How to bind your Jumper T-Lite to a Receiver? (Moblite 7 | Betaflight)
Вставка
- Опубліковано 13 вер 2024
- Timestamp
Step 1: Create Model 0:15
Step 2: Select and Setup Internal Radio Frequency for a receiver 0:30
Step 3: Setting Up Radio Switches (From A to D) 1:12
Step 4: Bind with a drone 3:00
Step 5: How to Changing Receiver Behavior in Betaflight? 3:29
Tips:
1. When I was trying to connect the Moblite7 with my computer, I had a "Connection Failed" Issue, I could solve it by changing a USB cable.
2. The drone won't arm because the gimbal setting was wrong. Change the order of the channel map helped.
Famous people who want money do small reviews guys like u make it easy for us thank you
Thank you so much for this. The Jumper T-Lite comes with basically zero documentation, this 4 minutes saved me several hours of trial and error.
Dude i was so frustrated because nothing worked like it should, but then i found our video Thank you soooo much!!!!
Wow, EXactly what I needed to see. I just got my first radio (T-lite) and have been using spectrum for many years. I feel like I'm learning French!
Wonderful job! I love your ultra sharp focus and exposure, with great color saturation. Your voice is slow and clear. Instructions are very well done with easy to follow, step by step procedures. I was so impressed, that I subscribed immediately. Keep up the great work, and thank you for this contribution to our hobby! - Jim
robot robot -
Great tutorial, easy to follow and was able to fly immediately after following your steps. Thanks!
You just saved 25,000 people so much time
When I get to binding (3:00) and scroll up, my T-Lite only shows receiver [00]. There is no binding option. How can I resolve this? Thanks.
I am having the same issue, did you find a solution to this by any chance?
Perfect, thank you!
thank you so much !! good job !!
You forgot 1 thing. To bind it to the receiver. The moment you should bind it you jump to betaflight.
And why setup switches when you don't use them?
thanks for this video you're awesome !
i dont think my jumper bound i don't know why i followed all instructions :(, great video none the less
Seriously you deserve more subs thank you.....I managed to bind my controller with my hubsan and everything works perfect except tx keeps warning me of "Critical RF" any ideas why?
Not sure why, but I'm gonna get back to you.
I found this article: www.reddit.com/r/fpv/comments/fwrguw/jumper_t16_pro_low_critical_rf_warnings/
Maybe try telemetry off? If you are using D8, it should be off by default.
Спасибо! Полезное видео помогло мне разобраться с настройками. Желаю удачи!👍
Thanks for that fella
so nice video. Thank you very much.
Thank you~!!!!!!!!!!!!!! bro
very well explain thank you for this video
Спасибо большое. Очень помог. 👏
Guys, please help me. How do I connect the Jumper T-Lite to my Speedybee drone. It is on the TBS crossfire protocol, but I cannot find one on the controller. thank you
I still don't know how to get the quad to attach to the controller.
👍
How do I know my subtype? I use a zorro. But I have the same menu.
Do I need to go into beta flight? Thanks for the video
I don't think so, I think it was just to show a demonstration of a drone that is actually receiving input from the remote.
Yes,if you want to change the switch position
My versión IS the cc2500 and i don't find the bind
Can anyone help me iv got a qx95 it's got a spectrum receiver I'm not sure what to do IV binded toy drones to jumper t lite but never a spectrum receiver thanks
how come your channel inputs don't jitter much?
Muito obrigado por esse vídeo valeu 👏👏👏👏👌
I followed your instructions and my switches still don't move the bars while b flight in receiver tab. I'm beginning to really hate this radio, I mean, no instructions? The quick start paper is a joke. You should make a video and call it the "un official manual". Any help appreciated.
Did you try to change the swrich order in beta flight? It happened for me as well. I was able to let it move after change beta flight receiver configuration.
Mine came with an instruction page saying to use external rf but it only works with internal whats with that anybody know
Hello, is this setting works for rc helicopter like say a omphobby mi .
Bought one and had a lot of trouble in configuring it. First it wouldn't arm. Entered in betaflight and changed the min check throttle to a higher number than 1000 (I think I put 1100) and got to arm it and "fly" it but the commands are turning opposite sides as they should. Tried calibrating the z rotation in betaflight and nothing. Tried also setting in beta the inverse rotation of motors (my moblite came rotating outside, is that normal?) and nothing. Also, its very strangely calibrated and well, all these problems. Tried flashing the firmware! but the bootload mode won`t start.... the manual is very confusing and has ambiguous and non working indications. Can someone help me??? I'd love to just have a straightforward method and boom, fly it!!! Thank you in advance!!!!
Doesn't actually show how to bind on the Moblite7 end...
Thanks. How did you do to have no splash screen on your kumper and to have that screen with the stick possiton? I have a splash screen and then a screen with the stick values.
already got it, thanks.
how to adjust the min of each channel to 1000 and center to 1500 and the max to 2000 value ?
I learned the basic setup thanks. But Will it bind to geprc tinygo? Have not watched any video that can do it.
It will not. They use their own reciver that only work with their controller.
Thank you. I will not put effort in binding it.
Good afternoon, do you think this radio will give compatibility issues with frsky recent receivers? I know from personal experience that the BETAFPV Literadio 2 se is a no go....
The frsky recievers d8 binds right up, it's the only receiver that i got it to bind with. My flysky, walkera and of course the dsm2 spectrash won't bind at all. But no manual is the real problem here don't you think?
@@thatman8987 well it’s a open tx so I guess you can refer to all the videos about pretty much any taranis tbs tango jumper radiomaster but you are still right. I personally managed to bind it to a frsky spi rx (Mobula 6), to a frsky rsxr (Nazgul5) and to a Radiomaster R81 (3” custom build). The binding process was sh*t and frustrating on all of them but I managed
Can just mode crsf
is it a good controller compare with beta fpv's?
mine has been beeping for 20 mins
Is there a full instruction manual I can download from somewhere
Not from what I could find off the jumper site, or at least on the English side of it.
Hi!
I can bind the Beta65s Whoop, with SPI Frsky D16 receiver th the 4in1 module?
It should. There is option Fryskyx you will see D16.
@@startfpv574 I hope it will work...
Hi again I have a issue with binding my Jumper T Lite with my R XSR receiver, I go through the normal bind procedure but no stick movements are working in betaflight im not sure what to do any advice would be much appreciated thank you, this is a different quad then my other message this is my first fpv drone and I'm stuck at this point
Did you try to change layout option?
@@startfpv574 No I have not where do I find that betaflight? What should I set it to?, I'm a complete knoob as you can see lol
@@tecnikturbo This might be the solution. ua-cam.com/video/YnEDqGZwPpo/v-deo.html
@@tecnikturbo but before you try the stuff in the vedio, try to set the receiver to SBUS, and make sure your UART is correct, and in the receiver tap, make sure your channel map is correct.
@@tecnikturbo I know, I'm new too. Each time I fly I crash, and i have fix the drone :(
I hit the like button but why you think you are so smart to hit the dislike button twice
my drone just keeps beeping help
Check the beta flight for beeper. I had same issue before, one of my Aux switch was set on beeper. Try to flip the switch to see if that is the cast.
@@startfpv574 ty it worked
@@cylas LOL cool.
How do you put the moblite 7 in binding mode?
Press the little button on board
@@startfpv574 I couldn't find the button. Is it on the downside or upside? Thanks
@@reinaldostrobel81 bottom, where the usb port is. Next to the usb port, there is a big chip the bottom is next to the chip.(not the one next to the usb port)
@@reinaldostrobel81 www.getfpv.com/happymodel-diamond-f4-fr-5-in-1-aio-flight-controller-w-built-in-esc-vtx-receiver-spi-frsky.html
@@reinaldostrobel81 check this link,go to description, there are diagrams ,BIND is the bind button
I wanna jump into fpv. How do you know this is the correct setup, Frsky, etc. Does the quad have specs on the manual. Thanks
i just gotten into fpv in january and this is all i learned
alway start with simulator if you do not want to fully commit into the hobby because it is pretty expensive for me atleast
start with a simulator i recommend drl simulator
it really helped me get a head start
please correct me if im wrong this is all i learned while i was in the hobby it is not a perfect explaination because im filipino my english isn't great
Main things you need to fly
fpv drone
transmitter/controller/radio
fpv goggles
batteries and chargers
first lets talk about radio/ transmitter
there are different radios with different receiver thats basically how the drone and radio talk
the most famous ones i know are
these are the radios
There are different kinds of controllers
here are the most popular i know
Flysky are cheap and reliable they have other high end models too
frsky are the company standard they have good build quality
radio master are multiprotocol which means they can bind to other brand radios
these are the receivers
Flysky - budget friendly more cheap
frsky d8 / d16 - Hobby standard
dsmx - always see it but not very familiar with it
Radiomaster radios are popular too and have multiprotocol/multi languanges they have many different languages they can bind to flysky/frsky and other things just read the product description
TBS crossfire - its a type of protocol you put on your radio that is for long range and is expensive perfect for the guys who are really into the hobby
drones there are many kinds of fpv drones
there are
Tiny whoop - in my opinion ideal for beginners who dont want to spend much money if they want to try it out cheap
3 inch toothpicks - a little bit more expensive and powerful but flies like a 5 inch
5 inch there are 2 categories i learned - they are expensive and powerful
there are
5 inch racers - light and agile for racing
5 inch freestyle - a bit heavier for smoother filming and for freestyling. freestyle is basically parkour for drones
6 or 7 inch long range drones - i only know a few about them
they have bigger motor and bigger propellers for more effiency they are big and sometimes have gps
acronyms
BNF means bind and fly drones they are prebuilt drones that have a receiver in them so you just bind them and fly right away
vtx means video transmitter they are the one sending signal to you goggles
rx means the receiver in the drone where your radio connects
tx is the radio
fpv camera is the camera in the drone so that you can see
betaflight - is the most well known configurator for fpv its a software in your computer you can download its basically a control room
osd - on screen display on the goggles its the statistics of your drone thats where your voltage is flight time and other stuff
voltage sag - means the voltage drop
dvr or digital video recorder these are the one that records the screen in your goggles so that u can see your flight they are sometimes built in
in goggles but some dont have dvr
batteries
there are different batteries for different drones
the one most used in fpv drones are lipo batteries there are many lipo battery
there are
1s or 1 cell lipo it has 4.2v - mostly used on tinywhoops
2s or 2 cell lipo it has 8.4v - used on tinywhoops and toothpicks
3s or 3s cell lipo it has 12.6v - used on toothpicks and 5inch drones
4s or 4s cell lipo it has 16.8v - used on some toothpicks and the most common battery for 5 inch drones and some long range drones
5s lipo i never hear much of
6s lipos are crazy powerful and used on racing 5inch drone and long range drones
connectors of battery
ph 2.0 - mostly used on 1s batteries that are used on tinywhoops
bt 2.0 used on tiny whoops mostly from the brand betafpv
xt30 very popular and used on toothpicks mostly used on 2-3s batteries
xt60 much bigger than the xt30 mostly used on 4s-6s batteries
fpv goggles there are 3 types of fpv goggles
there are
Box goggles, binocular goggles and digital goggles
box goggles and binocular goggles have analog signal meaning they have less latency but low reso video feed
digital goggles are goggles that have a digital signal and hd video feed
Box goggles are big goggles that have a single screen in them
binocular goggles are small and slim goggles that have a screen on them
digital goggles have hd screens on them and are much more expensive
box goggles are cheaper while binocular goggles and digital goggles are more in the high end
there are things that are challenging for fpv than normal dji drones
there is modes of movement
there is
angle mode - angled mode that is stable
acro/air mode fully manual mode mostly used by all the fpv community allowing for more precise and free moves
horizon mode its like half angled and half acro you can flip but will stabilize
Look at the listed specs for your model drone or if your receiver is separate you can look at it.
Yes, Most popular and decent receiver is frsky and flysky..there is also a advanced module receiver like tbs crossfire
Why tf does this make no sense. What is a channel used for! This shit is so complicated how does anyone figure this out
Another thumbs up from me. Hit the dislike button twice 🤭 and suscribed.
man slow down ,,terrible to follow ,,thanks but so difficult to follow