mine will shake if i throw my bathroom carpet piece in it because it becomes unbalanced but other than that all other loads are perfect. What do you think about the matching dryer with this?
It doesn't have a Clean washer button/knob. I like that. What's with the other models that have a clean button? Never had one on the older machines. They seem to have come out with the clean button on the machines that only use a small amount of water.
You can clearly see when he is loading the jeans into the washer, the part of the switch on the lid is stuck into the lid switch hole on the body, take two screws off to accomplish this. Be warned though make sure you put the part back on the lid if it ever needs service, as this may void the warranty.
The normal cycle uses less water. If you look at the dial, all of the cycles highlighted in blue are deep wash with deep rinse. The normal cycle is less wash water and only a spray rinse.
I do not know the amount of water it uses, but it will not fill as high and it will do a spray rinse. I encourage my customers to use the extra rinse if they use the Normal cycle.
I read that if you use Normal cycle, it fills the tub half full for wash and half full for rinse. I really like the wash action of the 575GW but I'm concerned that it will beat the heck out of my significant other's clothes and delicates. Also, I don't like that you only have two water level choices...full tub or 1/2 full tub. The Speed Queen machines have settings for small, med. and large loads but I don't like the wash action of the new Speed Queen machines. I'm kicking myself for not buying a 2017 Speed Queen top loader. The Maytag 565FW is going back to the store. So, I have to decide on a machine to replace it. Right now, it's going to be the Maytag 575GW or a front loading washer, probably LG. If I get the 575GW and don't like it or it's too rough on the clothes, then I'm sunk because dealers that sell the machine are not going to take it back and it costs around $900 plus tax to buy locally. This is not fun at all. I appreciate what you do, Kirk.
I will throw a delivery blanket in this unit soon. I'll do the one blanket test and then the two blanket test. Even though I'm from Texas, I'm not sure how big the horse blankets are.
Probably a bit larger than a king-size comforter. I would especially like to see how the two GE units you tested earlier can handle a king-size comforter: The 4.6 cubic foot with the impeller, and the 4.5 cubic foot with the agitator. I really want to see if buying one of those machines would save me money over a front loader. I'm guessing it would be best to wait, and save up for the front loader.
Apparently I am losing it from watching these videos bc I keep expecting this question to go to the ridiculous like can I wash a drum full of legos or my neighbor's cat.
Great washing action but looks like the machine tangled up those jeans pretty good. I didn't see any indication that they came out "dripping wet." Right now, my head is spinning. No clue what machine to buy. Time to sleep on it.
We sold plenty of these machines, one had a problem, the shifter was bad, but it was intermittent so it was hard to diagnose but we finally solved the problem. You can buy the Maytag with confidence.
Thanks for the input, Kirk. What really scares me about the Maytag is the slow spin speed issue. If the clothes come out of the washer "dripping wet," they will take much longer to dry and shorten the life of my dryer as well. I might spring for a Speed Queen TR7 but I just can't get past that washing action. Recently, I was told by someone in the appliance business, "I would not buy a Speed Queen and I am not selling the new Speed Queens to my customers...period." I'm ready to buy an Amana washer for $399 and call it a day. Throw it away when it breaks in a year or two.
@@irwing654 i called my plumber to make sure our old house could handle the draining from a Speed Queen and told him what I was debating between, and he told me he got a $400 Amana to do the shop blankets and he thinks it's GREAT. I'm even more confused.
Somewhere on UA-cam I saw someone place a magnet on another brand machine where the lid closes on top of the magnetic latch. It fooled the machine into thinking the lid was locked. But I thought on this Maytag the lock only locked during spins?
Wow, that is an AWESOME machine! I like that it has a regular agitator with fins on the bottom as opposed to the impeller with an auger. It did a fantastic job moving those jeans around. I wish it had more options tho as far as smaller loads. I'm assuming Normal will do a spray rinse? Any chance you could do normal with extra rinse to see if it will do a deep rinse like on the Amana models? Thanks so much for making all of these videos with jeans for me, I'm gonna owe you some new ones lol :)
Those jeans do not fit anymore. It's all good.
Yes, the unlike the Speed Queens from 2017 and under, the 2018 models suck! This Maytag is awesome! Just like what the Maytag Man says, "What's inside matters!"
Kirk Rivas Fine video, sir, and the following is just my experience and opinions.
I'm glad to see the Extra Rinse option. I have issues with a single rinse cycle getting enough detergent out (while use skin sensitive detergents). I've always gave loads an extra rinse cycle manually. Meanwhile, not helpful for those with limited room or funds for an additional appliance, an extractor gets bit more of that detergent baring water out of your clothing and saves money in the long run (Drying time is shorter saving energy cost and extending life of the dryer and clothing.). Living in an apartment, we fall into the not enough room reason for not having an extractor.
There one more (added effort) method I've used was to put a hose splitter on the cold water source for the washer and a second hose available to run water by hand during a spin cycle. That will flush additional detergent out. You will need to run a full spin cycle afterward of course. The older the machine the easier to defeat the spin cycle stop when the lid is open as well.
Being in the market for a new machine, I guess my question is if you know off the top of your head of other machines, besides this one (now on my list) in the mid range that you might suggest looking at? I am actively looking myself so please don't think I just being lazy.
I had the same experience, went to buy a speed queen 2018 with deep convection. then saw the Maytag next to the speed queen, sale lady explained the feature which she knew I was looking for 2017 model and knew I did my research, told me it had everything I was looking for and Maytag offered the same quality as speed queen as well warranty. I was sold and they built it on the same line as their commercial washer machine. bought the last one which was the floor display got $80 of the already $100 rebate. Before I bought it, went on youtube and watch video plus comments, it was the nail on the coffin. Had it for one day and so far Love it, too bad for speed queen I was looking forward to being a first-time customer. Hope Maytag continues to make them for years to come, love for people to experience what a real washing machine can do.
I just got my new Maytag. I’m impressed. For those curious about if this machine lets you use true hot water-I used the powerwash cycle and used hot water. I measured 129.9 degrees after washing began. My water heater is on 135. So I’m very happy. I’m sure it may add cold on the normal cycle not sure. Will post later on. Thanks Kirk for your videos. They helped me in my decision making.
I washed clothes on normal and the hot water isn’t straight hot. So if you want all hot use powerwash!! :)
Just an update. I’ve washed my queen size comforter no problems. It’s a great washer. I like that on powerwash cycle it does a deep fill rinse and 3 spray rinses. Unlike other washers who spray water at the agitator this washer actually drenches your clothes then spins them out. Excellent washer.
Still have it?
Love this washer! Finally they’re bringing back the dual action agitator 😊thank you for the video . I think this is what everyone wanted lol
Now add a little more oomph to it :)
Kirk Thank you for posting - this has really good wash action - impressive especially since Whirlpool has not produced anything worthwhile in years!
That spin cycle is a beast! I love it.
Nice. This is how my 2002 Kenmore washes. I didn't think anything was made like this anymore.
...Just ordered one of these bad boys... looking forward to it !...
@@patcola7335 ...it's a tank of a washing machine...I recommend it !...
Very nice washer. This is what consumers like; a washer doing what it supposed to do. No fancy bells and whistles. The rollover is wonderful. The one down fall about this machine is that its primarily designed for large loads. I don't see much options for smalls loafs on this washer. Can you do one on "Normal" so we can see what this washer can do? Thanks for posting this video.
Pinch Me! I saw actual agitation in late 2017. Then it changed strokes and over the coarse of the wash it became any number of Whirlpool and Maytag washers I've had over the years. Couldn't be! Must be this new blood pressure medication because washing machines don't agitate anymore!
It looks like this machine will actually clean your clothes. Imagine that.
Hi Dennis! This seems to be a special unit. Too bad Thanksgiving is tomorrow, I wanted to film more cycles. I'll be back in town on Friday for more runs.
BTW, Happy Thanksgiving!
Kirk Rivas And a Happy Thanksgiving to you and your family also.
I went to buy a Speed Queen and left with this washer. I really like it. This is the closest I could find to my beloved 25 yr old Roper (whirlpool). The dual agitator and full tub of wash and rinse water washes as well if not better than my old direct drive Roper. Not a lot of options but I care more about a thoroughly cleaned wash than I do all the features. I usually only use a couple different settings anyway, I'm a simple guy.
Nice, I like this washer too. Please keep the channel posted on what you like or dislike about this washer. Thanks for your comments.
I had the same experience, went to buy a speed queen 2018 with deep convection. then saw the Maytag next to the speed queen, sale lady explained the feature which she knew I was looking for 2017 model and knew I did my research, told me it had everything I was looking for and Maytag offered the same quality as speed queen as well warranty. I was sold and they built it on the same line as their commercial washer machine. bought the last one which was the floor display got $80 of the already $100 rebate. Before I bought it, went on youtube and watch video plus comments, it was the nail on the coffin. Had it for one day and so far Love it, too bad for speed queen I was looking forward to being a first-time customer. Hope Maytag continues to make them for years to come, love for people to experience what a real washing machine can do.
@@LMOBPRODUCTION I went to buy a Speed Queen TC5 and after I'd checked it out in person the guy showed me this Maytag and a couple videos of side by side wash and now I'm completely confused. I'd like to know about doing small loads. It's just my husband and I but I do pretty big loads of towels and occasionally bedspreads or throw rugs often. I just like the option that my really old Maytag now has of doing a small load.
@@nancymerrey1672 not to sure about small loads. That could be one of the cons of the machine. If not mistaken when the dial is set to normal the wash is shorter and I notice that when washing loads I will hear the washer add water. Not sure if it has a water/wash sensor. Over all, if you want a old style washer that deep cleans, then this Maytag is your best option. Also I seen UA-cam videos that state and show that speed queen listen to their customer and went back to pre 2017 model. So now you have more options. I would search for the new speed queen after 2019 that have more options for small loads etc. the sale person should have know about the updated speed queen. Hope I was able to help. Best of luck. 😎
@@LMOBPRODUCTION Thanks! The more I read, the more I'm convincing myself to go with the Maytag. When I consider that there's a 3-6 month waiting list for the SQ and the Maytag is in stock....
This is the only one I've found that agitates aggressively like the old ones, allows you to open the lid while in operation like the old ones, and even looks like the old ones!
I would like to see what it looks like inside of this Maytag Commercial Washer with the front cover taken off, if you can of coarse,. showing the drum and motor. Great videos. keep up the good work.
joey7200 I second this. Love to see the washer in action without the front cover.
Finally a real washing machine! Almost as good as the Amana in everything but the price. I’m waiting on Amana,s commercial model to come out, then I’ll decide which to buy. Otherwise I’ll have to buy 3 standard Amana washers for the price of one of these.
So it looks like this is the best top load washer now in 2018?
Excellent turnover!
Just got this over speed queen. The best top loader with agitator. Washes very well. I was very disappointed that Speed queen changed 2018 model. Very sad. I wash everything on power wash. Everything comes out clean. Only one draw back is very loud. But what do you expect if you want clean clothes.
I also couldn't believe how short the wash time was, I think it was around 9 minutes. At first I was like thats not long enough, but then again I said look at how it washes, just like the direct drive machines, and that was PLENTY of time in those.
It is scary how fast this machine can wash a load of clothes!!!!!!!!!!!!
Wow really nice machine with good washing action!!! Kirk can you do a load on the "Normal" cycle please???
Sure, I plan on keeping this unit in the shop and film plenty of combinations of wash. My next upload should be Friday or Saturday.
Impressive. But the gearshaft sounds cheap
Why does it run the pump in the beginning of the rinse fill?.
yo tenia esta lavadora, se rompio una pieza, el arreglo costaba igual que comprar una nueva...yo sin empleo no pude hacer nada, me quede sin nada...la extraño y necesito tanto...
qual pieza?
Hey Kirk , what’s the difference between tap cold and cold water on the water selector?
The only thing I don’t like is that you cannot select different water levels
Apparently the four Cycles use deep water, but the normal cycle uses 1/2 tub of water which will be appropriate for smaller loads. I'm sure some people are water conscious, but not me I use 10,000 gallons a day.
Great washer but I feel that they made two overlooks with this washer 1 no water level control (say you want to wash a few delicate pieces why a complete deep fill) and secondly no SOIL level adjustment. That’s being frugal on there part in my opinion other then that, it washes very well. Only time will tell on its longevity.
@ petermazbabie . After what I've been through with anemic water miser HE washers, Quite frankly I wouldn't give a rat's ass if this washer fills with more water than it needs. Because that would mean my clothes are getting thoroughly cleaned and RINSED, no matter what! Gee, what a concept.
What is rinse water temp? Don't see any options to select rinse water temp. Does it rinse with whatever temp u select to wash? (Hot wash/hot rinse,warm wash/warm rinse)??
I see this machine being a top seller. It may also rival the new speed queen top loader that is coming out.
Want a great machine? Find a Whirlpool made direct drive washer. I had a Maytag 765 "HE" set that was $1900.00, couldn't deal with it's long cycles, and crappy performance, so I sold them, found a 2005 Whirlpool direct drive, rebuilt it at very little cost, and I intend to keep it going as long as I can find parts.... should parts begin to become hard to get, I'll order spares and put them aside. Today's machines are absolute garbage!
What is the difference between tap cold and cold?
So no load size selector? Nice that it uses plenty of water, and looks like great agitation, but for ppl who do frequent small or medium loads, load size selector is pretty basic.
I like how this washer functions. Also when the washer fills with water, is it timed or does is know when it has enough.
What is the height of the washer with the lid open? Trying to figure out if it will fit under a cabinet. Thanks!
I’m having this washer delivered tomorrow. I was going to get a Speed Queen until they changed them. Fingers crossed that I don’t have any problems with my first few loads. I will post an update after I use it for awhile.
How is it?
@@trevordoeshalloween5994 It’s fantastic. It washes the clothes really well and the water level fills up high. The only learning curve I have had with it is that you can’t just throw a blanket in and wash it. You have to wash 2 blankets or throw some towels in also or it shakes all over the place. Performance wise I’m very happy.
@@Winterhater555 sounds like a great washer. Clothes get clean and it's reliable.
Is there a newer version of this washer? I like what I see from this agitator and the overall performance, but I'm curious if this model has been upgraded? I see the review is from 2017. I need a new washer by next week.
Model: MVWB765FW appears to have a weak agitator.
The way most of them used to be made in the USA throughout the 80s and 90s, until the engineers and designers had a brain hemorrhage
It was actually the government that mandated we wash our laundry more "efficiently" using less water. 😒
@@mariacastillo5625 Yes, yet have to rewash because they dont get clean, and these cycles go on FOREVER.
This is awesome!
You say you are going to lift the lid but it looks like it is already lifted. How else could you film it while its running?
I’d like to see the inside of control panel. Is it big computer board or mechanical switches with contacts?
How do you remove the lid switch? I want to do that to mine. I figured out how to do it on my old MaytagLA412 but not this one yet. The way I see it if their going to make machines like that they should at least use glass lids that you can see through.
How are you "closing the lid" without actually doing so on camera? Is there a connection (button/link) that you depress that fools the machine into thinking the lid is actually closed.? Please reply! This is an essential feature for me.
Fiddle DeeDee I know some people unscrew the latch from the top of the door and put it in where the latch is supposed to go so you can open the machine and see it run
Thanks, Marco. I'll look into that! I appreciate your reply.
Exactly what Marco said, two screws on the lid takes the whatever you call it off the lid and you stick it in the hole in the body which will let the washer run. But beware to put it back on the lid if you ever have a maintenance guy come to service the unit, because it may void the warranty.
I’m speechless...the quick agitation is interesting..i understand it at the beginning to mix up the detergent (my assumption in the residential agitator model)...but this one doesn’t seem to need that,..I wonder what the logic is for that.. also, why do belt driven machines always have loose baskets that move and wobble so much? Is that necessary by design? I don’t recall our direct drives having a basket that moved much if at all.
The direct drive washer were attached to the base (floor of the washer). The new designs are suspended by rods at each upper corner of the machine. Tub is basically hanging on the rods. The motor and drive system are attached to the bottom of the outer tub. I have not opened this machine to confirm on this model.
Does this machine have a alarm to let you know it's finished?
Been using this washer for a week now and can't find any difference between Powerwash, Mixed, Sheets/Towles(bulky). As all 3 of those use the full tub of water. Is there a difference?
Can you do presoak and extra Rinse
I'd like to see the normal cycle.
can you review the gas dryer in the same product line as this washer?
You know this washer would be perfect if whirlpool could get the load sens to be more accurate and be able to determine if its a small medium or larg load and go back to the 3 water level sizes while still giving the user the option to bypass the load sensing that way it meets the government epa soeca as well. I would be okay with the auto size slect if it could more accurately determine the load size. Like with moter strain or amps instead of weight because there is a lot of items that are large but dont weigh very much sonthe weight calculations are inaccurate.
If the load sensing could be better perfected with these agitator washer and havs the ability to manually select the load size the washer woukd be perfect.
Excellent machine. But I too would have an issue with it not using less water for small loads.
pat cola It would still be nice for it to have an option for small loads. I’ve seen that in commercial washers. But it’s still a very nice machine
Another "person" concerned about water usage.
Is the temperature for wash and rinse, or just wash?
Obviously great washing action but seems like it will beat the heck out of your clothes. Should be water level settings like the Speed Queen. Don't understand what water level is if you don't use deep water. Wash action seems far superior to the new 2018 Speed Queen top load washers. I cannot believe how hard it is to find a machine that actually washes your clothes. The new fangled top loaders don't do anything whether they have an agitator or not. Super unhappy with Maytag top loader I bought. Probably returning it for something else.
Just got this washer delivered today. To my surprise it doesn't agitate or spin! I just hear a hum coming from the control panel when it's supposed to be agitating and spinning. Already having to call Maytag and have a tech look at it. Very disappointing, I was looking forward to using this washer.
Turns out it was just a wire lead that came off the motor. Don't know how it happened but regardless, machine is working now and so far I'm liking it!
Thank you for your videos! I can't seem to find a lot of reviews for the Maytag and I'm trying to decide bw this Maytag, the Speed Queen LWN432SP115TW01, and the Speed Queen LWNE22SP115TW01. Do you have any opinions that would separate one of these machines as better for durability and how well it cleans the clothes? Thank you!
Which Speed Queen 2017 Model are you referring to?
Any of the 2017 or earlier Speed Queen's would be the best washer you can buy, but not their 2018. This is the one you want if a new 2018 is required.
Does anyone know how well it rinses? I have an AWN542 Speed Queen that does not rinse well and that's with using Tide he turbo and he amounts for a full load. Are them temps dumbed down?
Spin looks really slow. Clothes come out really wet? I really want this washer but cannot afford to make $800 mistake. Also, it's going to use a lot of water!!!
That's what I'm afraid of.
You care about water you must live in a water conscious area, too bad for you because I use 10,000 gallons a day.
@@chrispixxherr4650 wow, someone is a badass
In this video, you mention popping open the lid, but I never saw a lid close nor open. How are you replicating the lid closing? Is there a depression that one can push in somewhere, to do the same thing as a lid being closed?
I ask because I often use powdered additives - borax, Oxyclean, resolve gold, Calgon - or sometimes fabric dye (RIT) and all of these need to be dissolved in water and I don’t have access to any water in my basement laundry room other than via the washer (ie. no sink, no tap)
Your reply would be appreciated so much! Thx!
Sorry, I can not go into details on how to defeat the lid switch for liability reasons. The god thing is that on this washer it only locks during the spin cycle so that you can open the door during fill and agitate.
Kirk Rivas could you private message me then?
Opening the lid STOPS ALL WASHER AND AGITATION though, so it doesn’t help for the situations I mentioned above.
Can you fit a king size comforter in this machine?
It will probably fit, but struggle to wash and spin it out.
What about a queen. Do you think it would do that ok ?
Curious if you were to buy a commercial grade TL machine would you go with this one or a 2017 Speed Queen? Features Benefits, build quality comparisons?
This is a very loaded question. But I will keep it short and sweet. No doubt the 2017 Speed Queen is a great machine, but the 2017 models are just about gone. While Speed Queen is transitioning their top load washer design, Whirlpool took the opportunity to introduce a true competitor. It seems Whirlpool did their home work plus has more experience in the HE style top load washers. I look at build quality two different ways. First, I love seeing metal everything and appreciate the heavy weight of an object. This makes it feel solid, secure and strong. Secondly, on the other hand, I appreciate a well engineered machine. Not all parts of a machine need to be overbuilt. A smart design can use metal and plastics together (only reinforce what needs to be reinforced) this makes it more affordable. I'm not a mechanical engineer although I studied chemical engineering at the University of Texas (dropped out after 5 years) so I do not feel qualified to talk about build quality between the two machines. Features, in the most basic sense, are easy to compare. They both use plenty of water to wash and rinse. I like the simultaneous drain and spin of the Speed Queen(2017 only). I like the dual action agitator of the Maytag. I have owned a front load washer (Frigidaire and Electrolux) for the past 18 years. I felt pressure to buy a 2017 Speed Queen top loader before they disappeared, but after the introduction of the Maytag, the pressure went away. I decided just to keep the Electrolux front loader. Sorry for the vagueness, but I'm a dealer for both brands and my videos circulate in the corporate offices.
Thank you for posting this.Do you know if they make this in a larger capacity ?..looking for a new washer and this will be it unless they have a larger capacity one.
This design is it, Maytag has other models that are much bigger but have a different wash design.
What’s the washing cycle time ?
Can you wash a queen sized comforter in it? Thank in advance
I have a smaller model (top loader; old school) and I can do a set of twins plus a set of queen sized in one load so this baby should handle that with no problem.
Kirk, is this a real agitator or an impeller?
I've heard that some knit clothes get caught on the spinner and "run." Whats your experience with this?
The agitator seems to be doing a great job. It has been around for years (design). Some people feel that it might be too aggressive. It is designed to scrub clothes and create a lot of turnover compared to the single piece agitator.
Thank you for recording this video. I have a request: The Kenmore 20372 top load washer. Can you also do a small load of this Maytag washer? Thank you for your time.
I should be able to film a small load for this washer. Thanks for your comment.
Kirk Rivas Thank you for your reply and you are welcome.
Kirk Rivas Is this Maytag belt driven or direct drive?
I'd like to see the flow rate of the drain pump on the lg frontload washers. The top loaders will do too.
Belt
Hi Kirk, thanks for your videos! Do you how this compares to the new 2019 Speed Queen TC5 since it's supposed to be more like the 2017 model?
High LS. I'm doing the exact same comparison and I'm almost certain I'm going to get the Maytag in this video. If you Google the tc5000 and watch videos on it you can see how gentle the agitation is compared to this Maytag. There is even a comparison video between Speed Queen and Maytag commercial with white towels and ketchup that shows a drastic difference between the cleaning ability. Probably will be compromising in longevity but for me my clothes need to be good and thrashed and clean so that's more important to me.
Hello! Because SQ is still doing their 10yr warranty until the end of the year, we actually bought the SQ TC5/DC5 set yesterday! They won't be delivered until the 30th but I'm excited and can't wait to wash all the things. Where we live this Maytag is almost $1000, same as the TC5 but I was able to get the SQ set for less plus an add'l rebate through the dealer. Based on price, warranty and build I felt good going with SQ especially since I've only read good things. Let me know what you think of the Maytag if you get it! I've never been so excited or ready to wash clothes! We currently have a 2.5yr old GE front load system and despite leaving it open, bleach-cleaning it monthly and using vinegar in the rinse cycle our towels and many clothes smell musty and just ... gross. It has also had black mold issues in the detergent drawer/tunnel even when completely removing it and emptying water then letting it air dry on top of the washer. NEVER AGAIN!! I hope SQ is everything everyone says it is (except for those TR models!).
@@LucyFisher-qh2mz the warranty is a good sign for the SQ. The only thing that will probably turn me is that I wait to do a load when I have a full load and my clothes are usually good and dirty (cleaning, gardening, always spilling coffee and sometimes used instead of a napkin hehe) by the time they are being washed. If I did loads more frequently and wasn't so messy I would go w the SQ. I hope you have the experience you are hoping for. One commenter remarked that she wanted to light her washer on fire and after committing to an appliance you hope to be happy with for 10 years, I could completely feel her pain.
@@SB-iz2fk I just wanted to say we got the SQ TC5 on 11/30 and it is a dream! I am in love with it and am excited to wash clothes. Our previously mildewy-smelling and rough clothes and bath towels have come out smelling clean and softer!
Which one should I buy: this commercial grade Maytag or the 2017 Speed Queen AWNE82SP?
If you wait much longer, you will not have a choice. I'm a dealer for both brands and on this public forum It's hard to give my opinion on which one to buy. But if somebody came into my store shooting, I would feel more safe hiding behind a Speed Queen. Call me at the shop when you get a chance.
In this case, for impeding bullets but for wash performance, it's hard to beat the dual action agitator.
Great video Kirk, thanks for sharing it. Have you in the past tested the maytag 6.0 topload washer with a agitator? I'm not sure if I missed it.
I have not got one of those in yet
@@kirkrivas8172 thanks so much for the reply, appreciate it very much
I want to see powerwash.
Love your videos, Kirk. We just got one of these and it's vibrating excessively. Any idea why that might be? It's perfectly level, btw.
The floor needs to be stable, concrete slab would be the best. This machine may not be for you if your floors need to be reinforced. Older machines could overcome an unbalanced load. These newer type of machines hate a load that does not spread out evenly. Too much weight on one side of the tub will make it shake/vibrate. Try loading it differently.. Let me know how it works out. Call me at the shop if you have any questions.
@@kirkrivas8172 Thank you! The floor is rock solid, so I'm reasonably certain that that's not the issue. Was wondering if maybe something may have been shifted/unhooked/mis-adjusted in delivery or shipment. A service guy is going to have a look at it for us, though. Thanks for the quick replay!
It's a shame, this washer has a lot going for it, but I have heard of some shaking issues from a couple of people on the channel and one of my customers. My customer was not upset but noticed it shakes more than her older machine. I assumed she had an older Maytag or Whirlpool machine. She was still willing to buy another pair for her lake house but she needed stacked units.
@@kirkrivas8172 mine will shake if i throw my bathroom carpet piece in it because it becomes unbalanced but other than that all other loads are perfect. What do you think about the matching dryer with this?
It doesn't have a Clean washer button/knob. I like that. What's with the other models that have a clean button? Never had one on the older machines. They seem to have come out with the clean button on the machines that only use a small amount of water.
does this model comes with a direct drive system instead of a belt system?
Belt drive.
how'd you bypass the lid lock on this model?
You can clearly see when he is loading the jeans into the washer, the part of the switch on the lid is stuck into the lid switch hole on the body, take two screws off to accomplish this. Be warned though make sure you put the part back on the lid if it ever needs service, as this may void the warranty.
I perfer the Maytag Washer.
Hi Kirk,
Have you gotten the 6.0 cu ft Maytag in yet?
Not yet my friend. Let me sell off some of these other models and I'll bring it in.
How do you set the water level for a smaller load?
The normal cycle uses less water. If you look at the dial, all of the cycles highlighted in blue are deep wash with deep rinse. The normal cycle is less wash water and only a spray rinse.
@@kirkrivas8172 thanks!
If you select Normal cycle, how much water does it use???
I do not know the amount of water it uses, but it will not fill as high and it will do a spray rinse. I encourage my customers to use the extra rinse if they use the Normal cycle.
I read that if you use Normal cycle, it fills the tub half full for wash and half full for rinse. I really like the wash action of the 575GW but I'm concerned that it will beat the heck out of my significant other's clothes and delicates. Also, I don't like that you only have two water level choices...full tub or 1/2 full tub. The Speed Queen machines have settings for small, med. and large loads but I don't like the wash action of the new Speed Queen machines. I'm kicking myself for not buying a 2017 Speed Queen top loader. The Maytag 565FW is going back to the store. So, I have to decide on a machine to replace it. Right now, it's going to be the Maytag 575GW or a front loading washer, probably LG. If I get the 575GW and don't like it or it's too rough on the clothes, then I'm sunk because dealers that sell the machine are not going to take it back and it costs around $900 plus tax to buy locally. This is not fun at all. I appreciate what you do, Kirk.
@@irwing654 so did you get the Maytag?
@@lt38217 Was lucky enough to find 2016 Speed Queen with electronic console...brand new. 25% off list. Love it.
@@irwing654 lucky dog
Kirk, when did this machine first hit the market??? 1 year ago???
I started selling them around Nov. 2017
Kirk, got it. Did you see email I sent you??
Yes, I replied.
Can this machine handle a horse blanket?
I will throw a delivery blanket in this unit soon. I'll do the one blanket test and then the two blanket test. Even though I'm from Texas, I'm not sure how big the horse blankets are.
Probably a bit larger than a king-size comforter. I would especially like to see how the two GE units you tested earlier can handle a king-size comforter: The 4.6 cubic foot with the impeller, and the 4.5 cubic foot with the agitator. I really want to see if buying one of those machines would save me money over a front loader. I'm guessing it would be best to wait, and save up for the front loader.
Apparently I am losing it from watching these videos bc I keep expecting this question to go to the ridiculous like can I wash a drum full of legos or my neighbor's cat.
Kirk did you know maytag works better than speed queen
Great washing action but looks like the machine tangled up those jeans pretty good. I didn't see any indication that they came out "dripping wet." Right now, my head is spinning. No clue what machine to buy. Time to sleep on it.
We sold plenty of these machines, one had a problem, the shifter was bad, but it was intermittent so it was hard to diagnose but we finally solved the problem. You can buy the Maytag with confidence.
Thanks for the input, Kirk. What really scares me about the Maytag is the slow spin speed issue. If the clothes come out of the washer "dripping wet," they will take much longer to dry and shorten the life of my dryer as well. I might spring for a Speed Queen TR7 but I just can't get past that washing action. Recently, I was told by someone in the appliance business, "I would not buy a Speed Queen and I am not selling the new Speed Queens to my customers...period." I'm ready to buy an Amana washer for $399 and call it a day. Throw it away when it breaks in a year or two.
@@irwing654 i called my plumber to make sure our old house could handle the draining from a Speed Queen and told him what I was debating between, and he told me he got a $400 Amana to do the shop blankets and he thinks it's GREAT. I'm even more confused.
How big is the motor on this washer?
HALF HORSE POWER
Thank you. Happy Thanksgiving!
You too.
Heck of a nice machine but uses a ton of water.
It uses enough water to actually CLEAN clothes! Most HE machines today couldn't wash two socks!
Exactly as music nerd says, why are people concerned about water usage, I use a lot of water my water bill is like $45 every 3 months.
Noise level is not for faint of heart. I want to watch the wash action. Damn you magnetic lid switch.
Somewhere on UA-cam I saw someone place a magnet on another brand machine where the lid closes on top of the magnetic latch. It fooled the machine into thinking the lid was locked. But I thought on this Maytag the lock only locked during spins?
this machine sucks. did it even pull anything down? seems it just spun it around and around
Apparently you didn't pay much attention.
bogus696996 your opinion is invalid.